How to find the total no of users in a client

Hi Techie's,
How to find the total no. of users in the client ? is it possible ?
i have tried out with the steps by viewing the table USR01,but i can't get the actual solution ?
solutions rewarded!
regards,
S.Rajeshkumar

Hi rajesh,
You can use SU10, then click on "Authorization data" -> put * on user -> execute.. you should get a list of all users in the client with details included...
Also you can list them using USMM and check all licensed users....
Also SUIM -> users by complex selection criteria -> By user id -> put * on user -> execute.
Regards
Juan

Similar Messages

  • How to find the list of all user exits modified by the users

    How to find the list of all user exits using by in R3

    Hi Mohamed
    You use Solution Manager to do the comparison for you.  There are some nice features that will highlight all your customised coding.  Have a look at the SolMan resources on the Support Portal e.g. using SolMan for upgrade comparisons.
    Rgards
    Carl.

  • How to find the maximum no of users logged in Database

    Hi All,
    How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.

    Vijay wrote:
    Hi All,
    How to find the maximum number of users logged in database at particular time? I can find currently logged users or umber of sessions running on Database but I wanted to find at what time maximum number of users or sessions connected to the DB? is that possible? if yes please help me. thanks.
    select * from v$resource_limit;Lists about 20 different resources with current, maximum and limit on usage. Session count is one of them. I don't think there's any (simple, efficient) way to determine the maximum number of different users of sessions, though.
    Regards
    Jonathan Lewis

  • How to find the total no of pages in script

    hi
    how to find the total no of pages in script

    Hi
    ·     &SAPSCRIPT-FORMPAGES&:
    This field contains a number representing the total number of pages of the currently formatted form (any output between START_FORM and END_FORM). The page counter mode (START, INC, HOLD) of the individual pages is ignored. You can use this symbol to formulate information like
    ‘Page x of y’ for your output.
    ·     &SAPSCRIPT-JOBPAGES&:
    This field contains a number representing the total number of pages of all forms contained in the currently formatted print request, in other words, of all forms created using the OPEN_FORM, START_FORM.. ENDFORM, START_FORM.. END_FORM,..., CLOSE_FORM function modules.
    When using the SAPSCRIPT-FORMPAGES or SAPSCRIPT-JOBPAGES symbols, SAPscript leads all output pages of the current form or current print request into main memory to replace the symbol by the appropriate value. For large output jobs, this can mean a very large amount of memory.
    ·     &PAGE&, &NEXTPAGE&
    This symbols are initially converted using the options specified in the form of the page definition.
    Reward all helpfull answers
    Regards
    Pavan

  • How to find the List of expired user Ids

    How to find the List of expired user Ids

    Can you please tell me the question in detail.What do u mean by expired users?
    IN a Client or in a System.

  • How to find the grants given to user for package/procedure?

    Hi all,
    how to find the grants in oracle for what all are the grants a user is having for package and procedure?
    Thanks & Regards,
    M.Murali..

    M. Murali
    Questions like this are asked over and over again on numerous sites on the Internet, including this forum, and answered.
    You are aware this forum has a 'Search Forum' button?
    PLEASE USE IT and STOP asking FAQ and DOC questions!!!!!!!!!!!!!!!!!!!
    Sybrand Bakker
    Senior Oracle DBA
    Experts: those who did read the documentation

  • How to find the total number of pair under particular parent according to pattern 1:2or2:1,1:1 day to day maximum up to 5 pair caping daily

