How to get active programs/custom ABAP developments for past 6 months?

All,
Is there any transaction/table/program/FM to get active programs for past 6 months?
Intention here is to get actively used custom ABAP developments.
Regards,
Sree

Hi Sree,
I usually look up the activity in transaction ST03N (Workload analysis). In most systems the standard activity statistics are available for up to three months. You can extend the period of course, see this [thread|ST03N Data; for further details.
Once in the transaction, switch to expert mode. Under Workload node, expand 'Total'. Double click on the desired range you want to analyze. Switch to 'User Data' tab in the right window and in the lower left pane under 'Analysis View', double click 'Transaction Profile'.
The # of steps roughly estimates how many times a particular transaction has been executed.
Best regards,
Asim

Similar Messages

How to get a live customer service rep for Itunes?

I need tech support by phone

There is no phone support.
Click Support at the top of this page, then click the link under Contact Us.
The people who respond to e-mail and express lane are alive.

How to call java program from ABAP

Hi Experts,
My requirement is to call java programs from ABAP. For that i have set up SAP JCO connection by using this link http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/739. [original link is broken] [original link is broken] [original link is broken] Connection gets sucessfully. After this how to call java program from ABAP as per our requirement. Please help me out.
Also i tried this way also.. but while executing the DOS Command line appear & disappear in few seconds. So couldnt see the JAVA output. Please help me out to call java programs in ABAP..
DATA:command TYPE string VALUE 'D:Javajdk1.6.0_20 injavac',
parameter TYPE string VALUE 'D:java MyFirstProgram'.
CALL METHOD cl_gui_frontend_services=>execute
EXPORTING
application = command
parameter = parameter
OPERATION = 'OPEN'
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
bad_parameter = 3
file_not_found = 4
path_not_found = 5
file_extension_unknown = 6
error_execute_failed = 7
OTHERS = 8.
Thanks.

This depends on the version of your Netweaver Java AS. If you are running 7.0, you will have to use the Jco framework. The Jco framework is deprecated since 7.1 though. If you want to build a RFC server in 7.1 or higher, it is adviced that you set it up through JRA.
Implement an RFC server in 7.0:
http://help.sap.com/saphelp_nw04/helpdata/en/6a/82343ecc7f892ee10000000a114084/frameset.htm
Implement an RFC server in 7.1 or higher:
http://help.sap.com/saphelp_nwce72/helpdata/en/43/fd063b1f497063e10000000a1553f6/frameset.htm

How to get Active users list in Essbase 6.5.6

Hi Gurus,
How to get Active users list in Essbase 6.5.6 version
I dont find any Esscmd to find active users list....
i used LISTLOGINS command in ESSCMD but its not helping me out....
pls suggest me some approach to find active users list.
Thanks in advance....

Hi ,
Display sessions will give only active users details which are currently connected to the ESSBASE .
if you need this list ? or you need the total list of security active users list ?
if you need the currently connected to the ESSBASE
if you check one server At a time or you can check the application level also
1)server level
display session all;
2)application level
display session on application 'application name ';
go for the run command ---> essmsh-----> login;----->enter user name ----> enter password----->enter host (like server name ) then you need to you above 1 &2 commands
Thanks,
suresh

How to get Messageid in Inbound ABAP Proxy ?

Hi,
Please advise how to get messageid in Inbound ABAP Proxy, so far i could not find anythings most of the forum discuss about "How to get messageid for Outbound Proxy).
Thank You and Best Regards
FL

Hi Fernad,
By using below code you can take message id.
java.util.Map map = container.getTransformationParameters();
return ((String) map.get(StreamTransformationConstants.MESSAGE_ID));
Create one simple UDF by using above code and map this to one field (you may create one dummy field for this). Then at runtime the mapped field contains the message id.
Regards,
Venkata Ramesh

How to get username from customer email id.

Hi experts,
How to get username from customer email id.I am using transaction XD02.
I would be thankful for your kind replies .
Regards,
Sachin Hada

Hi sachin,
Re: Email id field
Regards,
Sravanthi

How to get CS6 program icons to display?

