How to find verion information for owb?

I have an oracke BI database that I need to migrate to a new server and storage platform for perfomance reasons and the server is running owb but I am not sure which version of owb is installed on the server. The database where the owb repository is 10.1.0.3 on suse linux.
I plan to use oracle dataguard to migrate the database to the new hardware but I am also trying to fond out how to move the owb? Can the owb be installed ahead of time on the new server and then pointed back to the original repository once the database has been replicated to the new hardware?
I am not familiar with the install of owb unfortunately and do not know of you can just install it without creating the repository and then point it to an existing repositor at a later time?
Appreciate any help,
Thx.

You can ckeck OWB version in such ways
- run Oracle Universal Installer and look at Oracle home for OWB installation (OUI display release of installed software including applied patches)
- or connect to OWB repository owner and execute SQL SELECT RUNTIME_VERSION FROM WB_RT_SERVICE_NODESAfter that install corresponding OWB release on new server (into different from Oracle database Home).
Then follow steps from Metalink note 434272.1 "How To Update Warehouse Builder 10.2 After A Database Cloning" (there are similar Metalink notes for other OWB releases).
Other helpful forum threads:
Why can't I connect to warehouse builder?
How to clone an OWB Runtime environment?
Regards,
Oleg

Similar Messages

How to find table information for a datasource?

Hi,
Can you please tell me how to find table information for a datasource. I am not getting much help from help.sap.
I am trying to find table information for below datasources. We are creating DSO's for the below mentioned datasources, for some we have standard DSO's(0WBS_O06), for others I am trying to create
0CO_OM_NWA_1,
0CO_OM_NWA_2,
0CO_OM_WBS_1,
0CO_OM_WBS_6
Please help me.
Regards,
Bob.

Hi BOB,
Another option to find the table information...
inorder to get the tables names involved in that particular data source follow the below steps.
1) ST05 --> activate the Trace
2) RSA3 --> enter your data source (for ex: 0CO_OM_NWA_1)
3) Execute
4) Now goto ST05 -> deactivate the trace
5) click on Display trace(F7) button
6) Execute
7) It will display the complete SQL trace
8) Now from the Menu "Trace list" --> select "Combined Table Access"
it will display the complete tables list involved in that data source...
From Table name section you can get the list of tables involved in that data source.
I had traced and took the information of tables involved in that data source 0CO_OM_NWA_1
0CO_OM_NWA_1
AFKO     Order header data PP orders
AFVC     Operation within an order
AUFK     Order master data
COSP     CO Object: Cost Totals for External Postings
COSPP     Transfer of the Order in the COSP Table to the Project
COSS     CO Object: Cost Totals for Internal Postings
COSSP     Transfer of the Order COSS Table to the Project
COVREF     Coverage Reference Table: All Processing Blocks
COVRES     Table of Coverage Results
You can follow the same steps and find the tables for the rest.
Regards
KP

How to find the executables for OWB Client, Design and Runtime Repositories

Hi Guys,
I have installed OWB 10G in the my local desktop (in D Drive). From the start menu, I can see the menu options for OWB Client, OWB Design Repository and OWB Run time Repository. If I want to get that execuatbles from which location can I find out. All the menu options are pointing out into d:\OWB Home \....\bin\launch.exe, but when we hit launch.exe nothing is displayed on the screen. can anyone give their suggestions pls
Regards
Kishan

launch.exe is the executable but if you look at the lnk files in your start menu the launch exe is followed by two parameters where the last one points to a specific cl file (I'm guessing short for command line) in the same bin directory that also contains a number of parameters. Here all the java jar files are listed that are needed to launch the specific component and how much memory the application can/may use.
So you won't find a classic windows executable if that is what you are looking for. But why are you searching for this in the first place since you can just copy the shortcut/lnk file if you want shortcuts in other places?

My iPod was stolen and insurance company want it's serial number before replacing it. They have advised iTunes stores this information as a device connected to iTunes. Can anyone advise how I find this information?

IiPod serial number stored in iTunes, can anyone advise how I find this information for my insurance company?

Juliebathgate wrote:
IiPod serial number stored in iTunes, can anyone advise how I find this information for my insurance company?
Hi,
If you have made a backup at any time of your iPod in iTunes, it should be in Preferences, under Devices tab.
In iTunes
Open iTunes Preferences.
From the Preferences window click on the Devices.
Once you are there you should see a list under "Device Backups:".
Hover your mouse pointer to the device and in a little while it should display the serial number of the device (with an iPhone it will also display a phone number used with it and the IMEI code and with an iPad it will display the IMEI in addition to the serial number).
A pircture of where it can be found: http://km.support.apple.com/library/APPLE/APPLECARE_ALLGEOS/HT4946/en_US/HT4946- devices-iphone-001-en.png

How to find workarea ID for the work area name.

