How to get my Addon to work with the license key?

Hi,
Can someone tell me how to get the Addon to work with the license key?
I've follow the steps as stated in this thread:
[Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
1) i've registered a BASIS key and get a 'BASISXXXXXX" string
2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the Add-On Indentifier Code
3) then i paste the string to my source code
which is the "XXX" of the sample code in that thread.
static string AddonIdentifierString="XXX";
int lRetCode=0;
int errCode=0;
string errMsg= string.Empty;
string connectionStr ="";
link = new SAPbouiCOM.SboGuiApiClass();
connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
link.AddonIdentifier=AddonIdentifierString;
link.Connect(connectionStr);
oApp = link.GetApplication(-1);
vCompany = new SAPbobsCOM.CompanyClass();
string cookie = vCompany.GetContextCookie();
string conStr = oApp.Company.GetConnectionContext(cookie);
vCompany.SetSboLoginContext(conStr);
lRetCode = vCompany.Connect();
4) then i add my add-on using manager role at Add-on admin
5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
what steps did i miss? Can someone please advise? Thanks
ps : i'm coding in VB

Hi,
i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
I hope it helps.
Best regards

Similar Messages

How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"

How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?

While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

How to get custom graphics to work with the animator object

I Have a costom graphic that I wish to have change color depending the position of a Pot, and have tried using the animator object. However the animator object fails to change color when the pot is moved, when i replace the costom graphic with a standard one (a pipe) the color changes perfectly. The costom graphic is in wmf format so it should work. what am i doing wrong or is this just not possible?

Hello,
That's a little odd. Did you trying playing with the Gray Proximity settings? If it's not too difficult maybe you can create various colored versions of your graphic and use the Multistate object instead.
Is it possible to post the picture here so we can try?
Regards,
Khalid

HT3310 how do i get my headphone to work with the iphone?

how do i get my headphone to work with the iphone? Are there some settings
that I need to turn on so I can use my headphone while talking on the phone?

Are you using the earbuds that came with the iPhone? If you are using other earphones, it's possible that they need an adaptor to work with the iPhone's recessed headphone jack.

Update to kichat: FAQ 2 - How to get my router to work with iChat?

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008

How to get this script to work with different browser

Do you guys know how to get this script to work with mozilla firefox?
do shell script "open -a safari 'https://login.binck.nl/klanten/Login.aspx?ReturnUrl=%2fklanten%2fdefault.aspx'"
tell application "Safari"
activate
          tell document 1
                    repeat until ((do JavaScript "location.host") is "login.binck.nl")
                              delay 1
                    end repeat
do JavaScript"document.getElementById('ctl00_Content_Gebruikersnaam').value='sim';document.ge tElementById('ctl00_Content_Wachtwoord').value='password';window.open(document. g etElementById('ctl00_Content_LoginButton').href, '_self', 'true');"
          end tell
end tell
Thank you so much in advance:)

That isn't possible. Firefox's AppleScript dictionary doesn't contain anything which can be used to manage JavaScripts.
(63741)

Is there an adapter can i get so square will work with the otterbox i have on my iphone

Is there an adapter can i get so square will work with the otterbox i have on my iphone, I love the otterbox and want to keep it on all the time. not only does it protect my iphone it, it makes it easy for me to hold because I have trouble with my hands. please help

That's a good question. The main problem with the Square readers is that the plug is designed to send data to devices, rendering most headphone extension cables useless.
Reading another forum I saw this: http://www.amazon.com/gp/product/B001BN7XSM
Give that a try. Claims to work perfectly for Square. NOT headphones.

How to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?

You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How to get exact match when working with Oracle Text?

