How to find out, which RFC-Destinations are in use?
Hi community
We have a huge list of RFC-Destinations in our productive system and I want to delete unneeded entries.
Is there a report or a log, which shows, which RFC-Destinations were used, and when?
Thanks in advance.
Regards, Michael
HI
can you see the default trace in tcode SMGW, Be careful about deleting any system rfc.
Read the documentation about default RFC, internal RFC, LDAP_RFC, transport RFC.
I don't know other way to do that you need
Regards
William Neira
Similar Messages
-
How to find out Which SAP programs are affecting Which Z programs?
Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
VishnuDo we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other? I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu -
How to find out which sequence a certain column used?
you konw column C in table T is created by a sequence.
How to find out which sequence column C is using?In the meantime I think it ought to becompulsory to
only assign sequence values in triggers.
Why? I can see no good reason for this. I think it's a good idea to have stuff like this
coded in only one placeI don't like your argument for compulsory using triggers for sequences for exactly the same reason as you, ie that I like to keep my code in one place. If I'm reading some pl/sql code which uses a sequence I like to see the fact that the sequence is used in the pl/sql code, rather than to check to see if theres a trigger on the table and then see which sequence that uses.
"naming conventions can work, provided they're enforced. Alas, like other standards, they can only be enforced by active policing".
Thats what code reviews are.
" there is also the special case of one sequence populating more than one table...."
This is My Pet hate. I don't think there's ever a case where this is absolutely necessary. Again code reviews
Unfortunately I have to live with a system which does this.
and I appreciate we can't all have code reviews, etc. -
Find out which charateristics that are in use
Hi
We use classes linked to our document types.
And the classes has a lot of characteristics.
Is there an easy way to find out which characteristics that are in use (documentens where values are given), and on how many documents they have been used on?
Best regards
Tom SagaSee if table AUSP serves your purpose.
Regards,
Pradeepkumar Haragoldavar -
Is there a way to find out which CSS rules are being used by the different html files?
Is there a way in Dreamweaver CS3 to find out which CSS rules are being used by the different html files, sitewide?
Thanks - DaveFirefox add-on "Web Developer Toolbar" is a must have. Information > Display Div & Class details.
https://addons.mozilla.org/en-US/firefox/addon/60
Another handy Firefox Add-on to add to your tool chest is called "Dust-Me Selectors."
http://www.sitepoint.com/dustmeselectors/
"It extracts all the selectors from all the stylesheets on the page you're viewing, then analyzes that page to see which of those selectors are not used. The data is then stored so that when testing subsequent pages, selectors can be crossed off the list as they're encountered.
You can test pages individually, or spider an entire site, and you'll end up with a profile of which selectors are not used anywhere."
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
HOw to find out the RFC destination from BW system to ISU
Hi,
Currently my requirement is to call a function module which is written in ISU (remote enabled) from BW system.
I am unable to find out the rfc destination from BW to ISU system.
In CRM we have table like smofparsfa1. Is there any table in BW which can provide me the ISU destination?
I need to compare the records stored in isu as well as in BW system.
I need to call a function module which will provide me the data from isu.
please help me in this regard.
KrishnaHi,
You can check it in SM59 if there are any RFC destinations for the above systems.
Alternatively ,check the table RFCDEST if any entries are maintained
Regards,
Lakshman. -
How to find out which materialized views are running on the DB?
So I have a long list of MVs stored on the DB.
Is there a script to find out which MVs are being refreshed right now?
Help!