    Dear friends,
    I provide full details here ,my database table structure ,data and stored procedure and my problem ,
    please review it and provide the solution or any idea to solve my problem.
    I am working on a project in which members are added in a tree pattern, and get the payment accordingly.
    below is my table structure ,data and stored procedure
    CREATE TABLE Associate_Income
    ID varchar(30) NOT NULL,
    ParentID varchar(30) NULL,
    IsLeft tinyint NULL,
    IsRight tinyint NULL,
    joingdate datetime NOT NULL
    go
    INSERT Associate_Income
    (ID, ParentID, IsLeft, IsRight, joingdate)
    SELECT 'Ramesh123', NULL, NULL, NULL '2014-01-03 16:31:15.000' UNION ALL
    SELECT 'Sonu', 'Ramesh123', 1, NULL, '2014-01-03 16:45:21.000' UNION ALL
    SELECT 'Pawan kumar', 'Ramesh123', NULL, 1, '2014-01-04 16:50:23.000' UNION ALL
    SELECT 'Ravi123', 'Sonu', 1, NULL, '2014-01-04 17:03:22.000' UNION ALL
    SELECT 'Vineet123', 'Sonu', NULL, 1, '2014-01-04 17:26:01.000' UNION ALL
    SELECT 'dev123', 'Ravi123', 1, NULL, '2014-01-05 19:35:16.000' UNION ALL
    SELECT 'Mukesh123', 'Ravi123', NULL, 1, '2014-01-05 19:40:41.000' UNION ALL
    SELECT 'poonam123', 'Vineet123', 1, NULL, '2014-01-05 19:49:49.000' UNION ALL
    SELECT 'monu', 'Pawan kumar', 1, NULL, '2014-01-05 17:32:58.000' UNION ALL
    SELECT 'Arti123', 'Pawan kumar', NULL, 1, '2014-01-05 19:54:35.000' UNION ALL
    My  database table Associate_Income  structure and data is as follow:
    ID ParentID IsLeft IsRight joingdate
    Ramesh123 NULL NULL NULL 2014-01-03 16:31:15.000
    Sonu Ramesh123 1 NULL 2014-01-03 16:45:21.000
    Pawan kumar Ramesh123 NULL 1 2014-01-04 16:50:23.000
    Ravi123 Sonu 1 NULL 2014-01-04 17:03:22.000
    Vineet123 Sonu NULL 1 2014-01-04 17:26:01.000
    dev123 Ravi123 1 NULL 2014-01-05 19:35:16.000
    Mukesh123 Ravi123 NULL 1 2014-01-05 19:40:41.000
    poonam123 Vineet123 1 NULL 2014-01-05 19:49:49.000
    monu Pawan kumar 1 NULL 2014-01-05 17:32:58.000
    Arti123 Pawan kumar NULL 1 2014-01-05 19:54:35.000
    by using below stored procedure i can count the total number of pairs under particular node in 2:1,1:1 ratio means first pair is completed when two node added to the left side of given parent node and one node added
    right side of given parent node after that all pairs are completed when one node added left side and one node added right side of parent node (1:1 ratio)
    example if i execute my stored procedure as follows it would return following.
    EXEC count_pairs 'Ramesh123'
    3
    so there is 3 pairs as shown in my figure.
    when we execute my stored procedure for ParentID 'sonu' it would return following.
    EXEC count_pairs 'sonu'
    2
    so there is 2 pairs as shown in my figure.
    My problem is to find the query which can return the total number of pair under particular node any given parent  node. day to
    day maximum 5 pairs in a day please any one can suggest us
    CREATE proc [dbo].[count_pairs]
    @ParentID nvarchar(50)
    as
    begin
    Declare @ParentSUM SMALLINT = 0
    Declare @SubLeftID nvarchar(50)
    Declare @SubRightID nvarchar(50)
    SELECT @SubLeftID = CASE WHEN [IsLeft] = 1 THEN [ID] ELSE @SubLeftID END
    ,@SubRightID = CASE WHEN [IsRight] = 1 THEN [ID] ELSE @SubRightID END
    FROM Associate_Income
    WHERE ParentID = @ParentID
    IF @SubLeftID IS NOT NULL AND @SubRightID IS NOT NULL AND EXISTS(SELECT 1 FROM Associate_Income WHERE [IsLeft] = 1 AND ParentID = @SubLeftID)
    BEGIN
    SET @ParentSUM = 1
    ;WITH Associate_Income_CTE AS
    SELECT [ID], [ParentID], [IsLeft], [IsRight], 0 AS [Level]
    FROM Associate_Income
    WHERE [ParentID] = @ParentID
    UNION ALL
    SELECT RecursiveMember.[ID], RecursiveMember.[ParentID], RecursiveMember.[IsLeft], RecursiveMember.[IsRight], Level + 1
    FROM Associate_Income RecursiveMember
    INNER JOIN Associate_Income_CTE AnchorMember
    ON RecursiveMember.[ParentID] = AnchorMember.[ID]
    SELECT @ParentSUM = @ParentSUM + COUNT([ParentID])
    FROM
    SELECT [ParentID]
    ,'IsLeft' AS [Direction]
    ,1 AS [Value]
    FROM Associate_Income
    WHERE [IsLeft] = 1
    AND [ID] <> @ParentID --AND [ID] NOT IN (@SubLeftID, @ParentID)
    AND [ParentID] NOT IN (@ParentID, @SubLeftID)
    UNION ALL
    SELECT [ParentID]
    ,'IsRight' AS [Direction]
    ,1 AS [Value]
    FROM Associate_Income
    WHERE [IsRight] = 1
    AND [ParentID] <> @ParentID
    ) AS Associate_Income
    PIVOT
    MAX([Value]) FOR [Direction] IN ([IsLeft], [IsRight])
    ) PVT
    WHERE [IsLeft] IS NOT NULL AND [IsRight] IS NOT NULL
    END
    SELECT @ParentSUM
    Jitendra Kumar Sr. Software Developer at Ruvixo Technologies 7895253402

