How to find values for fields of PROPERTIES in cl_crm_documents= create_w

Hi everyone ,
I am attaching files from local disk to CRM Opportunity by using method cl_crm_documents=>create_with_file .
I am able to see files in SAP frontend portal , but the problem is some of the fields in properties tab coming blank .
So how to find the NAME and VALUE fields of PROPERTIES structure in create_with_file .
Right now i am passing below fields these ar coming
"-----Filling Properties structure
    ls_prop-name   = 'KW_RELATIVE_URL'.
    ls_prop-value = wa_path-ls_name.
    APPEND ls_prop TO lt_prop.
    ls_prop-name   = 'DESCRIPTION '.
    ls_prop-value = 'Strategy paper for action plan1' .
    APPEND ls_prop TO lt_prop.
ls_prop-name = 'LANGUAGE'.
    ls_prop-value = sy-langu.
    APPEND ls_prop TO lt_prop.
but fileds like Attachment Type , Document Status , Line of Business , Business Year and Country of LE are not coming
as i frontend is a CRM custom application to mentain opportunity .
at prasent i am passing attribute Names and default values of these fields to properties structure but then also i am unable to see it in front end.
Please help if anybody knows where to find the NAME and VALUE fields for thse parameters.
Regards
Chetan

I used insert statement to populate these fields in table CRMD_KW_DOC_GEN as these are custom fields.
Regards
Chetan

Similar Messages

How to populate values for a new field in target infoprovider

Hi Experts,
am new to BI. i would like to know on how to populate values for a new field in the target cube with start rotuine.In my case, i have a source infoprovider, which has 3 fields and a target infoprovider, which has 5 fields. i need to populate the new 2 fields in start routine. i dont want to populate using Field routine and am using 3.5 version. please assist with code on how to solve this issue.
Thank you,
Chitra.
Edited by: Chitra_BI on Jun 13, 2011 10:23 AM

Debug the standard code and see where the other fields are getting update. you can use the similar approach and area to code for the new field.
Regards,
Lalit Mohan Gupta.

How to assign values for more than one field

Hi,
I have written following code
constants: fieldname(30) value '(SAPMF02D)KNA1-AUFSD'.
constants: fieldname1(30) value '(SAPMF02D)KNA1-LISFD'.
constants: fieldname2(30) value '(SAPMF02D)KNA1-FAKSD'.
field-symbols: <L_FIELD> TYPE ANY.
field-symbols: <L_FIELD1> TYPE ANY.
field-symbols: <L_FIELD2> TYPE ANY.
      Assign (fieldname) to <l_field>.
      <L_FIELD> = 'ZB'. " value according to your requirement
      Assign (fieldname1) to <l_field1>.
      <L_FIELD1> = 'ZB'.
while debugging <l_field1> is not assinging (fieldname1).
Im able to assing for (fieldname).
how to assign value for (fieldname1).
plz suggest me to assign values for more than one field.
Regards,
Brahmaji

Hello,
Because there is no field name called LISFD in KNA1. Actually you misspelled the field name.
It is KNA1-LIFSD

SDIMA: Values for field SUPP_EXIST in condition table CNCCRMPRCUS801 differ

Hi Experts,
when checking condition records consistency between CRM and ERP via transacation SDIMA we get the following error for one of the conditon records: 'Values for field SUPP_EXIST in condition table CNCCRMPRCUS801 differ'. Can anybody explain to me where this message could come from? To my understanding field 'SUPP_EXIST' only exists in CRM condition tables for technical reason. So no way to compare this against an ERP condition table field, is there?
And related to this: I found that this error message is triggered from method CL_CND_DIMA_CRM->COMPARE_MBDOC. As the DIMA-Compare is triggered asynchronously and just setting a break-point is no option therefore, I was wondering if anybody knows a way of debugging this method in order to find out what the coding does in detail before the message is thrown.
Thanks a lot for your help!
Cheers,
Jens

Hi Brian and the other Experts,
thanks for your help. Unfortunately, I don't have a single record with this problem but a lot more. So it is not possible to correct this manually. Also, I would not know how to correct this anyhow as I don't understand what field in R/3 should map to field SUPP_EXIST in CRM condition tables. Let me explain:
From my understanding, in CRM (leave aside scales) we have two database tables for each condition table, a central and a supplemental table. A condition record always creates a data record in the central table and nothing is inserted in the supplemental table in case that the fields form the supplemental table are not needed. However, when there are less common condition features involved (e.g. uppler limits), then an additional data record will be created in the supplemental table with the relevant data. And this is when field SUPP_EXIST comes into play as it is an indicator for the system that a data record exists for that condition record also in the supplemental table.
The condition record data model in R/3 is completely different. For CRM condition table CNCCRMPRCUS801 the following tables in R/3 are involved: A801, KONH and KONP. And there is a data record for each of them for a given condition record. There is no concept of having a supplemental table as far as I understand it so where exactly would I find this SUPP_EXIST in R/3 so that I can make sure it does not deviate from the data in CRM?
Would be great if someone could give me another hint. What am I getting wrong?
Cheers,
Jens

How to find out important fields in table like MARA?