ThanksHi ,
You can use the following data dictionary view to get information on when Mview was last refreshed--
SQL> desc DBA_MVIEWS
Name Null? Type
OWNER NOT NULL VARCHAR2(30)
MVIEW_NAME NOT NULL VARCHAR2(30)
CONTAINER_NAME NOT NULL VARCHAR2(30)
QUERY LONG
QUERY_LEN NUMBER(38)
UPDATABLE VARCHAR2(1)
UPDATE_LOG VARCHAR2(30)
MASTER_ROLLBACK_SEG VARCHAR2(30)
MASTER_LINK VARCHAR2(128)
REWRITE_ENABLED VARCHAR2(1)
REWRITE_CAPABILITY VARCHAR2(9)
REFRESH_MODE VARCHAR2(6)
REFRESH_METHOD VARCHAR2(8)
BUILD_MODE VARCHAR2(9)
FAST_REFRESHABLE VARCHAR2(18)
LAST_REFRESH_TYPE VARCHAR2(8)
LAST_REFRESH_DATE DATE
STALENESS VARCHAR2(19)
AFTER_FAST_REFRESH VARCHAR2(19)
UNKNOWN_PREBUILT VARCHAR2(1)
UNKNOWN_PLSQL_FUNC VARCHAR2(1)
UNKNOWN_EXTERNAL_TABLE VARCHAR2(1)
UNKNOWN_CONSIDER_FRESH VARCHAR2(1)
UNKNOWN_IMPORT VARCHAR2(1)
UNKNOWN_TRUSTED_FD VARCHAR2(1)
COMPILE_STATE VARCHAR2(19)
USE_NO_INDEX VARCHAR2(1)
STALE_SINCE DATE
SQL> -
How to find out which C library I am using?
On my Solaris 9 UltraSparc system,
% echo $LD_LIBRARY_PATH
/opt/gcc/3.4.4/lib:/opt/glib/2.12.1/lib:/opt/gnome/lib:/opt/openssl/0.9.7g/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Solaris 10 x86 system,
% echo $LD_LIBRARY_PATH
/pkg/gcc/4.2.1/lib:/opt/gcc/current/lib:/opt/glib/2.10.1/lib:/usr/sfw/lib:/usr/lib/mps:/opt/openldap/lib:/opt/openssl/current/lib
% /usr/lib/libc.so
usage: ld.so.1 [-e option,...] dynamic-object [object args,...]
On my Linux/x86 system,
% echo $LD_LIBRARY_PATH
/opt/openssl/0.9.7g/lib:/opt/gcc/3.4.4/lib:/opt/binutils2.13/lib:/opt/glib/2.12.1/lib:/opt/java/j2sdk1.4.1_01/lib
% /lib/libc.so.6
GNU C Library stable release version 2.6.1, by Roland McGrath et al.
From the above, can one tell what C library I am linking to on the Solaris systems? If not, how can one tell? How do I know the exact location of the C library I am using?
On the Linux/x86 system, I can use gnu_get_libc_version() to find out the version of glibc I am supposedly using. But it does not work when I compiled the identical C program using gcc on the Solaris 9/UltraSparc and Solaris 10/x86 systems. If I can use gnu_get_libc_version() , does that mean for sure that my C program links to glibc? On the other hand, if the linker reports that gnu_get_libc_version() is not found, does that mean for sure that my C program is not linked to glibc?
Is there a function on the Sun libc similiar to gnu_get_libc_version()?
http://docs.sun.com/source/819-3690/Using.Libs.html says "The Solaris operating system comes with several libraries installed in /usr/lib. Most of these libraries have a C interface. Of these, the libc and libm, libraries are linked by the CC driver by default." If one wants to link to the glibc library, how to override the default? How to find out the default? Is it in some environ variable? If one changes the CC driver to gcc, does the default remain the Sun libc? And if one compiles explictly using gcc, i.e. "gcc myprog.c", is the default C library the Sun Library, or glibc?
gnu.org has a (web page for the) glibc manual but I am not able to find a Sun C Library Manual. Is there one?
Edited by: hzmonte on Jun 28, 2008 1:43 AMI'll discuss only the Sun C compiler here. For questions about gcc, look in the gcc manual, or try a gcc forum.