    I don't think this is homework, I am not sure how helpful it was by Kalman to merge the two threads. It appears that two different persons posted the questions. It could be though, that it is the same problem and Jitendra has taken over Chandra's
    task.
    However, I was not able to understand the problem nor the figure. And nor the definition of pairs in this context. My assumption is that what Jitendra posted is an abstraction of the actual problem in order to not reveal intellecutal property. Possibly this
    makes the problem more difficult to understand for us outsiders.
    I've come so far that I worked out a table definition and INSERT statements with sample data, as well as a call to the procedure which returns 3 and this appears to map to the figure, but I don't know what it means. Since I don't know what this
    is about, I have not made any attepmts to understand the code, but I would appreciate clarification about the underlying business rules as well as the expected results for various test cases.
    CREATE TABLE Associate_Income(ID varchar(30) NOT NULL,
    ParentID varchar(30) NULL,
    IsLeft tinyint NULL,
    IsRight tinyint NULL,
    joingdate datetime NOT NULL)
    go
    INSERT Associate_Income (ID, ParentID, IsLeft, IsRight, joingdate)
    SELECT 'Ramesh123', NULL, NULL, NULL, '2014-01-03 16:31:15.000' UNION ALL
    SELECT 'Sonu', 'Ramesh123', 1, NULL, '2014-01-03 16:45:21.000' UNION ALL
    SELECT 'Pawan kumar', 'Ramesh123', NULL, 1, '2014-01-04 16:50:23.000' UNION ALL
    SELECT 'Ravi123', 'Sonu', 1, NULL, '2014-01-04 17:03:22.000' UNION ALL
    SELECT 'Vineet123', 'Sonu', NULL, 1, '2014-01-04 17:26:01.000' UNION ALL
    SELECT 'dev123', 'Ravi123', 1, NULL, '2014-01-05 19:35:16.000' UNION ALL
    SELECT 'Mukesh123', 'Ravi123', NULL, 1, '2014-01-05 19:40:41.000' UNION ALL
    SELECT 'poonam123', 'Vineet123', 1, NULL, '2014-01-05 19:49:49.000' UNION ALL
    SELECT 'monu', 'Pawan kumar', 1, NULL, '2014-01-05 17:32:58.000' UNION ALL
    SELECT 'Arti123', 'Pawan kumar', NULL, 1, '2014-01-05 19:54:35.000'
    go
    CREATE proc [dbo].[count_pairs]
    @ParentID nvarchar(50)
    as
    begin
    Declare @ParentSUM SMALLINT = 0
    Declare @SubLeftID nvarchar(50)
    Declare @SubRightID nvarchar(50)
    SELECT @SubLeftID = CASE WHEN [IsLeft] = 1 THEN [ID] ELSE @SubLeftID END
    ,@SubRightID = CASE WHEN [IsRight] = 1 THEN [ID] ELSE @SubRightID END
    FROM Associate_Income
    WHERE ParentID = @ParentID
    IF @SubLeftID IS NOT NULL AND @SubRightID IS NOT NULL AND EXISTS(SELECT 1 FROM Associate_Income WHERE [IsLeft] = 1 AND ParentID = @SubLeftID)
    BEGIN
    SET @ParentSUM = 1
    ;WITH Associate_Income_CTE AS
    SELECT [ID], [ParentID], [IsLeft], [IsRight], 0 AS [Level]
    FROM Associate_Income
    WHERE [ParentID] = @ParentID
    UNION ALL
    SELECT RecursiveMember.[ID], RecursiveMember.[ParentID], RecursiveMember.[IsLeft], RecursiveMember.[IsRight], Level + 1
    FROM Associate_Income RecursiveMember
    INNER JOIN Associate_Income_CTE AnchorMember
    ON RecursiveMember.[ParentID] = AnchorMember.[ID]
    SELECT @ParentSUM = @ParentSUM + COUNT([ParentID])
    FROM
    SELECT [ParentID]
    ,'IsLeft' AS [Direction]
    ,1 AS [Value]
    FROM Associate_Income
    WHERE [IsLeft] = 1
    AND [ID] <> @ParentID --AND [ID] NOT IN (@SubLeftID, @ParentID)
    AND [ParentID] NOT IN (@ParentID, @SubLeftID)
    UNION ALL
    SELECT [ParentID]
    ,'IsRight' AS [Direction]
    ,1 AS [Value]
    FROM Associate_Income
    WHERE [IsRight] = 1
    AND [ParentID] <> @ParentID
    ) AS Associate_Income
    PIVOT
    MAX([Value]) FOR [Direction] IN ([IsLeft], [IsRight])
    ) PVT
    WHERE [IsLeft] IS NOT NULL AND [IsRight] IS NOT NULL
    END
    SELECT @ParentSUM
    END
    go
    EXEC count_pairs 'Ramesh123'
    go
    DROP PROCEDURE count_pairs
    DROP TABLE Associate_Income
    Erland Sommarskog, SQL Server MVP, [email protected]

