How to find Tables Associated with User Exit

Hi All,
I have an User Exit userexit_availabilty_out in RV03Vfzz.
How do i know the tables and feilds associated with taht exist.
In case of a Function exit i can find out from import Parameters, but how can i find in this case.
Pl Do reply.
Cheers,
Manohar

You need to find out which SAP program uses this as include. You can do that by doing WhereUsed on Abap include RV03VFZZ in transaction SE38.
After you found out the main program, use transaction SE80 and display that program. Then click on Fields object and you will see all global variables that are accessible in your user exit.

Similar Messages

How to find out the 'z' user exit used in a Particular Transaction

Hi,
I have requirement to analyse all the user exits used in a transaction say 'VA01' . How can i find the user exits in a VA01 transaction. Can anyone suggest how to find the User exits
Thanks in Anticipation.
With Best Regards
mamatha

you can execute the following program , give the transaction name and execute
*& Report YCHATEST                                                    *
REPORT z_find_userexit NO STANDARD PAGE HEADING.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
*& Selection Screen Parameters
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
*& Start of main program
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.

How to find the list of USER-EXITS or BADI for the transaction ABSO

Hi all,
Please help me to find the list of USER-EXITS or BADI for the transaction ABSO & find the exact user-exit which meets the requirement.
Thanks & Regards,
gyanaraj

Hi,
Copy the problem in SE38 and Execute it
Enter the Tcode u want
this will the list of Userexits and badis
TABLES: TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA: JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA: FIELD1(30).
DATA: V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS: P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA: WA_TADIR TYPE TADIR.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
ENDCASE.

How to find which are the user exits that updating z table.

There was a question posted by someone else which said:
I have a z table. my requirement is to find the user exits that update the value to this table?
but my requirement is to get only those user exits that update my z table.
Before that question was rejected, it got 5 replies which made me think that this tip is worth sharing.
So the steps are:
Do a where-used list search from SE11
Click on Search Range button at bottom
Type UPDATE (you can also add Insert, Delete etc to select-option) to ABAP Key Words field
Say No to the popup that asks whether to include Fields of the Table
Result will show relevant programs with code snippets doing static Update on that custom table.

EWK1 would be too performance heavy in this case. It scans the source code to get the result.
You can however, download the list of programs given in where-used list, and give that as limiting condition in EWK1 or some other code scanning utility.
Using my method, where-used list of table is taken from database tables, and then code scanning is done only on the that list, not on entire Z* programs.
Try it yourself to notice the speed difference.

Online college, open document, how to find URL associated with document

I am currently enrolled in an online college. For APA formatting, we are supposed to find the URL associated with an online document. For example: on the college website I click on a link that takes me to the open/save box. I open the file, at the top of the page is the name: sn_2010_writing_scholarly_voice-1. On a PC we are supposed to cut/paste that into our web browser to come up with the URL. I'm not seeing how to do this on a MAC.

Here's a code snipet with null checks removed:
UID MyClassName::GetFrameForXMLElement(IIDXMLElement* inXMLElement)
 InterfacePtr< ITextModel > textModel( Utils< IXMLUtils >()->QueryTextModel( inXMLElement ) );
 InterfacePtr< IFrameList > frameList( textModel->QueryFrameList() );
 UID aFrameUID = frameList->GetNthFrameUID( 0 );
 return aFrameUID;

How to find String associated with some long value.

My requirement is to know the String associated with the long value, for ex 23423423 is having some value like 'skljflsjf'. Can any body findout soln for the same.
Thanks
~ Chethangowda.

My requirement is to know the String associatedwith
the long value, for ex 23423423 is having somevalue
like 'skljflsjf'. Can any body findout soln forthe
same.
Hum... I'm not 100% sure, but it seems the answeris:
dgjldkgjfkljg
Please, don't thank me before you confirm thething.
Regards.Oooohhhh! That explains it! I guess I must've missed
the part where he said he wants it translated to
trollish. How stupid of me.You're absolutely not to blame... to be honest, if I had not read the OP 3-4 times carefully, I would not have found the solution.

How to do this issue with user-exit or badi

in migo transaction, after entering some purchase order number. go for item details.
In that in quantity tab, Qty in unit of entry field value should be empty when the purchase order number is entered. how to do this?
plz let me know as soon as possible.
it is urgent requiement .
points will be awarded.
thanking u in advance,
A.srinivas.

