How to generate Cheque Automatically using programmatically
Hello Abapers,
My requirement is i need to generate check Number automatically.For this i created payment document number using tcode f-48 and i passed the same document to rffous_c(Payment medium program which generates Check Number Automatically).It is giving error as NO records are selected.what type of document if i pass to rffous_c program i can get check number automatically.Please solve my problem.
Regards
Maruthi.K
Hai Peram,
Thanks for your reply.I dont want to run F110.With out running f110 is there any procedure to generate payment document number and by using the payment document i will execute payment mediun program(RFFOUS_C program) externally and i will get the check number.THis is my Requirement which i need in the following process.
Regards
Maruthi.K
Similar Messages
-
How to generate an invoice output programmatically?
I need to generate an invoice output(Sapscript or smartform output) pragrammatically by input an invoice number and then I can obtain its spool number.I have known how to get its spool number already. Now my concern is how to generate an invoice output programmatically. Who can give me some hints here? Thank you very much.
Hi Sudhir, Thanks for your helps. But I think I may in a wrong way for my issue. Though RSNAST00 cannot process those existed invoices due to their dispatch time (NAST-VSZTP) or status (NAST-VSTAT), while those invoices could still be printout by using VF31, I may NOT SUBMIT RSNAST00 in my function module, instead I should look for other proper print program to be submit. My function module should process those existed invoices as well without changing their NAST date.
So if you have any suggestion to other print program (maybe some program above RSNAST00), please advice.
Thanks and have a great long weekend.
Jack -
How to generate pwm pulse using NI DAQ in MATLAB
hi everyone. please tell me how to generate pwm pulses using Ni DAQ card in MATLAB Simulink. if through coding is possible then post the corresponding code.....reply me
Make sure you have installed the Measurement studio support for VB 6.0 then you will be able to find examples in the folder below on win7 and 8.
C:\Users\Public\Documents\National Instruments\NI-DAQ\Examples
Narrow down to Analog Output and choose update voltage example for measurement studio.
You also have the possibility to use DAQ assistant if you have measurement studio installed. This function is a configuration type programming. After going through the configuration Wizard code is automatically scripted for you so that you can output the voltage you need. Read more about DAQ assistant in the blow link.
http://www.ni.com/white-paper/4652/en/
Best Regards
Jonas Mäki
Applications Engineering
National Instruments -
How to generate addm report using grid
Hi,
how to generate addm report using grid, please provide any relevant doc/links etc.
Thanks in advance.how to generate addm report using grid, please provide any relevant doc/links etc.When you start with the wrong question, no matter how good an answer you get, it won't matter very much.
what is best way to divide board into 2 pieces using a hammer?
Edited by: sb92075 on Oct 25, 2010 7:22 AM -
How to generate multiple sheets using xml publisher
Hi,
how to generate multiple sheets using xml publisher.
Thanks,
Nurhttp://lmgtfy.com/?q=how+to+generate+multiple+sheets+using+xml+publisher
-
How to generate Webservices.xml using tool in Sun One App Server?
How to generate Webservices.xml using tool in Sun One App Server?
Hi,
The build.xml file should be in a directory from where
you are running the asant command.
To resolve the common.xml file not found error,
open your build.xml and check from which location the common.xml file is incuded.
In the sample application it is four directories above
the directory where build.xml is located.
You can copy the common.xml in the current directory and then change the following in your build.xml
<!ENTITY include SYSTEM "../../../../common.xml">
to <!ENTITY include SYSTEM "common.xml">
Hope this helps.
Get back in case you have more issues -
How to generate PDF automatically.
Hello,
I am generating INVOICES using REPORTS 6i.
After created the PDF format, I send to the customer by email.
I would like to do this process automatically.
So how can I generate PDF automatically?
There is any pl/sql functionality available to generated PDF automatically.If so how can I generate similar like report 6i format and symbols (Logo).
Pls give me some ideas.
Thanks,Kannan.KKannan,
a scheduler is part of Reports, with which you can automate to generate Reports. There's a Queue Manager with your installation. But for this you need Application Server based Reporting - not Client/Server.
