How to find out more info about an existing fault
Hi there,
The whole village of Luib on Skye has been cut off because the main road was being resurfaced and the machine digging up the tarmac ripped up and mangled the main phone cable on 30th March. (Not the road menders' fault, but BT's because they never buried the cable properly. In fact, they didn't bury it at all, just hid it in the verge.)
I have logged the fault on my line and can get a standard amount of info using the online fault tracker. The thing is that all that's available is a standard message saying the phone is expected to be fixed in 3 working days. We (the villagers) don't think this is likely: It's happened before and BT need to order up a supply of the thick cable AND arrange traffic lights etc. We fear it's more likely to be a couple of weeks at best.
How can we find out more useful information? I tried phoning BT and pressing various buttons, just got the standard fault info, then was asked if I wanted to continue. When I pressed 2 for "yes" a voice said "Thank you for calling BT - Goodbye." That wasn't the sort of continuation I wanted!
I have to say that we are heartily sick of the poor treatment we get here on Skye. BT seem to think that because we in a remote place we are not a priority. But consider this: Luib has both private houses and businesses, including mine, that need a phone service and broadband, credit card faciilities etc. and WE DO NOT HAVE ANY MOBILE PHONE SIGNAL. This means we are totally cut off. What if there is a medical emergency?
OK: Rant over. But can anyone suggest how I might escalate this and/or find out some solid information. If it turns out there's a wait of a couple of weeks is there any way of putting pressure on to speed things up?
Many thanks.
I take it you've tried this - http://community.bt.com/t5/Phones/How-do-I-track-an-existing-fault/td-p/6
Not sure if contacting the mods would help you further than the faults team could.
Check your exchange or major service outagesIf someone has given a helpful answer, please click on their Ratings star on the left-hand side. ***
Similar Messages
-
How to find out the info regarding Solaris, server hang or shutdown.
Hi
As I am handling the Solaris 9 Server remotely.
As in last week the server has stopped to respond suddenly, we have tried to ping, ssh which was not working. As ultimately we have asked the Data Centre Team to hard reboot the same, to resolve the issue.
In the same ref I would like to know how we come to know the reason, what caused to reboot the same, i.e . any log file, etc..
I have check /var/adm/messages, but not found any detail for the same.
Thanks
Rajan
INo core files?
No hope for an answer.
As you learned in the other Internet forum.
http://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-out-the-info-regarding-solaris-server-hang-or-shutdown.-621500/
To get such corefiles analyzed,
you would need to use your service contract and log a support case with Sun.
They have the special software tools to do that. -
How to find out user info for a forecasted value
Hi Experts,
Suppose, a user plans on a planning application and consequently creates some forecast values. How do i find out which user did the planning? Is there any way to know this? Please let me know of this if anybody knows.
Regards
SwaroopHi, I'm using BPS so can't say forIP. But if you really want to see who posted which data, the planning application has to be set up that way in order to capture the user, time, date details, as indicated by the previous post. This will ptentially of course create very many more records in some cases, where data is amended.
But your post also requested info about who ran which planning functionality, and when. You can get this sort of information in BPS from the transactions BPS_STAT0 and BPS_STAT1. You may want to narrow the amount of analysis using the username/ date /time filters.
Stephen -
How can i get more info about the sent data in RTP?
Hello.
I'm working with the examples AVTransmitt2 and AV Receive2 and i want to get more information about the data that it is being sent to de receiver side. In AVTrasmitt2 i only see a calling to processor.start();. How could i know each packet that AvTransmit2 sends to the other side. I want info like the size of the data, the quality, format, etc..Hi!
As I mentioned above. RTPSocketAdapter has two inner classes, SockOutputStream and SockInputStream.
SockOutputStream have a write method which is called when RTP data is sent over the NET. SockInputStream have a read method which is called when RTP data is received.
If you for instance want to know exactly what is sent you can parse the byte array that comes into write.
