How to generate automatically email to SAP user and Non SAP User

Dear Expert,
My client want a report on each Monday on  sales/purchase detail of his/her particular  email ID which is automatically generated from SAP DB.
Some are SAP user that we can do it by alert message but for some who are not SAP user how to send them a email ?
Can we do in SAP B1 ?
even i try with Outlook but I am not getting.
*please give me answer in detail
Thanks
Kevin

any update ?
I have create a query and a common output is share to all user, is it possible to group the output and share to particular user ?
Our client req. is particular sales man should get evry monday morning his outstanding amount from client ?
My query give the entire all sales Outstanding and send to all user all detail....i want to filter A user should only get detail A outstanding ?
Thanks
Kevin

Similar Messages

  • How to generate an email on a database event?

    Dear gurus...I've heard about diferent ways of generating email in response to a database event e.g
    1 - Using UTL_MAIL package
    or
    2 - Event Driven Reporting feature of 10g Database and using SRW.Run_Report package to generate and mail a report.
    Now I'm confused that how should I accomplish the following tasks:
    (i) - How to generate an email after Insert/Update/Delete on a table and acknowledge the concerned users about that event?
    (ii) - How to attach a text file with that email?

    Dear Ivan...I've tried both UTL_SMTP and UTL_MAIL, UTL_SMTP is working well and sending mails but following code of UTL_MAIL is giving the error which I can't guess, why?
    DECLARE
    CRLF CHAR(2) := CHR(10) || CHR(13);
    BEGIN
    UTL_MAIL.SEND(sender => '[email protected]',
    recipients => '[email protected]',
    cc => NULL,
    bcc => NULL,
    subject => 'Test Email',
    message => 'Test line1' || CRLF || CRLF || 'Test line2',
    mime_type => 'text/plain; charset=us-ascii',
    priority => 1);
    END;
    and the error is:
    ORA-29279: SMTP permanent error: 554 Message is not RFC compliant
    ORA-06512: at "SYS.UTL_SMTP", line 20
    ORA-06512: at "SYS.UTL_SMTP", line 98
    ORA-06512: at "SYS.UTL_SMTP", line 345
    ORA-06512: at "SYS.UTL_MAIL", line 577
    ORA-06512: at "SYS.UTL_MAIL", line 594
    ORA-06512: at line 4
    could u guess why this error is generating???
    P.S...I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production on MS-Windows Server-2003.

  • How do I extract email from a form and send the PDF to that user?

    How do I extract email from a form and send the PDF to that user?

    here you can add email to send to, CC, Subject, and body message
    var oDoc = event.target;
                        oDoc.mailDoc({
                                                                bUI: false,
                                                                cTo: "Agency Contact Email",
                                                                cCC: "",
                                                                cSubject: "Write your title here,
                                                                cMsg: "Dear" + AgencyContact + "(" + AgencyContactEmail + ")\nThe student, " + FirstName + " " + LastName + " has applied to work at your agency. Please confirm they can work here blah blah blah.......\n\nThanks.\n\nrespectuflly,\n\nme"

  • Anyone know how to send automatic email notification in OA?

    Any where I can find a resource about how to send automatic email notification?
    say, samples, reference?
    please advice, thank you very much

    integrate your application with oracle workflow and send a notification from the mailer.
    details of working with workflow is there in the dev guide
    Thanks
    Tapash

  • How to send an  email to external user (offline form) from se38

    Hi all
    how to send an  email to external user (offline form) from se38 and upload the same from recipent.
        we have sent mail using scripts and smartforms but couldnt do here. It will be helpful if you can give us any sample code
    regards
    mohammed

    Hi,
    Have a look at this thread [Re: Sending PDF forms (created using SFP) as Email Attachment]  i explain all the solution with a sample code .
    Hope it's help you
    regards

  • How to generater automatically getters and setters???

    Hi!!!
    Boys and Girls, how to generate automatically getters and setters like eclipse dialog or shortcut, using bea workshop(jpf file)?
    Best Regards,
    Pablo

    can anyone tell where i can find libraries for access/manipulate beans.
    and sample example to invoke getters and setter of the property but not like preparing String "setPropertyName" or "getPropertyName" and invoking the method i beleive there should be standard way
    and also setPropertyName may take different type parameters i cannot keep number of if conditions to check for different datatypes
    with regards
    satya

  • How can I automatically email the completed form as a pdf for signing to the respondent?

    how can I automatically email the completed form as a pdf for signing to the respondent?

    Have your husband text the word "stop" to 48369. This should take his number out of the iMessage system.
    Go into your settings under messaging and make sure the box to send as an SMS if iMessage is unavailable is checked.
    Hopefully this will get your messages sending/receiving to each other.

  • How to generate automatic PO by MRP run

    how to generate automatic PO by MRP run ?
    tell me the settings for that.

    Hi,
    Basic Settings: SPRO-MM-CBP-Planning->>MRP should be activated for that particular plant.
                            SPRO-MM-CBP-Plant Parameter->>maintain for particular plant
    Material master: Maintain MRP views with required MRP Type, MRP Controller, Lot size, Flag Auto PO
    Vendor master: Flag Auto PO
    Info record (Must) / Soure list (Preferred)
    1. MD21 - Planning file concept : where you can see the list of material required to plan for procurement.
    2. MD03 - Run MRP . Production oder or Purchase Requisition will be created
    3. ME57 - Assign Souce & process PR
    4. ME59n - Auto PO created from PR
    Note: if we maintain sourcelist with MRP indicator, we can avoid transaction ME57n.