Hi Arthur,
Try this code ( i had changed only one line of code in your original code)
Set oGoodIssue = oCompanyDI.GetBusinessObject(oInventoryGenExit)
oGoodIssue.DocDate = "12/14/2007"
oGoodIssue.Lines.itemCode = "SR-5155"
oGoodIssue.Lines.WarehouseCode = "R5155KGS"
oGoodIssue.Lines.SerialNumbers.Add
oGoodIssue.Lines.SerialNumbers.SystemSerialNumber = CStr(1)
oGoodIssue.Lines.SerialNumbers.ManufacturerSerialNumber = "SR-0000001"
oGoodIssue.Lines.SerialNumbers.InternalSerialNumber = "SR-0000001"
oGoodIssue.Lines.SerialNumbers.SetCurrentLine 0
retval = oGoodIssue.Add
If retval 0 Then
oCompanyDI.GetLastError errMsg, errMsg2
sbo_application.messageBox errMsg & " (" & errMsg & ")"
Else
sbo_application.messageBox "Success"
End If
Hope it helps you
Regards
Vishnu

How to find out all the tables associated with particular T-code or Program

Hi All,
In 4.6B we have a transaction code SE49, where we can see all the tables associated with particular Transaction code or Program.
But in ECC 5.0 or in ECC 6.0 this transaction code is not available.So is there any alternative where i can find out all the tables associated with particular T-code or Program.
Thanks
Shubham

Hi,
you are right, Transaction SE49 as well as SE48 do not exist anymore I'm afraid, they
are discontinued.
You might try to create a transaction variant:
1) Start SE93 to create a transaction variant
2) Specify a name, eg. ZSE49, and choose the first option:
   "program and screen (dialog transaction)
3) Here specify SAPMSEUZ as program, and 200 as screen number
4) Choose a suitable development class (package) if you want it to be
   transportable or Local (=$TMP) if non-transportable
5) press Save
Same applies for SE48, same program but dynpro 100.
Sorry for not being able the reasons behind the decision to discontinue
these transactions. I suppose at least part of the functionality was
integrated in SE38.
Best regards
Erika

How can we find the list of user exits for a transaction

hi all
iam new in user exits please send the basic details
how can we find the list of user exit for a perticular transaction and how can we determine that a particulr user exit is used for a field
regards
jagadish