How to find out important fields in a table for example like MARA?
Details: In R/3 or ECC table for example MARA;
1) How to find out what are the important fields?
2)Does the table have only key figures not characteristics right?
3) There are so many tables in FI; Can you please tell me what are the important tables?
4) There is any easy automatic way to figure out that the particular datasource for example 2lis_02_item is pulling data from so and so table. I like to know the process not the results please.
Thanks in advance.
York.

Hi York,
Let me go by points:
1. There is nothing like important fields ... The question could be Key fields ... the fields which identify a record uniquely ... If you go to SE11, and go inot the dispaly of MARA table ... you will see that there is tick mark under key to indicate that the field is a key field ... All the fields which are so marked would identify a record in the table uniquely. If your question is otherwise ... (Important fields) ... then it depends on the purpose you wnat to meet ... Some fields might be important for me but not for you ... so there is not hard nad fast rule for important fields.
2. No... Tables in R/3 or ECC would contain both Key figures and characteristics.
3. Important tables in FI would be BKPF, BSEG and BSET.
4. The procedure for finding out which table are used by say 2lis_02_item would be different from that of other non LO/LIS extractors.
In case of LO/LIS turn on the trace (below process) while populating the setup tables and for thoers while executing RSA3.
1. Open one session and go to ST05, click on "Activate Trace"
2. Open another session and execute the transaction you want to track for the tables it is going to hit.
3. Go to the session of point 1 above and click on DEACTIVATE TRACE
4. Click on DISPLAY Trace
This will show you all the tables that were hit while extracting data. Point to remember here is ... it will hit some standard tables as well ... so you will have to filter out what is relevant from what is not.
Hope this helps.
best regards,
Kazmi

FLEET Table, Possible Values For Field IS SI UNIT

Dear experts,
While doing analysis on fleet data I realized that for field IS_SI_UNIT (PM: Vehicle Data in SI Unit (e.g. Dimensions)) in table FLEET in two separate systems we have vehicle records set with different entries for this field.
In one system vehicles are stored with value F: DB Unit set individually (new)
and in other one with value Y: DB Unit set through (new)
Systems are SAP ECC 6.0
Does anyone know what does it mean and what influence this has? In both systems vehicles are created by end users using standard PM creation transaction and those indicators are set in background while equipment is saved so there is not influence by end user.
I could not find much information on SAP support portal about meaning behind possible values for field IS_SI_UNIT in table FLEET so was wondering if anyone knows more here?
Thanks,
Ivo

Dear,
There will not be any impact.Finally system will consider only SI units for fleet equipment consumption calculation.
Kindly read note:366733 - Equipment/fleet: SI units in table FLEET and 372736 - Equipmt/vehicle:rounding error because of SI units
It may help you.
But in my system i can view only "Y"
Regards,
Pardhu

How to find a crm field in the bi content

Hi all,
in r/3 we have been using rsosfieldmap table to find the infoobject existing in the bi system and can u tell me how to find the crm field whether that particular infoobject is existing or not in the bicontent.
Regards,
Naveen

HI Naveen,
Check for the filed source table -- next find the data source used--> you can search in help.sap.com for the related BI content BW info objects
Rsosfiledmap table is used to find the respective Bw filed to which its mapped. this table can be used only if the fileds are already mapped and exisintg in use in BW system.
i guess u can use the same table to find the Bw info obejct(only if the CRM data source is replicated n used in BW system).
Regards
KP

How to bind values for input parameters from an adf table?

Hi,
The version I am using is
Jdev TP4 11.1.1.0.0
I need to know how to bind values for input parameters to methods.
I have created an af:table and I have a button created using a method which is outside the af:table. This method needs to take input parameter values from the column values in the table.
When I have an adf form instead of the table the binding works.
Any help?
Thanks.

