How to get buttons to play in numerical order

On my menu page I have a total of seven buttons going left to right, slightly staggered up and down. They are labeled in correct order: Button 1, followed by Button 2...etc. When I simulate, however, and click the right arrow to go to the next video in the sequence, it goes from Button 1 to Button 3 (which are at same height), then to Button 2 (which is between Buttons 1 and 3 but slightly lower. I am sure it is because the items are staggered up and down and not perfectly in line, but how can I correct this so that when I push the "next" arrow it goes in proper numerical order?

It sounds like you are using DVD SP to automatically assign Navigation. You can override this by clicking on each button in turn, then looking at the Inspector. Hit the Advanced Tab. There you will find the means to override the Navigation.

Similar Messages

HT1725 Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

mpeg4s I create and upload to Internet play fine on Mac and PCs, but not on iPad or iPhone. Does anyone know how to get them to play on iPads/iPhones?

You have to make sure they are fully compatible with iPad
Video formats supported:
H.264 video up to 1080p, 30 frames per second, High Profile level 4.1 with AAC-LC audio up to 160 Kbps, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video up to 2.5 Mbps, 640 by 480 pixels, 30 frames per second, Simple Profile with AAC-LC audio up to 160 Kbps per channel, 48kHz, stereo audio in .m4v, .mp4, and .mov file formats;
Motion JPEG (M-JPEG) up to 35 Mbps, 1280 by 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi file format

HT4061 How do I keep photos in alpha-numerical order when syncing them from my laptop?

How do I keep photos in alpha-numerical order when syncing them from my laptop?

Read this: http://support.apple.com/kb/HT4221

How to get videos to play.

I get my videos onto the itunes library and try to put them onto my ipod but it will only play as music not as a video. How do i get videos to play?

Go to Videos.Video Settings...Make Sure "TV Out" is set to "OFF" on the IPOD:
iPod plays audio but not video of movies:
http://docs.info.apple.com/article.html?artnum=302828

How to get the width of a numeric field at runtime

Hi, everyone :D
Is there a built-in that let me get the width of a numeric field at runtime? The SRW bulit in only has the SWR.GET_PAGE_NUM built-in. Is there something like the Get_item_property of Forms IN Report?
Thanks
Edited by: user12422762 on 07-ene-2010 14:16
Edited by: user12422762 on 07-ene-2010 14:30
Edited by: user12422762 on 08-ene-2010 4:40
Edited by: user12422762 on 08-ene-2010 4:50

Hi. Thanks for answering. I need the width because i want to set the format of the field at runtime. The quantity of decimal digits for all the numeric fieds in the report is received as a parameter.
I can use a function to create the respective decimal mask ('D99,'D999',etc.) and then call the SRW.SET_FORMAT_MASK in the format trigger of every single field, but i'd have to type the mask of the integral part of the number in the code of the trigger ('99G999D99, '999G999G999D'). However, If i could get the width, i'd just create a function and call it from every format trigger.
Edited by: user12422762 on 08-ene-2010 10:05
Edited by: user12422762 on 08-ene-2010 10:06
Edited by: user12422762 on 08-ene-2010 10:08

How to get audio to play through TV?

I have a Thunderbolt to HDMI cable and can only get video to show up on my HDTV screen. I am trying to get audio to play through the TV as well, but it only plays through my Macbook Pro. Any suggestions?

Hi ajlarson6,
I found some information concerning the settings that need to be in place to play audio through a TV:
OS X Mountain Lion: Use a television as a display
http://support.apple.com/kb/PH10671
I hope this helps!
- Ari

How to get audio to play on Ipad using flash cc html5 canvas

I'm using flash cc html5 project type. I built my project and tested on desktop and it works fine. Once test on ipad it does not play the audio. It works on android devices but not my ipad 4. I'm using Mp3 files in my flash project.
I tried the safari & Chrome on my Ipad neither played the audio in my file.
Links to my files.
http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.html
http://dev.wisc-online.com/prototypes/TestJosh/cis3405_html5.js

Thanks I read through that. I still cant determine what exacty my issue is.
Is it audio must be played only on a click handler?
Is it that i must install quick tiem on my ipad?
So i have to modify code that flash outputs for me to get audio to play on an Ipad? That doesnt seem correct? It should just function.