Run the command "ldd" on an executable file or shared library, and it will report the shared libraries that it will link to, based on any runpath in the file, and on LD_LIBRARY_PATH. Example: % echo $LD_LIBRARY_PATH
LD_LIBRARY_PATH: Undefined variable
% cc hello.c
% ldd a.out
libc.so.1 => /lib/libc.so.1
libm.so.2 => /lib/libm.so.2
/platform/SUNW,A70/lib/libc_psr.so.1 BTW, except possibly for testing, there is usually no need to set LD_LIBRARY_PATH, and setting it is usually a bad idea. For more on this topic see Rod Evans' blog:
[http://blogs.sun.com/rie/entry/tt_ld_library_path_tt]
Prefer to set a runpath in the executable so that no client needs to set LD_LIBRARY_PATH.
If you want to know what libraries the C compiler will link, based on a given command line, you can add the -v (verbose) option, which will display each subcommand. Or you can use the -### option, which shows what commands would be run. Example: % cc -### hello.c
### Note: NLSPATH = \
/opt/SUNWspro/prod/bin/../lib/locale/%L/LC_MESSAGES/%N.cat:/opt/SUNWspro/prod/bin/../../lib/locale/%L/LC_MESSAGES/%N.cat
### command line files and options (expanded):
### hello.c
/opt/SUNWspro/prod/bin/acomp -xldscope=global -i hello.c -y-fbe -y/opt/SUNWspro/prod/bin/fbe -y-xarch=generic \
-y-xmemalign=8i -y-o -yhello.o -y-verbose -y-xthreadvar=no%dynamic -y-comdat -xdbggen=no%stabs+dwarf2+usedonly \
-xdbggen=incl -y-s -m32 -fparam_ir -Qy -D__SunOS_5_10 -D__SUNPRO_C=0x590 -D__SVR4 -D__sun -D__SunOS -D__unix \
-D__sparc -D__BUILTIN_VA_ARG_INCR -D__C99FEATURES__ -Xa -D__PRAGMA_REDEFINE_EXTNAME -Dunix -Dsun \
-Dsparc -D__RESTRICT -xc99=%all,no%lib -D__FLT_EVAL_METHOD__=0 -I/opt/SUNWspro/prod/include/cc \
"-g/opt/SUNWspro/prod/bin/cc -c " -fsimple=0 -D__SUN_PREFETCH -destination_ir=yabe
### Note: LD_LIBRARY_PATH = <null>
### Note: LD_RUN_PATH = <null>
/usr/ccs/bin/ld /opt/SUNWspro/prod/lib/crti.o /opt/SUNWspro/prod/lib/crt1.o /opt/SUNWspro/prod/lib/misalign.o \
/opt/SUNWspro/prod/lib/values-xa.o hello.o -Y "P,/opt/SUNWspro/prod/lib/sparc:/opt/SUNWspro/prod/lib:/usr/ccs/lib:/lib:/usr/lib" \
-Qy -lc /opt/SUNWspro/prod/lib/crtn.oThe basic runtime support library is /lib/libc.so.1, on any version of Solaris, used by every compiler version. You can check the patch version of the library by running
showrev -p | grep <patch>
where <patch> is the patch number for the library. The patch number depends on the Solaris version. You can get more information at [http://sunsolve.sun.com].
There is no manual specifically for the C library. There is a Solaris man page for each function in the library, and you can check the C Users Guide and the Solaris Linker and Libraries Guide for additional information. -
How to find out which "purchased items" are not authorized?
I have an iPhone 5, and my son has an iPod touch that are both synced to iTunes on my MacBook Pro. Since I upgraded the MBP to Yosemite, I can no longer sync the apps on the iPod; it always responds with "The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod".
The iPod contains apps that are purchased with my Apple ID, and apps purchased with my son's own Apple ID. I have deauthorized all computers from both accounts, and authorized iTunes again for both accounts; however, trying to sync the iPod continues to generate this error message.
Is there any way to find out out which specific app(s) are generating this conflict? If I knew which of the (more than 300 in total) apps cause this conflict, I could probably remove/reinstall/do something about them; but as it stands, the error message doesn't help me at all.I have an iPhone 5, and my son has an iPod touch that are both synced to iTunes on my MacBook Pro. Since I upgraded the MBP to Yosemite, I can no longer sync the apps on the iPod; it always responds with "The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod".