hi,
check the below links for userexits
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
FAQ's
http://http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
http://www.easymarketplace.de/userexit.php
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
1. what is the defference between enhancement and user-exits?
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Re: difference between user exits & customer exits
Some Questions ! Plz help...
http://searchsap.techtarget.com/expert/KnowledgebaseAnswer/0,289625,sid21_gci1190924_tax299358,00.html?bucket=ETA
2. Difference between CMOD and SMOD?
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://www.sap-img.com/abap.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236095
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/diff-between-cmod-and-smod-236107
check these links..
http://www.sapgenie.com/abap/tips_and_tricks.htm
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
passing selet-option variable to subrouine...
Finding the user-exits of a SAP transaction code
Finding the user-exits of a SAP transaction code
Enter the transaction code in which you are looking for the user-exit
and it will list you the list of user-exits in the transaction code.
Also a drill down is possible which will help you to branch to SMOD.
Written by : SAP Basis, ABAP Programming and Other IMG Stuff
             http://www.sap-img.com/*
report zuserexit no standard page heading.
tables : tstc, tadir, modsapt, modact, trdir, tfdir, enlfdir.
         tables : tstct.
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
parameters : p_tcode like tstc-tcode obligatory.
select single * from tstc where tcode eq p_tcode.
if sy-subrc eq 0.
   select single * from tadir where pgmid = 'R3TR'
                    and object = 'PROG'
                    and obj_name = tstc-pgmna.
   move : tadir-devclass to v_devclass.
      if sy-subrc ne 0.
         select single * from trdir where name = tstc-pgmna.
         if trdir-subc eq 'F'.
            select single * from tfdir where pname = tstc-pgmna.
            select single * from enlfdir where funcname =
            tfdir-funcname.
            select single * from tadir where pgmid = 'R3TR'
                               and object = 'FUGR'
                               and obj_name eq enlfdir-area.
            move : tadir-devclass to v_devclass.
          endif.
       endif.
       select * from tadir into table jtab
                     where pgmid = 'R3TR'
                       and object = 'SMOD'
                       and devclass = v_devclass.
        select single * from tstct where sprsl eq sy-langu and
                                         tcode eq p_tcode.
        format color col_positive intensified off.
        write:/(19) 'Transaction Code - ',
             20(20) p_tcode,
             45(50) tstct-ttext.
                    skip.
        if not jtab[] is initial.
           write:/(95) sy-uline.
           format color col_heading intensified on.
           write:/1 sy-vline,
                  2 'Exit Name',
                 21 sy-vline ,
                 22 'Description',
                 95 sy-vline.
           write:/(95) sy-uline.
           loop at jtab.
              select single * from modsapt
                     where sprsl = sy-langu and
                            name = jtab-obj_name.
                   format color col_normal intensified off.
                   write:/1 sy-vline,
                          2 jtab-obj_name hotspot on,
                         21 sy-vline ,
                         22 modsapt-modtext,
                         95 sy-vline.
           endloop.
           write:/(95) sy-uline.
           describe table jtab.
           skip.
           format color col_total intensified on.
           write:/ 'No of Exits:' , sy-tfill.
        else.
           format color col_negative intensified on.
           write:/(95) 'No User Exit exists'.
        endif.
      else.
          format color col_negative intensified on.
          write:/(95) 'Transaction Code Does Not Exist'.
      endif.
at line-selection.
   get cursor field field1.
   check field1(4) eq 'JTAB'.
   set parameter id 'MON' field sy-lisel+1(10).
   call transaction 'SMOD' and skip first   screen.
*---End of Program
if u want to find the function exit
then check the below code
REPORT ZV_FIND_EXIT NO STANDARD PAGE HEADING.
TABLES : TSTC, TADIR, MODSAPT, MODACT, TRDIR, TFDIR, ENLFDIR.
TABLES : TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE OBLIGATORY.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR WHERE FUNCNAME =
TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT = 'SMOD'
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT WHERE SPRSL EQ SY-LANGU AND
TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(95) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Exit Name',
21 SY-VLINE ,
22 'Description',
95 SY-VLINE.
WRITE:/(95) SY-ULINE.
LOOP AT JTAB.
SELECT SINGLE * FROM MODSAPT
WHERE SPRSL = SY-LANGU AND
NAME = JTAB-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 SY-VLINE,
2 JTAB-OBJ_NAME HOTSPOT ON,
21 SY-VLINE ,
22 MODSAPT-MODTEXT,
95 SY-VLINE.
ENDLOOP.
WRITE:/(95) SY-ULINE.
DESCRIBE TABLE JTAB.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , SY-TFILL.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
AT LINE-SELECTION.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
or
1. in se11, goto table MODSAP
View table contents
2. in Type field, enter 'E' (for function exit)
3. For that tcode, u should know the program name.
eg. SAPLLMOB
4. then type SAPLLMOB and execute
or
REPORT z34331_user_exit .
TABLES : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
Validate Transaction Code
SELECT SINGLE * FROM tstc
WHERE tcode EQ p_tcode.
Find Repository Objects for transaction code
IF sy-subrc EQ 0.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'PROG'
AND obj_name = tstc-pgmna.
MOVE : tadir-devclass TO v_devclass.
IF sy-subrc NE 0.
SELECT SINGLE * FROM trdir
WHERE name = tstc-pgmna.
IF trdir-subc EQ 'F'.
SELECT SINGLE * FROM tfdir
WHERE pname = tstc-pgmna.
SELECT SINGLE * FROM enlfdir
WHERE funcname = tfdir-funcname.
SELECT SINGLE * FROM tadir
WHERE pgmid = 'R3TR'
AND object = 'FUGR'
AND obj_name = enlfdir-area.
MOVE : tadir-devclass TO v_devclass.
ENDIF.
ENDIF.
Find SAP Modifactions
SELECT * FROM tadir
INTO TABLE jtab
WHERE pgmid = 'R3TR'
AND object = 'SMOD'
AND devclass = v_devclass.
SELECT SINGLE * FROM tstct
WHERE sprsl EQ sy-langu
AND tcode EQ p_tcode.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
SKIP.
IF NOT jtab[] IS INITIAL.
WRITE:/(95) sy-uline.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
WRITE:/(95) sy-uline.
LOOP AT jtab.
SELECT SINGLE * FROM modsapt
WHERE sprsl = sy-langu AND
name = jtab-obj_name.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
WRITE:/1 sy-vline,
2 jtab-obj_name HOTSPOT ON,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
ENDLOOP.
WRITE:/(95) sy-uline.
DESCRIBE TABLE jtab.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No of Exits:' , sy-tfill.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'No User Exit exists'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
Regards,
Naveen

How can we find all the available user-exits in sap without using SMOD?.