How to get Tax condition's of Purchase Order

Dear Gurus
How to get all the condition types for purchase order listed in the screen where we navigate from
Purchase Order->purchase order item->invoice->Taxes Push button
And I' am not saying about header conditions which we get from KONP.
I' am saying about tax conditions which will get only by entering taxcode in item Invoice tab of Purchase order item.
Regards,
Rajeswar

Hi,
Tax condtions shd be given by functional consultants.ABAPers cant decide the tax condtions.
you can have these condtions in KONV table.
In item level vbrp-posnr = konv-kposn.
ekpo-ebelp = konv-kposn
at header level as said in the below thread
Just see this and get back if any concerns
Regards
Edited by: Rasheed salman on Dec 2, 2008 6:20 AM
Edited by: Rasheed salman on Dec 2, 2008 6:22 AM

How to get the IObject from the service order number

Hi Experts,
I am implementing the CRM_ORDER_STATUS Badi, in that I am getting the Service Order number but I want to get the IObject number, how to get it, which FM to use or any other table.
Please let me know.
Thanks in Advance for your help,
Praveen

Hi Praveen,
In the interface of the badi methods there is import parameter IS_STATUS_WRK with the field GUID
use that one to call FM CRM_ORDER_READ with that GUID (check if the GUID is for ORDER by using update saved trnsaction).
in the export parameter ET_ORDERADM_H you will find the object id (only after save unless it was customizing different)
Amit.

How to get pre-calculated tax detail before order entry.

Hello,
Is there any API to get TAX detail that applied on order before order book.
We need pre-calculated TAX amount before order entry and that we have to pass to customer when they search for item on website.
Please advice if have any script available.
Regards,
Akil.

Hi Akil,
no, we have not found a "standard" solution. We have made some customization that calculates some "estimated Tax" and prints in on the Order Acknowledgment. But nothing within the system itself, unfortunately.
Do you get an estimated Tax calculated when you book your order? If yes, then perhaps you should think about changing your process and get the orders booked?
regards,
David.

How to get sour to play through mini display via vga without sound cables?

I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.

Whovian wrote:
I know that many of you guys might tell me that this question is stupid or that it is impossible to do it but i run in to problems that usually the company that made the product can't asnwer it all the time. So here it is. I have the mid 2009 MBP 17 in. 2.8ghz Core 2 duo. I've been using a minidisplay to VGA cable to connect to a sony briva tv since i've had it. and most time i'd have to plug in the 3.5mm jack to get the audio working. but once just once my mac decided to give all the audio control over to the TV without the auxilary cable plugged in. See, i accidentally pressed play and i started to hear sounds. but it wasnt from my mac. and the volume was completely up to the control of the tv. it was weird yet convinent, but as i was checking the connection to see what the **** i did, i took it out of clam mode which swithch my resolution and reconnect the display with the sound having to go through the auxilary again. So if any of you have had this luck and know how to do it please help me out.
Can't be done dude

How to get button at runtime

Hi Experts,
In my report i use for dipaly button:
I have 3 button in my report
below my dispaly button code:
selection-screen function key 1.
selection-screen function key 2.
selection-screen function key 3.
INITIALIZATION.
MOVE 'DISPLAY' TO SSCRFIELDS-FUNCTXT_01.
MOVE 'DELETE' TO SSCRFIELDS-FUNCTXT_02.
MOVE 'UPDATE' TO SSCRFIELDS-FUNCTXT_03.
when programn run i have to disable the update:
through this coding :
AT SELECTION-SCREEN OUTPUT.
APPEND 'ONLI' TO itab.
APPEND 'FC03' TO ITAB.
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
    p_status = sy-pfkey
    TABLES
    p_exclude = itab.
now what i want when i click on display button then my update button is enable on the screen. in Itab i have value of update but how can i get this value.... from itab...
Pl give me suggestion.........
Jigar