Hi Experts..
How to find workarea ID for the work area name.(Work area name CCIHT_WAH-WAID and I want to fetch characteristic data from table AUSP matching the OBJEK field,but I only have Work area name).Can anybody help me to find tables or relationship between Workarea ID and Workarea name for the same.I am using TCODE - CHIB02.Once I select a workarea and click on IHS Data button,I get data for that workarea.I need to find where this data comes from and How is this fetched.
Points would be rewarded for helpful answers..
Thanks
Kunal Halarnakar

U want to fetch the workarea description ?
we can fetch it from CCIHT_WALD table with the RECN value.
The informations are stored in AUSP table with the characterstic(ATINN) value.

Could not find installation information for this machine contact applecare

I installed Lion on my MacBook, worked great. After 2 months I wanted to clean install the Lion on the same Macbook; went to Apple Support website and there they had instructions on how to clean install Lion.
I followed the instructions and erased the partition where the OS Lion was installed. Then I tried to re-install it, it kept saying "could not find installation information for this machine contact applecare".
When I contacted apple care, they asked me to pay 49 dollars in order to get help from them. I already paid the cost for the LION OS and now they want another 49 bucks. This is just insane. I'm not a fan of Apple, Mac or iCrap. But I was thinking to buy a new Mac after selling this one. Now I have no interest in buying any Mac product. Windows 7 is much much better than Lion OS X.
I have to fix this before I sell it on ebay so Has anyone tried to clean install Lion ?

I'm with you, OS X Lion has turned a lot of stomachs.
Here's how to go about what you need to do:
Get out your 10.6 installer disk, make sure it's clean and polished (bit of rubbing alcohol and a very soft cloth)
Get 2 blank external drives, connect one and hold c and boot off the 10.6 installer disk, use Disk Utility to format the external drive use
Erase>Security Option> Zero all data, wait
under the partition tab
1 partition, option MBR, format FAT
Disconnect and reboot.
Repeat the same procedure for the second drive and format the
Erase>Security Option> Zero all data, wait
under the partition tab
1 partition, option GUID, format OS X Extended Journaled
Quit and install 10.6 on the external GUID drive.
Reboot holding the option key, you can boot off the 10.6 external drive, setup, use your same user name as before, update to 10.6.8, grab your files off the OSX Lion partition, transfer a copy to the FAT formatted drive.
What you do is your choice,
To continue using the machine under 10.6
you can erase the entire (select the whole internal drive, not just the OS X Lion Paritition) and use Carbon Copy Cloner to clone 10.6 external to the internal drive,
To sell the machine with a fresh 10.6 install
or simply hold c boot off the 10.6 installer disk and install 10.6 on the internal drive and upon reboot, just hard shutdown by pressing the powerbutton before going through setup. The next person who gets the machine will be greeted by the setup again.
You can use the files on the FAT drive on your Windows PC in some cases.
Else download the free LibreOffice and it can read quite a few file formats.

Could not find installation information for this machine

I tried to recover Mac OS X , but got message like this.
"Could not find installation information for this machine. Contact AppleCare."
I can not get detailed information of device because there is no system installed on Mac.
but I remember,It is intel iMac. ver 10.7. core 2 duo.
How do I install or recover system now?

Make sure that your network connection satisfies the requirements for Recovery or Internet Recovery, depending on which you're trying to use. If possible, connect to the router with Ethernet.
Restart the computer and try again.
Connect to a different network, if possible.
Wait a few hours and try again.
Make a "Genius" appointment at an Apple Store.

I get a message of "Could not find installation information for this machine." after trying to Reinstall Mac OS X.

I would like to repartition the Main HD to two Partitions but could not do so and keep on getting an error message of "Could not unmount disc.." so I tried choosing the "Macintosh HD" partition and tried Partitioning it but the option is not available. So to my frustration I tried clicking on "Erase" to see whether doing so would allow me to finally partition my HD but still can't. And now since I erased my Macintosh HD partition I could no longer boot to Lion.
Before doing the above steps I downloaded the Lion Recovery Disc Assistant and created an external Recovery HD using an 8GB flash drive. I used this as startup destination by choosing it as boot destination from pressing Option before startup. I tried using Mac OS X Utilities to Reinstall Mac OS X from the external drive but I only get "Could not find installation information for this machine." message. I also tried booting from the Recovery HD partition on the HD but i also get the same message.
I have a new iMac that came with OS X Lion 10.7.
Anybody have idea how to fix this?

Partitioning on-the-fly may fail if the disk is too fragmented. You cannot run Erase for the internal disk as it contains its system components. The same if trying to run Boot Camp in order to create the Windows partition, it may fail if disk is too fragmented.
If I correctly understand what you want, then you must boot from an external disk, therefore copy Lion to a 4 GB (or higher) flash drive, run the installer, and then choose the option to partition the disk, this is done after rebooting into the installer from the external drive. You cannot do that if the Lion installer is on the internal drive as it cannot erase or repartition itself.
If this fails (did you try this?), then perhaps you can try to create a Lion boot flash or DVD by using a non-Apple app called Lion DiskMaker, when ready restart, after chime press option / alt key, then choose to boot from this newly created boot disk or flash drive. This reportedly works OK (tried with an older version of Lion, not recently, was OK). It is better to work with a flash drive, Lion is not optimized to run from optical media.
WARNING: disregarding the method, you MUST always back up your data when repartitioning or installing / reinstalling.
Hope this helps to solve you issue. Before any attempt, backup, backup, backup.