How can we find all the available user-exits in sap without using SMOD?.

Hi,
Please check this links for user exits list.
http://www.planetsap.com/Userexit_List.htm
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/ab038.htm
Regards,
Ferry Lianto

How to find index name with primarykey and column on a table?

Hi,
how to find index name with primarykey and column on a table?
please help me.
Thankyou.

1 select ac.table_name, ac.index_name, aic.column_name
2 from user_constraints ac, user_ind_columns aic
3 where ac.constraint_type = 'P'
4   and ac.index_name = aic.index_name
5* order by 1,2,3
SQL> /
TABLE_NAME                 INDEX_NAME                COLUMN_NAME
ACTION_TABLE                 SYS_C0011033                NESTED_TABLE_ID
ACTION_TABLE                 SYS_C0011033                SYS_NC_ARRAY_INDEX$
CATEGORIES_TAB                 SYS_C0011038                CATEGORY_ID
CUSTOMERS                 CUSTOMERS_PK                CUSTOMER_ID
INVENTORIES                 INVENTORY_IX                PRODUCT_ID
INVENTORIES                 INVENTORY_IX                WAREHOUSE_ID
LINEITEM_TABLE                 SYS_C0011034                NESTED_TABLE_ID
LINEITEM_TABLE                 SYS_C0011034                SYS_NC_ARRAY_INDEX$
ORDERS                      ORDER_PK                 ORDER_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                LINE_ITEM_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                ORDER_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                LANGUAGE_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                PRODUCT_ID
PRODUCT_INFORMATION            PRODUCT_INFORMATION_PK           PRODUCT_ID
PROMOTIONS                 PROMO_ID_PK                PROMO_ID
WAREHOUSES                 WAREHOUSES_PK                WAREHOUSE_ID
16 rows selected.

Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)

Hi all,
i am facing problem finding enhancement when creation of sales order of Valuation price with user exit/BADI/Enhancement Spot (In valuation variant)
For refferenece:
When going to t.code VA03, select one item and go to extras in the menu bar and select costing then you find some amounts calculation i.e valuation price automatically.
So when creation of sales order i am giving material and that material price automatically takes from material master and creating sales order.
My customer requirement is to get the valuation price of the input material from Z-table during the sales order cost estimate.
This Z-table contains the material code, plant , grade of the material.
Ex:
Material         Plant   Grade Price
A                1000    XYZ     25000
A                1000    PQR     35000
A                1000    BCD     45000
Suppose it depends on sales document type and which grade price i have to take.
So first of all i am unable to find enhancement where to change this code to get change the valuation price.
Does anybody have any idea , is there any user exit/BADI/enhancement for this.
So please help me in this issue.
Thanks & Regards,
lokeshgoud

pls allow me to post the questions

How to activate or deactivate a user-exit based a specific condition

hi all,
i want to activate or deactivate(make it trigger) a particular user-exit based in a condition.
can i do that. if yes please tell me how.
can we use COMMIT in user-exits or BADI's.
Thanks & Regards,
Saroja.

