How to handle incoming call by means j2me

Hello Everyone,
Let me kindly ask your support in such important for me question: How I can handle incoming calls by means j2me (cldc - 1.0; midp - 2.0).
Thank you in advance.

I mean what I say: you can't handle calls in j2me.

Similar Messages

How to get incoming call number in j2me

hi all,
Is there any way to get incoming call number in j2me???
thanks in advance
mraj

You can't get this number at least till MIDP 2.0 devices.. you only have a interrupt events which call showNodify and hideNotify, pauseApp or start methods. Once can neither know if this interrupt is due to phone call, user switching to menu or sms etc..
Regards,
Raja Nagendra Kumar

How to limit incoming call on B-ACD CME?

I have configure B-ACD on CME 4 and its working. But I have a problem with incoming call from outside (PSTN). I set queue-len for 30 queue. But on busy hour, some call hear only ring tone. No greeting tone or busy tone. When I check call session, its only 10 or 15 session.
How to limit incoming call, let say, for 10 calls only? The 11th call will receive busy tone.
Here are my config:
application
service queue flash:app-b-acd-2.1.2.2.tcl
param queue-len 30
param queue-manager-debugs 1
param number-of-hunt-grps 1
param aa-hunt2 0
service aa flash:app-b-acd-aa-2.1.2.2.tcl
paramspace english index 1
param number-of-hunt-grps 1
param handoff-string aa
param dial-by-extension-option 1
paramspace english language en
param max-time-vm-retry 1
param max-extension-length 7
param aa-pilot 2999
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param call-retry-timer 15
param max-time-call-retry 60
param voice-mail 0
param service-name queue
FYI: I have no voice mail. 'param voice-mail 0' is to send unanswered call to my operator.
Regards,
Iwan

Hi Iwan,
To restrict the number of calls to the application you need to configure only the appropriate number (10 in your example) of dial-peers to point to the AA Pilot number. Have a look;
Set Up Incoming Dial Peers for AA Pilot Numbers
In this task, you associate dial peers for incoming calls with the AA service that you want them to use.
Cisco Unified CME B-ACD is available for outside calls through voice ports and trunks, for which dial peers must be set up. When you set up a dial peer, you use the service command to associate it with the name of the Cisco Unified CME B-ACD AA service that you want callers to that dial peer to reach.
Note You must configure a dial peer for each incoming DID voice port.
To determine how many ports or trunks you must have for your Cisco Unified CME B-ACD service, consider the following:
Total number of phones across all ephone hunt groups
Total number of slots in the queues across all queues
Total number of PSTN ports feeding into the queues
The number of simultaneous calls that Cisco Unified CME B-ACD can handle is limited by the number of PSTN ports, but these ports may not always be in use. For example, you could have three queues with ten slots per queue, but configure only 10 ports instead of 30 because you do not expect the three queues to ever be full at one time.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/products_configuration_guide_chapter09186a00805f2305.html#wp1003323
Hope this helps!
Rob

How to disconnect incoming call in ios7 when iPhone is locked?

How to disconnect incoming call in ios7 when iPhone is locked?

Press the Sleep/Wake button twice quickly on the top of iPhone

How to block incoming call on iphone

how to block incoming call on iphone

Contact your carrier & see if they offer call blocking...some do, some don't. There is no other way to block calls on any cell phone.

How to handle Asynchronous calls using OSB?

Hi There,
How to handle Asynchronous calls using OSB?
Please help me out??
-Venkat

Hello friend, here is what you need.
Oracle Service Bus, invoke asynchronous webservices | Oracle .. Java .. OpenSource .. SOA

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

Handle incoming calls

i want to make an application that screens a call from a certain no. the algo to do this will be get the number of the call, check it, dont play ringtone if no. same as in database, else play it.
currently i am facing problem in the first part viz. getting the no.
what all parameters are available to us when a call comes.
also i am unable to find a way to silence the ringtone.
plz help.

you can play mp3 from J2ME.
http://forum.java.sun.com/thread.jspa?threadID=554582&tstart=30
As far as incoming call detection is concerned, I don't think so there will be any support for it in J2ME.

