How to get incoming call number in j2me

hi all,
Is there any way to get incoming call number in j2me???
thanks in advance
mraj

You can't get this number at least till MIDP 2.0 devices.. you only have a interrupt events which call showNodify and hideNotify, pauseApp or start methods. Once can neither know if this interrupt is due to phone call, user switching to menu or sms etc..
Regards,
Raja Nagendra Kumar

Similar Messages

How to handle incoming call by means j2me

Hello Everyone,
Let me kindly ask your support in such important for me question: How I can handle incoming calls by means j2me (cldc - 1.0; midp - 2.0).
Thank you in advance.

I mean what I say: you can't handle calls in j2me.

How can I turn off the phone saying "Call from" #/name when getting incoming call.

How can I turn off the phone saying "Call from" #/name when getting incoming call before the ring tone starts? I have a LG accolade

I recommend checking your prompts and alerts to turn this feature off. This may be you "Call Connect" or "Readout" alerts. Listed below are steps to update this feature.
With the flip open, press the Voice Command Key (on the left side of the phone).The Voice Commands feature has several settings which allow you to customize how you want to use it. Access Voice Commands, then press the Right Soft Key[Settings]. Your choices are below:
-Confirm Choices--- Automatic/Always Confirm/ Never Confirm
-Sensitivity--- Control the sensitivity as More Sensitive/ Automatic/Less Sensitive
-Adapt Voice ---If the phone often asks you to repeat voice command,train the phone to recognize your voice patterns.Train Words/ Train Digits
Prompts ---Mode/ Audio Playback/Timeout
* For Mode, set Prompts/ Readout+ Alerts/ Readout/ Tones Only.
* For Audio Playback, set Speakerphone or Earpiece.
* For Timeout, set 5 seconds or 10seconds.

Add prefix 9 for incoming calling number of missed call only.

Dear,
I am wondering how to add the prefix 9 to incoming calling number of missed calls only, not the calling alerting number on the phone screen. For example, the local user 472 2001 calls our DID 482 3001 along with the calling number 472 2001 on the dialed phone screen, if I missed this call, in the directory missed call I can see 94722001.
I know I can add the prefix in the field incoming called party subscriber prefix on the gateway page, but when I do this, all of the calling number information show 9.
Thanks,
Kirin

If I understand you correctly, you would like to only change the missed calls/placed calls on your phones without changing the digits?
If you have an PRI, you can use this translation rule to change calling ID only on inbound calls:
Translation pattern to modify Caller ID to add a 9
voice translation-rule 1
Rule # /match/ /set/
(^.= Match anything begining with any number)(*= one or more digits) tranlasate to (9& = Take whatever is in the match phase and plug it in here)
rule 1 /^.*/ /9&/ type subscriber subscriber (subscriber = ton(Ton=Type of number) value local area)
rule 2 /^.*/ /91&/ type national national (national = ton value long distance area)
rule 3 /^.*/ /9011&/ type international international (international = ton value international area)
Config t
voice translation-rule 1
rule 1 /^.*/ /9&/ type subscriber subscriber
rule 2 /^.*/ /91&/ type national national
rule 3 /^.*/ /9011&/ type international international
voice translation-profile INBOUND_PSTN
translate calling 1
voice-port X/X/X
translation-profile incoming INBOUND_PSTN
Let me know if this helps.
John

How to limit incoming call on B-ACD CME?

I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
Here are my config:
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 30
param queue-manager-debugs 1
param number-of-hunt-grps 1
param aa-hunt2 0
service aa flash:app-b-acd-aa-2.1.2.2.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 1
param max-extension-length 7
param aa-pilot 2999
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 0
param service-name queue
FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
Regards,
Iwan

Hi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob

How to get a random number in a range?

as title
how to get a random number in a range?
like 2000~3000 thks :)

int between 10 and 20 with the method Math.random():
public class Rnd
     // Test
     public static void main(String[] args)
         int start=10, end = 30;
         for (int i = 0; i < 10; i++)
            int n = (int)(start + Math.random() * (end-start));
            System.out.println(n);
}best regards.

How to get the total number of pages printed in a report?

Hi All,
I have a requirement where I need to print a frame of fields only in the last page. Unfortunately I cannot use the 'Print Object On' property as it doesnt work in my case. So, I am planning to write a format trigger on the frame to return TRUE if the page is the last physical page. Now, I need to know how to get the total number of physical pages that will get printed in the report so that I can use this to manipulate the frame. I was planning to use the 'Total Physical Pages' built-in, but it seems like I can just use it to print in a field and I can't use this field's value anywhere in the plsql code (formula column function/format trigger) in the report. Is there anyway to get the total number of pages printed in the report which can be used in the report plsql code?
Thanks,
Srini.

i found the solution, thanks

How to get the page number in the break section?

Hi expert,
The user wants the page number came right after the Break group name if the break section contains more than 1 page. E.g.
ABC Compnay
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 1
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
BCD Company, p 2
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
CDE Company
XXXXXXXXXXX XXXXXXXX
XXXXXXXXXX XXXXXXXXXXXX
How to get the page number in section break level?

