How to find users and group in sun box

Please adivce How to find users and group in sunsolaris
Thanks in advance

We can get all the group details from /etc/group file .
Similarly user details can be found in /etc/passwd .

Similar Messages

  • How to import user and group at EPM11.1.2?

    I found a similar topic on this at User & Groups Issue
    But sounds like there is big change a tEPM11.1.2, I didn't find CSSImportExport utility at all.
    Could anyone tell me how to import users and groups from flat file at this version?
    Thanks
    Tony

    You can only use LCM from 11.1.2, it is not really that different format from the CSSImportExport utility.
    I find the best way is to set up a few users and provisioning and then use LCM to export, then you get a good feel to the format of the file.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • How to create users and groups using WLST Offline with Weblogic 8.1.4

    How to create users and groups using WLST Offline with Weblogic 8.1.4?
    Any ideas?

    Hi this is how i created a user using WLST Offline?
    cd('/Security/' + domainName)
    # Delete the default user name weblogic
    # incase you want to remove the defualt user weblogic
    delete('weblogic','User')
    # Creating a new user defined
    create(userName, 'User')
    # Setting the password of the user you created.
    cd ('/Security/' + domainName + '/User/' + userName)
    cmo.setPassword(password)
    Regards
    Makenzo

  • How to reset users and groups in Server.app?

    Recently after change settings in the Server.app (like turn off/on open directory, delete/add certificates), I got a strange problem:
    In the users and groups list, it display all local users and groups (looks like system users and groups, about 100 users and groups, but this is a new server)
    I tried reset the server.app by following
    howto reinstall/reinitialize os x server
    http://support.apple.com/kb/HT200271?viewlocale=en_US
    These users and groups still showing there.
    Have you seen this before and how can I completely reset the server.app to factory default so that I can start over the set up?

    In theory, that should restore the users.  You can do some surgery if you are really brave.  But the reinstall generally should be enough. 
    These accounts are in the DSLocal data store.  Basically, this is very similar to the any OS X machine.  Apple keeps a default copy of the Local Database here:
    /System/Library/DirectoryServices/DefaultLocalDB/Default
    Should you need to reset a machine to the default local database, you can remove the current database (/var/db/dslocal/nodes/Default) and then copy the default one to the same location.  I would not go this far unless the reinstall was unsuccessful. 
    To check, you can run this command:
    dscl . list /Users
    That will list all the Users in the local DB.   To get a count, pipe to wc
    dscl . list /Users | wc -l
    On a Server that I just jumped on, I see 79 users and 111 groups (dscl . list /Groups | wc -l)  But this is a system will man SACL groups so I likely have more than the default.
    Hope this continues to help.  Probably more info that you want. 
    Reid
    Apple Consultants Network
    Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
    Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

  • WLS Users and Groups interface questions / observations

    I'm new to WLS, having just installed OBIEE 11g for the first time. There are some oddities in WLS around setting up Users that I'd like to ask about, to see if I'm just missing something, or if the interface really IS this bad. Please feel free to comment in any way, or to correct any statements that are erroneous. Here goes:
    1. The use of Previous and Next buttons instead of a vertical scroll bar for finding users and groups in their respective lists. What if you have several hundred users, and the one you want to modify starts with the letter 'Z'? That means clicking the Next button several dozen times. (Security Realms … myrealm … Users and Groups … Users) Not only is there no scroll bar, there's no search box either. The only way to get to a user near the end of the alphabetical listing is the Next button. Is that correct?
    2. After adding a new user, what's the next most logical thing to want to do? How about assigning that user to Groups? So why do I have to click Next several times to find that new user in the alphabetical list? I don't see a sortable 'Date Modified' field for the table of users, nor a link to the "Most Recently Added" user. Nor can I assign groups during the same action as creating the user. In the example in #1, I might have to click Next several dozen times to get to the user I just added. Is that correct?
    3. When creating a new User, immediately after clicking New, where is the most likely place that I'd want to go? How about the Name field? Right now, the cursor rests in some indeterminate location. I have to hit the Tab key 14 times, or move the mouse into the Name box and click it. The active cursor position does not default to the Name box when creating a new user. Is that correct?
    4. I don't see a 'Create Like' button for creating Users, so that existing group membership can be easily replicated. I'd like to be able to add a new employee by clicking to highlight an existing user from the same department, clicking a 'Create Like' button, then entering a new user name and password, with all group memberships assigned automatically based on the source user. The same could be said for replicating groups. I don't think that exists. Is that correct?
    5. I don't see a clean way to return to the User list on the page on which I clicked a user name. Imagine that I'm going through my entire list of users one at a time to set an attribute. I click on the user JSMITH and set the attribute. The only way to get back to JSMITH's page and select the next user list is to hit the browser's back button three times, or to click the Users and Groups breadcrumb at the top of the screen and use the Next link multiple times to find that page again. Is that correct?
    6. I don't see a way to bring up a Group and assign Users to it from a list. It appears that the only way to assign a User to a Group is to access a User profile and click Groups. If we're creating a new group that has 200 users selected from a list of 500 users, that could potentially represent somewhere between 5000 and 10000 mouse clicks. It would be much more efficient to be able to bring up a group, then select its members from a list of users. That does not appear to be possible. Is that correct?
    7. It also appears that when assigning groups for Users, the list of Available Parent Groups sorts the lowercase entries after all uppercase entries, so that groups that start with the letter 'a' fall after groups that start with 'Z'. That is not the case with the list of users. The User table uses a case-insensitive sort. Is that correct?
    8. When I want to delete more than one User, and the ones that I want to delete are on different pages, there appears to be no way to select those users from multiple pages at the same time. So, imagine that I have 500 users, and I want to delete two users, one of whom is listed on page 48, and the other on page 50. I would have to click the Next button 47 times to find the first user and delete it. At that point, the interface returns to page 1, and I have to click the Next button 49 times to reach the second user. Is that correct?

