How to get access to the local file system when running with Web Start

I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

Similar Messages

How to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

how to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

Set up the new phone as a new iPhone (without using your backup), then update it to the latest iOS (7.1.2). Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and when given the option, choose Restore from iCloud Backup and follow the prompts. This process is explained in more detail here: iCloud: Restore your iOS device from iCloud.

Qosmio G30-126 - How to get access to the bios!

I have a laptop Qosmio G30-126 and I don't know the key for entering the bios to change to properties for the HDD or any thing... so how to get access to the bios? what is the key for the bios??

Hi
Try to press the F2 button while powering the unit.
Older Toshiba notebooks supported the ESC and then F1 button
So these two options are possible

How to get access to the OCM toolkit ?

how to get access to the OCM toolkit ?
the full version not the demo !

I need to know how to do a complex query my task is to find out the names of people allergic to paracetomol and penicilllin from a list of names??? I REALLY NEED HELP ITS DUE IN TODAY!
TASK: show the Pupils: forename, Pupil surname, Year group, teacher in charge to all children allergic to penicillin and paracetmol from the table of names (not everyones allergic) How do I query it!?????????
<a href="http://www.ornsoft.com/">Custom software development</a>
<a href="http://www.aconsultancy.co.uk">Acquisition Search Warwickshire</a>

How to get access to the HTTP-Manager Tomcat ?

How to get access to the HTT-Manager Tomcat ?
Whe i do:
http://localhost:8080 - i have access to the Kablink.
How i can get access to the Tomcat Manager ??
Serg

Originally Posted by skoltogyan
How to get access to the HTT-Manager Tomcat ?
Whe i do:
http://localhost:8080 - i have access to the Kablink.
How i can get access to the Tomcat Manager ??
Serg
Hey Serg,
I don't think that's possible with the tomcat config that is supplied with Vibe.
You might get a better answer in the community space for Vibe/Kablink at vibe.novell.com, direct link being atm: https://vibe.novell.com/ssf/a/do?p_n...beonprem_url=1
Cheers,
Willem

Hyperlink to pdf on the local file system

Hello,
I'm using Oracle Reports 6i. I'm trying to set hyperlinks in my report through the pl/sql command srw.set_hyperlink to another pdf document.
When I set the hyperlink to a URL, eg, http://localhost/document.pdf#dest, it works fine, the pdf opens in IE to the destination. Now when I specify the link to a file on the local file system, eg, file:///c|/document.pdf#dest, I get a file not found within IE. If I take out the destination, it works ok, that is, it opens up the document with IE.
What am I doing wrong here? Is there a way to link a report to another pdf to a named destination within the local file system?
Thanks,
Ricky

Ricky,
This is more of IE - PDF issue I guess. Also this problem is seen more specifically for IE + File protocol + PDF
Nothing related to the Reports PDF here. You can try by just referring a PDF section through file protocal in IE and you would see the same behaviour
Thanks
Rajesh

In my utility program i get information, that the SUID file "System/Library/Core...Agent" became a change and is not to fix. What say me this and is it a problem?

in my utility program i get information, that the SUID file "System/Library/Core...Agent" became a change and is not to fix. What say me this and is it a problem?

See this
http://support.apple.com/kb/TS1448?locale=da_DK

How do get rid of the google search box when I first open Firefox?

How do get rid of the google search box when I first open Firefox?

Firefox 4 and later versions use a new build-in home page named <b>about:home</b> with a Google search bar on it.
That about:home page only shows some snippets and has a button to restore the previous session if applicable.
If you want a home page with extras then set another page as the home page like www.google.com as used in Firefox 3 versions.
*https://support.mozilla.com/kb/How+to+set+the+home+page
See also:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" "Show a blank page"

How do you turn off the auto select behavior when working with shape layers?

How do you turn off the auto select behavior when working with shape layers?
I am using either of the path selection tools to select only some of the paths on the layer. I have the proper layer targeted. I have the selection too auto select option turned off.
If another layer has a path in that area, that layer becomes auto targeted and I get the wrong path. Turning off the layer is the only way to avoid this but then I have to turn on the layer back on between making my selection and transforming to use the other layer as guide. Is there any way to stop this auto select? Locking the other layer does not stop the auto select, just prevents editing.

