How to get more than 1000 rec from Oracle?

Hi
i got this issue from 1 of my fnd.
can any one tell me how to over come this issue?
I need help in solving the issue
This is the oracle error coming when we try to export
the records to the excel sheet.
Macromedia][Oracle JDBC Driver][Oracle]ORA-01795:
maximum number of expressions in a list is 1000
This error is due to the limitation in oracle db list
query.
example:
select * from FEEDBACK_IN Where feedback_in.case_id
IN ( (param 1) , (param 2) , (param 3) , (param 4) ,
(param 5) , (param 6) , (param 7) , (param 8) , (param
9) , (param 10) , (param 11) , (param 12) , (param
13)……………………….(param
5000))
If the list exceeds 1000, we will get the following
error from the database. And there is a limitation in
oracle db to 1000.
We need to rewrite the query to avoid the list error
if the list exceeds more then 1000 records.

You must work with the guy who asked the same question
yesterday.
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=6&threadid=1149324&ente rthread=y

Similar Messages

How to get more than 256 bytes data

hello.
I use Schlumberger 32K Card�iJava Card 2.1�j.
Please tell me how to get more than 256 bytes data from the applet in the card!!
According to JCRE specification, need to use Get Response Command.
What is Get Response command?
Do I have to write processing of Get Response command to an applet?
Or JCRE processes Get Response command?
If knows, please tell me about!!
Thanks.

Thanks for your response!!
I understand that I have to write processing of Get Response command to an applet.
But case of Schlumberger 32K card, when host send Get Response command to an applet, card reply 6F-00!?
I'm investigating now, and it seems that response is returned before applet processes Get Response command(CLA = 00, INS = C0).
Do JCRE perform the process of Get Response command?

Any way to get more than 1000 characters in notes?

i was just wondering if there was any way to get more than 1000 characters in the notes section of the ipod. i have outlines for school and they are a lot longer than 1000 characters... i didnt know if there is a setting on itunes or the ipod or a hack or mod to make it more than 1000 character limit. thanks for the help

No.
You can use the iPod in Disk mode and copy the outlines in their native format (Word?) and put them on your own computer.

I am running a strain gage test and can't get more than 1000 samples

A formor employee left a strain gage VI that I am attempting to reuse but no matter what I do I can,t get more than 1000 samples before needing to restart the loop. In the task timing (of NI-DAQmx) I have set the acquisition mode to N Samples and the clock settings to read 65000 samples at 25 Hz. There is a DAQmx timing(sample clock) VI that resets to finite samples and 1000 per channel when I close it but I have reset it to 65500 continious samples and left it open to no avail. There is a rate input to this sample clock on the front window that I have tried setting to several different rates to no avail. The Vi will run about 15 seconds, collect 1000 samples and then ask to verify the file location to save the data to. Upon verifying the file location the VI will run another 15 sec. loop before stopping for verification again.
If the loop is stopped rather thanhaving the file verified an error is listed:
Error-200278 occurred at DAQmx Read (Analog 1d WFm NChan NSamp).vi:1
The given possible reason given is: attempted to read a sample beyond the final sample acquired.
When I stop attempting to run the VI the block diagram opens with a dark block around file creation block. I need this VI to run for 10 min. collecting samples at about 25/sec. Can someone help me figure out what I am doing wrong?
I have made screen shots of the VI and the error code to assist finding the incorrect programing.
Thank you for your help.
Jim Steinmeyer
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
strain test error.doc ‏493 KB

Thank you,
I was just thinking about being able to increse the size of the doc. for better visability. I have tried working with the rate input for the DaQmx for the sample clock and it does change the frequency of sampling, but I still get just the 1000 samples. I have included Jpegs this time. I have tried to exppand the two DAQ assistants that arn't expanded but am unable to, I also am unable to find a "propertys" command to open them up and see what exactly they do. The nested while loop for output also seems strange to me. Maybe I would be better to attempt a new program but being new to the language I thought using an existing program might be best.
Jim
Jim Steinmeyer
Design Engineer
Reinke Mfg.
PO 566
Deshler NE 68340
[email protected]
Attachments:
block diagram.JPG ‏134 KB
DAQmx.JPG ‏129 KB

How can i get more than 1000 items in Custom List Displaying Items?

