How to get index of the item from table when user double click on an item

Can anyone tell me how to get the corresponding index of a table in which
elements are listed as array of strings? I am looking for the index of the
item being double-clicked on?
Thank you in advance
Cheers,
NQ.

Hi NQ,
Although the question is not thouroughly clear, I can give a few suggestions. You can use the property node for table to refer to any particular row or column of the table. The correpsonding elements in the property node will be "SelStart", "SelSize" etc. Just as a side thought, the index of a table starts with (0,0).
I am attaching a test file. Please see if it helps you in figuring out what exactly you want. This example VI is just to help you try different options under property node (if you havent already tried)to get what you want.
Regards,
Sastry Vadlamani
Applications Engineer
National Instruments
Attachments:
test.vi ‏27 KB

Similar Messages

How to get rid of the other from the MacBook Air Memory?

How to get rid of the other from the MacBook Air Memory? I reviewed my newly purchased MBA ear;y 2014 i7 8GB RAM and there was 24+ GB of "Other". I have Yosemite. I have restored to factory with no luck. is there a memory cleaner or process to eliminate what is not needed in Other? I know some files there are settings, and such but not 24+ GB worth is such of stuff.

About “Other”:
http://support.apple.com/en-us/HT202867
Go step by step and test.
1. Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
2. Backup your computer.
3. Empty Trash.
   http://support.apple.com/kb/PH13806
4. Disk space / Time Machine ?/ Local Snapshots
Local backups
   http://support.apple.com/kb/ht4878
5. Delete old iOS Devices Backup.
    iTunes > Preferences > Devices
    Highlight the old Backups , press “Delete Backup” and then “OK”.
    http://support.apple.com/kb/HT4946?viewlocale=en_US&locale=en_US
6. Re-index Macintosh HD.
    This will take a while. Wait until it is finished.
    System Preferences > Spotlight > Privacy
    http://support.apple.com/kb/ht2409
7.Try OmniDiskSweeper. This will give the storage size details of the items.
   https://www.omnigroup.com/more
   Select Macintosh HD and click “Sweep Selected Drive” at the bottom.
   Be careful. Delete only the files that can be safely deleted. If you are not sure about any file, don’t touch it.
8. Move iTunes, iPhoto and iMovie media folders to an external drive.
    iTunes
    http://support.apple.com/en-us/HT201562
    iPhoto
    http://support.apple.com/kb/PH2506
    iMovie
    http://support.apple.com/kb/ph2289

How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP server

In 9iAS 9.0.2 Oracle HTTP Server (OHS) is pre-configured to assign requests to the Home OC4J instance via the URL-prefix "/j2ee"/
For example, the TEST servlet under OC4J would be passed through OHS using:
http://urmachine:urApachePort/j2ee/TEST
whereas in the standlone OC4J version, this URL works:
http://urmachine:urOC4JPort/TEST
How to get rid of /j2ee prefix from URL when I use the OC4J via Oracle HTTP Server?

It is getting the url prefix from mod_oc4j.conf
under /ora9ias/Apache/Apache/conf
You can read more on this at
http://otn.oracle.com/docs/products/ias/doc_library/90200doc_otn/web.902/a92173/confmods.htm#1008977
-Prasad

When i double click on and item in the firefox downloads window the item dosn't open, left clicking on the item still dose not give me the choice to "open". how to fix this problem thanks

When i double click on an item in the firefox dowloads window the item dos'nt open.Left clicking on the item dose not give me the choice to "open" the item.
the downloaded item is a pdf file of 59 kb, and was downloaded using adobe acrobat version 5

I have sort of the exact same problem. Extremely far away from user friendly
I have an second issue as well: When I hook off all-day it comes up with an 8 hour event!
And then if I put in a late start hour it pushes end time to next day due to the 8 hour event suggestion.
All in all this gives a lot of changes just to enter an event.
Command N
I learnt from your input to use this fuction. At least that comes up with a one hour event as default.

How do get rid of the google search box when I first open Firefox?

How do get rid of the google search box when I first open Firefox?

Firefox 4 and later versions use a new build-in home page named <b>about:home</b> with a Google search bar on it.
That about:home page only shows some snippets and has a button to restore the previous session if applicable.
If you want a home page with extras then set another page as the home page like www.google.com as used in Firefox 3 versions.
*https://support.mozilla.com/kb/How+to+set+the+home+page
See also:
*Tools > Options > General > Startup: "When Firefox Starts": "Show my home page" "Show a blank page"

I have both photoshop 6 and Photoshop CC on my Mac. How can I make Photoshop CC the default to open when I double click on an image?

I have both photoshop 6 and Photoshop CC on my Mac. How can I make Photoshop CC the default to open when I double click on an image?