Like this:
* An inner class to implement an OutputDataStream based on UDP sockets.
class SockOutputStream implements OutputDataStream {
DatagramSocket sock;
InetAddress addr;
int port;
boolean isRTCP;
public SockOutputStream(DatagramSocket sock, InetAddress addr, int port, boolean isRTCP) {
this.sock = sock;
this.addr = addr;
this.port = port;
public int write(byte data[], int offset, int len) {
if(isRTCP){
parseAndPrintRTCPData(data);
}else{
parseAndPrintRTPData(data);
try {
sock.send(new DatagramPacket(data, offset, len, addr, port));
} catch (Exception e) {
return -1;
if(debug){
System.out.println(debugName+": written "+len+" bytes to address:port: "+addr+":"+port);
return len;
private void parseAndPrintRTPData(byte[] data) {
// part of header, there still left SSRC and CSRC:s
byte[] rtpHeader = new byte[8];
System.arraycopy(data, 0, rtpHeader, 0, rtpHeader.length);
ByteBuffer buffer = ByteBuffer.wrap(rtpHeader);
int word = buffer.getInt();
// version
int v = word >>> 30;
System.out.println("version: "+v);
// padding
int p = (word & 0x20000000) >>> 29;
System.out.println("padding: "+p);
// extension
int x = (word & 0x10000000) >>> 28;
System.out.println("extension: "+x);
// CSRC count
int cc = (word & 0x0F000000) >>> 24;
System.out.println("CSRC: "+cc);
// marker
int m = (word & 0x00800000) >>> 23;
System.out.println("marker: "+m);
// payload type
int pt = (word & 0x00700000) >>> 16;
System.out.println("payload type: "+pt);
// sequence number
int seqNbr = (word & 0x0000FFFF);
System.out.println("sequence number: "+seqNbr);
// timestamp
int timestamp = buffer.getInt();
System.out.println("timestamp: "+timestamp);
private void parseAndPrintRTCPData(byte[] data) {
// this only works when the RTCP packet is a Sender report (SR).
// All RTCP packets are compound packets with a SR or Receiver report (RR) packet first.
// part of header, there is still the report blocks (see RFC 3550).
byte[] rtcpHeader = new byte[28];
System.arraycopy(data, 0, rtcpHeader, 0, rtcpHeader.length);
ByteBuffer buffer = ByteBuffer.wrap(rtcpHeader);
int word = buffer.getInt();
// version
int v = word >>> 30;
System.out.println("version: "+v);
// padding
int p = (word & 0x20000000) >>> 29;
System.out.println("padding: "+p);
// reception report count
int rc = (word & 0x0F000000) >>> 24;
System.out.println("reception report count: "+rc);
// payload type, which is 200 in this case (SR=200)
int pt = (0x00FF0000 & word) >>> 16;
System.out.println("payload type: "+pt);
// length
int length = (word & 0x0000FFFF);
System.out.println("length: "+length);
// SSRC of sender
int ssrc = buffer.getInt();
System.out.println("SSRC: "+ssrc);
// NTP timestamp
long ntp_timestamp = buffer.getLong();
System.out.println("NTP timestamp: "+ntp_timestamp);
// RTP timestamp
int rtp_timestamp = buffer.getInt();
System.out.println("RTP timestamp: "+rtp_timestamp);
// sender's packet count
int nbrOfSentPackets = buffer.getInt();
System.out.println("sender's packet count: "+nbrOfSentPackets);
// sender's octet count
int nbrOfSentBytes = buffer.getInt();
System.out.println("sender's octet count: "+nbrOfSentBytes);
}I added a boolean isRTCP to the constructor so to know what sort of data is sent.
Hope this clarifies things. -
I would like to find out more information about certain security updates before I apply it.
In the Software update window, it said that "or information on the security content of this update, please visit this website: http://support.apple.com/kb/HT1222".
I went to that website and there is no information about this update. It just shows the general info about all updates ....Scroll down the page to the table, select the relevant update and click the blue text in the left column to be taken to the page with specific info for that update.
