How to get correct note notation in score?

The problem, in a nutshell, is that in some cases (see below) half notes are represented in the score as tied quarter notes, and I can't seem to do anything to change it.
Here's the piano roll of the first measure (V - V7 - I). This is 4/4 time. Note the combined quarter and half notes in the first two beats, and half notes only in the last two beats of the measure.
Here is the corresponding score.
Note that the B and D are tied quarter notes. (With some quantizations, this can really get ugly.) I want them to be half notes, which is standard notation. Is there any way to do this?
FYI, here is the top part of the score inspector:
Thanks

Hi
You need to use a polyphonic Staff Style to do this:
Individual notes are assigned to the voices by MIDI channel. You can do this with the Voice Separation tool, in the Event list or by key command.
HTH
CCT

Similar Messages

I need to know how to get my notes onto icloud without retyping them

i need to know how to get my notes onto icloud without retyping them

First of all - allow me to provide you a link relating to security / av etc.....
http://www.thesafemac.com/mmg/
secondly - data confirm your exterminal drive is compatable with your mac
* i have a 1tb external where I have 1/2 formated for mac and 1/2 for win....on the win side I can read the file and move it but not update it...on the mac side I can do all
third - depending on how your emails area set up (pop3, imap, http) and you left them in the cloud (or on your email providers server) you simply add the mail to your mac mail

How to get oss notes ?

hi guru's,
how to get OSS notes ? is there any special subscription for this,
Edited by: ravi netyam on Oct 29, 2008 11:34 AM

you can go to service.sap.com/notes to browse note than in sap go to snote (tcode) to download and apply it .
Please check below thread to get more details.
Can a functional guy check if a certain NOTE had been implemented
Checking if different versions of a SAP Notes are implemented or not
Manish
Edited by: Manish Kumar Rathi on Oct 29, 2008 7:58 AM

How get correct note values on the staff?

I'm new to Garageband. When I feed in a tune from my keyboard (melody only), the note values are mostly wrong, unless I make the notes all quarter notes or all eighth notes, and play them exactly with the metronome. (The notes show up as triplets, or two notes simultaneously,etc., instead of a dotted quarter note, and so on.
Where can I find more info on how to get the correct notation to appear in GarageBand?
Thanks
larryac

GB is not notation software, and it's accuracy is debatable, but this thread may help:
http://discussions.apple.com/thread.jspa?messageID=9861501&#9861501

How to get correct format in file at Application server

Hi,
I am retrieving data MATNR,MAKTX,VENDOR,VENDOR NAME,PRODUCT HIERARCHY,QUANTITY(LABST),BUDAT.
I am downloading the data into .xls file in both presentation and application server.
In presentation I am getting correct format.
Where as in application server I am not getting proper format.
Quantity(MARD-LABST) is not coming proprely.(###6## instead of 36)
How to get it in correct forma?I

symbol means Space
Before transfer the data to File..
condense MARD-LABST and then transfer it.
I guess you are using charcter field LABST while transferring the data to file.
Do not use quantity field directly,please move it to charcter field then condense it.
Thanks
Seshu

How to get correct voltage reading?

Currently I am using PCL-818 DAS card from Advantech. Advantech's test program shows value correctly and I compare it with the multimeter. Problem is that I cannot get them correctly. For eg. The actual reads 5V but the indicator on front panel reads 0.09V instead. I used Advantech's AIVoltageIn.vi. What are the right adjustments I should apply on the Numeric Indicator's properties?

astroboy wrote:
> Currently I am using PCL-818 DAS card from Advantech. Advantech's test
> program shows value correctly and I compare it with the multimeter.
> Problem is that I cannot get them correctly. For eg. The actual reads
> 5V but the indicator on front panel reads 0.09V instead. I used
> Advantech's AIVoltageIn.vi. What are the right adjustments I should
> apply on the Numeric Indicator's properties?
I had to deal once with an Advantech card and I think you had to first
configure it for a certain input range, which depends on the card you
are using, or maybe jumbers on it :-(. Your problem looks very much like
the card is configured to read for instance 0 - 10 V but the software
believes the card is set to -5 - +5 V.
Of course the configuration param
eter on that VI was just a number 0, 1,
2, 3, 4, etc so it was not very user friendly and in that particular
case I just played around a bit until I got the correct measurements.
I told however the guy asking me to show him how to get the card
running, that I didn't very much like this driver and that I feel a LOT
more comfortable to program with NI-DAQ than this quite user unfriendly
library. Not sure if he did buy his next card from NI though.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to get correct node in JTree with DISCONTIGUOUS_TREE_SELECTION mode?