The iPod contains apps that are purchased with my Apple ID, and apps purchased with my son's own Apple ID. I have deauthorized all computers from both accounts, and authorized iTunes again for both accounts; however, trying to sync the iPod continues to generate this error message.
Is there any way to find out out which specific app(s) are generating this conflict? If I knew which of the (more than 300 in total) apps cause this conflict, I could probably remove/reinstall/do something about them; but as it stands, the error message doesn't help me at all. -
How to find out which site and list is using InfoPath form
Hi,
We have a site collection with 100+ sites. We are doing analysis of these sites for SP-2013 upgrade, I would like to know which site lists are using a InfoPath form, how do I find out this without manually going through all the
sites & lists.
Thanks,
PatHi
You can Use sharepoint Manager to do so.or use below link
http://blogs.msdn.com/b/david/archive/2011/08/25/powershell-script-to-locate-content-type-useage.aspx
http://aarebrot.net/blog/2011/02/using-powershell-to-retrieve-content-types-and-associated-fields/
As info path form deploy as content type you can find usage of content type
Regards, Rajendra Singh
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful http://sharepointundefind.wordpress.com/ -
How to find out which context attributes are mapped to view elements
Hi All,
We have a custom WD application ( on ECC 6.0 - SAP Basis 70 ) where we have a context node whose 70 attributes are displayed over 2 seperate views.
When a user enters the view, we want to inform him which data was changed.
I have written a general method which takes the context node, grabs its attributes and compares values ... messages are generated via the message manager and context element/attributes are linked so that the input elements become red.
Everything works fine but the only problem is that I do not know which attributes are visible on which view so the user is getting the changes of view 2 on view 1 and vice versa ( if the context is only mapped on 1 view then there is no issue ofcourse ).
The call is currenlty executed at the views inbound plug ... I also checked the view methods themselves like modify view but nothing seems to lead me to a potential solution ...
I have looked through almost all API classes available but I cannot find any way to obtain information about the linking of view elements with context elements/attributes during runtime ... And I don't want to 'hardcode' a list of context attributes per view ....
Has anyone done something similar ?
Thanks,
StevenHi All,
We have a custom WD application ( on ECC 6.0 - SAP Basis 70 ) where we have a context node whose 70 attributes are displayed over 2 seperate views.
When a user enters the view, we want to inform him which data was changed.
I have written a general method which takes the context node, grabs its attributes and compares values ... messages are generated via the message manager and context element/attributes are linked so that the input elements become red.
Everything works fine but the only problem is that I do not know which attributes are visible on which view so the user is getting the changes of view 2 on view 1 and vice versa ( if the context is only mapped on 1 view then there is no issue ofcourse ).
The call is currenlty executed at the views inbound plug ... I also checked the view methods themselves like modify view but nothing seems to lead me to a potential solution ...
I have looked through almost all API classes available but I cannot find any way to obtain information about the linking of view elements with context elements/attributes during runtime ... And I don't want to 'hardcode' a list of context attributes per view ....
Has anyone done something similar ?
Thanks,
Steven -
How to find out which objects are at the end of the datafiles
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.>
My Scenario is having a tablespace of 65G but the data is 5G and that is at the end of datafile for that we are not able to resize the datafile our though is to find out what are the objects at that end of datafiles and will either alter move <owner.tablename> move or alter index <owner.index> rebuld online.
For that how to find out which objects are at the end of the datafiles.
>
You may want to copy this and add it to your toolkit
See 'What's at the End of the File?' in this Tom Kyte article from the Sept 2004 Oracle Magazine
http://www.oracle.com/technetwork/issue-archive/o54asktom-086284.html
And this AskTom blog shows you how to generate a script containing ALTER statements toresize your datafiles to the smallest possible. You can 'pick and choose' from the ALTER statements to do what you want.