    Hi,
    Regarding your first question, you might want to press the "Customize this table" button, then select the maximum allowed amount of rows in "Number of rows displayed per page:" that would resolve some of the problems you're having with the interface. I do think this is not a great graphical tool, and there are some usability issues.
    Regarding the adding of users to groups, it seems the way you describe is the only way of doing it, however you could try using a script instead of the graphical console, the easiest way of making it is adding a user to a group while using the "Record" button on the top of the screen to get a wlst script to use as a model, then create a new script with all new users you want to add/modify.
    Regards,
    Franco.

  • How to change default /Users and /Groups to different Volume?

    Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
    We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
    Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
    Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
    How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
    Thanks in advance.

    1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
    2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
    3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
    4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
    5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
    6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

  • How to find user group from tcode

    Hi Experts,
    I have custom tcode from this i found report name as AQIDSYSTQV000001SD_RR_03======
    I am unable to find Queryname in SQ01 from this.
    When i saw some of the forums i  understood that IDSYST is the user group for my query but i am unable to trace such user group in SQ01.
    Please guide me how to find user group for my report
    Thanks&Regards,
    narasimha.

    Hi ,
    I found in table AQGQSTRUC but i didnt find the specified query
    Previously 401 client is there but at present it is not there .How can you justify it that it is 401 client.
    As 401 client data is moved to someother client is it the problem why i am not able to find query??
    Thanks&Regards,
    narasimha.
    Edited by: narasimha02 on Dec 7, 2010 9:54 AM

  • How to create a new user and group on command line?

    Hi,
    I am trying to install INN, the news server on OS X.4.8 (non-server), but it requires me to create a user and group, both called 'news'.
    I know this has something to do with using Netinfo to create them, but I am logged in remotely via ssh and I can't use Netinfo Manager.
    How do I create new users and groups via the command line.
    Thanks for any help.
    PowerMac G5 2x2.7GHz   Mac OS X (10.4.8)  

    I've put some shell scripts that do this here,
    and descriptions
    add_user
    addgroup

  • How to prevent user or group to use 3-tier WebI and DeskI in XI 3.1

    How to prevent user or group to use 3-tier WebI and DeskI in XI 3.1
    This function is enable in BOE 6.5 by using Supervisor.

    Hi,
    You can explicitly deny access to these applications from the CMC in BOE 3.1. Open the CMC, click on BusinessObjects Enterprise Application and then select the WebI.
    From the right hand side click on the 'Net Access' section for that group and disable the 'Log on to Web-Intelligence and view this object in CMC.'
    This will prevent the option of the WebI for that group.
    I hope this helps you.
    Regards,
    Prashant

  • Upgraded to 3.1 and lost all users and groups.  How do we get them back?

    We ran the update to Server 3.1 (from 3.0) on our Mavericks Mac-Mini Server.
    Everything had been fine before the update, but now all users and groups have completely disappeared.
    The only user we have is the main administrator log-in.
    Since we verified that all of our data, wikis, and other items are still in place, it might be easier to just re-create the groups and users (and permission therein).
    But, we cannot log into Workgroup Manager, nor can we add users/groups in the Server app (because it is "grayed-out").
    Can somebody please provide a suggestion??
    We are a small engineering firm with only 5 users, so it's not like this would take all day.
    Thanks, Mike

    Have you tried
    sudo sso_util configure -r REALM_NAME -a diradmin afp
    (cf. Lion Server: AFP users unable to authenticate with Kerberos after upgrading)in Apple Support ?
    p.