-
How to find out if a structure already exists in DDIC
Hi all,
I want to find out if a structure or table type already exists in the DDIC. I intend to use the DDIF_TABL_GET function module and catch the exception raised but I am not sure if this 'illegal input' exception is only raised if a structure does not exist in DDIC. Is it the right way or is there a function module or static class method which can return me this info stg. like DDIC_OBJECT_EXISTS or not . I have the same problem for the table types too, but I think the solution must be similar...
Kind Regards,
Sükrü Ilker BirakogluHi all,
Thank you for your answers. I also found an alternative way for solving the problem. If you call the function module DDIF_TABL_GET with the state parameter set to 'M' (get the object regardless of its state(active, new)), the export parameter GOTSTATE shows us if the object in DDIC exists or not(if this parameter is space, then the object does not exist).
Kind Regards,
Sükrü Ilker Birakoglu -
How to find out the DPI of an existing PDF doc?
When I print a doc/web page with a pdf printer driver then I can adjust the DPI for the print.
Ok. But how does this work the other way?
When I have a pdf doc and want to find out the DPI with which it is printed ?
How can I find out this value?
MatthiasPDFs do not have a dpi. Only individual raster graphics in a pdf have a
resolution. In a single pdf there can be several different raster and
vector graphic objects.
The Acrobat application doesn't control the dpi that a printer uses to
rasterize a printed pdf file. That is done by the printer driver---most
often an OS function. The dpi uses to print a pdf has nothing to do with
the pdf specification.
Mike -
How to find out the list of field exists for a particular transaction
Hi all,
Can u please help me find out the list of field exits available for a particular Tcode?
Is it similar to User exit or . . . . ?
Thanks,
C.Selvaraj
SAP-QMCreate a program and add this code to find user exit
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
select single * from tadir where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir where pname = tstc-pgmna.
select single * from enlfdir where funcname =
tfdir-funcname.
select single * from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name eq enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
select * from tadir into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct where sprsl eq sy-langu and
tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ', "#EC NOTEXT
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name', "#EC NOTEXT
21 sy-vline ,
22 'Description', "#EC NOTEXT
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill. "#EC NOTEXT
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'. "#EC NOTEXT
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'. "#EC NOTEXT
endif.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Rewards if useful........................
Minal -
How to find out the RFC in an existing BOP
Hello
Is there a way to find out what RFC is used by an existing BOP?Okay, i found the table it's apparently stored in: /IWFND/D_BOPR
But i would still like to know if there is a "normal" way to manage them. -
How to find out who is owner of existing workspace?
Hello, I would like to create Workspace. But this WS name is already exist. Can I find out who is owner of this WS?
Thank you,
TomasTomas,
You can't find out who has the name, it would compromise the security of the system - you will have to pick another name I'm afraid.
Phil -
I tried each of the available exportformats: .doc, .docx, .xls, .rtf. None of them worked, which only the message "conversion failure".
Hi bergmanc,
It sounds like there may be an issue with the file that you're trying to convert. Have you tried to convert other files? If so, are they converting without error?
Please tell me a little more about the file that you're trying to convert. For example, what is its file size, how many pages does it have, are there lots of graphics, or a mix of fonts? If the file is complex, it may be that the ExportPDF service is timing out before it can complete the conversion process. It also possible, that the PDF may not be written properly, if t was created by a third-party appellation.
You can simplify the conversion process by disabling OCR as described here: How to disable Optical Character Recognition (O... | Adobe Community (but this solution isn't optimal if the PDF was created from a scanned document.)
Please let us know a bit more about your file, and we'll see what we can figure out.
Best,
Sara -
How to find out the path of already existing directory?
I need to get the exact path of 'FCO_DIR' directory. Could you please help me out with this.
Is there any table name or a quey that I can run to get this information?
Below is the code that I am using :
Code:
l_input_dir CONSTANT VARCHAR2 (30) := 'FCO_DIR';
l_input_file CONSTANT VARCHAR2 (30) := abc_ca_upd.dat';
fhandle := UTL_FILE.fopen (l_input_dir, l_input_file, 'r');
Thanks in Advanvce !!900811 wrote:
I tried running this query in production. I am getting error message ORA-00942: table or view does not exist
Does this require DBA privileges ?As mentioned before, this should not require "DBA privileges", whatever that means, but it requires rights to query the view (think least privileges principle).
