Qosmio G30-126 - How to get access to the bios!

I have a laptop Qosmio G30-126 and I don't know the key for entering the bios to change to properties for the HDD or any thing... so how to get access to the bios? what is the key for the bios??

Hi
Try to press the F2 button while powering the unit.
Older Toshiba notebooks supported the ESC and then F1 button
So these two options are possible

Similar Messages

How to get access to the OCM toolkit ?

how to get access to the OCM toolkit ?
the full version not the demo !

I need to know how to do a complex query my task is to find out the names of people allergic to paracetomol and penicilllin from a list of names??? I REALLY NEED HELP ITS DUE IN TODAY!
TASK: show the Pupils: forename, Pupil surname, Year group, teacher in charge to all children allergic to penicillin and paracetmol from the table of names (not everyones allergic) How do I query it!?????????
<a href="http://www.ornsoft.com/">Custom software development</a>
<a href="http://www.aconsultancy.co.uk">Acquisition Search Warwickshire</a>

How to get access to the HTTP-Manager Tomcat ?

How to get access to the HTT-Manager Tomcat ?
Whe i do:
http://localhost:8080 - i have access to the Kablink.
How i can get access to the Tomcat Manager ??
Serg

Originally Posted by skoltogyan
How to get access to the HTT-Manager Tomcat ?
Whe i do:
http://localhost:8080 - i have access to the Kablink.
How i can get access to the Tomcat Manager ??
Serg
Hey Serg,
I don't think that's possible with the tomcat config that is supplied with Vibe.
You might get a better answer in the community space for Vibe/Kablink at vibe.novell.com, direct link being atm: https://vibe.novell.com/ssf/a/do?p_n...beonprem_url=1
Cheers,
Willem

Qosmio G30-126: how to connect analog TV and satellite TV simultaneously

Hi, I have a Qosmio G30-126 and have a problem with simultaneous receiving analog TV (by TV-in port in built-in TV tuner) and satellite channels from satellite set-top-box (by AV-in ports).
I can programm Windows Media Center for analog TV (but without satellite STB) by antenna TV-in port and it works perfectly.
I can programm Windows Media Center for digital channels from satellite STB (but without analog TV) by AV-in ports and it works perfectly.
But i can't program Windows Media Center for both analog TV i satellite STB, because during programming WMC forces me to choose between analog TV or satellite decoder and doesn't allow me to choose two signal sources.
For me it is a big problem, because I have cable TV (analog) and satellite STB with digital channels. And I want to watch on my Qosmio all channels.
Could anyone help me?

>... because during programming WMC forces me to choose between analog TV or satellite decoder and doesn't allow me to choose two signal sources.
I think in this statement you answered your question. I had Qosmio G30 long time ago and i also know that WMC cannot handle with two signal sources at the same time.
To confirm this contact Microsoft and ask them. I mean they have designed WMC and know how it works exactly.
Toshiba has just offered proper hardware (TV tuner) to offer TV option on this notebook.

How to get access to the partner Functions of a PO header in BADI

Hi All,
I have a scenario where I need to get access to the PO Header Partner Functions to get the Vendor number, in the PROCESS_ITEM method of BADI ME_PROCESS_PO_CUST. I could not find any method to get the partner functions. Is there any way I can get this data in my BADI implementation. I'm talking about ME21n transaction code, and the PO is not created yet, hence the PO number is not available in the BADI.
If the above is not possible, is there any other function module which I can call in the PROCESS_ITEM method of the BADI to get partner functions and their respective vendor numbers.
Any pointers would be appreciated and points awarded. Thanks for your time and help.

Hello,
Use the methods of the class: CL_PO_ITEM_HANDLE_MM, in the method: PROCESS_ITEM of the badi:
ME_PROCESS_PO_CUST, for example to access the po lines. the code is as follows:
data: it_mepoitem type mepoitem.
**Get the po lines.
it_mepoitem = im_item->get_data( ).
To look at the methods available: Go to SE24, Input the class:
CL_PO_ITEM_HANDLE_MM
Hope this helps.
PS: Award points if my answer is helpful.
Rajeev

How to get access to the local file system when running with Web Start

I'm trying to create a JavaFX app that reads and writes image files to the local file system. Unfortunately, when I run it using the JNLP file that NetBeans generates, I get access permission errors when I try to create an Image object from a .png file.
Is there any way to make this work in Netbeans? I assume I need to sign the jar or something? I tried turning "Enable Web Start" on in the application settings, and "self-sign by generated key", but that made it so the app wouldn't launch at all using the JNLP file.