Hi Ashish,
below my code:::
just refer it.................
REPORT ZFI_DLC_DESKCODE_DELETE.
DATA DECLARATION
TABLES : ZDESKDLC,SSCRFIELDS.
selection-screen function key 1.
selection-screen function key 2.
selection-screen function key 3.
DATA: LW_SELECT TYPE zdeskdlc,
      LW_UPDATE TYPE ZDESKDLC,
      W_ANSWER(20).
clear: lw_update, lw_select.
data: begin of itab occurs 0,
      sy-ucomm like sy-ucomm,
      end of itab.
*DATA itab TYPE TABLE OF sy-ucomm.
*DATA ITAB type SY-UCOMM OCCURS 0 WITH HEADER LINE.
DATA: P_REPID LIKE SY-REPID.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
    PARAMETERS: CCOD LIKE ZDESKDLC-CCODE MODIF ID ABC.
    PARAMETERS: DESKCODE LIKE ZDESKDLC-DESK_CODE MODIF ID ABC.
SELECTION-SCREEN END   OF BLOCK B1.
SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-001.
    PARAMETERS: CCOD1 LIKE ZDESKDLC-CCODE MODIF ID DEF,
                DESKCD LIKE ZDESKDLC-DESK_CODE MODIF ID DEF,
                SR_MANAG LIKE ZDESKDLC-SR_MANAGEMENT MODIF ID DEF,
                LASTNAME LIKE ZDESKDLC-LAST_NAME MODIF ID DEF,
                FIRSTNM LIKE ZDESKDLC-FIRST_NAME MODIF ID DEF,
                DEPART LIKE ZDESKDLC-DEPARTMENT MODIF ID DEF,
                ADM_SYS LIKE ZDESKDLC-ADMIN_SYSTEM MODIF ID DEF,
                RACF_ID LIKE ZDESKDLC-RACF_ID MODIF ID DEF,
                OPEN_DT LIKE ZDESKDLC-OPEN_DATE MODIF ID DEF,
                CLOSE_DT LIKE ZDESKDLC-CLOSE_DATE MODIF ID DEF,
                SAPUSRID LIKE ZDESKDLC-SAP_USER_ID MODIF ID DEF.
SELECTION-SCREEN END   OF BLOCK B3.
START-OF-SELECTION
INITIALIZATION.
MOVE 'DISPLAY' TO SSCRFIELDS-FUNCTXT_01.
MOVE 'DELETE' TO SSCRFIELDS-FUNCTXT_02.
MOVE 'UPDATE' TO SSCRFIELDS-FUNCTXT_03.
AT SELECTION-SCREEN OUTPUT.
AT SELECTION-SCREEN OUTPUT.
APPEND 'ONLI' TO itab.
APPEND 'FC03' TO ITAB.
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
    p_status = sy-pfkey
    TABLES
    p_exclude = itab.
AT SELECTION-SCREEN.
AT SELECTION-SCREEN.
    clear lw_update.
    LW_UPDATE-SR_MANAGEMENT = SR_MANAG.
    LW_UPDATE-LAST_NAME   = LASTNAME.
    LW_UPDATE-FIRST_NAME = FIRSTNM.
    LW_UPDATE-DEPARTMENT   = DEPART.
    LW_UPDATE-ADMIN_SYSTEM   = ADM_SYS.
    LW_UPDATE-RACF_ID   = RACF_ID.
    LW_UPDATE-OPEN_DATE   = OPEN_DT.
    LW_UPDATE-CLOSE_DATE   = CLOSE_DT.
    LW_UPDATE-SAP_USER_ID   = SAPUSRID.
    SELECT SINGLE * FROM ZDESKDLC
    INTO lW_SELECT
    WHERE CCODE = CCOD1 and
    DESK_CODE = DESKCD OR CCODE = CCOD AND DESK_CODE = DESKCODE.
IF SSCRFIELDS-UCOMM = 'FC01'.
*MOVE: P_REPID TO GLOBAL-PROG.
*MOVE ITAB(2) TO 'SCRH'.
*MOVE ITAB(2) TO SSCRFIELDS-FUNCTXT_03.
*MOVE P_REPID TO GLOBAL-PROG.
   move itab-fc03 to SSCRFIELDS-FUNCTXT_03.
*move 'FC03' TO SSCRFIELDS-FUNCTXT_03.
*append itab to 'FC03'.
*CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
   p_status = sy-pfkey
   TABLES
   p_exclude = itab.
*MOVE 'UPDATE' TO SSCRFIELDS-FUNCTXT_03.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
    clear lw_update.
    CLEAR LW_SELECT.
    lw_update-ccode = ccod1.
    lw_update-desk_code = deskcd.
    LW_UPDATE-SR_MANAGEMENT = SR_MANAG.
    LW_UPDATE-LAST_NAME   = LASTNAME.
    LW_UPDATE-FIRST_NAME = FIRSTNM.
    LW_UPDATE-DEPARTMENT   = DEPART.
    LW_UPDATE-ADMIN_SYSTEM   = ADM_SYS.
    LW_UPDATE-RACF_ID   = RACF_ID.
    LW_UPDATE-OPEN_DATE   = OPEN_DT.
    LW_UPDATE-CLOSE_DATE   = CLOSE_DT.
    LW_UPDATE-SAP_USER_ID   = SAPUSRID.
    SELECT SINGLE * FROM ZDESKDLC
    INTO lW_SELECT
    WHERE CCODE = CCOD1 and
    DESK_CODE = DESKCD OR CCODE = CCOD AND DESK_CODE = DESKCODE.
    move lw_select-ccode to ccod1.
    move lw_select-desk_code to deskcd.
    move LW_select-SR_MANAGEMENT to SR_MANAG.
    MOVE LW_SELECT-Last_name TO LASTNAME.
    MOVE LW_SELECT-FIRST_NAME TO FIRSTNM.
    move LW_select-DEPARTMENT to DEPART.
    move LW_select-ADMIN_SYSTEM to ADM_SYS.
    move LW_select-RACF_ID to RACF_ID.
    move LW_select-OPEN_DATE to OPEN_DT.
    move LW_select-CLOSE_DATE to CLOSE_DT.
    move LW_select-SAP_USER_ID to SAPUSRID.
    CLEAR LW_SELECT.
    if sy-subrc <> 0.
        MESSAGE S002(zjig)." WITH 'NO RECORD FOUND'.
        clear: ccod, deskcode.
    endif.
ENDIF.
IF SSCRFIELDS-UCOMM = 'FC02'.
if sy-subrc <> 0.
        MESSAGE S002(zjig)." WITH 'NO RECORD FOUND'.
        clear: ccod, deskcode.
else.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
titlebar = 'Warning'
text_question = 'Are you sure want to delete this record'
text_button_1 = 'YES'
text_button_2 = 'NO'
DEFAULT_BUTTON = 1
display_cancel_button = ' '
start_column = 25
start_row = 6
IMPORTING
answer = W_ANSWER.
CASE W_ANSWER.
    WHEN 1.
    DELETE from zdeskdlc where
    CCODE = CCOD AND
    DESK_CODE = DESKCODE.
      IF SY-SUBRC = 0.
        MESSAGE S001(zjig)." WITH 'Data Delete successfully'.
        clear: ccod, deskcode.
        clear: CCOD1,DESKCD,SR_MANAG,LASTNAME,FIRSTNM,DEPART,ADM_SYS,RACF_ID,OPEN_DT,CLOSE_DT,SAPUSRID.
      ELSE.
        MESSAGE S002(zjig)." WITH 'NO RECORD FOUND'.
        clear: ccod, deskcode.
      ENDIF.
ENDCASE.
endif.
endif.
IF SSCRFIELDS-UCOMM = 'FC03'.
UPDATE zdeskdlc SET SR_MANAGEMENT = LW_UPDATE-SR_MANAGEMENT
LAST_NAME = LW_UPDATE-LAST_NAME
FIRST_NAME = LW_UPDATE-FIRST_NAME
DEPARTMENT = LW_UPDATE-DEPARTMENT
ADMIN_SYSTEM = LW_UPDATE-ADMIN_SYSTEM
RACF_ID = LW_UPDATE-RACF_ID
OPEN_DATE = LW_UPDATE-OPEN_DATE
CLOSE_DATE = LW_UPDATE-CLOSE_DATE
SAP_USER_ID = LW_UPDATE-SAP_USER_ID
WHERE CCODE = CCOD1
AND DESK_CODE = DESKCD.
    IF SY-SUBRC = 0.
        MESSAGE S003(zjig)." WITH 'data modified successfully'.
    ENDIF.
    CLEAR LW_UPDATE.
ENDIF.

