How to find tax lines with their respective items
Hi,
I'm trying to figure out how to attach each distribution lines type of tax to it's item parent. By scanning ap_invoice_distributions_v, couldn't link out tax lines to any item lines.
A details scenario is the following:
- For each invoice, the report shows its associate distributions lines.
- When a line type is TAX, i'm trying to retrieve its associated item.
I went through the API referenced by APXINWKB forms and its "Calculate Tax" processes to follow the background logic. But AP_TAX_CONTROL_PKG and AP_TAX_ENGINE_PKG could not be of a great help.
Logically, a field in ap_invoice_distributions_v should tell for each tax distribution line what its item distribution line is.....
Any advice is greatly appreciated.
Lamine
go to NACE,
then select SHIPPING and select OUTPUT TYPES button from the application tool bar.
then select WABS-GR/GI SLIP from the right side screen and select OUTPUT TYPES FROM THE leftside menu
now you will able to see the print program name & script name and Smartform name(if it exists)
Program RVADWABS
FORM routine ENTRY
Form RV_CONNOTE_SUPPL
these are the details available at my system
Regards
srikanth
Similar Messages
-
How to find HR Line manager of a PERNR present in PA0000
Dear All,
I am new to HR module. Can anyone tell me how to find the line manager of any user Id fetched from PA01005 against the pernr from PA0000 tableThis example find line manager for non-manager.
REPORT ZDYN_SELECTIONS.
DATA: user_pernr type pa0105-pernr,
user_orgid type pa0001-orgeh,
user_manager type pa0105-pernr,
managers type table of OBJEC WITH HEADER LINE.
PARAMETERS: usrid type pa0105-usrid.
end-of-SELECTION.
SELECT SINGLE pernr INTO user_pernr from PA0105
WHERE usrid = usrid
AND begda <= sy-datum
AND endda >= sy-datum .
SELECT SINGLE orgeh INTO user_orgid FROM pa0001
WHERE pernr = user_pernr
AND begda <= sy-datum
AND endda >= sy-datum .
CALL FUNCTION 'HRCM_ORGUNIT_MANAGER_GET'
EXPORTING
PLVAR = '01'
OTYPE = 'O'
OBJID = user_orgid
BEGDA = sy-datum
ENDDA = sy-datum
* PATH_ID = ' '
TABLES
MANAGER_INFO_TABLE = managers
* EXCEPTIONS
* PATH_ERROR = 1
* ROOT_ERROR = 2
* NOTHING_FOUND = 3
* OTHERS = 4
IF SY-SUBRC <> 0.
* Implement suitable error handling here
ENDIF.
LOOP AT managers.
write managers-objid.
ENDLOOP. -
How to find by email with JPA?
How to find by email with JPA? My this but not worked
public WnUser findUser(WnUser email) {
return (WnUser) em.createQuery
("SELECT object(u.email) FROM entities.WnUser u WHERE u.email =:email").setParameter("email", email.getEmail()).getSingleResult();
javax.ejb.EJBException: javax.persistence.NoResultException: No entity found for query
12:23:44,843 ERROR [STDERR] at org.jboss.ejb3.tx.Ejb3TxPolicy.handleExceptionInOurTx(Ejb3TxPolicy.java:63)
12:23:44,843 ERROR [STDERR] at org.jboss.aspects.tx.TxPolicy.invokeInOurTx(TxPolicy.java:83)
12:23:44,843 ERROR [STDERR] at org.jboss.aspects.tx.TxInterceptor$Required.invoke(TxInterceptor.java:191)
12:23:44,843 ERROR [STDERR] at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:101)First off, you are not really doing:
GWAccount->GWAddressBook->GWAddressBookEntrie->
get_EmailAddress,get_DisplayName()
are you?
If you enter the full line, it will read in all
of the entries each time it is called.
You should break each part into an object:
gwAccount
gwBook
gwEntries
I'm not sure what you are doing.
Are you trying to compose an email?
If so, why are you not using Recipients.Resolve()?
Are you trying to get the recipients from an email?
Preston
>>> On Friday, April 16, 2010 at 1:26 AM,
hillp<[email protected]>
wrote:
> as title,
> i can get the display name from the to, cc, bc edit box,
> then i need to get the email address,
> current i use object API to query:
>
GWAccount‑>GWAddressBook‑>GWAddressBookEntrie >get_EmailAddress,get_Di
splayName
> but i find it is really slow when there are many contacts, example
> 10000.
>
> so is there any other effective method to get the email address? -
Replace paragraph with their respective icons
Is there a way to change different paragraph heads with their respective images (which they all differ for each of these paragraphs) at the same time.
Is there a plug-in or script that can automatically do this change?It is around line 1052.
See www.grainge.org for RoboHelp and Authoring tips -
How to find report created with Report Painter?
Hi!
how to find report created with Report Painter?
Here is the information that I have:
Object filename, let's say <b>Y_P01_90000001</b>
Report painter object <b>INV-102</b>
The thing is that Library is unknown, thats why I can not find it via GR22...
Any ideas?