Also it's possible to send an PDF-Report as an EMail-attachment directly. Starting with 9i there's also an PL/SQL-API available (Event-based Reporting).
regards
Rainer -
How to generate username automatically while user creation in OIM.
Hi all,
Could you please send me steps for how to generate user name automatically by using adapter while creating the user in OIM.Follow this link:
[http://download.oracle.com/docs/cd/B32479_01/doc.903/b32457/creadp.htm|http://download.oracle.com/docs/cd/B32479_01/doc.903/b32457/creadp.htm]
It will help you to make each adapter which you want but for this you'll have to create entity adapter. -
Generate CSV automatically using excel macro
Hi,
We actually make dimension hierarchy in excel and then make a CSV file and then load it into planning application. The CSV file containing parent child relationship of dimension members and other properties are made manually.
Can anyone help me regarding how can we generate CSV file automatically using excel macro and vba editor for dimension loading purpose???
Thanks
Agniva ChatterjeeYou would need to write the VBA code yourself to populate the spreadsheet, I am not sure what you are expecting the forum to provide.
Cheers
John
http://john-goodwin.blogspot.com/ -
How to generate localized chars using code point in Solaris 10?
Hi All,
Do enybody know how to generate localized chars (for example Japanese) using code points in Solaris 10?
Like in the following web page:
http://www.isthisthingon.org/unicode/index.phtml
Unicode, shift-jis
U+4e2f 87a3 �N
U+4e3b 8ee5 ��
U+4e3c 98a5 �S
U+4f5c 8dec ��
Thanks,
DanielI have found a "Code Point Input Method" tool in the following page:
http://java.sun.com/products/jfc/tsc/articles/InputMethod/inputmethod.html
Using this tool user can enter hexadecimal code point and the output is some char.
But this tool doesn't work. I run this in the follwoing way:
# java -jar CodePointIM.jar
After this error message appers:
Failed to load Main-Class manifest attribute from
codepointim.jar
If anybody could help I will be appreciate.
Regards,
Daniel -
How to generate Java source using clientgen WL8.1?
Hi, does anybody know how to generate Java source code using clientgen task on WL 8.1 Sp4 or SP5? I know WL 9.0 clientgen can do this, but we are still on SP5. Basically I want to look at the source code (I was wondering why it didn't work if I initialize a service impl by passing the WSDL URL string different than the URL specified in the original WSDL file that the clientgen is run against.)
Does anybody also know how get web service client developed on Axis work on WebLogic without conficting the web service developed on WebLgoic that is running in the same box?
Thanks for your help!hi ,
As mentioned in the Question, I am unable to find the "Java Proxy Generattion" link in the Int builder.
Also the help doc says:
Java proxy generation is no longer supported in subsequent releases. For new developments or when making significant changes to a service interface, use Java proxy generation in SAP NetWeaver Studio instead. More information: Creating Outside-In Web Services, SAP NetWeaver Developer Studio.
Does that mean that I can no longer generate java proxy from Int builder?
regards,
Piyush -
How to generate DBMS_RANDOM Timestamp using procedure
Hi,
I got a copy from askTom site for the store procedure of creating random numbers in a table:
create or replace procedure clone( p_tname in
varchar2, p_records in number )
authid current_user
as
l_insert long;
l_rows number default 0;
begin
execute immediate 'create table clone_' || p_tname ||
' as select * from ' || p_tname ||
' where 1=0';
l_insert := 'insert into clone_' || p_tname ||
' select ';
for x in ( select data_type, data_length,
rpad( '9',data_precision,'9')/power(10,data_scale) maxval
from user_tab_columns
where table_name = 'CLONE_' || upper(p_tname)
order by column_id )
loop
if ( x.data_type in ('NUMBER', 'FLOAT' ))
then
l_insert := l_insert || 'dbms_random.value(1,' || x.maxval ||
elsif ( x.data_type = 'DATE' )
then
l_insert := l_insert ||
'sysdate+dbms_random.value+dbms_random.value(1,1000),';
else
l_insert := l_insert || 'dbms_random.string(''A'',' ||
x.data_length || '),';
end if;
end loop;
l_insert := rtrim(l_insert,',') ||
' from all_objects where rownum <= :n';
loop
execute immediate l_insert using p_records - l_rows;
l_rows := l_rows + sql%rowcount;
exit when ( l_rows >= p_records );
end loop;
end;
Can somebody tell me how to generate a random TIMESTAMP?