  • How to find the total length of the string drawed in a rect?

    Hello Everybody,
    I am drawing a string in on one rect using drawInRect method. This drawInRect method gives us a return value as size of the rect. I need length of the string that is did draw in that rect, but didn't find any api to do this.
    Can anyone tell me , how find the length of the string which we did draw in rect?
    Any help regarding this issue , is highly appreciable.
    Thanks,
    Pandit

    Hi Adreas,
    First of all, very thanks for the response.
    Actually , I am looking for other thing. Using drawInRect method I am drawing contentString in self.rect like below.
    //code
    [contentString drawInRect:self.rect withFont:[UIFont fontWithName:@"Verdana" size:14.0] lineBreakMode:UILineBreakModeWordWrap alignment:UITextAlignmentLeft];
    //End
    My contentString is much larger string, so I am not able to draw it in rect(length: 320.0 height: 460.0) completely. My rect is showing only a part of a contentString. So I need to get that part of string which did draw in the rect, so that I can process my contentString to get the remaining string to draw it a next rect.
    The above code statement is returning me the CGSIZE , it is giving the size of the rect but not giving any information of the string which get draw in that rect.Do you have any idea how to do this?
    Any information on this is highly appreciable.
    Thanks,
    Pandit

  • How to find the total size of the database before the Restore.

    Hi Guys,
    I'll do a Restore, but I do not know the environment and need to know what the total size of the database to create a storage area.
    Is there any way to find out the total size of the database(including all datafiles and temp) using only the RMAN catalog before running the Restore.
    I'm using Tivoli TSM with ASM.
    Levi Pereira

    Hi tychos,
    break on report
    compute sum of TOTAL_DB on Report
    select 'DataFiles' NAME, SUM(ROUND(bytes/1024/1024/1024)) TOTAL_DB from rc_datafile
    where db_name = 'ORCL'
    UNION ALL
    select 'TempFiles' NAME, SUM(ROUND(bytes/1024/1024/1024)) TOTAL_DB from rc_tempfile
    where db_name = 'ORCL'This query returned I had 372 Gbytes of data.
    At the end of the Restore Database got the size of 408 Gbytes.
    The total size of all Redo was 3Gbytes that was not being counted anyway there was a difference of 33Gbytes.
    I need to understand the reason for the difference in sizes.
    It makes no sense to me RMAN catalog does not inform the total size of the database (Datafiles, tempfiles, Redo and controlfile) before the Restore since it's information is already somewhere.
    Thanks for your help.
    Levi