Will reward,
MindaugasCheck in GRR3 under <b>INV</b> node...
-
How to find material recieved with excise duty or without excise duty
HI
how to find material recieved with or without excise duty , and which table these data store . Because we need to develope one new report.
Regards
GaneshHI,
Check the report J1I5 , For the Material received with the Excise Details,
Table "J_1IEXCHDR" will store the Excise invoice header data.
Regards
Mascot. -
How to find sql statement with Unix process pid
Hi
how to find sql statement with Unix process pid
is there any view to find that.
please if so let me know
Thanks in advancethis is how I am doing this:
oracle 7352340 7459066 0 07:47:10 - 0:00 oracleJDERED (DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
oracle 7459066 5386396 2 07:47:10 pts/1 0:01 sqlplus
select sid,serial# from v$session where process='7459066';
SID SERIAL#
2178 6067
select sql_text
from
v$sqlarea a,
v$session b
where a.hash_value = b.sql_hash_value
and b.sid = 2178
; -
How to bring tax Lines in AP Invoices - R12 ?
Hi All,
I have item and tax lines in the inbound file . I need to bring it .
Wrokaround :
I can generate tax line with tax control amont in header level / populating tax classification code in Item Line . But my requirement is to bring tax line as per the inbond file.
Appreciate if you can provide sample code /suggestion.
Thanks,
AryaFirst of all are you setting up your EBTax as rule based engine or you want it to behave as in 11i i.e you are using the STCC(Standard Tax Classification Code) option.
If you are setting it up as a rule based engine the tax engine should be able to determine all the applicable taxes and apply the same. So setting up of tax groups should not be necesary.
For the STCC case not sure...will get back....
Regards -
How to find index name with primarykey and column on a table?
Hi,
how to find index name with primarykey and column on a table?
please help me.
Thankyou.1 select ac.table_name, ac.index_name, aic.column_name
2 from user_constraints ac, user_ind_columns aic
3 where ac.constraint_type = 'P'
4 and ac.index_name = aic.index_name
5* order by 1,2,3
SQL> /
TABLE_NAME INDEX_NAME COLUMN_NAME
ACTION_TABLE SYS_C0011033 NESTED_TABLE_ID
ACTION_TABLE SYS_C0011033 SYS_NC_ARRAY_INDEX$
CATEGORIES_TAB SYS_C0011038 CATEGORY_ID
CUSTOMERS CUSTOMERS_PK CUSTOMER_ID
INVENTORIES INVENTORY_IX PRODUCT_ID
INVENTORIES INVENTORY_IX WAREHOUSE_ID
LINEITEM_TABLE SYS_C0011034 NESTED_TABLE_ID
LINEITEM_TABLE SYS_C0011034 SYS_NC_ARRAY_INDEX$
ORDERS ORDER_PK ORDER_ID
ORDER_ITEMS ORDER_ITEMS_PK LINE_ITEM_ID
ORDER_ITEMS ORDER_ITEMS_PK ORDER_ID
PRODUCT_DESCRIPTIONS PRD_DESC_PK LANGUAGE_ID
PRODUCT_DESCRIPTIONS PRD_DESC_PK PRODUCT_ID
PRODUCT_INFORMATION PRODUCT_INFORMATION_PK PRODUCT_ID
PROMOTIONS PROMO_ID_PK PROMO_ID
WAREHOUSES WAREHOUSES_PK WAREHOUSE_ID
16 rows selected. -
How to find a routine with it's technical name
Hello!
I am wondering how to find a routine with it's technical name (e.g. "ROUT 7QAXE7SDXIVW4BJ2S2UL3HLAS" as shown in the error message in a transport log).
So I would like to find out, where this routine is located (w.g. which characteristic/key figure in which transfer/update rule).
Any ideas welcome. Thanks, ThomasHi Thomas,
You can try the following:
Look up table <b>RSUPDROUT</b>with the GUID of your routine (like 7QAXE7SDXIVW4BJ2S2UL3HLAS)in the ABAP Code ID field selection. This will show you the InfoObject it is created on, and the GUID of the update rules. If you click on the Check Table button, you can find out the data target and InfoSource of the Update Rule.
In table <b>RSAROUTT</b>you can again use the GUID of your routine to check the description assigned to the routine during its creation.
I am not sure if this works for the routines of transfer rules....still checking it and will update if anything turns up.
Hope this helps... -
HT1529 how to find my iphone with the serial number
hi
could you please tell how to find my iphone with the serial number ?Sorry, there is no way to do that.
What To Do If Your iDevice or Computer Is Lost Or Stolen
iPhone, iPod Touch, and iPad
If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Mac Computer
Find My Mac can be used from Find My Phone at iCloud.com and via Find
My Phone on your iDevice.