Right-click an image file,
Get info,
Open with: <choose Photoshop CC>
Change File Associations in OS X Mavericks - YouTube

Basic List:- Need to get data when user double click on report output

Hi,
My requirement is to display asset details as a report and when user double clicks on the asset details, transaction AS03 need to be opened.
The output layout is as follows:
Company code    800                             Asset class 111
Asset 1 ................
Asset 2.................
Asset 3.................
Company code    900                             Asset class 111
Asset 1 ................
Asset 2.................
Asset 3.................
when user double click on Asset 1 of Company code 800, then transaction AS03 need to be triggerd. But when I use ATLine selection. I only get the Asset1....details in the sy-lisel. But I need Company code for triggering the AS03 transaction.
Please let me know any way of getting company code along with the Asset 1 ......
Regards
Suresh Kumar

Hi,
Herewith i am sending the sample coding for the report.
REPORT YMS_INTERTESTALV .
TYPE-POOLS: slis.
DATA: BEGIN OF itab1 OCCURS 0,
vbeln TYPE vbeln,
bstnk TYPE vbak-bstnk,
erdat TYPE vbak-erdat,
kunnr TYPE vbak-kunnr,
END OF itab1.
DATA: BEGIN OF itab2 OCCURS 0,
vbeln TYPE vbeln,
matnr TYPE vbap-matnr,
netpr TYPE vbap-netpr,
kwmeng TYPE vbap-kwmeng,
END OF itab2.
DATA: t_fieldcatalog1 TYPE slis_t_fieldcat_alv.
DATA: t_fieldcatalog2 TYPE slis_t_fieldcat_alv.
DATA: v_repid TYPE syrepid.
v_repid = sy-repid.
Get the fieldcatalog1
PERFORM get_fieldcat1.
Get the fieldcatalog2
PERFORM get_fieldcat2.
SELECT vbeln bstnk erdat kunnr UP TO 10 ROWS
INTO TABLE itab1
FROM vbak.
IF NOT itab1[] IS INITIAL.
SELECT vbeln matnr netpr kwmeng
INTO TABLE itab2
FROM vbap
FOR ALL ENTRIES IN itab1
WHERE vbeln = itab1-vbeln.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
     EXPORTING
          i_callback_program      = v_repid
          i_callback_user_command = 'DISPLAY_DETAIL'
          it_fieldcat             = t_fieldcatalog1
     TABLES
          t_outtab                = itab1.
FORM display_detail *
--> UCOMM *
--> SELFIELD *
FORM display_detail USING ucomm LIKE sy-ucomm
selfield TYPE slis_selfield.
DATA: itab2_temp LIKE itab2 OCCURS 0 WITH HEADER LINE.
IF ucomm = '&IC1'.
    READ TABLE itab1 INDEX selfield-tabindex.
    IF sy-subrc = 0.
      LOOP AT itab2 WHERE vbeln = itab1-vbeln.
        MOVE itab2 TO itab2_temp.
        APPEND itab2_temp.
      ENDLOOP.
      CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
           EXPORTING
                i_callback_program = v_repid
                it_fieldcat        = t_fieldcatalog2
           TABLES
                t_outtab           = itab2_temp.
    ENDIF.
ENDIF.
ENDFORM.
FORM GET_FIELDCAT1 *
FORM get_fieldcat1.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB1'.
s_fieldcatalog-rollname = 'VBELN'.
s_fieldcatalog-hotspot = 'X'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'BSTNK'.
s_fieldcatalog-tabname = 'ITAB1'.
s_fieldcatalog-rollname = 'BSTNK'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'ERDAT'.
s_fieldcatalog-tabname = 'ITAB1'.
s_fieldcatalog-rollname = 'ERDAT'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KUNNR'.
s_fieldcatalog-tabname = 'ITAB1'.
s_fieldcatalog-rollname = 'KUNNR'.
APPEND s_fieldcatalog TO t_fieldcatalog1.
CLEAR s_fieldcatalog.
ENDFORM.
FORM GET_FIELDCAT2 *
FORM get_fieldcat2.
DATA: s_fieldcatalog TYPE slis_fieldcat_alv.
s_fieldcatalog-col_pos = '1'.
s_fieldcatalog-fieldname = 'VBELN'.
s_fieldcatalog-tabname = 'ITAB2'.
s_fieldcatalog-rollname = 'VBELN'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '2'.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'ITAB2'.
s_fieldcatalog-rollname = 'MATNR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '3'.
s_fieldcatalog-fieldname = 'NETPR'.
s_fieldcatalog-tabname = 'ITAB2'.
s_fieldcatalog-rollname = 'NETPR'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
s_fieldcatalog-col_pos = '4'.
s_fieldcatalog-fieldname = 'KWMENG'.
s_fieldcatalog-tabname = 'ITAB2'.
s_fieldcatalog-rollname = 'KWMENG'.
APPEND s_fieldcatalog TO t_fieldcatalog2.
CLEAR s_fieldcatalog.
ENDFORM.
Thanks,
Shankar

My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?