  • How to delete an email simultaneously from iPad and iMac?

    How to delete an email simultaniously from iPad and iMac?

    If you have iCloud activated on both that's what will happen.

  • How do I delete email from my iPad and iPhone without deleting it from my laptop?

    how do I delete email from my iPad and iPhone without deleting it on my laptop. I'm trying to free up space.

    It would depend on the type of mail account you are using. If you have an IMAP or Exchange account deleting mail from one client is going to sync to the other clients. You cannot remove from one device and not the others. POP mail however, does allow one to delete mail from one client and it remain on the other clients. Because POP mail is downloaded to the individual clients, whereas mail in IMAP and Exchange resides on the server, and is just viewed on the individual machines.

  • How to generate reports of registered IP handsets and their corresponding extension on call manager 4.2.3

    Hi
    how to generate reports of registered IP handsets and their corresponding extension on call manager 4.2.3
    I checked the route plan report and the generate report function on the BAT.. however it doesnt has the feature to generate only the registered IP phone with its coresponding extension
    Thanks
    Kind regards
    Rachel

    Call manager provides the called party with the extension or directory number of the calling party on a display. You can use the Calling Line ID Presentation field in the Gateway Configuration window to control whether the CLID displays for all outgoing calls on the gateway.Refer URL
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e48b.html#wp1051056

  • How to generate a notification when a user changes his password?

    Hi all,
    I have OIM 11.1.1.5.0 BP02 installed. When an administrator resets a user's password, the following email is sent to the user:
    Password has been reset for user <Firstname> <Lastname> . You will be required to change your password on next login.
    First Name: <Firstname>
    Last Name: <Lastname>
    Password: passW0rd
    +For any issues, please contact [admin email or phone]+
    My requirement is to generate a similar email when a user changes his/her own password. How would I go about doing this?
    Thanks in advance.

    You can use an event handler for this.
    Write your own code as a plugin for the event handler (refer to the developers guide for details on event handlers) then you can reference this from your custom event handler XML configuration with operation "CHANGE_PASSWORD"
    e.g.
    <action-handler class="<CLASS NAME>" entity-type="User" operation="CHANGE_PASSWORD" name="<EVENT HANDLER NAME>" stage="postprocess" sync="TRUE" order="2000" />
    The action "RESET_PASSWORD" is also available for administrator change.

  • Set Automatic email in SAP

    Good day friends,
    I hope this is the right place to post this question, if not please do not kill me
    I have some jobs scheduled with Control M agent ( automatic jobs ) ... that are failing from time to time, and they are monitored somehow, and generate a Tivoli alert to create a ticket for this.
    The point is that, I would like these jobs not to be monitored, or in the other case to send some automatic mail to customer directlly from SAP.
    Is it possible to do such thing on SAP ?
    Can you please advise the best option ?
    Daniel.

    Hi Greg,
    I could set the automatic mail in the soluti_manager tx + Automatic email transmission in the settings tab.
    Thank you

  • How to Generate a Report Based on User's Parameters from Web Site

    Hi, all,
    I am trying to use Oracle Developer 6.0 Report Builder to generate report based on what user types in from the web site. Since I am a novice, I am wondering if anybody would help me with the following questions:
    1. How can I create a report based on user's parameters?
    Assuming that I have 2 text fields EMPNO and DEPT on the web site, after user types in some value, how can I pass these parameters into my query, can I do something like:
    select ENAME, JOB, EADDRESS from EMP
    where EMPNO =
    some_reference_of_parameters_from_user
    or is there any other way to achieve this functionality?
    2. How can I pass a PDF format report back to user after the report is generated?
    Any help is greately appreciated!!
    Best regards.
    Judy

    Hello,
    In the Report Builder, create two user parameters, and set the parameter name, datatype, width, and default values to what you want. Modify the query and put in a where clause (e.g., where deptno = :p_deptno). When you request the report with PARAMFORM=YES on the URL, it'll generate a default parameter form in HTML and allow the user to enter in the selected parameter values. Also set DESTYPE=CACHE&DESFORMAT=PDF on the URL to get the output back as PDF.
    If you upgrade to Reports 6i, you can customize the default HTML parameter form.
    Regards,
    The Oracle Reports Team --skw                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • How to generate crystal report in sap application

    hi,,
    i  want to  generate crystal report  through sap application...
    How  is it possible ....?
    could you help me  in details?
    Plz  help me???????????

    STEP 1: Like any other add-on project, refer SBO UI and DI COM to your project. Initialize SBO APPLICATION object and SBO COMPANY object and listen to events. (This is standard add-on project steps)
    STEP 2: Add a Dataset to the project. This is used as a data source to your Crystal Reports. (For more information on this search for Push Technique Crystal Reports)
    STEP 3: Add a Windows Form to your Project.
    STEP 4: Add a Crystal Report Control to it.
    STEP 5: Design report based on dataset added above.
    STEP 6: Launch this Form with required parameters and selection criteria when any even happens.
    Remember there is lot stuff available on net if you search with PUSH TECHNIQUE CRYSTAL REPORT. SAP SDN has lot answers for adding Crystal Reports integration to SAP Business One Add-On.
    HTH
    B Ravi Shankar

Maybe you are looking for