The following code creats a JTree with DISCONTIGUOUS_TREE_SELECTION mode. When select a single node, the node's name is printed correctly as expected. However, in Window environment, after select one node, if holding the ctrl key and select a different node, the program still prints out the name of the first selected node although both nodes are highlighted. Can some one tell me how to get the name of the second (i.e. the last) selected node printed?
Thank you very much!
import javax.swing.*;
import javax.swing.tree.*;
import javax.swing.event.*;
import java.io.*;
public class TestTree extends JFrame {
JTree tree;
public TestTree() {
super();
setBounds(0,0,500,500);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
tree = new JTree();
getContentPane().add(tree);
TreeSelectionModel model = new DefaultTreeSelectionModel();
model.setSelectionMode(TreeSelectionModel.DISCONTIGUOUS_TREE_SELECTION);
tree.setSelectionModel(model);
tree.addTreeSelectionListener(new TreeSelectionListener() {
public void valueChanged(TreeSelectionEvent e) {
Object obj = tree.getLastSelectedPathComponent();
System.out.println(obj.toString());
public static void main(String [] args) {
TestTree test = new TestTree();
test.show();

Hi!
Try this, maybe it's what you want?
/Smedman
public void valueChanged(TreeSelectionEvent e)
    TreePath[] paths = tree.getSelectionPaths();
    for (int i = 0; i < paths.length; i++)
        System.out.println(paths.getLastPathComponent());

How to get a note to carry over to the next measure?

I want to know how to "slide" into the one beat from the 15/16 beat of the previous measure. In other words, how can I get a note to cross over from one measure to the next?
Thanks-

Thanks for bearing with me.
I created a region (up in the track timeline) which spans two measures. When I pencil in a note in the grid below (in Piano Roll) near the end of measure one, I cannot extend it or drag it into measure two (even though they both reside in the same region). Even stranger, whatever note I write into the grid in measure one gets "ghost" duplicated in measure two.

How to get the notes

Hi Gurus,
Can u plz let me know how to get the desired notes from SERVICE.SAP.COM/NOTES, am not getting the proper notes its just giving notes No. and when search the notes from tat perticular No. its just giving, hte overview.
Thanks & Regards
Syed..

Hello,
I am providing the direct link here. Click and give SUser Name and Passwd.
https://websmp109.sap-ag.de/notes
In this window, Right Side you can enter direct Note number and also,
You can search and find appropriate solution/Notes.
Note: Points always encourage me to reply !!

How to get correct coordinate & size of components in scaled swf

I use canvas (I set it to fit whole screen size) to enclose a swfloader which loads a swf with width & height set to 100%. This swf has a movieclip. How can I get the correct coordinates of its position and its size after scaled in Flex?
In the Flash CS4, the movielip has x=40, y=700. In Flex, the swf is scaled 100% but when I get the x value of this movieclip, it's still 40. I try to get the scale ratio of x-axis by refering to swf's scaleX. But its 1, weird enough.
How can I get correct coordinates of movieclip?

I do try the localToGlobal but it seems its 1:1 ratio, the codes I use:
// swf is loaded by swfloader, there's a movieclip child named 'child_mc' in it, I want to locate its postion and size. It's top-left coordinates in flash cs4 is 4,740
var swf_obj:MovieClip = MovieClip(swf.content);
var mymc:MovieClip = swf_obj.child_mc;
child_before:Point = new Point(mymc.x, mymc.y);
child_after:Point = swf.localToGlobal(child_before);
Alert.show(
"before:"+child_before.x+","+child_before."y"+"\n"
+ "after:"+child_after.x+","+child_after."y"+"\n"
the dump result is:
before:4,740
after:4,740
dump screenshot is here: http://img198.imageshack.us/img198/2396/image2ew.png
I use values of child_after to draw green box. The white box is child_mc's actual position after scaled to fit canvas size (in turn the screen size). You can see they are far from each other. Why?
Do you mean I have to multiply the transform matrix myself to get the correct position?

How to get instance notes in a global

I have a global in a utility project that gets called through PAPI WS from an external client.
I want this global to take an instance id as the input argument. It should then get a reference to the instance, get the instance notes currently associated with that instance and pass them back (as an array of delimited strings). The instance will be residing in one of many other projects.
I can use PAPI in the global to connect to a BusinessProcess:
connectTo bp
using url = Fuego.Server.directoryURL,
user = String(BusinessParameter.getValue(name : "GENIE_UID")),
password = String(BusinessParameter.getValue(name : "GENIE_PW")),
process = "/" + ou + "/" + process
and I can get a reference to the instance using bp.getInstance(), but I can not see anywhere in any of the PAPI methods where I can get the instance notes for that instance.
BTW I am using both ALBPM 5.5 and 6.0, so I need a solution for both.
Basically this external client wants to get instance notes for a given instance (and there is other processing I need to do as well - I need to add in custom notes from a custom table before I return the results, so they can't just use PAPI WS directly to get the instance notes).

