How to find the no.of rows of bank details existed previously for XK02

Hi all,
In bdc(table control) i am updatibg the data for the t.code xk02.
In xk02 transaction i am adding bank details data.the no.of rows of bank details changing for each vendor.now i want to know how many rows of bank details are existed previously. so that i can continue the bank details from the next row onwards.
pls help with logic
Thanks
Mythily

Hi,
Its difficult to get it done by BDC!
Use LSMW instead, it would take care of it.
Cheers,S
Somnath

Similar Messages

How to find the no of rows updated

Hello,
Is there any way to find the no of rows updated using a anony.. block
example
begin
update test set cost=3244 where dept='IT';
update test set cost=3434 where dept='retail';
end;
is there any way here.

user7351276 wrote:
yes I had tried this but have around 6000 statements like this.Are you looking to get 6000 counts? Then you'd need 6000 calls to SQL%ROWCOUNT.
Of course, I would be extremely suspicious of a process that had 6000 very similar SQL statements. It would almost certainly be preferable to do something like load a mapping table and to issue a single update, i.e.
CREATE TABLE mapping_table (
cost number,
dept varchar2(10)
INSERT INTO mapping_table( cost, dept ) VALUES( 3244, 'IT' );
INSERT INTO mapping_table( cost, dept ) VALUES( 3434, 'retail' );
UPDATE test t
   SET cost = (
    SELECT m.cost
      FROM mapping_table m
     WHERE m.dept = t.dept )
WHERE EXISTS (
    SELECT 1
      FROM mapping_table m
     WHERE m.dept = t.dept );
dbms_output.put_line( 'A total of ' || sql%rowcount || ' rows updated.' );Justin

How to find the column name and table name with a value

Hi All
How to find the column name and table name with "Value".
For Example i have value named "Srikkanth" This value will be stored in one table and in one column i we dont know the table how to find the table name and column name
Any help is highly appricatable
Thanks & Regards
Srikkanth.M

2 solutions by Michaels (the latter is 11g upwards only)...
michaels> var val varchar2(5)
michaels> exec :val := 'as'
PL/SQL procedure successfully completed.
michaels> select distinct substr (:val, 1, 11) "Searchword",
                substr (table_name, 1, 14) "Table",
                substr (t.column_value.getstringval (), 1, 50) "Column/Value"
           from cols,
                table
                   (xmlsequence
                       (dbms_xmlgen.getxmltype ('select ' || column_name
                                                || ' from ' || table_name
                                                || ' where upper('
                                                || column_name
                                                || ') like upper(''%' || :val
                                                || '%'')'
                                               ).extract ('ROWSET/ROW/*')
                   ) t
--        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
       order by "Table"or
SQL> select table_name,
       column_name,
       :search_string search_string,
       result
from cols,
       xmltable(('ora:view("'||table_name||'")/ROW/'||column_name||'[ora:contains(text(),"%'|| :search_string || '%") > 0]')
       columns result varchar2(10) path '.'
where table_name in ('EMP', 'DEPT')
TABLE_NAME           COLUMN_NAME          SEARCH_STRING        RESULT
DEPT                 DNAME                ES                   RESEARCH
DEPT                 DNAME                ES                   SALES
EMP                  ENAME                ES                   JONES
EMP                  ENAME                ES                   JAMES
EMP                  JOB                  ES                   SALESMAN
EMP                  JOB                  ES                   SALESMAN
EMP                  JOB                  ES                   SALESMAN
EMP                  JOB                  ES                   PRESIDENT
EMP                  JOB                  ES                   SALESMAN
9 rows selected.