How to disconnect incomming call on iPhone 3GS with 4.3.2

I'm using iPhone 3GS but unfortunately I have no idea how to disconnect the unwanted incomming call.
Please guide me...!!

Ummmm, do not answer the call.
Or do you want to know how to block certain calls? That is a carrier function.

Handling incoming caller ID from legacy PBX

Hello,
At my company we're currently in the process of running Lync 2010 EV through a POC. Everything is working great at the moment except for incoming caller ID from the legacy PBX. When a call comes into Lync from the legacy PBX (either from a desk phone or
from outside the company), the legacy PBX replaces the actual 'from' number with the company's main number. Apparently this is due to the legacy PBX being old and masking the outbound caller ID information at a global level. (So basically ANY call that goes
outbound from the legacy PBX has the caller ID masked with the main number, no way to make exclusions. This has been verified by the vendor that services the legacy PBX.)
The problem this introduces on the Lync client is that in the address book everyone has the company's main number as their phone number, except with an extension at the end. So when a call comes in from the legacy PBX the Lync client quite literally randomly
picks someone from the address book and says the call is coming from the randomly picked person.
So far in my attempts to fix this, I've tried creating a contact in AD with a phone number of just the main number. This did not change anything from the Lync clients perspective, however when I miss a call that was sent from the legacy PBX, Outlook now
indicates that the missed call is from the contact object with the main number instead of saying I missed a call from some random person from the address book.
I've also looked into seeing if a MSPL script could intercept incoming audio requests and change the From parameter to something else if the From value was the main number. So far I haven't seen any examples of this, nor do I have a test environment to test
MSPL scripts in yet.
Does anyone have any suggestions on what can be done for the POC we're trying to do? Obviously if (more like 'when' really...) we decide to move everything over to Lync EV and pull the plug on the legacy PBX this won't be an issue, but right now I can't
even move forward with doing a POC outside of my team until I figure out something to do with the inbound caller ID.
Thanks,
Cody

How are you connected to the legacy PBX? It might be easier to put a modification in a gateway if you're using one.
Also, why Lync 2010 instead of 2013?
What do you have set for the lineURIs of the users? Is it the main number with extensions or a DID?
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

HT5957 How to reject incoming call.?

In os6XXX it was enough to slide up and reject button was appear. In os7 is only green button for receiving incomming call but there is no possibility to slide in order to get the button for reject incomming call. Why???

The call can be rejected by tapping the On/Off button, or double tapping to send immediately to VoiceMail.
As to why Apple removed that useful feature ?????

How to fordware incoming calls at determinate hours

I have configured a time period at no officce hours. After that, I assigned it to a time shedule. Then I assigned it to a partition and the partition to a calling search space.
Now, I want a dial number of my net to be fordwared to another phone number out of my AVVID net at the no office hours that I have configured in the time period.
I don't know if this is the right way to do it.
Could you help me?.