Warning Messages - Could not find schema information for the element applicationSettings - App.Config of a console app

This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
   <configSections>
   <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
   <section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
   </sectionGroup>
   </configSections>
  <appSettings>
   <add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
  </appSettings>
  <applicationSettings>
   <IntelBrandFX.Properties.Settings>
   <setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
   <value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
   </setting>
   </IntelBrandFX.Properties.Settings>
  </applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,

You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org

How to find print preview for purchase order like what we find in va03

hi guru's
how to find print preview for purchase order like what we find in va03
let me share ur information
thank u

Hi
You can see the Print Preview/printout etc using the Transaction ME9F for Purchase Order
Execute the ME9F tcode and execute you will get lot of PO's select any Po and press display message
you will see the print preview
Similarly for RFQ output use the Tcode ME9A
for Contrat use ME9K
for GR output use MB90
Reward points for useful Answers
Regards
Anji

HOw to find the text for PERSK field in infotype 0001

hi all
HOw to find the text for PERSK field in infotype 0001

Hi
T503T : contained the similar informative text for PERSK . read this for T503T-PTEXT.
..lakhan

How to find system status for production orders?

How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guide

Hi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva

I downloaded lion but lost the setup assistant. please help me recover the setup assistance. i do not know where/how to find/enter information in the terminal.

i downloaded lion but lost the setup assistant. please help me recover the setup assistant. i do not know where/how to find/enter information in the terminal as was suggested.

Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
sudo rm /var/db/.AppleSetupDone
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
Reboot. The Setup Assistant will launch.

HT4848 Can't find "installation information for this machine"

I have a brand new Mac Mini that came with Mountain Lion Server pre-installed. After having some difficulty(s) migrating from Snow Leopard I wish to revert to a clean re-install and start over. When I attempt to do this I get "Could not find installation information for this machine."
Any help appreciated.
Urgent !!!
Thanks,
Aunty

How are you trying to do the re-install? Are you using the Recovery HD or Internet Recovery. Information here on how to proceed:
http://support.apple.com/kb/HT4718
If you do an erase and install so that the Mac needs to be setup as if straight out of the box, then Setup Assistant is probably a better way of restoring your data from backup. Details here courtesy of Pondini:
http://pondini.org/OSX/SetupLion.html

Unable to find moniker information for archive collection ArchiveCollection

In attempting to setup archive transfer between PROD and DEV I needed to rename an existing outgoing provider and the only way I found I could do this is to delete the existing provider and recreate it with a new name. I think by doing this it has caused and issue and now the CS log displays an error similar to below:
Unable to find moniker information for archive collection ArchiveCollections. The collection ecmprd2 has no information associated with it. It no longer exists in the system. [ Details ]
An error has occurred. The stack trace below shows more information.
!csMonikerUnableToFindArchiveInfo,ArchiveCollections!csArchiverCollectionNotFound,ecmprd2
intradoc.data.DataException: !csArchiverCollectionNotFound,ecmprd2
     at intradoc.server.archive.ArchiveUtils.getCollection(ArchiveUtils.java:492)
     at intradoc.server.MonikerWatcher.parseMonikerInfo(MonikerWatcher.java:325)
     at intradoc.server.MonikerWatcher.computeMonikers(MonikerWatcher.java:248)
     at intradoc.server.MonikerWatcher.notifyWatched(MonikerWatcher.java:154)
     at intradoc.server.Service.notifyWatched(Service.java:710)
     at intradoc.server.Service.updateSubjectInformation(Service.java:670)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1128)
     at intradoc.server.Service.executeActions(Service.java:433)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
     at intradoc.server.Service.doRequest(Service.java:1707)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Does anyone know if this is caused by deleting the existing outgoing provider and if it is how can I resolve it?
Regards,
Andrew

I misspoke when I said to recreate the outgoing provider because an outgoing provider only provides the "connection" from DEV to PROD. What I meant is that if the provider is deleted and the automated archives are left alone, they would fail because that connection is gone. Since you recreated an outgoing provider (even with a different name), that connection should be there again.
I highly doubt each archive "stores" the name of the outgoing provider in its configuration, so I doubt either of those options would work. The only thing that makes sense is that the collection is "gone" (ie. DEV cannot find 'ecmprd2') or the PROD collection isn't called 'ecmprd2' anymore. I'm assuming "ecmprd2" is the instance name of your PROD instance, right? If you can, try deleting all archives and see if the error exists afterwards.
Why did you have to "rename" the provider to begin with?

How to find verion information for owb?

Similar Messages

Maybe you are looking for