How to generate accesskey string for parent-to-child buttons using JHeadsta

Dear All,
I've tried to generate detail buttons with access key functionality. When I prefix an ampersand to the 'Display Title (plural)' property of a (detail) group in the JHeadstart application definition, access key functionality is generated for the parent-to-detail buttons.
The same property, however, is used for the Table title, so that the '&' appears in the title. This is not desirable.
Is there any other way?
Many thanks,
Ibrahim

Dear All,
I found a way to achieve this, so please disregard this post.
My apologies for the inconvenience.
Regards,
Ibrahim

Similar Messages

How to generate xml-file for SAP Fiori (UI add-on) with Solution Manager 7.0.1?

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

Hello Guru,
could you please help with my issue with Fiori Installation.
We want to install SAP Fiori Front-End (GW+UI) on the Sandbox system with SAP Netweaver 7.3.1. (SP14)
Gateway component (SAP GW CORE 200 SP10) was installed without any problems.
But I need to install UI-add-on (NW UI Extensions v1.0) and when I try to install it via SAINT, transaction said me that I need to generate xml-file for it (as in General notes for UI add-on mentioned).
But I have Solution Manager 7.0.1 and in MOPZ for this version I do not have option "install Add-on" as it written in Guide for ui add-on installation.
Could you please help me with advice how to generate xml-file for UI add-on installation on SolMan v.7.0.1?
If where is no way, but only to upgrade Solution Manager, maybe somebody could give me xml-file for your system (for NW 731) and I will change it to my needs, I will be very grateful!
Thanks in advance for any help!!!
Bets regards,
Natalia.

How to generate an Interupt for DMA transfer from Counter on NI-PCI-6602

dear guys:
      how to generate an Interupt for DMA transfer from Counter on NI-PCI-6602,and I have set the DMA and DMA_INT, and also the global interrupt register.
but there is no Interupt generated in the Interupt callback function.And when I have set the DMA_INT and global interrupt register ,and then read the relevant register,the relevant bit is also 0.
     I suspect there is an Interupt register contral, like the MITE, you must write the value to 0xc4 for opening .
     there is some codes In my enclosure .What can I do?
Attachments:
TEST.C ‏21 KB

dear Steven_T:
        the registers are In my enclosure ,if you have some ideas,please reply me first time.thank you !
Attachments:
PCI6602.pdf ‏818 KB

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

Some strings for which expression pedal is used is recorded well but during esch playback I have to move the modulation wheel. How can I resolve to hear my instrument during playback without twikking on the wheel !

I am having the same problems. My guess is that a lot of people are having the same problems and just living with it. Those of us who know where to go on the Internet come here to find a fix.
It seems Verizon has some explaining to do. Maybe they should try Beta testing new software a little better. I would rather have to wait longer for something that works. I am sure that some manager or director said this is close enough, deploy it and we will see what happens. Well, you are seeing the problems. Time to fix your mistake.
All of us are telling our friends about the problems. The longer this goes on, the more people we will tell about it.
Wouldn't you rather us be telling our friends that their is an error in the new interface and that you are working hard to fix it?
If you want to be up front about this, then just tell us. We are adults and can handle it. If you made a mistake, own up to it and give us some credit for doing your Beta testing in the field.
Customer Service is all about telling the truth and if you made a mistake, admit it and lets move on with a fix. I do not want to be told again that I should be able to unplug it, power cycle it, try the on-board diagnostics, etc., etc.......
I am going to be repsonding on a daily basis to keep this topic at the top of the list.
Time to come clean. You will feel better Verizon.
Let's talk tomorrow.

How to generate BP number for the employee (ECC to CRM) ...

Hi all,
can any one give solution for ,how to generate BP number for the employee from ECC to CRM other than active status,as i downloaded employee data from ECC to CRM through ALE/IDOC,as only active employment status employees are got BP number generated,remaining also transfered to CRM but BP number is not generated for those employees,these employee records i can able to see in the HRP5580- HRP5587 tables.
thanks in advance.
vamshi.
Message was edited by:
vamshidher rao

Hi,
Or are you looking for this:
SELECT serial_number, paaf.assignment_number
FROM pay_assignment_actions paa, per_all_assignments_f paaf
WHERE action_status = 'C'
AND paaf.assignment_id = paa.assignment_id
AND serial_number IS NOT NULL
AND SYSDATE BETWEEN paaf.effective_start_date AND paaf.effective_end_date;
- Viky
Edited by: Viky on Dec 17, 2010 11:42 AM

How To Generate Spool request for a SAP-Script form

How To Generate Spool request for a SAP-Script form

Hai Rahaman,
After getting the print preview of the SCRIPT.
Click On PRINT.
Buttom of the page one spool request will be generated by system.
Go to SP01.
You Can Find SPOOL Reqest Number.
Regards.
Eshwar.