Hi Balaji,
you need to bind you table to a backing bean and call a method in the backing bean when you hit the button. In the method you get the selected row from the table and have access to the columns of it. Then call the the method with the parameters.
To bind the table to a bean select the properties of the table, go to behavior section and look for the advanced section 'Binding' property.
Select the small down arrow at the right side and click edit. In the dialog select or create a bean and property for the table.
Go to the button properties, look for 'Action', again select the small down arrow and click 'Edit'. Select the bean which holds the table property and create a method for the button.
The method look like    public void bearbeitenQuelle(ActionEvent actionEvent)
        // Add event code here...
        RichTable lTable = getYourTable();
        Object lData = lTable.getSelectedRowData();
        FacesCtrlHierNodeBinding lNB = (FacesCtrlHierNodeBinding) lData;
        YourViewRow lRow = (YourViewRow ) lNB.getCurrentRow();
    }Hope the get you started
Timo

How to find Transaction for a Known Table maintenance View

Hello Friends,
May I know how to find transaction for a known table maintenance View.
Thanks,
Best Regards,
Sudhanshu Garg

Goto SE16 Transaction and enter TSTCP Table
Here PARAM = /SM30 VIEWNAME=Table name*;UPDATE=X;
enter table name in bold.
Thanks
Seshu

Error Enter a value for field BP_GUID

I am using MDG 7.0
When I create a Request for "Create ERP Customer",
I then enter data including the sales Area Data and Company Code data
Then Submit
at the following approval step , Sales Area data and CC data is missing.
I get ERROR message "Enter a value for Field BP_GUID"
Please advise what Table or T-code am I missing values for .
Thanks for your assistance,

hi,
See the attached screen shot.
Regards,
Tushar

How to set value for trim and bleed using jsx script?

I have tried using bleedoffsetRect but somehow it is not working. Can anybody please help me on how to set value for trim and bleed using jsx script? Any example will be highly appreciated.
Following is the code I am trying with:
var _saveName = new File ( root_path +_strFileName+".pdf");
    var _saveOpts = new PDFSaveOptions();
    _saveOpts.printerResolution = 300;
    var bleedarray = new Array();
     bleedarray[0] =9.00;
     bleedarray[1]=9.00;
     bleedarray[2]=9.00;
     bleedarray[3]=9.00;
    _saveOpts.bleedOffsetRect = bleedarray;

I would expect although I've not actually tried this for the bleed off set box to be larger than the artbaord and the first two values to be negative or 0…
var bleedarray = new Array(-9,-9,artboard.width+9,artboard.height+9);
Where 'artboard.width' & 'artboard.height' you will have calculated from your file. An Array(9,9,9,9); would not constitute any boxes bounds.

How to find the Databse field used in which Transaction

Hi,
I have one query about:
How to find the particular field from the Database table, used in which transaction?
Bottomline: I want to find the LIKP- LIFEX field, used in which Transaction. I know it is related to inbound delivery, but i couldn't find it in which transaction it is.
Thanks in advance.
Jai.

Hi Jai,
The field is called External ID which equal to LIKP-LIFEX or RV50A-VERUR_LA (structure).
Path:
Goto -> Header -> Administration -> External ID.
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.

Default values for fields in infotype 0017

Is there any way to set default values for fields in infotype 0017? Maybe a
feature? I'm thinking about defaulting values based on pay scale group.
Thanks before.

Hi
You can implement what i suggested in my previous post.
Or else, you can do what we did in one of our client requirement.
We created a custom Ztable where we had defined which value of the the employee grouping to be placed for which record.
We did that on the basis of the company code fields.
For eg: IF BUKRS = 'TR01'
then EE Grp Expense Type = '1'.
ENDIF.
Similarly for other fields.
Hope this helps.
Harsh

How to find the structure fields data in database tables?

how to find the structure fields data in database tables?

Your question doesn't appear to be Web Dynpro ABAP related. Please only post questions in this forum if they are directly Web Dynpro ABAP related. There are several other more general ABAP related forums.

UDF - Set Valid Values for Field

I have a UDF created in Marketing Docs / row level called UOM_Ordered (alphanumeric, length 2) using Set Valid Values for Field. Values are:
CS
IN
DZ
PC
Above are CS abrev for Case, IN abrev for Inner, DZ abrev for Dozen .................
If possible could I have say for example "IN" not to appear in the drop down if the value in OITM (UDF called U_Inner_Qty) is either NULL or a Zero? It's would be a way to stop mistakes when orders are inputted.
Any help on this would be appreciated.
Thks - Scott

Hello
You could try the following:
Insert a formatted search on the field, which contain conditions, ie whether the condition that the value is 0 or null, then bring the required data, while if it is not the case, applies the search formatted with the available data.
On the other hand, leave the form with all the options for disabled users. The latter through additional authorizations for users
I hope it will help
Best regards,

How to find values for fields of PROPERTIES in cl_crm_documents= create_w

Similar Messages

Maybe you are looking for