How to get CS6 program icons to display?

This is the error message I get
Exit Code: 6
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 2 error(s)
----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} -----------
ERROR: Third party payload installer vcredist_x86.exe failed with exit code: -2147024546
ERROR: Failed to install Microsoft Visual C++ 2012 Redistributable Package (x86). Please try installing it by double clicking on the executable at "C:\Users\Antia\AppData\Local\Temp\{7976D5C1-6469-483B-B4CB-179D91E4C7E0}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x86)\vcredist_x86.exe", or download and install the latest Microsoft Visual C++ 2012 Redistributable Package (x86) from Microsoft website - www.microsoft.com

How to get the program where the User exit is use

Hi,
Could anyone let me know how to get the program which is using the user exit
EXIT_SAPLFMR4_002 .
Thank you.
Donny~

You can do a where used on the functino module EXIT_SAPLFMR4_002 in SE37.
In this case, you user exit is called from a function module FMRE_FI_BELEG_CHECK. Which in my system, doesn't appear to be called directly. It could be called dynamically.
Regards,
RichHeilman

How to get standard program ,script,smartforms all from sap

hi friends
how to get standard program ,script,smartforms all from sap.
thanks&regards
Babasish

Hi,
reports:
goto se38
all programs not starting with y or z will be sap std programs only
same for se71 scripts
samse for smartforms
but the use of those will be known when you see the documentation
for each programme
for std programs there will be documentation available so that you can understand
why they have developed that object
thanks & regards,
Venkatesh

How to get Capacity And Custom Attribute Data Through Powershell

how to get Capacity And Custom Attribute Data Through Powershell

Hi Nitesh,
Great command from Martin.
Also find a article to configure the Quota:
http://technet.microsoft.com/en-us/library/aa998353(v=exchg.141).aspx
Thanks
Mavis Huang
TechNet Community Support

How to get the data from pcl2 cluster for TCRT table.

Hi frndz,
How to get the data from pcl2 cluster for tcrt table for us payroll.
Thanks in advance.
Harisumanth.Ch

PL take a look at the sample Program EXAMPLE_PNP_GET_PAYROLL in your system. There are numerous other ways to read payroll results.. Pl use the search forum option & you sure will get a lot of hits..
~Suresh

I accidentally deleted my iMovie off my mac, anyone know how to get it back because it came for free and is now 15 dollars to buy back??? pls help

i accidentally deleted my iMovie off my mac, anyone know how to get it back because it came for free and is now 15 dollars to buy back??? pls help

If you mean you accidentally removed the icon for iMovie from the Dock (the array of icons at the bottom of the window), you can add it back easily.
Open the Applications folder (if you open it from the Dock you may then need to click the Open in Finder icon), locate the iMovie program.
Drag the icon for iMovie down to the Dock, somewhere between the icon for Finder and the dashed line toward the right.
Wait for the icons at that spot to move aside, then drop it in.

How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "?

Hello SAP Guru's,
How to get / configure data in Tcode "MCTG" for "SIS: Sales Office Analysis Selection "? We have implemented SAP ECC 6.0 EHP4 version in the organization. If anybody have any idea, need help .
Thanks in Advance.
Prashant Kunjir

Have a look at the following note:-
Note 1573200 - How to restructure the statistic data of the sales information system (SIS)
But before trying to carry out the process as detailed in the above note, first check with other SIS reports like MCTA etc., and no reports are showing correctly, then you can proceed. Otherwise, you need to raise an OSS message with SAP.
G. Lakshmipathi

Since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

since I upgraded to os 5.1 for my iPhone I can no longer type in reminders. Any suggestions how to get around having to use siri for reminders?

Unfortunately, I have a very similar problem. Since I upgraded to os 5.1 on my new iPhone 4S the reminders screen will not add new reminders or scroll up and down. What's more strange is the screen will still scroll side to side allowing access to the Completed list, and both the Completed list and Date functions work normally so this must be an upgrades glitch.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

How to get active programs/custom ABAP developments for past 6 months?

Similar Messages

Maybe you are looking for