If you want to send all incoming calls to voice mail or another ext on non-business-hours please follow this procedure:
Lets assume that you want the phone to ring from 9 to 5:15 and the rest of the day and during the weekend it should go to voice mail or another extension, and that you have a range of extensions that you want to apply this configuration for, (3xxx).
1) configure time periods.
a) configure a time period, (ring hrs) from 9 to 5:15 from Monday to Friday.
b) configure a time period, (after hrs), from 5:15 to 00:00 from Monday to Friday.
c) configure a time period, (before hrs), from 00:00 to 8:00 from Monday to Friday.
d) configure a time period, (weekends), from 00:00 to 24:00 from Saturday to Sunday.
2) configure a time schedules.
a) configure a time schedule, (ring), and add the "ring hrs" time period.
b) configure a time schedule, (no ring), and add the "after hrs", the "before hrs" and the "weekends" time periods.
3) configure partitions.
a) configure a partition, (RingHrs), and add the time schedule "ring" to this new partition.
b) configure a partition, (NoRingHrs), and add the time schedule "no ring" to this new partition.
c) configure a partition, (PhoneTOD)
d) configure a partition, (CTI_TOD)
4) configure calling search spaces
a) add the partition "RingHrs" to the calling search spaces that would be able to reach the phone by checking the TOD, (you must apply this to the CSS of the GW if the TOD would apply for incoming calls, if the TOD would also apply for internal calls you must apply this to the CSS of the internal phones also)
b) add the partition "NoRingHrs" to the calling search spaces that would be able to reach the phone by checking the TOD, (you must apply this to the CSS of the GW if the TOD would apply for incoming calls, if the TOD would also apply for internal calls you must apply this to the CSS of the internal phones also)
c) add the partition "PhoneTOD" to the calling search spaces that would be able to reach the phone directly, without checking the TOD.
5) configure CTI
a) configure a CTI port or route point with an extension 3XXX, (or the extension itself, if this is for only 1 phone) and use the partition "CTI_TOD", configure the line as call forward all to the number you want to, (or check the CFA to voice mail checkbox)
6) configure translation patterns
a) configure a translation pattern, (3XXX), use the partition "RingHrs", and use a calling search space that has the partition "PhoneTOD" in it, (this would be the translation pattern that would be able to reach the phone).
b) configure a translation pattern, (3XXX), use the partition "NoRingHrs", and use a calling search space that has the partition "CTI_TOD" in it, (this would be the translation pattern that would NOT be able to reach the phone).
c) if you want to configure a 'bypass' for the TOD add a translation pattern, (1.3XXX), use partition none or another partition that can be reach by the user of this bypass, and use a calling search space that can reach the "PhoneTOD" partition.

How to disconnect incoming call when the phone is locked...!!?

I feel that the major bug in iOS 7 is, we cannot disconnect the incoming call when the phone is locked. I dont understand whats the reason behind not fixing this issue...! My iphone lock/unlock button is getting spoiled day by day as am using that button evert time to disconnect the incoming call when the phone is locked.
Apple, please give me the genune reason for not fixing this issue, else fix this ASAP.
Thanks.

https://discussions.apple.com/message/23151421#23151421

RFC adapter...How it handles multiple calls...

Hi folks
Basic doc'tation on RFC adapter states...qRFC is not supported..Agreed..
I have a scenario where I need to dump lot of transactions from a flat file to an RFC.
I have split the single structure by 1:n mapping(multi) and pushed each message using a Loop(For-each/Par-For-each) to RFC function..
Now question here..Is this a good approach to invoking RFC's(I find response times to be pretty slow on my server upto 20 secs for each RFC call). Cant I parallely execute all the messages by calling the RFC on SRM systems.(PAR for each loop has a limit of 999 loops)..Is there any other option you can suggest for this scene.?

chk this link
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
there is a recommendation on when to use parForEach. From what i understand , parForEach is helpful if u intend to send "One" Message to multiple receiver systems and intend to handle the responses in different context.I beleive it won't help if u send "different" messages to the same receiver system.
One more approach , i can think of is to make a Jco call from your "Message Mapping" itself using User defined functions instead of "configuring an RFC adapter" and "calling it in ccBPM". The below link should help on this.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/how to perform sap data lookups within xi mappings.
Good Luck
cheers
Saravana

How to display incoming caller numbers from india

I live in US. When some one calls from india, No caller ID is displayed on iphone. How to see the number. I already verified that the callers did not blocked their numbers from being visible.

I am using att. The number gets displayed on other att phones but not on iphone. This makes me believe that it should be problem with iphone.!

How to handle incoming call by means j2me

Similar Messages

Maybe you are looking for