Hi,
I'm running Oracle9i Database R2.
I would like to know how do I get exact match when working with Oracle Text.
DROP TABLE T_TEST_1;
CREATE TABLE T_TEST_1 (text VARCHAR2(30));
INSERT INTO T_TEST_1 VALUES('Management');
INSERT INTO T_TEST_1 VALUES('Busines Management Practice');
INSERT INTO T_TEST_1 VALUES('Human Resource Management');
COMMIT;
DROP INDEX T_TEST_1;
CREATE INDEX T_TEST_1_IDX ON T_TEST_1(text) INDEXTYPE IS CTXSYS.CONTEXT;
SELECT * FROM T_TEST_1 WHERE CONTAINS(text, 'Management')>0;
The above query will return 3 rows. How do I make Oracle Text to return me only the first row - which is exact match because sometimes my users need to look for exact match term.
Please advise.
Regards,
Jap.

But I would like to utilize the Oracle Text index. Don't know your db version, but if you slightly redefine your index you can achieve this (at least on my 11g instance) :
SQL> create table t_test_1 (text varchar2(30))
2 /
Table created.
SQL> insert into t_test_1 values ('Management')
2 /
1 row created.
SQL> insert into t_test_1 values ('Busines Management Practice')
2 /
1 row created.
SQL> insert into t_test_1 values ('Human Resource Management')
2 /
1 row created.
SQL>
SQL> create index t_test_1_idx on t_test_1(text) indextype is ctxsys.context filter by text
2 /
Index created.
SQL> set autotrace on explain
SQL>
SQL> select text, score (1)
2    from t_test_1
3   where contains (text, 'Management and sdata(text="Management")', 1) > 0
4 /
TEXT                             SCORE(1)
Management                              3
Execution Plan
Plan hash value: 4163886076
| Id | Operation                   | Name         | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT            |              |     1 |    29 |     4   (0)| 00:00:01 |
|   1 | TABLE ACCESS BY INDEX ROWID| T_TEST_1     |     1 |    29 |     4   (0)| 00:00:01 |
|* 2 |   DOMAIN INDEX              | T_TEST_1_IDX |       |       |     4   (0)| 00:00:01 |
Predicate Information (identified by operation id):
   2 - access("CTXSYS"."CONTAINS"("TEXT",'Management and
              sdata(text="Management")',1)>0)
Note
   - dynamic sampling used for this statementJust read that you indeed mentioned your db version in your first post.
Not sure though if above method is already available in 9i ...
Message was edited by:
michaels

How to get LG G3 to work with SYNC in FORD F150

Is there something different i should be doing to get lg g3 to work in my f150 for handsfree calls used sync shpplemental guide to get it to work no results please provide detailed instructions or a link to get instructions

Hi Ed, I think you will need to check with Ford support on this.
When I look at the device compatibility page, Ford says the regular SYNC works with the G3 a bit differently depending on the carrier:
Works on AT&T, Sprint, T-Mobile and Verizon:
Automatic Phonebook Download
Caller ID
SMS Text Messaging
Call History Download
Bluetooth Audio Streaming
Transfer to Privacy
Works on AT&T, T-Mobile and Verizon:
Join Calls
You should be able to find steps for your vehicle here: http://owner.ford.com/how-tos.html
Note: Firefox Sync is different, it copies data between Firefox on your desktop and Firefox on your Android device and doesn't connect to your vehicle.

How to get my custom controller updated with the global custom controller?

Hi all,
I'm new to CRM Web UI and need some advice from the expert. Currently I'm working on component ICCMP_BT_DATES and noticed something weird with this component. When this component is first launch it display the dates of a service ticket correctly. However when I navigate to another screen, save a new ticket and back, the dates are not reflected. When I went in and debug the component, I noticed that the context is still tied to the previous ticket. I think the custom controller is not updated with the latest from the global custom controller.
My question is how do I get my custom controller updated with the latest.
Regards,
Ricky