  • How do we fetch the top-level users and groups for a particular resource

    Hi Experts,
    I need to fetch the top level users and groups (permissions) for a particular resource, Currently i am able to fetch the effective users list.
    Thanks.

    To elaborate...
    Here we need the users and groups who have direct access to the resource. We dont want to resolve groups.
    Please help us with the apis to use in our java code to fetch the users and groups.

  • How to create windows users and groups from Java

    Hi,
    Can any one please tell me, which Package/API will helps to create windows users and groups from Java.
    Thanks,
    M.Prem.

    You can't do it with pure Java, and it's not in the core API. You'd have to write a native function to do it, using whatever API Windows provides, and then call it with JNI. Or look for a third party native-based Java library that already does that.

  • Can't find user in users and groups

    Set up 2 user accounts.  Both were give administrator privledges.  When I look under users and groups, I do not see the other user.  This happens when I am logged in in both accounts.  Want to see them so I can add shared files.

    Welcome to Apple Communities
    I found this problem with others. Make a backup, press Command and R keys in boot, open Disk Utility, erase the disk and install OS X. You have a Shared folder in Users to do it

  • Mount usb with fstab, users and groups.

    This is my fstab file.
    UUID=5d0339ca-83ab-4ce6-9dff-ed407fc3c5e0 / ext4 rw,relatime,data=ordered 0 1
    # /dev/sda2
    UUID=75552890-f5f6-4472-bef4-37965baf2dac /home ext4 rw,relatime,data=ordered 0 2
    # samsung1tb
    UUID=15957579-4fa5-4726-815c-d9762f584120 /home/spiritech-ext ext4 rw,relatime,data=ordered 0 2
    # corsair8gb
    UUID=75602c63-1935-4ed9-8401-6dd2a7853878 /home/corsair8gb ext4 rw,users,relatime,noauto 0 0
    my problem is when i mount the usb /home/corsair8gb the users and groups become root. is this normal for usb drives. it does not happen when the samsung1tb is mounted, so was wondering how i can mount the corsair8gb without changing the users and groups of the directory i mount it to???
    NOTE: /home/corsair8gb directory user is myusername and group is users when device is not mounted.

    rebootl wrote:
    Have you tried the option user instead of users? It's not exactly the same.
    Edit: To enforce it you can also set the user/group id by uid=<youruserid>,gid=<yourgroupid> .
    Note that these are numbers, to find them e.g. issue "id" in a terminal.
    ok i will try this way. i did try before. didnt realise it was with codes.

  • Huge list of Groups in Users and Groups

    I just upgraded SL to ML. I've been learning and setting things up.
    I use the machine as a standard user and I have a "silent" admin user, too.
    I was wondering if anyone has come across this?  I went into System Preferences and noticed that there was a HUGE list of Groups.  Some had "logical" names like admin server, etc.  The list was super long.  Some of the name were strange, like "umbg"  I have no idea how they got there.  And, searching here, and googling doesn't give me any info.
    I don't know how all these groups got there.  I did not add a single one.
    I did make a mistake, because I deleted them all and then ML made my admin user a standard user and I could not unlock System Preferences, or use my password anywhere.  ugh.
    I tried finding a way to fix it, but I ended up just using Restore from disk utility. no worries, didn't have that much going on, yet.
    Is it normal to have a list of groups that you did not create?  Does ML just create groups in your Users and Groups list??
    How do I take care of it if it happens again?  Can some be deleted?  If so, which ones?  What are they for?
    Thanks for any help with this.

    Okay, I did do the restore.
    And, the groups were not there.
    So, first off, I opened TinkerToolSystem and went through all thes options.  I found one: Show Groups in users and groups.  I made sure it was not checked.  Hopefully, it will not repopulate.
    Then I remembered something.  I did download Onyx.  I was just looking for a way to change something simple.  Mostly, I just looked around, didn't click on buttons, etc.  But, Onyx may have change this setting (or me using Onyx inadvertently).  Whichever, whatever, I've used TinkerToolSystem for years and it's always worked so well.  I think I'm sticking with it and not install Onyx - which I had to go through the Gatekeeper exception deal... so it makes me nervous.
    I'll post back if further issues with this.

Maybe you are looking for