http://.....sites/_vti_bin/listdata.svc/AddressBook(List) allows 1000 items Only my AddressBook List, but i have more than 1000 items in my AddressBook list. I want to get items
from AddressBook list and bind in another place using Autocomplete method like this.
=======>>>>listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook.
and my coding in camel like below
protected void btnpopulatedetails_Click(object sender, EventArgs e)
SPSite objSite = SPContext.Current.Site;
SPWeb objWeb = objSite.OpenWeb();
objWeb.AllowUnsafeUpdates = true;
SPList list = objWeb.Lists["Address Book"];
SPQuery query = new SPQuery();
query.QueryThrottleMode = SPQueryThrottleOption.Override;
query.Query = "<Where><Eq><FieldRef Name='Title'/><Value Type='Text'>" + txtcustomer.Value + "</Value></Eq></Where>";
query.RowLimit = 500;
SPListItemCollection items = list.GetItems(query);
function fnCustomerSearchBind() {
if ($("input[id$='txtcustomer']").length != 0) {
var collcustomer = searchCustomers('', urlTo, fieldto);
$("input[id$='txtcustomer']").autocomplete({
source: collcustomer,
//maxLength:10,
select: function (event, ui) {
//debugger;
event.preventDefault();
$("input[id$='txtcustomer']").val(ui.item.value);
$("input[id$='btnpopulatedetails']").click();
return false;
minLength: 0,
function searchCustomers(value, listurl, fieldto) {
var collcus = new Array();
var custresults;
var url =listurl + "?$filter=startswith('" + fieldto + "','" + value + "')";
//debugger;
$.ajax({
cache: true,
type: "GET",
async:false,
dataType: "json",
url: url,
success: function (data) {
custresults = data.d.results;
//alert(listurl);
// alert(data.d.results);
for (var x = 0; x < custresults.length; x++) {
//alert(custresults[x]['To']);
collcustList.push(custresults[x]['To']);
//debugger;
//debugger;
return collcustList;
In my research listurl=http://.....sites/_vti_bin/listdata.svc/AddressBook has 1000 items in 1st Page by default, So how to change 1st Page by default to All Pages through
code. I think you understand my environment by look above coding, if you don't I am using office 365 sandbox solution. One more thing i know through my research Pages can be change by using Ado.Net Data Service, i tried this one but this one support windows
server 2008 r2 only but i am using Windows Server 2012 r2. Please help me if you know the answer.

Hi,
Here is a blog would be helpful:
ADO.NET Data Services returns 1000 items
https://gilleslauwers.wordpress.com/2010/12/08/ado-net-data-services-returns-1000-items/
Best Regards,
Dennis Guo
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to return more than one value from a function

hello everybody,
Can anyone tell me how to return more than a single value from a function, the problem is i have 4 points,
2 points form one line ,another 2 points form 2nd line ,each point is 3 dimensional(x,y,z coorinates) so i will pass these values to func(x1,y1,z1,x2,y2,z2,x3,y3,z3,x4,y4,z4), i will find the point of intersecton of two lines and i will get it as x,y,z , now how to return these 3 coordinates,usually the function returns only one value, please help me to solve it out.
Thanks.

I think the easiest way or trick here is (easiest isn't always the best as we know, but atleast this one will work) to create simple data array. and pass that. Create an array with:
<code>
class justArray {
int x=0
int y=0;
int z= 0;
...somewhere
justArray[] points= new justArray[4];
points[0].x= ..
points[0].y= ..
points[0].z= ..
points[1].x= ..
return points[]
</code>

How to pass more than 1000 entries in 'IN' clause, Oracle 11g

Hi All,
I know this is a very common question in Oracle discussion forum. But, Im in different zone.
I use C#, .NET and Oracle 11g. I have a situation where I will create a query statement using 'IN' clause in C# code based on my requirement and execute that statement from code itself with oracle connection object. I do not have any procedures. I must phrase my query statement and pass it on to OracleConnection object to execute it.
My code looks like this....
List<decimal> x_Ids = new List<decimal>();
I will load my IDs into x_Ids here;
string whereInClause = ........I will prepare a 'IN' clause (All IDs separated by ',')
My query would looks like this....
string query = select * from MYTABLE where X_ID in [ whereInClause with more than 1000 entries]
oraConn.ExecuteQuery(query);
I have a workaround with OR operator with 'IN' clause like below.
X_ID in [ Ids till 1000 entries] OR X_ID in [Next 1000 entries] OR X_ID in [Next 1000 entries] ....so on.....
It is working, but, I heard that this may slowdown the performance of the application. Is this really a performance hit to my application?
Can you please suggest any other workaround to overcome this situation?

>
I have a workaround with OR operator with 'IN' clause like below.
X_ID in [ Ids till 1000 entries] OR X_ID in [Next 1000 entries] OR X_ID in [Next 1000 entries] ....so on.....
It is working, but, I heard that this may slowdown the performance of the application. Is this really a performance hit to my application?There should be no performance difference between a statement like
select * from myTab
where ID in (1,2,3,4,5)
OR ID in (6,7,8,10,12) and
select * from myTab
where ID in (1,2,3,4,5,6,7,8,10,12) The execution plan should be identical.
However those values might better be send as a single object (collection or table of numbers type).
I think the ODP or OO4O connectivity allows to create and such oracle object types.
Another way could be to think about how all the values are created? Did any user enter them manually? Certainly not. Then maybe you can apply the same logic to the SQL statement that created those values in your .Net application.
something like
select * from myTab
where ID in (select t2.FK_ID from otherTab t2 where t2.Col1 = 100) This approach would probably beat all others performancewise. Since you avoid the overhead of constructing the in-lists.

How to import more than 2k items from Excel(2010) to SharePoint 2010 List?

Hi,
I am getting error while importing more than 2k items from Excel to SharePoint List.
Need solution!!