I ran into this problem and requested from Product Management that they allow PBL code to get instance notes, audit info, etc. It's been a while since I've run into this problem but I'm sure it's the same issue. You can only get information about the instance notes, audit info, etc from PAPI.
The architecture of BPM is such that the BPM workspace actually uses PAPI to do all its work. So in other words anything the workspace does, PAPI can do. But from within a process, PBL code doesn't have access to all PAPI functionality. You may want to raise this issue up with product management and see if they have any recommendations.
BTW - It is not recommended to instrospect BPM tables to use from within your process. Although this would solve your problem, it is not recommended...
Cheers!
Mark

How to get correctly any non english data e.g greek data in servlet??

Hello All,
I have one textbox on form from where user will enter greek data and when i get that field data in servlet using request.getParameter("name") ,then it shows wierd text in servlet ,it ditorts all the characters that user enterd on page,how can i get greek data in servlet wothout losing it????
Please help
Thanks.

1.) Read [this excellent introduction into Unicode|http://www.joelonsoftware.com/articles/Unicode.html]. The subject is more complex than you think.
2.) Verify at each point in your program that your String contains the correct value. Note that using System.out.println() might not be helpful here, since the console might not be able to display those characters.
3.) When a String contains invalid characters, then the error already happened before! Don't try to fix it after the fact, look where the original byte[]->String transition is made and make sure that it is correct.

How to get correct result in MD04

Hi Gurus,
For a packaging material under this process order A01, it requires 10000 EA.
Goods issue to order done in 3 batches,
first posting with 2 batches:
ABatch - 2372.00
BBatch - 7610.00
2nd posting one batch:
BBatch - 50.00
When run MD04, it still show that this process order need 7,578.000 qty, and when i checked the material under this
process order A01, qty withdrawn only 2422.00.
But in MCRX, the total withdrawal qty is 10032.00, which is correct.
Why it didn't capture the qty withdrawn of 7610.00 for this BBatch?
What should I do in order to get the correct result in MD04?
Please kindly help.
Many thanks in advance.

Dear Dhaval & Prasobh,
The actual scenario is that we have this Process order A01, for this packaging material component it required 10000, but the problem is the stock available is by batch:
ABatch - 2372.00
BBatch - 8000.00
We are practicing FIFO, therefore, during MIGO> Goods Issue> Order, after enter the order A01, all the component under this order will be populated. Since there's only one line populated for this packaging material component under this order, as we need to have 2 batches in order to cater for all the 10000 qty, we have to right click>add new line in the MIGO screen, and enter the material/qty/batch and order number (under account assignment tab) manually, then only post at once (one material document generated)
How should we do if this is not the correct way of doing?
Or we need to post those planned GI, then only do another posting for those remaining qty that yet to be posted?
Or we need to manually set the Final Issue everytime after the above done, before we TECO the process order?
Dear Dhaval,
Yes, I have checked in the List documented goods movement, the goods movement indicator for this manual entered line is "2".
I will try your suggestion to manually activate the check box for "Fls"- Final Issue field in change process order.
Thanks & Regards,
Sue

How to get Correct curent time and date

Hi,
I would like to know whether system keeps updating SY-UZEIT each second or it contains the time value when the program was started.
Suppose a program starts at 12:00:00 time and takes 10 sec to finish. Will I get same value of SY-UZEIT or will i get 12:00:10 as value of sy-uzeit just before completetion of program?
If the time is not updated each second, how can I get the correct time?

Hi surya,
the SY-UZEIT will not be automaticly updated in the runtime.
you have to use GET TIME.
Here a short example to show the different:
REPORT ZGRO_TEST.
TABLES: MARA.
write: / 'without get time'.
WRITE: / SY-UZEIT.
SELECT * FROM MARA up to 10000 rows.
ENDSELECT.
WRITE: / SY-UZEIT.
write: / 'with get time'.
get time.
WRITE: / SY-UZEIT.
SELECT * FROM MARA up to 10000 rows.
ENDSELECT.
get time.
WRITE: / SY-UZEIT.
regards, Dieter

How to get correct aspect ratio? Hi-8 transfer

I am Importing through a Datavideo box but cannot get the aspect ratio correct No matter how I set the project I get a 4:3 aspect rather than 16:9.
I don't have the problem in IMovie HD. When I open new project inImovie it asks for standard or widescreen and mports correctly.

I posted screen shots of each step I took.
http://www.flickr.com/photos/yoda8945
I downloaded the file from the camera to an event.
I created a new Project in 720x480 anamorphic
I went to timeline and the file is no not anamorphic.
http://www.flickr.com/photos/yoda8945
I a now starting to understand how this anamorphic thing works. It can stay at 4:3, but at some point I need 16:9.
How do I batch change in the browser? I don't find anything about an anamorphic flag.

How to get correct note notation in score?

Similar Messages

Maybe you are looking for