How to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

how to create apple id for mac app store without using credit card and there is no any option for payment none. please tell how to download free apps from mac app store

my problem solve by me
first create apple id
fill credit card details
and complete your account creating process.
than go to app store or itune store
login your acount
click right side - account button
than again login for account setting
next go to payment information and click edit button
when u enter payment infomation
click none button in payment method and click done button.
than ur credit card has been removed.
but rs. 60 will deducted in your account when u doing this process.

How to generate test data for all the tables in oracle

I am planning to use plsql to generate the test data in all the tables in schema, schema name is given as input parameters, min records in master table, min records in child table. data should be consistent in the columns which are used for constraints i.e. using same column value..
planning to implement something like
execute sp_schema_data_gen (schemaname, minrecinmstrtbl, minrecsforchildtable);
schemaname = owner,
minrecinmstrtbl= minimum records to insert into each parent table,
minrecsforchildtable = minimum records to enter into each child table of a each master table;
all_tables where owner= schemaname;
all_tab_columns and all_constrains - where owner =schemaname;
using dbms_random pkg.
is anyone have better idea to do this.. is this functionality already there in oracle db?

Ah, damorgan, data, test data, metadata and table-driven processes. Love the stuff!
There are two approaches you can take with this. I'll mention both and then ask which
one you think you would find most useful for your requirements.
One approach I would call the generic bottom-up approach which is the one I think you
are referring to.
This system is a generic test data generator. It isn't designed to generate data for any
particular existing table or application but is the general case solution.
Building on damorgan's advice define the basic hierarchy: table collection, tables, data; so start at the data level.
1. Identify/document the data types that you need to support. Start small (NUMBER, VARCHAR2, DATE) and add as you go along
2. For each data type identify the functionality and attributes that you need. For instance for VARCHAR2
a. min length - the minimum length to generate
b. max length - the maximum length
c. prefix - a prefix for the generated data; e.g. for an address field you might want a 'add1' prefix
d. suffix - a suffix for the generated data; see prefix
e. whether to generate NULLs
3. For NUMBER you will probably want at least precision and scale but might want minimum and maximum values or even min/max precision,
min/max scale.
4. store the attribute combinations in Oracle tables
5. build functionality for each data type that can create the range and type of data that you need. These functions should take parameters that can be used to control the attributes and the amount of data generated.
6. At the table level you will need business rules that control how the different columns of the table relate to each other. For example, for ADDRESS information your business rule might be that ADDRESS1, CITY, STATE, ZIP are required and ADDRESS2 is optional.
7. Add table-level processes, driven by the saved metadata, that can generate data at the record level by leveraging the data type functionality you have built previously.
8. Then add the metadata, business rules and functionality to control the TABLE-TO-TABLE relationships; that is, the data model. You need the same DETPNO values in the SCOTT.EMP table that exist in the SCOTT.DEPT table.
The second approach I have used more often. I would it call the top-down approach and I use
it when test data is needed for an existing system. The main use case here is to avoid
having to copy production data to QA, TEST or DEV environments.
QA people want to test with data that they are familiar with: names, companies, code values.
I've found they aren't often fond of random character strings for names of things.
The second approach I use for mature systems where there is already plenty of data to choose from.
It involves selecting subsets of data from each of the existing tables and saving that data in a
set of test tables. This data can then be used for regression testing and for automated unit testing of
existing functionality and functionality that is being developed.
QA can use data they are already familiar with and can test the application (GUI?) interface on that
data to see if they get the expected changes.
For each table to be tested (e.g. DEPT) I create two test system tables. A BEFORE table and an EXPECTED table.
1. DEPT_TEST_BEFORE
     This table has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look BEFORE the
     test for that test case is performed.
     CREATE TABLE DEPT_TEST_BEFORE
     TESTCASE NUMBER,
     DEPTNO NUMBER(2),
     DNAME VARCHAR2(14 BYTE),
     LOC VARCHAR2(13 BYTE)
2. DEPT_TEST_EXPECTED
     This table also has all EMP table columns and a TEST_CASE column.
     It holds EMP-image rows for each test case that show the row as it should look AFTER the
     test for that test case is performed.
Each of these tables are a mirror image of the actual application table with one new column
added that contains a value representing the TESTCASE_NUMBER.
To create test case #3 identify or create the DEPT records you want to use for test case #3.
Insert these records into DEPT_TEST_BEFORE:
     INSERT INTO DEPT_TEST_BEFORE
     SELECT 3, D.* FROM DEPT D where DEPNO = 20
Insert records for test case #3 into DEPT_TEST_EXPECTED that show the rows as they should
look after test #3 is run. For example, if test #3 creates one new record add all the
records fro the BEFORE data set and add a new one for the new record.
When you want to run TESTCASE_ONE the process is basically (ignore for this illustration that
there is a foreign key betwee DEPT and EMP):
1. delete the records from SCOTT.DEPT that correspond to test case #3 DEPT records.
          DELETE FROM DEPT
          WHERE DEPTNO IN (SELECT DEPTNO FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3);
2. insert the test data set records for SCOTT.DEPT for test case #3.
          INSERT INTO DEPT
          SELECT DEPTNO, DNAME, LOC FROM DEPT_TEST_BEFORE WHERE TESTCASE = 3;
3 perform the test.
4. compare the actual results with the expected results.
     This is done by a function that compares the records in DEPT with the records
     in DEPT_TEST_EXPECTED for test #3.
     I usually store these results in yet another table or just report them out.
5. Report out the differences.
This second approach uses data the users (QA) are already familiar with, is scaleable and
is easy to add new data that meets business requirements.
It is also easy to automatically generate the necessary tables and test setup/breakdown
using a table-driven metadata approach. Adding a new test table is as easy as calling
a stored procedure; the procedure can generate the DDL or create the actual tables needed
for the BEFORE and AFTER snapshots.
The main disadvantage is that existing data will almost never cover the corner cases.
But you can add data for these. By corner cases I mean data that defines the limits
for a data type: a VARCHAR2(30) name field should have at least one test record that
has a name that is 30 characters long.
Which of these approaches makes the most sense for you?