I try to change "sysdate" to systimestamp" and it give me an error:
ERROR at line 1:
ORA-01841: (full) year must be between -4713 and +9999, and not be 0
Please help!!
Message was edited by:
eecow
Message was edited by:
eecow
nullCan you give me an example of doing this?
The other question is:
Can the store procedure code (above) check other things other than data type?
For example:
if attributeName = 'percentage' --> create a random number from 0 to 100
The reason is because I am trying to generate some more "realistic" data. Some fields can be unrelistic, but fields like "percentage" should be within 0-100 and should not have something like 200 :)
Please advise.
Thanks! -
How to generate Serial numbers using JAVA SCRIPT
how to generate serial numbers(incrementing by 1) using JAVA SCRIPT
thanking you,
pola pradeepi am afraid that whether ur looking for this. bcoz its a simple for loop
<script language="JavaScript">
//count = limit value for u
for(i=0;i<count;++i){
alert(i);
</script>
or if ur looking for something else, pls mention ur requrment precisely
aleena -
How to generate idoc PODRCH02 using out put type
Hi All,
I need to generate outbound idoc PORDCH02 and message type PORDCH using out put types (messages).But i unable to generated this idoc using message type. System is giving error as *No recipient found for message type PORDCH in the ALE model*
To do this , i have done the following steps.
1. In BD64 i have configure the business object BUS2012, using add bapi. ( In cust.distn model it doesn't allowing the message type. so i have given BAPI )
2. In partner profile (WE20), for sending logical sytems
i have configure the message type in outbound parametes.
3. In NACE for out put type NEU i have given medium as Distribution (ALE), Partner function as LS
Could you please help me out , what are the necessary steps i need to take care and what are the steps i missed out.
Thanks and regards
PraveenIn distribution model, you have to configure both the sending system and receiving system. The Tcode of Distribution model is BD64.
-
How to generate .xsd file using jaxb generated java files
Hi,
We need to upgrade our applicatio to jdk1.6 which has jaxb2.0 class files in it. Our application has java files generated from .xsd using jaxb1.0.2 version. At present we dont have .xsd or .xml file with us.
We decide to generate .xsd file by using jaxb1.0.2 generated java files. I tried using schemagen.exe given by jdk1.6 to generate .xsd file. It error out. Is there any other way to generate .xsd file ?
pls let me know.
thanks,
ThiruObject-XML mapping is a new feature in JAXB 2.0. Classes generated with JAXB 1.0 won't generate a schema.
Generate Java classes with JAXB 2.0 xjc.
http://www.theregister.co.uk/2006/09/22/jaxb2_guide/
Maybe you are looking for
-
Problem: using Dynamic file naming in adapter
Hi Wat i m doing is using dynamic file configuration as given in this link /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 and trying to get file name and content of the file. I m getting
-
SRM, MDM, ECC integration for central contract management.
Hi there, I am questioned by a client with respect to the possibility of the following scenario - 1. There are several SAP back end systems in place. 2. SRM 7.0 will be implemented as single sourcing system. 3. The SAP back end systems carry differen
-
Changing resolution settings in OfficeJet
Hi everyone. I'm scanning a few old family pictures, size is approximately 5x3 inch. The scanned picture I get is very small, 900x600 give or take. I need to print those pictures in a photobook and this size is way too small. Is there a way to get bi
-
HT201229 Number blocking in iO7: Wild card?
I like the new number blocking, but I would like to be able to block known sources of spam calls without waiting to get called by every one. I have no reason to want calls from Pacific Telecom, for instance, so I'd like to block entire ranges like "(
-
Current condition is different than group conditon,tax not calculating
Hi, I am working on a sales order for which tax is not getting calculated.For tax calculation puprose,a third party tool,vertex is being used. When i debug,i found that the RFC function module(which calculates the tax ) is not getting called. The cod