Same as usual as with any other web start app : sign the app or modify the policies of the local JRE. Better sign the app with a temp certificate.
As for the 2nd error (signed app does not launch), I have no idea as I haven't tried using JWS with FX 2.0 yet. Try to activate console and loggin in Java's control panel options (in W7, JWS logs are in c:\users\<userid>\appdata\LocalLow\Sun\Java\Deployment\log) and see if anything appear here.
Anyway JWS errors are notoriously not easy to figure out and the whole technology in itself is temperamental. Find the tool named JaNeLA on the web it will help you analyze syntax error in your JNLP (though it is not aware of the new syntax introduced for FX 2.0 and may produce lots of errors on those) and head to the JWS forum (Java Web Start & JNLP Andrew Thompson who dwells over there is the author of JaNeLA).

How to get access to the internal speakers?

Since updating my Macbook with the last security patch the audio prefpane lost the internal speakers. Nevertheless they are working: the sound while booting comes.
I've just reseted the parameter ram, cleared caches, rebuild the access structure.
And now?

I've had a similar problem on my G5 Desktop, but I don't think it was internal speakers, just the usb headset/iMic adaptor that was lost. Disconnecting and reconnecting always fixed it.
I'm guessing a restart didn't fix it, either?
I tried to find a plist that might control it, and all I found was /Library/Preferences/com.apple.audio.DeviceSettings.plist
I'm not certain this will do anything, but you could try moving it out of the /Library/Preferences folder.
I don't know if a restart, logout/in, or just opening the Sound prefs will be needed. If it doesn't fix anything, you can always move it back.

Qosmio G30-126 - Strange scratching noise

Hi!
I have a Qosmio G30-126 and OS Vista Ultimate. about a month ago my laptop was taken to service because it wouldn't turn on, but since last week, when I started it up there was a prolonged scratching noise on the startup, and since then whenever Im listening to music or if the laptop's on standby, there are some very weird scratching sounds coming out from the speakers. Short sounds that keep being repeated. Sometimes they stop after a few times, and other times, like last night, I had to restart.
I tried updating all available drives, but everything seemed up-to-date. I also googled the issue, but none of what I found was relative.
Can someone give me a clue as to what the issue might be? Is there something I haven't thought of that needs to be done?
Thanks a lot in advance!

That might be an option...how can i see if it is the fan though? Is there a way to do it on my own?
Is it possible that these sound issues might be because of overusage? I don't keep my laptop on 24 hrs a day, but some days it's on till the evening. But only after the service did this whole thing occur..

Qosmio G30-126 monitor become black and FN buttons don't work

Hello,
I have small problem, ehm two problems but perhaps small for you :)
Last week I install Vista ultimate WITHOUT RECOVERY CD..
It's OK, but I'm closing cover of notebook and instantly open, monitor become black and i can't anything do beyond restart .
In Control panel in possibilities of power supply , bookmark "options for closing pad" doesn't work.
Maybe it is by, because i don't driver if exist
And second problem maybe related with first but this is mistake by it, because I wasn't discover drivers because i don't hidden toolbar on up on dispay in Windows, where is standartly is.
I don't work major part hidden functions under key FN ( I think FN + F2,F3...F12) plus keys be the side POWER without multimedia keys on music..
Thx for help !!!
Sry for my bad english
Message was edited by: Martiosso

Hi Martin
First of all its interesting if you have downloaded and installed all Toshiba Vista drivers which are released on the Toshiba European driver page?
All drivers must be installed in the right order!
If I'm not mistaken the Qosmio G30-126 belongs to the PQG32E series. It was delivered with HD DVD drive and therefore you should choose the drivers for Qosmio G30 HD DVD (PQG32E)!!!
Please check firstly the Installation Instructions txt file and then install all drivers like mentioned in this document.
Regarding the display issue;
You should install the right NVIDIA driver from the Toshiba page!!
The FN keys and control buttons dont work because the Toshiba Vista Value Added Package was not installed. This package contains different applications which are necessary to get all Toshiba functions running!
Good luck

How to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

how to get access to my iCloud back up when setting up a new iPhone 5s which needs the newest version of iOS7 first?