How to find the right primary key for DSO from Business Content

According to best practice design, it is reccomended to make a DSO where all fields from Business COntent Datasources are transferred.
But, how to find the right primary indeks ?
Any good suggestions ?
For many of the Business Content dataflows there are not DSOs present, so ther e is no tip to get from the dokumentations as gfar as I have found.
best Regards
Ingrid

Hi Ingrid,
Your question will be perfect in case if you are going for a Custom cube.
You will not have any problem when you create a Datasource in R/3 level even if it is been built on a single table or on view.
Only point that you want to know how to design my Key fields in ODS.
This will be purely depends at what level that you want to bring the data.
Egg:-
If you run the data source in RSA3 and check for Each GL if you have 10 liine items and you want all the 10 line items to be transfered to BW.
In this case you need to check what is the unique combination of fields that is making this lineitems to exists as 10.then include all those fields into Your ODS Key Fields.
This way you can have 10 records for that perticular GL in both sides, by which u will make sure that the data is been completely transfered.
If in case if you clude your own Key fields then you will get the correct Total in report for each GL but you can't see all those 10 line items.
For any case you need to figureout how many records that you want to take into BW based on that check the fields that makes it unique and then add them to ODS Keyfields that will solve your requirement.
I think this will clear your doubt.
Best Regards,
VNK.

How to find the standard smartform,sap scripts and theur driver programs

Hi friends,
can any one tell me how to find the standard smartforms and their driver programs and same for scripts also.
bye
sasi

Hi sasidhar,
1. Either standard or Y sapscript layouts,
   we can check their standard programs
   in this manner also.
2. goto se71
   open the layout in DISPLAY mode.
3. FORM------> CHECK -
> TEXTS
4. a small window will come.
    click ok (tick button)
5. Again a new window will come
which will list out all the DRIVER programs,
which use this layout.
regards,
amit m.

How to find the Database OEM link?

How to find the database OEM where oracle server is installed?
for example
http://cccmc67435.ad.company.com:1158/em
How to find the port number and the domain name? Please guide

Please check in emd.properties file located at $ORACLE_HOME/<Hostname_SID>/sysman/config
cat emd.properties|grep REPOSITORY_URL
REPOSITORY_URL=http://Hostname.us.oracle.com:1158/em/
Regards
jagan
Message was edited by:
user570368

HT2452 How to find the serial number of your Apple hardware product

How to find the serial number of your Apple hardware product

This works for any Mac provided that the logic board has not been replaced.
I recently had the logic board replaced in my iMac. After the tech left (on site repair thanks to Applecare), I went to about the Mac and found jibberish numbers. I called Apple and the AASP and found that he had forgotten to register the serial number. So he came back and, with a special tool (as he called it - looked a little like a USB stick) he contacted Apple and then entered my original serial number as I read it to him.
So, I assume they changed the process since I still have the same serial number as before.

HT204266 I forget the answer to the security question, how to find the answer?

Dear all, I forget the answer to the security question, how to find the answer? Thanks

1. See my User Tip for some help: Some Solutions for Resetting
    Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
    a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
    b. Call Apple Support in your country: Customer Service: Contacting Apple for
        support and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions
5. For online assistance use Apple - Support - Express Lane

How to find accurate number of Rows, and size of all the tables of a Schema

HI,
How to find the accurate number of Rows, and size of all the tables of a Schema ????
Thanks.

SELECT t.table_name AS "Table Name",
t.num_rows AS "Rows",
t.avg_row_len AS "Avg Row Len",
Trunc((t.blocks * p.value)/1024) AS "Size KB",
t.last_analyzed AS "Last Analyzed"
FROM dba_tables t,
v$parameter p
WHERE t.owner = Decode(Upper('&1'), 'ALL', t.owner, Upper('&1'))
AND p.name = 'db_block_size'
ORDER by 4 desc nulls last;
## Gather schema stats
begin
dbms_stats.gather_schema_stats(ownname=>'SYSLOG');
end;
## Gather a particular table stats of a schema
begin
DBMS_STATS.gather_table_stats(ownname=>'syslog',tabname=>'logs');
end;
http://www.oradev.com/create_statistics.jsp
Hope this will work.
Regards
Asif Kabir
-- Mark the answer as correct/helpful

How to find the LOCKED ROWS in a table?

Not locked objects, but for a table the locked rows.

Check below links :
http://www.jlcomp.demon.co.uk/faq/locked_rows.html
How to find the locked row.
who are waiting for same record?
HTH
Girish Sharma

How to find the average of table row values it should display in next row in libwindow/CVI

Hi,
How to find the average of table row values it should display in next row in libwindow/CVI
Please let me know the solution.