How to change connection string for a form created with b1de

Hi all
i've created a form using the Code Generator tool ob B1DE
My question is how can i set the connection string to a different server and database. doing so after the creation wizard has finished?

Hi,
Why do you need to change the connection string? What are you calling "connection string for a form"???
The only connection string I now about is the one used to connect to the UI API... and this one is fixed for all apps in debug mode and given as parameter when your addon is registered in B1.
The connection string is filled in the code of your generated addon.
Please go to the main class of your addon, in the main method you have the following code where the connection string is filled either with the command line parameters (release mode) or with the fixed value given by SAP. This code doesn't need to be changed...
        public static void Main()
            int retCode = 0;
            string connStr = "";
            bool diRequired = true;
            // CHANGE ADDON IDENTIFIER BEFORE RELEASING TO CUSTOMER (Solution Identifier)
            string addOnIdentifierStr = "";
            if ((System.Environment.GetCommandLineArgs().Length == 1)) {
                connStr = B1Connections.connStr;
            else {
                connStr = System.Environment.GetCommandLineArgs().GetValue(1).ToString();
            try {
                // INIT CONNECTIONS
                retCode = B1Connections.Init(connStr, addOnIdentifierStr, diRequired);
Regards
Trinidad.

How to encode sql string for SQL Server when using JDBC?

in code, dynamically generate sql stirng like:
String sqlstring = "select column from table where column=' " + var + " ' ";
Question is: if var include char ' , it will cause error becuase ' is reserved by SQL Server for string reference.
So how to encode string for dynamic sql string? for example, following sql(when var =" I'm tester"):
select column from table where column like ' I'm tester '
Edited by: KentZhou on Jun 17, 2009 3:10 PM

Use PreparedStatement. Use it all the way. It not only saves you from SQL injections, but also eases setting non-standard Java objects like Date and InputStream in a SQL statement.
Prepare here: [http://java.sun.com/docs/books/tutorial/jdbc/basics/prepared.html].

