How to get my custom controller updated with the global custom controller?
Hi all,
I'm new to CRM Web UI and need some advice from the expert. Currently I'm working on component ICCMP_BT_DATES and noticed something weird with this component. When this component is first launch it display the dates of a service ticket correctly. However when I navigate to another screen, save a new ticket and back, the dates are not reflected. When I went in and debug the component, I noticed that the context is still tied to the previous ticket. I think the custom controller is not updated with the latest from the global custom controller.
My question is how do I get my custom controller updated with the latest.
Regards,
Ricky
You have to bind your custom controllers context node to the event NEW_FOCUS of the collection wrapper on the global custom controller.
Best place to do this might be the CONNECT_NODES of the context of your custom controller.
Get the global CuCo with GET_CUSTOM_CONTROLLER() and then the appropriate context node. Now:
SET HANDLER yourMethod for lr_global_cuco->typed_context->thecontextnode->collection_wrapper activation iv_activate.
Of course you have to implement a method similar to ON_NEW_FOCUS as it is on many other nodes.
cheers Carsten
Similar Messages
-
how to get list of active users with the details like samaccountname, name, department, job tittle, email in active directoy?
You can use third party software True Last Logon 2.9.You can export the file in excel for report creation.You can use the trial version this will achieve what you are looking for.
True Last Logon displays the following Active Directory information:
--Users real name and logon name
--Detailed account status
--Last Logon Date & Time
--Last Logon Timestamp (Replicated value)
--Account Expiry Date & Time
--Enabled or Disabled Account
--Locked Accounts
--Password Expires
--Password Last Set Date & Time
--Logon Count
--Bad Password Count
--Expiry Date
--You can also query for any other attribute (Example: Description, telephone Number, custom attibutes etc)
Refer the below link for trial version:
http://www.dovestones.com/products/True_Last_Logon.asp
Best Regards,
Sandesh Dubey.
MCSE|MCSA:Messaging|MCTS|MCITP:Enterprise Adminitrator |
My Blog
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
HT5422 How to get an better screen-update? The view on the remote Mac is nearly static.
How to get an better screen-update? The view on the remote Mac is nearly static.
You can try reducing the bit depth of the screen image via the slider in the upper-right of the Control window. If that doesn't help, you may just not have a sufficiently fast network connection to correctly handle the data transfer necessary. This is often the case if you're connecting across the Internet. What is your network speed between the administration system and the client?
Regards. -
How to get online apps to work with the Verizon DSL modem firewall set at "Medium" level, not "Low?"
How to get online apps to work with the Verizon DSL modem firewall set at “Medium” level? Xbox 360 Live, FTP, and the Windows sntp Time checker native to Windows XP WON’T WORK unless the Verizon firewall is first reset down to “Low.” Then all works well, but I then risk low firewall protection. Setup: · Westell 6100 DSL modem (Software Version: VER:4.04.03.00 Transceiver Revision: 7.2.3.0 Model Name: C90-610015-06), · D-Link DIR-655 wireless router (Hardware Version: A3, Firmware Version: 1.21), For Xbox 360 Live the “canned” port forwarding rule for provided in Verizon’s drop-down list for the Westell 6100 modem forwards ports 88 and 3074 for both TCP and UDP. This does not meet Microsoft’s forwarding recommendations for Xbox 360 Live stated at http://support.microsoft.com/kb/908874. Instead, for the Verizon modem (Westell) I made a new port forwarding rule to comply with those Microsoft instructions. It forwards ports 53, 80 and 3074 for TCP and ports 53, 88 and 3074 for UDP. These same ports are also forwarded in the D-Link router configuration. For FTP, port 21 is also forwarded for TCP and UDP in both modem and router. But they don’t work until I first cripple the Verizon firewall down to “Low.” How to get them to work with the Verizon firewall up to Medium?
While I do not know the answer to your question, BUT since you have this modem and another router - you could just follow.
http://www.dslreports.com/faq/13600
^^
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button. -
How to get BU, Company, Group details with the help of Employee number
Hi Friends,
How to get information related with Employee like Business unit, Company, Business Group and other details.
PravinYes Arul.
I want to get these information in a custom Java webdynpro application but if you can guide me how to get these values in SAP-Hr. Can you just give me details of tables. I have Employee number(pernr) with me and want to fetch Group, Company, Business Unit.
With rgds,
Pravin -
How to get my Addon to work with the license key?
Hi,
Can someone tell me how to get the Addon to work with the license key?
I've follow the steps as stated in this thread:
[Re: SBO 2005 A - How do I get a Connection string from SAP B1.|Re: SBO 2005 A - How do I get a Connection string from SAP B1.]
1) i've registered a BASIS key and get a 'BASISXXXXXX" string
2) then i paste my BASIS key in "Solution" of Add-On Indentifier Generator and generate the Add-On Indentifier Code
3) then i paste the string to my source code
which is the "XXX" of the sample code in that thread.
static string AddonIdentifierString="XXX";
int lRetCode=0;
int errCode=0;
string errMsg= string.Empty;
string connectionStr ="";
link = new SAPbouiCOM.SboGuiApiClass();
connectionStr =Environment.GetCommandLineArgs().GetValue(1).ToString();
link.AddonIdentifier=AddonIdentifierString;
link.Connect(connectionStr);
oApp = link.GetApplication(-1);
vCompany = new SAPbobsCOM.CompanyClass();
string cookie = vCompany.GetContextCookie();
string conStr = oApp.Company.GetConnectionContext(cookie);
vCompany.SetSboLoginContext(conStr);
lRetCode = vCompany.Connect();
4) then i add my add-on using manager role at Add-on admin
5) then i can see my add-on there. it not suppose to be there since i've not installed any of my add-on license for my own add-on.
what steps did i miss? Can someone please advise? Thanks
ps : i'm coding in VBHi,
i think you have to change the license file attributing the number of licensing for your addon, then download it from https://websmp202.sap-ag.de/smb and then install it on SAP License manager, then I think you should give the license for your addon for individual users (example manager)
I hope it helps.