Set up the new phone as a new iPhone (without using your backup), then update it to the latest iOS (7.1.2). Then go to Settings>General>Reset, tap Erase All Content and Settings, go through the setup screens again and when given the option, choose Restore from iCloud Backup and follow the prompts. This process is explained in more detail here: iCloud: Restore your iOS device from iCloud.

I loos my APPLE ID, I have a new one, how can get access to data stored in the old one?

I loos my APPLE ID, Now I have a new one, how can get access to data stored in the old one?

Do you have the email & password of the old Apple ID?

Qosmio G30-126 - Win7 or Vista instaltion hdd not showing

Hello everyone,
i have one system Qosmio g30-126.
I dont have the recovery cds.
I want to instal the Win7 or Win Vista.
He is not showing me the both 200+200 HDD.
plz telling to me what i do.

Hi mate
I think you dont need a SATA driver but RAID driver!
As far as I know the Qosmio G30 supports RAID and therefore you need to include the RAID driver.
Visit the Toshiba European driver page and download the RAID driver which is listed in the list.
Note: Choose the Archive in Product Type because G30 is an older series.
After you have downloaded and uzipped the driver, you will have to add this driver during the Windows installation setup.

Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening?

Photostream Issue - I have had several phones over the years all backing up via iCloud/Photostream. It seems that the oldest of my photos and videos are simply gone and I cannot seem to figure out how to get access to them. Why is this happening? Is there anything I can do to get them back? I'm freaked out by the thought that I am paying for what I thought was a safe place for my photos to be stored and accessed later but now see that there are nearly 500 pictures/videos gone from my photostream folder. Any help would be greatly appreciated. Thank you. - Michael

Hi newmarket,
Photo Stream is not a respository for archiving photos. It is a cloud storage device that will store the last month or last 1000 photos taken by any device on the same Apple ID, and then will "share" those photos with all other devices that have Photo Stream turned on,and that are logged onto the same Apple ID.
iCloud backups will contain all of the photos that were on your camera roll the last time you backed up your device.
If you have photos outside of the Photo Stream parameters, and they are not all on your current camera roll, then you have no way to retrieve them unless you have imported them to the computer you sync with or have uploaded them to some other cloud service like DropBox.
Sorry,
GB

How do I get access to the parent window native pointer?

Under Windows:
I need to get access to the native pointer for an applications frame (in this case a JFrame).
I need to do this because I want to display property pages in a native dialog box. These property pages are supplied by driver software, are themselves native, and require a valid CWnd handle in order to become active and therefore visible.
Hence I need access to the native peer. Is there a way to do this?

ok andrew, when i compile the given code i receive the following errors:
hwndex.java:19: cannot resolve symbol
symbol : class DrawingSurfaceInfo
location: class HwndEx
      DrawingSurfaceInfo drawingSurfaceInfo =
      ^
hwndex.java:20: cannot resolve symbol
symbol : class DrawingSurface
location: class HwndEx
         ((DrawingSurface) comp.getPeer()).getDrawingSurfaceInfo();
           ^
hwndex.java:20: warning: getPeer() in java.awt.Component has been deprecated
         ((DrawingSurface) comp.getPeer()).getDrawingSurfaceInfo();
                               ^
hwndex.java:24: cannot resolve symbol
symbol : class Win32DrawingSurface
location: class HwndEx
         Win32DrawingSurface win32DrawingSurface =
         ^
hwndex.java:25: cannot resolve symbol
symbol : class Win32DrawingSurface
location: class HwndEx
               (Win32DrawingSurface) drawingSurfaceInfo.getSurface();
                ^
4 errors
1 warningand i consulted the document for "getPeer()" and there it is said that "getPeer()" method has been deprecated since JDK 1.1 so how can one use the above code. please give the code in more appropriate way.

How to get access to my contact list?

I have successfully (?) installed Skype on my Galaxy tablet and logged in using my account name from my laptop version. But I cannot find my contact list. How to get access to that! Even my photo is present!

Hello Everyone, I'm trying to access my Skype contact list on my Galaxy S3 so that I can edit it, but I do not seem to be able to. I've gone to the help page to try and find out where it is, but the steps say to tap the three dots in the upper right corner for "More"...but I do not have that emblem?!?! Has this issue been resolved, or are people still unable to access their contacts?

Qosmio G30-126 - How to get access to the bios!

Similar Messages

Maybe you are looking for