You have to bind your custom controllers context node to the event NEW_FOCUS of the collection wrapper on the global custom controller.
Best place to do this might be the CONNECT_NODES of the context of your custom controller.
Get the global CuCo with GET_CUSTOM_CONTROLLER() and then the appropriate context node. Now:
SET HANDLER yourMethod for lr_global_cuco->typed_context->thecontextnode->collection_wrapper activation iv_activate.
Of course you have to implement a method similar to ON_NEW_FOCUS as it is on many other nodes.
cheers Carsten

How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview

The drivers for your HP Inkjet Printer are already included in the new Windows 8 Consumer Preview!
You do not need to download drivers to use the product. Keep reading to learn how to install the print driver included in Windows 8 Consumer Preview with your HP printer.
Getting started in Windows 8 Consumer Preview
HP designed a quick and easy tool that helps you find the best driver for your printer in Windows 8 Consumer Preview: the HP Printer Install Wizard.
Download Printer Install Wizard for Windows 8 Consumer Preview
NOTE:The HP Printer Install Wizard is not available for all printer. This tool is available only for Windows 8 Consumer Preview. The HP Printer Install Wizard works with products connected with a USB cable or with a wired (Ethernet) or wireless network connection. If you would like to connect your product wirelessly, but it is not yet on a wireless network, you need to temporarily connect the product with a USB cable to run the wizard.
Step one: Download the HP Printer Install Wizard
1.   Click the following link to download the Printer Install Wizard:
HP Diagnostic Utilites
2.   When the tool finishes installing, click Finish. The wizard opens automatically.
Step two: Run the HP Printer Install Wizard
1.   Press the Power button to turn on the printer, if it is not already on.
2.   Connect the USB cable to the HP printer and to the computer, if it is not already connected.
3.   Make sure that your computer has an internet connection. The wizard must access the internet to work correctly.
4.   Click Next to begin the utility. The wizard displays a list of detected printers.
5.   If the wizard detects more than one printer, select your HP printer from the list.
6.   The wizard automatically displays the best available driver for your HP printer.
If a full feature driver is available, the wizard detects it. Click Next to download and install the software. For full functionality, HP recommends installing the full feature driver if it is available.
If an included print driver is available, the wizard explains that the driver is already installed. It will also supply a link to more information about using an included driver.
JonW
I work for HP

This is GREAT! My printer has print drivers available.
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

How to get ASF format to work with FCP

I have a Neuros 442 DVR that I’m trying to pull footage from and play in Final Cut Pro. The thing is that the format that the DVR records in is ASF and Final Cut Pro will not read that. I have put it in a Windows (yes I know I’m sorry) and it would read it but would not convert it without hesitations it the video. If anyone knows how to do this pleas let me know thanks.
Villi Olafsson

i did what you said and dowloaded that from flip4mac and it worked on letting the ASF files work with quicktime but the other thing that we are having a problum with is the glitching in the clips after convertion. (we need to conver to MOV from ASF and we are getting hesatations in the clips. which our clients will not like at all. if you now anything else that would help me out that would be great thanks
Villi O.

How To: Get Your Creative Zen Working With Vis

I am an owner of the now outdated Zen 20gb HD0005. Upgraded to Vista Business recently and have not been able to get the player working, the installation cd wouldnt work and neither would the updates at uk.creative.com There is a way! Go to http://us.creative.com/support/downl...ame=Windows+XP (from the US Creative download archi'ves), download the driver to your desktop or where ever. The driver is originally for XP, however, once it is downloaded right click the setup file and select properties. In the new window go to the Compatibility tab and select: Compatible with Windows XP Service Pack 2And, at the bottom, check that the box next to 'Run As An Administrator' is also ticked. Click Apply and then OK and run the setup. It should now (at 67% through the installation) update drivers (this may seem to hang, please be patient!) and then will ask you to reconnect your player. Unplug it, click ok, then plug it in at the end of installation, go to my computer and you should hopefully see that your Zen is under 'Other Devices' I hope this is help to some of you with the same problems as I had!

it seems that it now detects the player but wont run in organiser, only in Explorer. Only thing i can think of is burning songs to disc and then adding them to comp again, unless anyone else has any suggestions?