There isn't a built-in function to perform calculations on thable cells. What you can do is to retrieve thable cells values and calculate the average by yourself.
To retrieve a bunch of cells in a single instruction you can use GetTableCellRangeVals: prerequisite for this function to work correctly is that cells are all included in a Rect structure (shortly, a rectangle) and are all of the same data type. See the help for the function for some explanations and the link to an example of its usage. In Cell range parameter you can pass VAL_TABLE_ROW_RANGE (row) macro to retrieve an entire row. See here for details.
Once you have retrieved cell values in an array, you can pass it to Mean function to calculate the average.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

How to find the number of ODBC connections to Oracle Database

Hi All,
How to find the number of ODBC connections and all connections to the Database in last week. Are there any views to get this information?
Thanks in advance,
Mahi

What Ed said is true that Oracle doesn't note which type of protocol is connecting to the database, however, you can see which program is accessing the database.
For example: if you already know of a user using ODBC, you can verify as:
select username, osuser, terminal, program from v$session where username = 'SCOTT'
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Assuming that you can confirm the progam noted in the above (example) is the one using ODBC, then you can change the query such as:
SQL> select username, osuser, terminal, program from v$session where program = 'w3wp.exe';
USERNAME                 OSUSER          TERMINAL   PROGRAM
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
SCOTT                    IUSR_SRV231     SRV231     w3wp.exe
2 rows selected.Just for kicks, I checked our listener.log file, but there was no reference of odbc in it either.
Hope this helps...

How to increase the number of rows to be displayed in BEx Web Analyzer

hi,
I am viewing reports using BEx Web analyzer option. It is displaying only 24 rows of data at a time. How to increase the number of rows? do i need to any kind of settings?
pls reply.

Hi,
I think the standard template in 2004s is named 0ANALYSIS_PATTERN. You can find it in Web Application Designer, open, and search for the technical name. If you want to change the number of rows or columns, you can find this setting near the bottom of the XHTML view of the template:
<bi:BLOCK_COLUMNS_SIZE value="4" />
<bi:BLOCK_ROWS_SIZE value="17" />
Then just save, and ignore the error messages.
Message was edited by:
vind Reinsberg

How to find the level of each child table in a relational model?

Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
     O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
    /↑\ Fks
   O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
   ↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
               child.constraint_name fk,
               child.table_name child,
               child.r_constraint_name pk,
               father.table_name father
          from all_constraints father, all_constraints child
         where child.r_owner = father.owner
           and child.r_constraint_name = father.constraint_name
           and father.constraint_type in ('P', 'U')
           and child.constraint_type = 'R'
           and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
   and child.table_name = aux.child
   and father.constraint_name = aux.pk
   and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbility

Justin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
    identified by philips';
select granted_role bulk collect
    into cRoles
    from user_role_privs
   where username = user;
for i in cRoles.first .. cRoles.count loop
    execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
                           constraint root1_id_pk primary key(root1_id)
                           enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
   before delete or insert or update on philips.root1
   begin
     null;
   end;
create table philips.root2(root2_id number,
                           constraint root2_id_pk primary key(root2_id)
                           enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
   before delete or insert or update on philips.root2
   begin
     null;
   end;
create table philips.node1(node1_id number,
                           root1_id number,
                           node2_id number,
                           node4_id number,
                           constraint node1_id_pk primary key(node1_id)
                           enable,
                           constraint n1_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n1_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable,
                           constraint n1_n4_id_fk foreign key(node4_id)
                           references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
   before delete or insert or update on philips.node1
   begin
     null;
   end;
create table philips.node2(node2_id number,
                           root1_id number,
                           node3_id number,
                           constraint node2_id_pk primary key(node2_id)
                           enable,
                           constraint n2_r1_id_fk foreign key(root1_id)
                           references philips.root1(root1_id) enable,
                           constraint n2_n3_id_fk foreign key(node3_id)
                           references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
   before delete or insert or update on philips.node2
   begin
     null;
   end;
create table philips.node3(node3_id number,
                           root2_id number,
                           constraint node3_id_pk primary key(node3_id)
                           enable,
                           constraint n3_r2_id_fk foreign key(root2_id)
                           references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
   before delete or insert or update on philips.node3
   begin
     null;
   end;
create table philips.node4(node4_id number,
                           node2_id number,
                           constraint node4_id_pk primary key(node4_id)
                           enable,
                           constraint n4_n2_id_fk foreign key(node2_id)
                           references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
   before delete or insert or update on philips.node4
   begin
     null;
   end;
-- out of the relational model
create table philips.node5(node5_id number,
                           constraint node5_id_pk primary key(node5_id)
                           enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
   before delete or insert or update on philips.node5
   begin
     null;
   end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
    aExportTablesPhilips     utl_file.file_type := null; -- file to write DDL of tables
    aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
    aExportIndexesPhilips    utl_file.file_type := null; -- file to write DDL of indexes
    aExportGrantsPhilips     utl_file.file_type := null; -- file to write DDL of grants
    aExportTriggersPhilips   utl_file.file_type := null; -- file to write DDL of triggers
    sDirectory               varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
    cTables                  udt_tables; -- collection to store table names for the relational depth
begin
    -- omits all referential constraints:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
    -- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
    -- append a SQL terminator (; or /) to each DDL statement:
    dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
    -- create/open files for export DDL:
    aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
    aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
    aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
    aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
    aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
    select d.table_name bulk collect
      into cTables -- collection with the names of tables in the schema philips
      from all_tables t, philips.dictionary d
     where owner = 'PHILIPS'
       and t.table_name = d.table_name;
    -- execution
    sp_seeks_ddl(aExportTablesPhilips,
                 aExportReferencesPhilips,
                 aExportIndexesPhilips,
                 aExportGrantsPhilips,
                 aExportTriggersPhilips,
                 cTables);
    -- closes all files
    utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips     in utl_file.file_type,
                         aExportReferencesPhilips in utl_file.file_type,
                         aExportIndexesPhilips    in utl_file.file_type,
                         aExportGrantsPhilips     in utl_file.file_type,
                         aExportTriggersPhilips   in utl_file.file_type,
                         cTables                  in out nocopy udt_tables) is
    cDDL       clob := null; -- colletion to save DDL
    plIndex    pls_integer := null;
    sTableName varchar(30) := null;
begin
    for i in cTables.first .. cTables.count loop
      plIndex    := i;
      sTableName := cTables(plIndex);
       * Retrieves the DDL and the dependent DDL into cDDL clob       *
      * for the selected table in the collection, and writes to file.*
      begin
        cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTablesPHILIPS, cDDL);
      exception
        when dbms_metadata.object_not_found then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportReferencesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportIndexesPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportGrantsPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
      begin
        cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
        sp_writes_ddl(aExportTriggersPhilips, cDDL);
      exception
        when dbms_metadata.object_not_found2 then
          null;
      end;
    end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
                          cDDL    in out nocopy clob) is
    pLengthDDL pls_integer := length(cDDL);
    plQuotient pls_integer := null;
    plRemainder pls_integer := null;
begin
      * Register variables to control the amount of lines needed   *
     * for each DDL and the remaining characters to the last row. *
    select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
      into plQuotient, plRemainder
      from dual;
      * Join DDL in the export file.                            *
     * ps. 32766 characters + 1 character for each line break. *
    -- if the size of the DDL is greater than or equal to limit the line ...
    if plQuotient >= 1 then
      -- loops for substring (lines of 32766 characters + 1 break character):
      for i in 1 .. plQuotient loop
        utl_file.put_line(aExport, substr(cDDL, 1, 32766));
        -- removes the last line, of clob, recorded in the buffer:
        cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
      end loop;
    end if;
      * If any remains or the number of characters is less than the threshold (quotient = 0), *
     * no need to substring.                                                                 *
    if plRemainder > 0 then
      utl_file.put_line(aExport, cDDL);
    end if;
    -- record DDL buffered in the export file:
    utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font>

How to find the length of the resultset

how to find the length of the resultset

(Doing a select count as somebody suggested is nota
good solution, as the count can change betweenyour
count query and your real query.)And the number of rows can't change between getting
the last one and doing the actual work?I don't think so. Once you've got the ResultSet, I don't think it will change under you, unless you explicitly set it to SCROLL_SENSITIVE.
I could be mistaken though.

How to find the no.of rows of bank details existed previously for XK02

Similar Messages

Maybe you are looking for