Then of course, you can use techniques from this article by Oracle ACE, and noted author, Jonathan Lewis
http://jonathanlewis.wordpress.com/2010/02/06/shrink-tablespace/ -
Hi there,
How to find out which users are using SharePoint Designer to make changes in SharePoint 2010 site?
Thanks.You need to enable auditing on SharePoint server and it will let you know, if someone makes any critical changes for the same.
Please walk through this informative KB to enable auditing on SharePoint :https://support.office.com/en-za/article/Configure-audit-settings-for-a-site-collection-f5a346d0-ee0f-4412-a5e6-d9b5abaa1012
Here is one more resource :
https://support.office.com/en-in/article/View-audit-log-reports-4293e8d5-4e7d-4201-b8ac-c8e63a100131
Moreover, if you wish to audit such critical changes automatically, you may consider on this comprehensive application (http://www.sharepointauditing.com/) that helps to track every changes on SharePoint into
real time and provides the captured data at granular level. -
Hi there,
How to find out which lists are email enabled in my SP 2010?
Any script? Anything else?
Thank you.Hi frob,
check this script that is stated on this link
$SPwebApp = Get-SPWebApplication "http://migration.Company.com"
<# If it is MOSS 2007, You can use:
$SPWebApp = [Microsoft.SharePoint.Administration.SPWebApplication]::Lookup(http://sharepoint.com)
To get SPWebApplication Object
#>
#create a CSV file
"E-Mail,List,Site" > "EMail-Enabled.txt" #Write the Headers in to a text file
foreach ($SPsite in $SPwebApp.Sites) # get the collection of site collections
foreach($SPweb in $SPsite.AllWebs) # get the collection of sub sites
foreach ($SPList list in $SPweb.Lists)
if ( ($splist.CanReceiveEmail) -and ($SPlist.EmailAlias) )
# WRITE-HOST "E-Mail -" $SPList.EmailAlias "is configured for the list "$SPlist.Title "in "$SPweb.Url
$SPList.EmailAlias + "," + $SPlist.Title +"," + $SPweb.Url >> EMail-Enabled.txt #append the data
http://www.sharepointdiary.com/2011/06/find-all-incoming-email-enabled-lists.html
Kind Regards, John Naguib Technical Consultant/Architect MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation. Please remember to mark the reply as answer if it helps. -
How To Find out Which Adapters Are Installed
Hi Experts,
We Installed SAP PI 7.0 Just Now .
How To Find out Which Adapters are Installed ????
Please Help me in this....
Regards
Khanna<i>And the Other thing is Some Adapters Are in the Green Color And Some Are in the Grey Color. Is there Any Difference Between these ??????</i>
CCMS status:
Green: Working
Grey: <i>Status Unknown</i>
Red: Problem with the component
ref:
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/f12541c3d3f323e10000000a155106/content.htm
Regards
krishna
Message was edited by:
Krishnamoorthy Ramakrishnan
Maybe you are looking for
-
Hi! months ago I sent a photo to my friend with Skype by my mobile. Does anyone know how to recover in skype that file sent? Thanks to all who help me. Mario
-
Pricing condition in sales order-issue
Experts, i am facing a very strange issue, functional consultant did some configuration ,such that when header of sales order have condition type ,let say some 'ZXX', this pricing conditon should be applicable to all the schedule line with pricing co
-
Balance sheet account postings to Internal order
Hi All, I have a situation in which I have to make a prepaid expense from a BS account but want to assign it to an internal order so that when this expense actually occur, I can use this internal order report for all the prepayment made against that
-
Netra 440 - pci@1e failure msg at OpenBoot Diagnostics
Hi, We have here some problems at a new netra 440. In the OpenBoot Diagnostics we receive the msg: WARNING: Device /pci@1e,600000/ide@d being marked with 'status' == fail SC Alert: /pci@1e,600000/ide@d fail When the OpenBoot Diagnostics are finished
-
Opening a browser window with Java
Is there a way I can open a Browser Window (with a specific html document) from Java? Thanks.