Hi.
Try to use the Import Spreadsheet list template to import your data.
http://www.dummies.com/how-to/content/import-a-spreadsheet-as-a-list-in-sharepoint-2010.html
Regards,
Bubu
http://zsvipullo.blogspot.it
Please mark my answer if it helped you, I would greatly appreciate it.

How to email more than one photo from camera roll

How do e-mail more than one photo from the camera roll at a time?

Go to the camera roll, open the thumbnails, click on the arrow in the top right, select up to 5 photos, click on share in the top left and select email.

How to delete more than one workbook from command line

Hi, I'd like to delete more than one workbook from command line:
The following syntax, it doesn't work....but I followed the manual instructions:
dis51adm.exe /connect eul/eul@uatdb /delete /workbook "ALE_TEST_1, ALE_TEST_2" /eul eul /log D:\Ale\delete.log
where:
eul/eul@uatdb: is the db’s schema/user where the EUL is installed;
/delete "ALE_TEST_1, ALE_TEST_2": is the command to delete the workbooks, specified inside the “” (with the relative path)
/log D:\Ale\delete.log: is the command to write a log’s file named “delete.log” to track the action
The log file says:
22/4/2008 4:00:26 μμ
dis51adm.exe /connect /delete /workbook ALE_TEST_1, ALE_TEST_2 /eul eul /log D:\Ale\delete.log
Document ALE_TEST_1, ALE_TEST_2 not found in EUL.
Internal EUL Error: ObjectNotFound - Can't find EUL element
There are 0 eul elements to be deleted.
Completed deleting eul elements.
22/4/2008 4:00:29 μμ
Anyone can tell me how is the right syntax ?
Thanks in advance
Alex

Hi Rod
I was coming to that conclusion myself but wanted to wait until the other avenues had been exhausted first - aka making sure of the workbook names.
I checked through all of the command line documentation and read nothing which clearly indicated that only one workbook could be processed at a time, other than the fact that the syntax says workbook and not workbooks, which could be a big clue.
I think you are right though in that it has to be one at a time, which would be a pain.
Best wishes
Michael

How to create more than 1000 entitie in FDQM

Hi Gurus
1.How to load locations to FDQM without manual Entry?
Can we load locations by using flat files?
Requirement: I have to create more than 1000 entities in FDM Application for mapping Target in HFM Application.
How to achieve this?
regards
Dev

Two things :
#1 - The tables you need to add data to are : tPOVPartition, tStructPartitionHierarchy, tStructPartitionLinks. The first table is the basic location information. The last two tables define the relationship hierarchy of where the locations belong. I would expect that if the Strcut information is missing, FDM will not be able to place it anywhere on the locations screen.
Additionally, for the tPOVPartition, there is required information and you need to make sure you are including all of that info when you create your record.
#2 - If you are handy at coding, I'm positive there is an API call to create a location. It would make more sense perhaps to write a script that uses the APIs to create the locations so that you can be sure that it is being done right.

How To Get more than one Return Values in LOV ADF

In ADF LOV, I can get only one return value;
How can I Get more than one values like in Oracle Form?
SomeOne can help me?
Thanks

you may add more <set> tag like the following:
<event name="lovSelect">
<set property="inputValue" value="${bindings.Id.inputValue}" target="${data.work_workBusinessViewUIModel.buyCompanyId}"/>
</event>
or you can implement your Action

Getting more than 10 episodes from a podcast

I'd love to be able to download more than 10 episodes from http://www.rzim.org/let-my-people-think-broadcasts/feed/
I only get 10 at a time. Is there a way to do this?
If I subscribe to the same podcast through one place.com, http://www.oneplace.com/ministries/let-my-people-think/subscribe/podcast.xml
It gives me many more than 10 episodes.
These 2 podcasts can be found typing in Ravi Zacharias to the podcast search window in iTunes store. The copied url links above don't seem to work.
Message was edited by: David Stembridge

iTunes should let you download all the available episodes. If you can only get them "10 at a time", perhaps the limit is being set by the computer that is sending the podcast feed? They may be doing it to restrict the load on their system, but that's just a guess.

How to restrict more than one delivery from one sales order.

Hi Guys,
We have a requirement that is, system should not allow more than one delivery from one sales order no even if when there is some line item still to be delivered.
We want only one delivery for one sales order and rest of line items should be treated as rejected.
Kindly help
Thanks in advance,
Balu

Hi MP,
Its also not working as we have the requirement is that once sales order is saved and one delivery is created then again if we are adding some more item inthe same sales order then system should not allow to create delivery document as one delivery already created.
Thanks,
Balu.
Edited by: Balu Sajja on Aug 30, 2010 1:29 PM

How to get more than 300 results for a search

Hi all,
When we search for something in a peoplesoft, we get 300 default results right.
Is there a way we can change that to 500 or 600 or any.
Please help me.
Thank you,
Bye.

I heard that we have to do some settings in psappserv.cfg file to get more than 300 rows in a search. Is that true?
Please help me.
Thank you,
Bye.

How to get more than 1000 rec from Oracle?

Similar Messages

Maybe you are looking for