  • How to find the Tcodes used by user

    Hi
    Can anybody help me to find out the way to check which t.codes  or programmes one user had run till his last logon.
    Regards
    Manvir

    Hi,
    You can also find in st03n.
    1. Open st03n --> expert mode
    2. Double click on the period(today,week/month) to find the tcodes used by the user in that period.
    3. Now expert dialog mode will be displayed in the left corner. Please select transaction profile
    4. Double click on the same, you will find the all the results in right side dialog. click on find and enter user name.
    5. Now again double click on the user. You can see all the transactions used by user.
    Regards,
    Gowrinadh

  • How to find the total no of Deliveries per sales order?

    Hi,
    I am writing a custom development specification.
    Is there a SAP table/field by which I can know the total number of deliveries created for a single sales order ?
    For example, if a Sales order is created for quantity 10 and we have two delivers ( each of 5) ..is there a field I can get that information from?
    --Sidd

    Thanks for the reply.
    I am not sure if VBFA will work...I would like the program to look into all deliveries for a sales order and make a distinction between the first one & the rest.
    For example, if the sales order has 5 deliveries associated with it.
    I would like to run a specific logic for the first delivery & a different logic for the rest of the deliveries.
    Is there a way to tell the system ...to distinguish between the different deliveries ?
    -Sidd
    Edited by: sbhattacharya99 on Apr 15, 2010 11:50 PM

  • How to find the total value of the Production order

    HI ,
    I am developing one report in which , custumer have a req. to show the total value (in Dollar) of all  open production order as well as the past production order ( not DELEvered & teco ) for  the selected plant . for that i need  BAPI or table name .
    Regards
    Satish

    Hi,
    For production order nos. - AUFK or AFKO
    For production order status - JEST & to know the status eg REL etc, refer TJ02
    For costs - COSS & COEP (Pass order nos. to the field OBJNR as OR followed by 12 digit order number)
    Hope the above helps.
    Regards,
    Vivek

  • How to find out total active employess/users in PeopleSoft system.

    Hi,
    We need to find out how many terminated employees and how many active employees we have in our Peoplesoft system.
    Thanks.

    Hi rajesh,
    You can use SU10, then click on "Authorization data" -> put * on user -> execute.. you should get a list of all users in the client with details included...
    Also you can list them using USMM and check all licensed users....
    Also SUIM -> users by complex selection criteria -> By user id -> put * on user -> execute.
    Regards
    Juan

  • How to find the structure in this user exit

    My requirement is add new field to Delivery due list ALV report(VL10G).For enhance this report i will append one field(LIKP-SDABW) in this structure SHP_VL10_ITEM.This structure is not showing in the include LV50R_VIEWG05
    USEREXIT_PREPARE_LAYOUT_FILL .Where i have to find this structure,and internal tables?
    Please help me.
    Thanks & Regards,
    sairam

    Hi Sairam,
    Goto the program for transaction VL10G.In that u make a seach for the user-exit
    USEREXIT_PREPARE_LAYOUT_FILL.Then write the logic inside tht.U will need an access key for that.
    <b>Reward points if it solves ur query or answer is helpful</b>
    Thanks
    Chinmay

  • How to find out total of number of users accessing Hyperion Planning applications ?

    Hi All,
    Could someone help me with the details of how to find out total number of users who are accessing Hyperion Planning application in Env.?
    This is with regard to licenses so wanted accurate and unique information,
    Thanks
    Amith

    Hello Amith,
    I think you should have a look at the blog of Cameron Lackpour http://camerons-blog-for-essbase-hackers.blogspot.be/
    In the "Shared Services Stupid Trick" blogs, he shows how to find the real access to an application. The side benefit is that it is amusing to read.
    In how far this is OK for the licenses is written on another page. You likely need to use the same method as Oracle does. Ask the Salesperson how to do this. (I am curious what his/her reply is).
    Regards,
    Philip Hulsebosch.

Maybe you are looking for