How to generate random strings

Gday all,
So I have to create a simple guessing game where the user guesses a 3 letter string that is randomly generated:
"For each new game your program will generate three unique random numbers between 0 and 9
inclusive, and convert them into a String of three characters in the range A to J. This String will be an
input to a game, where the user tries to guess the correct letters in the correct order. Examples of valid
input Strings would be, �JAD�, �ABC�, �IBE� and �EFG�. Examples of some invalid input Strings could be
�abc�, �AAA�, �123�, �AdE� or �NME�."
Just wondering how to create this random string? I know how to generate a random 3 char number (num = (int) (Math.random() * 1000)) but I dont know how to convert this into a corresponding string, as the instructions say.
I know this is very basic, but any tips?

I know how to generate a random 3 char number (num = (int) (Math.random() * 1000)) but I dont know how to convert this into a corresponding stringUse string concatenation (+ with one or two String operands).
int i = 42;
char ch1 = '*';
char ch2 = '!';
String str = "foo";
// the System.out.println() is not important
// in each case a string is being created and printed
System.out.println("" + i);
System.out.println("2 times i = " + (2 * i));
System.out.println(i + "*2=" + (2 * i));
System.out.println("" + ch1 + ch2); // hint, hint
System.out.println(1 + 2 + "???");
System.out.println("???" + 1 + 2);

How to generate web services for OAS with wsdl extension

Hi,
I wanted to know how to generate web services from Oracle Application Server especially with .wsdl extension and with document/literal style.
I know that earlier there was a tool called SmartConnect from BEA WebLogic.
But that will work only with ALSB (Aqua logic Service Bus). I guess that ALSB has been renamed as Oracle Service Bus by Oracle after the acquisition of WebLogic. My question is what is the new name for the SmartConnect Tool from WebLogic, which generates wsdl very easily from Oracle database.
I am unable to know the new name for SmartConnect and how to download that tool from Oracle web site.
Also, I want to know, whether there is any other way to generate the wsdl from Oracle, if so, please let me know.
Regards
Raman

Hi Jeethandra,
Please refere to the below link might be some help.
[http://help.sap.com/saphelp_mdmgds55/helpdata/en/45/069152856241e1e10000000a1553f6/frameset.htm]
regards
shankar

How do I retrieve password for parental restrictions?

How do I retrieve the password for parental restrictions? Two years ago, I passed down my old Mac to my child & added a 9:00 p.m. time restriction; now, I'd like to remove the restriction, but have forgotten the password. Is there any way to retrieve or change the original password? Thanks in advance for any and all responses.

Mac OS X: Changing or resetting an account password

How to generate columnar PDM for HANA?

Hi Folks,
I'm quite new to PowerDesigner and have been working on generating a HANA database from MS SQLServer.
Currently I've been able to import a source SQLServer system as a Physical Data Model in PowerDesigner. I was then able to generate SQL DDL scripts to generate the DB manually in HANA, and I also watched a video about how to generate the DB directly in HANA via a connection to the repository which seems straightforward.
The challenge that I'm current facing is how to alter the entire PDM to make *all* tables of type "column" rather than "row". Since SQLServer was the source system, rather than HANA, PowerDesigner appears to default to row store... (shouldn't PD's default storage type for HANA DB's be column store by default? This make substantially more sense than row store by default... but I'm digressing.)
I can see how to do this on a table-by-table basis, but haven't yet figured out how to cascade this setting to the whole PDM. Any assistance would be very much appreciated!
I also tried following this documentation, which didn't help much... it doesn't correspond with the windows/tabs/options that I'm seeing in PD 16.5 - http://infocenter.sybase.com/help/index.jsp?topic=/com.sybase.infocenter.dc38058.1653/doc/html/oba1320752560336.html
Thanks!

Hi
If what to want is globally change the Type of all the tables in a PDM, you can do it by using the List of Tables. You display the "Type" column in the grid and change the Type value from Row to Column while doing a multi selection
veronique

How to generate Sequence Diagrams for existing code

Hi,
I have a web application written in Java/Jsp's. I am looking to generate sequence diagrams automatically for the existing source code using this tool. I am not sure if this is possible using this tool. Can some one please explain me if that is possible using this IDE tool? If so can you please let me know how this can be done?
Any response is greatly appreciated.
Thanks in advance.
Vijay

Hi,
Yes, you can reverse engineer operations and create sequence diagrams using Java Studio Enterprise.
Just right-click on the operation in the UML model that has the source file associated with it, and select "Create Diagram from Selected elements" or "Reverse Engineer Operation".
Thanks!

How to generate accesskey string for parent-to-child buttons using JHeadsta

Similar Messages

Maybe you are looking for