The following is third-party anti-theft software:
1. STEM 2.1
2. MacPhoneHome 3.5
3. MacTrack 7.5.0
4. VUWER 1.7
5. Sneaky Bastar* 0.2.0
6. Undercover 5.1.1
7. LoJack for Laptops
8. Hidden 2.0 -
How to find IDOC no with reference to one billing document no
Dear all,
Can you please tell :
How to find IDOC no with reference to one billing document no
ThanksHi Pavan,
You are absolutely correct. But what i need to know is sometime , even in the sales order there will be no output type (basically inbound) which can be found as suggested by Sunil - I think that is the most relevant way to find the IDOC no. Hope you will agree with me. Again how to activate by IAN is also guides the idea. Only thing we need to know the exact parameter to be maintained in own data.
Thanks for your one of the valid suggestion.
Regards,
Ranjan -
To group the lines with the same items before TO
Hello,
We use an external tool (linked to SAP WM) to prepare the orders.
When I have a order with two lines with the same item (because a line free of charge) and when I generate the Transfer Orders, I have two lines and we have to go twice to the picking...
Could you give me a solution to group the lines?
Thx in advanceHi
You have various options here depending on whether you have other middleware in place and what skills you have on-site.
How are you transferring the information to your WMS system?? Idocs / BAPI / Files ???
Mark -
When importing XML, how do I remove lines with labels but no content?
I am working on a directory whose content is supplied as an XML file. I've created an automatic layout with static text/labels for contact details (e.g. Phone, Fax).
When I import the file, superfluous lines with the static text and no content are created. I have 'Delete elements, frames and content that do not match imported XML' checked.
Is there a way of avoid creating these? I've tried doing a search and replace to remove these but this causes quite a few other problems.
Any help - much appreciated!Hi Alison,
Did you create the posted XML file by extracting it from a larger file you've been using successfully? I ask because there seem to be a couple of problems with it which make me wonder how you got it to work at all, at least with the provided InDesign file's XML structure:
The immediate child element of the "root" element in the XML document is one called "step2 ". All of the values with which you are concerned are children of that "step2" element, and yet the structure in the InDesign document contains no "step2" element. As a result, when I import, I get nothing at all in my InDesign document's content (though the data are in the XML structure, buried in a newly-created "step2" element.
In both the XML and the InDesign document's XML structure, you have two different elements which are both named the exactly the same - "description" - (actually, in the XML document, there are three of them). When InDesign imports XML, it stops after the first "match" that it finds, so this will not work in any way that I imagine you intend it to. Based on the content of your InDesign document, I would think there ought to be two separate elements in your XML - named something like "step_description" and "category_description".
If, after getting this all straightened out, your question is how to somehow make the text of an empty element (e.g., <description></description>) disappear in the imported result, there are a few possibilities:
Get rid of the text inside the tag markers in your template/base document - for example, instead of having "[step_description]" (where the "[]" represent the tag markers), just make it be "[]". That way, if there is no text value for "step_description", there will be no text left after the import. However, if you put a end-of-paragraph in your template/base file, that will still be there. In most cases, that's not desired, so you might want to put the empty tag ("[]") in the text flow without a carriage return/line break. If you do that, you will need to include the carriage return in the XML data (which admittedly slightly violates the notion of separating presentation from content). Rather than the xml looking like this:
<step_description>This is the text of my step description.</step_description> you would need to make it be this:
<step_description>This is the text of my step description. </step_description>
(having added " " to represent the carriage return (ASCII character 13).
As above, make the tag an empty one, include the carriage return in your InDesign template/base document, and then write (or have written) a script to run after the XML import to deal with such empty tag cases.
Upgrade to InDesign CS3, CS4, or soon, CS5, so you can take advantage of the "XML Rules" feature which was introduced in CS3. XML Rules will essentially allow you to automate the second option - running a script - as the XML import is taking place.
Excuse the long (and probably unclear) post. If I've misunderstood your question, then please excuse it doubly... -
How to deactivate tax code with transport request
Hi expert
We would like to deactivate tax code with transport request instead of manual on production.
Do you know how to?
Thanks in advance.
GreatHi,
You need to do below:-
(1) Deactivate the tax line in test system
(2) Then create a transport request via Export feature in FTXP
(3) Open your target system and then import the transport request via import feature in FTXP.
Then the tax code will get deactivated line in target system also.
Regards,
SDNFICO
Maybe you are looking for
-
We have one BW query which is pulling data from Contract Division info-object. Now this report does not variable selection object so it is pulling data from all values of Contract Division. Values of Contract Division are CNC, CNS, CNE and CNL. Now
-
How to update software without wi-fi? It shows message that first connect to wi-fi then update even if I have 3G net on my phone i5.
-
Unknown Error (1418), iPod 3rd Generation help please!
So I bought a fantastic old school retro iPod 3rd Generation and I love it! It plays fine, syncs music and all, but only through USB 2.0 (and doesn't charge!). It takes iTunes ages to recognize the iPod with Firewire. And I wish it would be quicker!
-
PLANNED AND ACTUAL COST IN A PROCESS ORDER
From where the planned cost of material and activity types in cost itemizationafter creation flow ?From where the actual cost of a material and activity types in cost analysis of process order after confirmation flow?
-
i added a new podcast for today. went to upload and i get a unknown error. not sure what is going on. help.