Hello Saroja
The solution provided by Rich should be used for testing purposes only in the the reverted sense:
IF ( syst-uname ne '<specific user>' ).
RETURN.
ENDIF.
" Execute user-exit for specific user
However, for serious programming you should use a a better strategy. In principle, user-exits are either ON or OFF and, if they are ON, they are ON for all user which is usually not intended.
The following example shows a (possible) strategy how to execute user-exits based on specific conditions.
The SAP extension CATS0001 contains the component EXIT_SAPLCATS_001 with the following interface:
FUNCTION EXIT_SAPLCATS_001.
*"*"Lokale Schnittstelle:
*" IMPORTING
*" VALUE(SAP_TCATS) LIKE TCATS STRUCTURE TCATS
*" VALUE(SAP_PERNR) LIKE CATSFIELDS-PERNR
*" VALUE(SAP_DATELEFT) LIKE CATSFIELDS-DATELEFT
*" VALUE(SAP_DATERIGHT) LIKE CATSFIELDS-DATERIGHT
*" VALUE(SAP_DATEFROM) LIKE CATSFIELDS-DATEFROM OPTIONAL
*" VALUE(SAP_DATETO) LIKE CATSFIELDS-DATETO OPTIONAL
*" TABLES
*" SAP_ICATSW STRUCTURE CATSW
*" SAP_ICATSW_FIX STRUCTURE CATSW OPTIONAL
INCLUDE ZXCATU01.
ENDFUNCTION.
The include ZXCATU01 contains only the following coding:
CALL FUNCTION 'Z_EXIT_SAPLCATS_001'
 EXPORTING
 sap_tcats = sap_tcats
 sap_pernr = sap_pernr
 sap_dateleft = sap_dateleft
 sap_dateright = sap_dateright
 SAP_DATEFROM = SAP_DATEFROM
 SAP_DATETO = SAP_DATETO
 tables
 sap_icatsw = sap_icatsw
 SAP_ICATSW_FIX = SAP_ICATSW_FIX.
This function module is just a copy of the exit function module in the customer namespace.
Let us assume that your condition at which the user-exit should be executed is that the employee (SAP_PERNR) belongs to a specific controlling area. Thus, we make another copy of the original exit function module and call this fm within the "general" customer-specific exit function module:
FUNCTION z_exit_saplcats_001.
*"*"Local Interface:
*" IMPORTING
*" VALUE(SAP_TCATS) LIKE TCATS STRUCTURE TCATS
*" VALUE(SAP_PERNR) LIKE CATSFIELDS-PERNR
*" VALUE(SAP_DATELEFT) LIKE CATSFIELDS-DATELEFT
*" VALUE(SAP_DATERIGHT) LIKE CATSFIELDS-DATERIGHT
*" VALUE(SAP_DATEFROM) LIKE CATSFIELDS-DATEFROM OPTIONAL
*" VALUE(SAP_DATETO) LIKE CATSFIELDS-DATETO OPTIONAL
*" TABLES
*" SAP_ICATSW STRUCTURE CATSW
*" SAP_ICATSW_FIX STRUCTURE CATSW OPTIONAL
" User-Exit specific for employees (SAP_PERNR)
" belonging to controlling area 1000
CALL FUNCTION 'Z_EXIT_SAPLCATS_001_1000'
 EXPORTING
 sap_tcats = sap_tcats
 sap_pernr = sap_pernr
 sap_dateleft = sap_dateleft
 sap_dateright = sap_dateright
 sap_datefrom = sap_datefrom
 sap_dateto = sap_dateto
 TABLES
 sap_icatsw = sap_icatsw
 sap_icatsw_fix = sap_icatsw_fix.
" User-Exit specific for employees (SAP_PERNR)
" belonging to controlling area 2000
CALL FUNCTION 'Z_EXIT_SAPLCATS_001_2000'
 EXPORTING
 sap_tcats = sap_tcats
 sap_pernr = sap_pernr
 sap_dateleft = sap_dateleft
 sap_dateright = sap_dateright
 sap_datefrom = sap_datefrom
 sap_dateto = sap_dateto
 TABLES
 sap_icatsw = sap_icatsw
 sap_icatsw_fix = sap_icatsw_fix.
ENDFUNCTION.
Finally, within the specific exit function module we define the condition when the exit should be executed:
FUNCTION z_exit_saplcats_001_1000.
*"*"Local Interface:
*" IMPORTING
*" VALUE(SAP_TCATS) LIKE TCATS STRUCTURE TCATS
*" VALUE(SAP_PERNR) LIKE CATSFIELDS-PERNR
*" VALUE(SAP_DATELEFT) LIKE CATSFIELDS-DATELEFT
*" VALUE(SAP_DATERIGHT) LIKE CATSFIELDS-DATERIGHT
*" VALUE(SAP_DATEFROM) LIKE CATSFIELDS-DATEFROM OPTIONAL
*" VALUE(SAP_DATETO) LIKE CATSFIELDS-DATETO OPTIONAL
*" TABLES
*" SAP_ICATSW STRUCTURE CATSW
*" SAP_ICATSW_FIX STRUCTURE CATSW OPTIONAL
IF ( <user BELONGS to CONTROLLING area 1000> ).
 " execute user-exit
ELSE.
 RETURN.
ENDIF.
ENDFUNCTION.
The alternative would be to place the entire coding including the conditions in the include ZXCATU01. However, in this case you can test the user exit only in the context of the transaction in which the user-exit is passed.
Using the strategy I have devised you are able to test the user-exit in general and the specific user-exits independent of the transaction. For example, if you are already working on 6.40 or higher then you could use ABAP Unit Testing for this purpose.
The same logic can be applied for BAdI where we can have only a single active implementation.
Finally, I hope to convince that it makes sense to spend some time into a reasonable strategy for implementing user-exits.
Regards
Uwe