How to get button to go to another scene? Error #2108 scene not found.

Hi flash users,
I believe I'm not alone in this problem but I don't see any answers in any of the forums.
I have a movie clip that has a button that I wish to take me and play my first scene at frame 1.
I labeled my the 1st frame "startLabel" and my scene is named "mainScene", and that's where I want to go from my "button" that is placed in my "movie clip symbol scene".
Here's my code:
resetButton1.addEventListener(MouseEvent.CLICK, getToWhereIWant);
function getToWhereIWant(event:MouseEvent):void
gotoAndPlay("startLabel","mainScene");
Here's the error I'm getting:
ArgumentError: Error #2108: Scene mainScene was not found.
at flash.display::MovieClip/gotoAndPlay()
at project2_b_fla::building_1/getToWhereIWant()
Thank you in advance for any insight to this problem....

Hi kglad,
I got my animation to work finally after hours trial and error....
Here's the function code:
function restartInMainScene(event:MouseEvent):void {
//this original didn't work, error said can't find mainScene
//gotoAndPlay(1, "mainScene")
//FIXED
//sets current movie clip symbol to frame 1
gotoAndStop(1);
//goes to mainScene and plays frame 1
MovieClip(this.root).gotoAndPlay(1, "mainScene");

How to get music to play continuosly on my 3gs ?

how do i play music continuosly on my iphone 3gs
after downloading some personal cd's, I seem to get same song repeately

Open itunes, connect iphone, click File>Devices>Transfer Purchases

How to get buttons to play in numerical order

Similar Messages

Maybe you are looking for