Hi Wes
* Create a Field on the margin.
* Set its "Source" to "Page Number"/"Physical Page Number".
* Click "Page Numbering" button.
* In "Reset At" list box, choose the Repeating frame that surrounds your detail group in the layout.
This should cause Reports to increment the page number until the "Company" repeating frame resets.
Regards
Sripathy

How to get payment document number from paid column in monthly invoice

Dear experts
I use SBO japan version and i need to know how to get payment document number from paid column in monthly invoice ?
in table MIN1, only contain invoice and credit note document number, there is no payment document number
thank you for your help
Best Regards
JeiMing

Dear Gordon
Yeah, you are right, i can use field MIentry in RCT2
thank you
Best regards
jeiming

How to get purchase order number from delivery number?

hi all,
how to get purchase order number and item if i have only delivery.
and in same way how to get po number and item if i know only batch number.
kindly give me some solution i need this urgently.
thanks in advance.

Check the logic below:
* Selecting the Sales Documents from VBFA for corresponding Invoice
    SELECT vbelv
                 posnv
      FROM vbfa
      INTO TABLE gt_itab3
     WHERE vbeln EQ gt_itab5-vbeln
       AND posnn EQ gt_itab5-posnr
       AND vbtyp_n EQ 'J'.
    IF sy-subrc EQ zero.
      SORT gt_itab3 BY vbelv posnv.
    ENDIF.
ENDIF.
IF NOT gt_itab3 IS INITIAL.
* Selecting the Purchase Orders from VBFA for corresponding Sales Documents
    SELECT vbeln
           posnn
      FROM vbfa
      INTO TABLE gt_itab4
   FOR ALL ENTRIES IN gt_itab3
     WHERE vbelv EQ gt_itab3-vbelv
       AND posnv EQ gt_itab3-posnv
       AND vbtyp_n EQ 'V'.
    IF sy-subrc EQ 0.
      SORT gt_itab4 BY vbeln posnn.
    ENDIF.
ENDIF.
Batch number will be there in delivery item.
Regards
Kannaiah

How to get Contract Account Number in Service Ticket

Hi Experts,
How to get Contract account number in Service Ticket, we are working in ISU environment. when i create the service ticket the contract account number is there in Business agreement number field in service tiket.
Can anyone tell me how to retrieve that field.
Answer will be appreciated.
Praveen

check tables tfk_buag_ref and fkkvkp

How to get the Page Number in CS3 with VB?

Hi, Everybody
I use the Visual Basic to read the words and their page number where the Words are at. I want to do it according to Story. Some TextFrame of the Story waw placed in other pages: How can I get the Page number according to the Word that is selected?
For myStoryCounter = 1 to Document.Stories.Count
Set myStory = Document.Stories.Item(myStoryCounter)
For myWordCounter = 1 to myStory.Words.Count
Set myWord = myStory.Words.Item(myWordCounter)
myWordContents = myWord.Contents
Rem ** How to Get the Page Number according to the Word ***
Next
Next

> But I don't understand why Item(1) are set.
because Word can have more than one parent TextFrame - when split across TextFrames
only Character have one ParentTextFrame accessed also by ParentTextFrames.Item(1)
> why Story.TextFrames.Count alway is 0, Is it bug?
no - it's not bug
in older IDs - Story.TextFrames collection refer to all TextFrames as containers for Story text
but in CS3 - collection Story.TextFrames contain all TextFrames inserted as InLine/Anchored objects - same like Story.Rectangles or Story.Ovals
in CS3 - when you want to refer to TextFrames as containers for Story text - you need to use Story.TextContainers - because now you can link TextFrame and Text-On-Path as Story - Text-On-Path isn't TextFrame
robin
www.adobescripts.com

How to Get last page number in report 10g

I want to get last page number in report but Current page number found from srw.get_page_num(n)
but i want to get last page number for conditional formating like this
srw.get_page_num(current_page)=last_page
pls help me how can get last page number;
pls help;
thanks in advanced;

Hi,
you can use the Property Print Object On for this.
Regards
Rainer

How to get the document number for a ware house order.

Hello gurus,
how to get the document number for a ware house order. [if GI is posted refering that WH order] .. is there any report?
Thanks in advance

There are several options. When you post a Goods Movement, you can use LB12 -display Transfer Requirement for material document or LB11 Display TR for material.
Depending on how your system is set up you may have gotten a Transfer Order automcatically. In this case you can look at LT24 - Transfer Order for material.

I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student

I'm trying to load a student version of Acrobat XI Pro but not sure how to get the serial number to validate I'm a student

Hi ,
Could you please tell me form where did you purchase the Student version of Acrobat ?Is it through Adobe or some outside vendor ?
Is it the first time you are trying to access it ?
If yes ,then you must have received your serial number along with your product .
If not ,then how how did you manage to get your serial number and access Acrobat before ?
Regards
Sukrit Dhingra

How to get incoming call number in j2me

Similar Messages

Maybe you are looking for