Tables related to User Exits & Enhancements

Hi,
Could you please let me know about the database tables related to enhancements & user exits?
Actually I need to documnet the information about all the enhancements & also find a way to retrieve the related code. Could you please help on this?
Thanks..

u can find all enahnacements using the below code...
*& Report ZUSEREXIT_FIND                                              *
report zuserexit_find no standard page heading.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exits.
*& Tables
tables : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
    where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
    select single * from tadir
       where pgmid    = 'R3TR'
        and object   = 'PROG'
         and obj_name = tstc-pgmna.
    move : tadir-devclass to v_devclass.
    if sy-subrc ne 0.
      select single * from trdir
         where name = tstc-pgmna.
      if trdir-subc eq 'F'.
        select single * from tfdir
          where pname = tstc-pgmna.
        select single * from enlfdir
          where funcname = tfdir-funcname.
        select single * from tadir
          where pgmid    = 'R3TR'
            and object   = 'FUGR'
            and obj_name = enlfdir-area.
        move : tadir-devclass to v_devclass.
      endif.
    endif.
Find SAP Modifactions
    select * from tadir
      into table jtab
      where pgmid    = 'R3TR'
        and object   = 'SMOD'
        and devclass = v_devclass.
    select single * from tstct
      where sprsl eq sy-langu
        and tcode eq p_tcode.
    format color col_positive intensified off.
    write:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    skip.
    if not jtab[] is initial.
      write:/(95) sy-uline.
      format color col_heading intensified on.
      write:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      write:/(95) sy-uline.
      loop at jtab.
        select single * from modsapt
        where sprsl = sy-langu and
        name = jtab-obj_name.
        format color col_normal intensified off.
        write:/1 sy-vline,
        2 jtab-obj_name hotspot on,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      endloop.
      write:/(95) sy-uline.
      describe table jtab.
      skip.
      format color col_total intensified on.
      write:/ 'No of Exits:' , sy-tfill.
    else.
      format color col_negative intensified on.
      write:/(95) 'No User Exit exists'.
    endif.
else.
    format color col_negative intensified on.
    write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.

Example with user exit

hallow
did some one have a exaple (document) how to do user exit?
Regards

Hi
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
1. Customer exits: Implemented as Function Modules within z includes. Anybody can change it and no access key is required.
2. User Exit: Implemented as subroutines within includes (any include except y or z includes). You need access for the specific include and then you can any subroutine (user exit) within that Include.
BADIs are the enhanced version of user exits where the same logic is implemented via classes and object (OOP)
Enchancement point is the latest once introduces with ECC6.0 . Not very sure about that but you can change it without any access key.
Please go through the following link which will help you understand the exits in a much better way:
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec07a25db911d295ae0000e82de14a/content.htm
http://www.sap-img.com/abap/what-is-the-difference-between-smod-and-cmod.htm
http://sap.niraj.tripod.com/id21.html
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.sap-img.com/ab038.htm
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
1. Previously there were only user-exits.
2. Then came the concept of customer-exits.
3. user exits were nothing but subroutines
FORM/PERFORM
called from standard programs.
4. The FORM defintion was placed inside
an empty include file.
5. So It was called EVERYTIME.
and we need to MODIFY/REPAIR the
standard include .
6. Then it came with concept of customer-exit
7. It consists of calling a FUNCTION MODULE,
which is called only if
the user-exit is ACTIVATED (other wise not called)
In this case, the code in put inside
a pre-defined Z include.
8. Functionality of both is same, howerver
we can note the following important differences
a) Customer exit is called only if activated.
(hence, it does not waste resources)
b) in customer exit, REPAIR does not happen
to the standard include.
Exits are basically the hooks whcih SAP has provided to add your own code. There are two types of Exits:
Reward points for useful Answers
Regards
Anji

How to find Tables Associated with User Exit

Similar Messages

Maybe you are looking for