My computer had to be shut down this morning when I could move my mouse around but it would not respond when I double clicked on an item to select. Now I cannot open a file in my finder window by double clicking on it. Any suggestions?

Did you reinstall CS3 after CC?
For that matter, doing an in-place upgrade on the OS is always a gamble with Adobe programs. Reinstalling all the versions you need, in order, would probably solve your problem.
And you shouldn't need to save as IDML after opening the .inx in CC.

I have a 4s with ios7, the Flixter app appears when I double click the home button but has disappeared from the main screen page. How do I get it back?

The app appears when I double click the homw button but has disappeared from the main screen. How do I get it back on the screen so that I don't have to double click every time?

The app appears when I double click the homw button but has disappeared from the main screen. How do I get it back on the screen so that I don't have to double click every time?

Why did folk category get removed from radio when I double clicked on it?

When I double clicked on 'folk' category it disapeared. How do I get it back?

So your problem is that the video won't play at all. This is probably because Sony has tweaked the 'codec' used to to compress the video. Usually camcorders come with software that can play the clip.
So:
Tell us what Sony camcorder you used.
Install the software that came with your camcorder and see if that can show the footage.
As requested tell us the exact error message you are receiving.
Run the clip through 'GSpot' and post a screen capture here.
Cheers,
Neale
Insanity is hereditary, you get it from your children

How do I stop 'recents' appearing on my screen when I double click?

A New IO8 feature has appeared on my email screen when I double click, a list of " recent" contacts, allegedly, from my iPhone. I do not want these to appear on my iPad. I have switched off notifications from i message but they still appear. Note this of course happens when the iPad is functionning normally which is rarely now as it is either frozen, or just thinking, or not responding at all....all after the upgrade to IO 8.

Just found the answer: settings, mail , contact switcher, off.

How to get name of the month from current date.

Hi,
How to get the name of the month from current date.
Thanks,
Senthil

Sethil,
Use your date(let us say Date1) instead of sy-datum.
CALL FUNCTION 'MONTH_NAMES_GET'
EXPORTING
LANGUAGE = SY-LANGU
IMPORTING
RETURN_CODE =
TABLES
MONTH_NAMES = itab_month
EXCEPTIONS
MONTH_NAMES_NOT_FOUND = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE itab_month
WITH KEY MNR = date1+4(2).
itab_month-LTX will contain the value you are looking for
Good luck
Raghava

HT1338 How do you get help over the phone from AppleCare when in Manila Philippines?

I am trying to contact someone in apple care for help. The phone number listed in Manila Philippines doesn't appear to be correct. Anyone know how to get the help I have paid for?

Contact the Apple Store for the number.

How to get only current exception message from tables

Hi
In my sceanario , I want to have the list of Current MRP exception messages list from table
I understand that MRP detailed lists, including all exception messages, are stored in transparent table MDKP and cluster table MDTC.
I can tell ABAPer to write a report for me , to read the data from these tables , but I guess these tables contain old exception message also , which are not currently appearing in MRP list
How to get only current exception message
Rgds,
sandeep

Sandeep,
MDTC contains only data from the most recent MRP run. So, all messages you see are those which are currently valid.
The messages might have first appeared during a previous run, but they still need to be addressed.
Before you invest a lot of time and effort into writing and debugging a custom report, you should probably try to use the standard SAP functionality found in MD06. On the Processing indicator tab, you can select "Only with new exceptions". Here you can tag a material/plant as 'processed', and thereafter, the exceptions that existed there before you tagged the part will not be re-displayed.
Best Regards,
DB49

How to get SYSDATE in the header section dynamically when we run the report

I have one more issue may i know how can i get the sysdate in the header section when i run the report.
as we have the requirement like this
In the header section
Run Date : ("sysdate").
How to get the sysdate dynamically in the RTF template, when i go across the google i found that header and footer section did not allow form fiields .
So is there any way to do it.
Thanks in Advance.
Have a Nice Day.

You cannot insert form fields in the Header section, but you can just insert the code to achieve this. For example: insert this in the header section to view the sysdate: You could format the date as you would like..
<?xdoxslt: sysdate(‘YYYY-MM-DD’)?>
Since you are new to BI publisher, search the forum, review the Report Designer's guide for BI publisher. You will find that most of your basic questions are answered there and there are examples as well.
Thanks!

How to get index of the item from table when user double click on an item

Similar Messages

Maybe you are looking for