As far as i know the move tool options don't have any effect on the path selection tools.
You might try clicking on one of the path points or on the path itself with one of path selection tools and if you want to select multiple points
you can shift click with the Direct Selection Tool or Alt click to select the entire path.
more path shortcuts:
http://help.adobe.com/en_US/photoshop/cs/using/WSDA7A5830-33A2-4fde-AD86-AD9873DF9FB7a.htm l
http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7391a.h tml

How to get access to the partner Functions of a PO header in BADI

Hi All,
I have a scenario where I need to get access to the PO Header Partner Functions to get the Vendor number, in the PROCESS_ITEM method of BADI ME_PROCESS_PO_CUST. I could not find any method to get the partner functions. Is there any way I can get this data in my BADI implementation. I'm talking about ME21n transaction code, and the PO is not created yet, hence the PO number is not available in the BADI.
If the above is not possible, is there any other function module which I can call in the PROCESS_ITEM method of the BADI to get partner functions and their respective vendor numbers.
Any pointers would be appreciated and points awarded. Thanks for your time and help.

Hello,
Use the methods of the class: CL_PO_ITEM_HANDLE_MM, in the method: PROCESS_ITEM of the badi:
ME_PROCESS_PO_CUST, for example to access the po lines. the code is as follows:
data: it_mepoitem type mepoitem.
**Get the po lines.
it_mepoitem = im_item->get_data( ).
To look at the methods available: Go to SE24, Input the class:
CL_PO_ITEM_HANDLE_MM
Hope this helps.
PS: Award points if my answer is helpful.
Rajeev

The attached VI works when I run it initially creating the XML file, but when run after the XML file is created, it's not updated. What am I doing wrong?

The attached VI works when I run it initially creating the XML file, but when I change data and run after the XML file is created, it's not updated with new data. What am I doing wrong?
Thank you.
Solved!
Go to Solution.
Attachments:
Attractive Force XML.vi ‏23 KB

That looks like the logic which was written into the VI
Inner true/ false case:
(file exists : false) write to XML file, unflatten for display
(file exists : true) read from XML file, unflatten for display
At no time when the file exists (true case) is the XML file updated...

How to get the local file system path of an image that loaded into the image component in cq5?

Hi,
I'm having hard time uploading image from filesystem where as drag and drop works.
I'm not getting a path of image selected from filesystem.
here is my code..
private String populateImage() throws Exception {
                    if (currentNode != null && currentNode.isNode()) {
                                   Node ImageNode = JcrResourceUtil.createPath(currentNode, "image",
                                                                      null, "nt:unstructured", true);
                                   imageUrl = ImageNode.hasProperty("fileReference") ? ImageNode.getProperty("fileReference").getValue().getString() : "";
       imageUrl = imageUrl.trim();
        log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE IF IS: " + imageUrl);
                    } else {
                                        imageUrl = properties.get("fileReference", "");
                                        imageUrl = imageUrl.trim();
                                        log.info("MANAGE PROFILE BEAN IMAGE URL INSIDE ELSE IS: " + imageUrl);
                    return imageUrl;
So if I drag and drop..
ImageNode.hasProperty("fileReference") is returning a valid path
but if I upload an image it is returning Null.
So how to get the path? any suggestions around would be appreciated...

When you say path you mean you want the path to print out in your HTML? Is that accurate? If so you generally need to constructe that path based on the path to the current component. So if you component is located at /content/mysite/en/about/mypage/jcr:content/parsys/image then the path to the image would generally be something like /content/mysite/en/about/mypage/jcr:content/parsys/image.img.jpg/1283829292873.jpg. The .img. selector triggers the servlet associated with the foundation parbase - /libs/foundation/components/parbase/img.GET.java. The reason you reference it this way is that there is no filesystem path to the image - it is stored in the repository not on the file system, and it requires a servlet or script to ge the binary from the repository and steam it.
Normally the way you'd construct this is to use the out of the box Image class - so look at /libs/foundation/components/image/image.jsp. Now this example assumes that your component where you loaded the image extends /libs/foundation/components/parbase. If it doesn't then you either have to change your sling:superResourceType to /libs/foundation/components/parbase or some other component that does exten /libs/foundation/components/parbase.