Did you try querying ALL_DIRECTORIES instead? (or USER_ equivlent)
In dev environment, I am getting the correct results.What is the output from ALL_DIRECTORIES in dev? -
How do find out failure in invoking a partner service from BPEL
Helllo,
When running my SOA composite I encountered the following error. I haven't found out how to find out what exact host:port it is trying to hit and failed. Does anyone know how to find out this info or from which deployment/admin interface can I find out information related to the partner service, such as wsdl, host/port, and other parameters?
thanks,
Joe
Non Recoverable System Fault :
<bpelFault><faultType>0</faultType><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>oracle.fabric.common.FabricInvocationException: Unable to find the WSDL port defined for service {http://xmlns.oracle.com/scheduler}ESSWebService and port {http://xmlns.oracle.com/scheduler}SchedulerServiceImplPort. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.</summary></part><part name="detail"><detail>Unable to find the WSDL port defined for service {http://xmlns.oracle.com/scheduler}ESSWebService and port {http://xmlns.oracle.com/scheduler}SchedulerServiceImplPort. Please make sure that the port attribute for the binding defined in the composite file is correct by checking the namespace, service name, and port name. In addition, check that the WSDL associated with the binding namespace is imported and currently reachable (check the import nodes at the top of the composite file). Finally, validate any HTTP proxy settings for the server.</detail></part><part name="code"><code>null</code></part></remoteFault></bpelFault>Your SOA project should have a somethingRef.wsdl where you can find the location of your WSDL.
<wsdl:import namespace="http://www.example.com" location="http://example.com/example.do?wsdl"/>
In the actual WSDL (not the ref) you may have your actual servername/portname in the tag address at the end of the file...
<WL5G3N0:service name="example">
<WL5G3N0:port name="exampleSoap" binding="WL5G3N2:exampleSoap">
<WL5G3N3:address location="http://example.com:6011/services/example"/>
</WL5G3N0:port>
</WL5G3N0:service> -
How do i find out more about one on one
how do i find out more about one on one
Hi,
Silverlight is a powerful development tool for creating engaging, interactive user experiences for Web and mobile applications. Silverlight is a free plug-in, powered by the .NET framework and compatible with multiple browsers, devices and operating systems,
bringing a new level of interactivity wherever the Web works.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How do Ii find out more about the program?
Please help me find out more about the benefits and how it works?
Hi,
Silverlight is a powerful development tool for creating engaging, interactive user experiences for Web and mobile applications. Silverlight is a free plug-in, powered by the .NET framework and compatible with multiple browsers, devices and operating systems,
bringing a new level of interactivity wherever the Web works.
http://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
HR authorization for more than one personnel number
Hi, We have some employees created in system assigned to two personnel numbers, because for example, we have some cases that the employee is active, but he is also created in system as pensioner. In spite of this, the infotype 105 is only created for
-
Creating an expandable text field without a scrollbar
Hi All! Hope someone can help. I need to create a flowable subform that will allow text fields to expand without a scrollbar. I have been researching the forums and have found this thread: http://forums.adobe.com/message/2372965 When modifying the te
-
Numbers in a mixed environment
We are working on getting our friend switched over to Mac. We've replaced two of his PCs with Mac Minis. They have Excel documents on the server, that people edit on both PC and Mac. When I open the XLS document on the server in Numbers it looks grea
-
Importing of files hangs on finishing
When I try to import photos into a new iphoto library, everything works great up until when it says Finishing import. Then it just hangs... I am running 10.5.1 (fresh install) Here is the message I get in Console: 23.11.07 15.48.51 iPhoto[250] * -[NS
-
How to get a 74 min. audio into 700 megs?
I'm setting up a piece to market through outfits like CreateSpace. It is a 74 minute piece of music designed to put people to sleep. It seems to work well at 74 minutes, hundreds have tried it over the years, and swear by ... so I'm going to try an