How to get remote ejb client working with Weblogic 8.1?

I have Weblogic 8.1 running on a WinXP box behind my firewall. Port 7001 is open to WL and remote browsers can access the console.
I have a client machine running WinXP on a different network that is remote to the WL server. It can ping the WL server machine.
I use JVM 1.4.2_08 on all machines.
If I put my client machine on the LAN with the WL server, then my EJB test client works fine. If I put the client machine on the remote network then the test client fails with a ClassCastException when trying to do a PortableRemoteObject.narrow on the bean home.
I had this running fine on JBoss 3.22 using RMI over HTTP. I added an HTTP invoker service to my jboss.xml file. I don't know if something similar is needed on the Weblogic side - any ideas on that? All I've done on the WL side is turn on Tunneling - which obviously works because the remote client gets a correct home object when doing a lookup on the bean - based on the IOR string of the home obj.
Below I include my client code, exception, ejb-jar.xml and my weblogic-ejb-jar.xml.
Any ideas on what else needs to be done so that a remote client can do a PortableRemoteObject.narrow? My client.jar has all of the EJB classes, and runs fine when run from LAN.
Thanks,
--BobC
Client Code
Properties p = new Properties();
p.put("java.naming.factory.initial", "weblogic.jndi.WLInitialContextFactory");
p.put("java.naming.provider.url", "http://66.114.140.213:7001");
InitialContext ic = new InitialContext(p);
// Test register bean
Object homeObj = ic.lookup("tacplanner/register");
RegisterHome home = (RegisterHome) PortableRemoteObject.narrow(homeObj, RegisterHome.class); // <<< ClassCastException here
Exception
java.lang.ClassCastException
at com.sun.corba.se.internal.javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:293)
at javax.rmi.PortableRemoteObject.narrow(PortableRemoteObject.java:134)
at com.nimblus.tacplanner.test.TestUtils.<init>(TestUtils.java:60)
at com.nimblus.tacplanner.test.TestUtils.main(TestUtils.java:196)
ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC '-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN' 'http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd'>
<ejb-jar>
<enterprise-beans>
<session>
<ejb-name>register</ejb-name>
<home> com.nimblus.tacplanner.server.ejb.stateless.RegisterHome</home>
<remote> com.nimblus.tacplanner.server.ejb.stateless.Register</remote>
<ejb-class>com.nimblus.tacplanner.server.ejb.stateless.RegisterSession</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<description>The Oracle Datasource</description>
<res-ref-name>java:/OracleDS</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>register</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>Required</trans-attribute>
</container-transaction>
</ejb-jar>
weblogic-ejb-jar.xml
<?xml version="1.0"?>
<!DOCTYPE weblogic-ejb-jar PUBLIC
'-//BEA Systems, Inc.//DTD WebLogic 8.1.0 EJB//EN'
'http://www.bea.com/servers/wls810/dtd/weblogic-ejb-jar.dtd'>
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>register</ejb-name>
<stateless-session-descriptor>
<pool>
<max-beans-in-free-pool>100</max-beans-in-free-pool>
</pool>
</stateless-session-descriptor>
<reference-descriptor>
<resource-description>
<res-ref-name>jdbc/OracleDS</res-ref-name>
<jndi-name>OracleDS</jndi-name>
</resource-description>
</reference-descriptor>
<enable-call-by-reference>True</enable-call-by-reference>
<jndi-name>tacplanner/register</jndi-name>
</weblogic-enterprise-bean>
</weblogic-ejb-jar>
--------------------

Problem solved.
For remote clients you need to generate and use the stub classes for EJB interfaces using Weblogic's appc utility.
See: "http://e-docs.bea.com/wls/docs81/ejb/appc_ejbc.html#1151900"
--BobC

How to get my Addon to work with the license key?

Similar Messages

Maybe you are looking for