Once Original Checked in, how it gets deleted from the Local PC automatical

Hi Experts,
Can someone help me regrding the following requirement:
When the Originals are checked in into the content server, then the file should be deleted automatically from the Local PC. i.e. When we check in the original in the content serve, the same file which is there on the Local PC should gets deleted automatically.
Is there a way to do it ?
Thanks in advance.....

Hi,
Yes.. There is a way.. Go to dc30 - Workstation Application, Select one, for example PDF - Double click - Now you can see.. Check Delete Files after check-in.
Regards,
Aby

Sharing the local file system on another machine

Version : 5.10
We have an HP Proliant machine and a SunFire V40 machine. Both installed with solaris 5.10 (x86 AMD).
In HP proliant machine we have filesystem with 600gb . We would like to mount this file system in the SunFire V40 machine . Is this possible? If yes, could you guys point me an URL where steps are mentioned to do this.

Hope this is how one determines Filesystem type (got this from googling)Nope. There are several ways to determine the filesystem currently being used:
$ mount | grep filesystem (where 'filesystem' is all or part of the mount point)
/etc/vfstab will normally tell you (so long as it's not zfs)
$ fstyp {mountpoint}
sun.com links i get by Googling are taking me Oracle documentation homepage !We moved from docs.sun.com to the Oracle Documentation site last week and not all links have been updated. It's work in progress at this time. The Solaris 10 documentation can be found here - http://download.oracle.com/docs/cd/E19253-01/index.html
And this is the link to the start of the NFS section - http://download.oracle.com/docs/cd/E19253-01/816-4555/rfsintro-2/index.html
I wouldn't worry too much about getting the systems to auto-mount at boot until you've tested it manually. I'll assume this is a UFS/VxFS filesystem (ZFS requires a slightly different approach). If everything works, you can use the dfstab on the server and the vfstab on the client to automatically share and mount the filesystem so it persists across reboots.
You'll need to do something like this as a test:
On the HP System (the NFS Server) you'll need to enable the NFS Server SMF Service:
server> $ svcadm enable svc:/network/nfs/server:default
On the client enable the NFS Client SMF Service:
client> $ svcadm enable svc:/network/nfs/client:default
Back on the NFS Server you now need to share out the /foobar filesystem:
server> $ share -F nfs -o rw /foobar
Check the share using dfshares or mount
server> $ dfshares
server> $ mount
On the client you can then mount the filesystem:
client> $ mount -F nfs -o rw nfsserver:/foobar /foobar2
The above is saying mount the exported /foobar filesystem residing on 'nfsserver' host to a local mountpoint of /foobar2 on this client.
As a test you can also use the Automounter by simply cd'ing to the exported filesystem:
client> $ cd /net/nfsserver/foobar
Hopefully after reading the documentation you should get a working setup.
Regards,
Steve

How to get index of the item from table when user double click on an item

Can anyone tell me how to get the corresponding index of a table in which
elements are listed as array of strings? I am looking for the index of the
item being double-clicked on?
Thank you in advance
Cheers,
NQ.

Hi NQ,
Although the question is not thouroughly clear, I can give a few suggestions. You can use the property node for table to refer to any particular row or column of the table. The correpsonding elements in the property node will be "SelStart", "SelSize" etc. Just as a side thought, the index of a table starts with (0,0).
I am attaching a test file. Please see if it helps you in figuring out what exactly you want. This example VI is just to help you try different options under property node (if you havent already tried)to get what you want.
Regards,
Sastry Vadlamani
Applications Engineer
National Instruments
Attachments:
test.vi ‏27 KB

How to get access to the local file system when running with Web Start

Similar Messages

Maybe you are looking for