Best regards -
How to get most recent consecutive records with the same value
Hi,
Can someone please help me to solve my problem?
Below is my table
Prod_Code-----Purchase_date---Inv_number-------Inv_amt
MS_AV16850------18/01/2005-----------6575947----------------7.93
MS_AV16850------22/07/2005-----------7034012----------------51.82
MS_AV16850------04/01/2006-----------8719618----------------51.82
MS_AV16850------20/06/2006-----------9515864----------------104.69
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
MS_AV16850------06/01/2008-----------1653821----------------65.49
MS_AV16850------22/02/2009-----------10866311----------------189.29
I want my query to show the rows that has most recent purchase dates with same amount in consecutive purchase date.
So from the table above, the query should display:
Prod_Code-----Purchase_date---Inv_number-------Inv_amt
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
It should not get
MS_AV16850------16/04/2007-----------10353759----------------189.29
MS_AV16850------30/05/2007-----------10689899----------------189.29
MS_AV16850------22/02/2009-----------10866311----------------189.29
because inv_number 10866311 has a prvevious inv_amount of 65.49.
and not get this
MS_AV16850------22/07/2005-----------7034012----------------51.82
MS_AV16850------04/01/2006-----------8719618----------------51.82
because they are not the most recent purchase date even if they have the same inv_amount.
Thanks in advance.Hi,
You're right; thanks for catching my mistake.
I changed the WHERE clause of the main query (including subquery there) to deal with that situation:
WITH got_grp AS
SELECT x.*
, ROW_NUMBER () OVER ( ORDER BY purchase_date )
- ROW_NUMBER () OVER ( PARTITION BY inv_amt
ORDER BY purchase_date ) AS grp
-- , ROW_NUMBER () OVER ( ORDER BY purchase_date ) AS r1
-- , ROW_NUMBER () OVER ( PARTITION BY inv_amt
-- ORDER BY purchase_date ) AS r2
FROM table_x x
SELECT * -- Or list all columns except grp
FROM got_grp
WHERE (inv_amt, grp) IN (
SELECT MAX (inv_amt) KEEP (DENSE_RANK LAST ORDER BY MAX (purchase_date))
, MAX (MAX (grp))
FROM got_grp
GROUP BY grp
, inv_amt
HAVING COUNT (*) > 1
;Thanks, too, for posting the sample data. Apparantly, you're more interested in solving this problem than OP is.
Edited by: Frank Kulash on Nov 22, 2010 1:36 PM
The r1 and r2 columns are not needed for the solution. You may want to display them, just to help see how the query works. -
Update to kichat: FAQ 2 - How to get my router to work with iChat?
kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008kichat: FAQ 2 - How to get my router to work with iChat? December 2008 version 3
(Note to Hosts. to be removed on acceptance. Please use this to replace http://discussions.apple.com/thread.jspa?threadID=121775 )
Getting your router started with iChat.
Appropriate for using iChatAV 2 upwards. Edits have been made for iChat 4
Glossary for this FAQ
Routers: Any configurable device that sits between your computer and the internet link you have. This includes Modems that Route as well as "routers"
Routers seem to fall into two categories
Those that work straight from the box. See Apple Article HT1787
NOTE :This Article has not been updated in content since Jan 04 Only being changed to an Article from the Previous Doc listing
Even then some list that they need tweaks.
and those that do not.
This post will deal with what you may need to look at.
First off make sure your device is acting as a DHCP server. (if you are already on the internet you may not have to bother with this.)
Check in the Tiger System Preferences > Network Preference Pane, in the "Built in Ethernet" option from the "Show" drop down list.
In Leopard the Networks are listed on the left with icons. The Airport Option will need you to access the Advance Button for the Next bit.
Make sure the TCP/IP tab is the 'front' one. You should be able to see Configure IPv4 and it most likely reads Using DCHP. Make a note of your IP address. It will start 10.xxx.xxx.xxx or 192.168.xxx.xxx (the 'x' s will stand for any number between 1 and 255). The range 172.16.xxx.xxx is also a possible value at this point. Rarely used, but it is part of the RFC for Address Allocation for Private Internets.
Your router is most likely to be configurable from your browser. You will need to find the IP address to type into the browser from any Readme or PDF files that came on the install disk or visit the makers website and download a manual.
The Port Forward.com site lists many devices and clicking on one will take you to a list of Applications. This iChat will open an page that will start by telling you the defaults to access the device
Opening or Allowing ports. Several Methods not all devices have all of them.
DMZ (Demilitarised Zone)
This is a less secure setting that basically opens all ports and points the incoming data to your computer. (not helpful if you have more than one computer on your LAN). It can be considered as an extreme form of Port Forwarding
Port Forwarding (also Virtual Server or Pin Holes)
These settings are usually found in an Advanced setting.
You may need to set an incoming IP address (Usually 0.0.0.0 to any outside server), a port that data will arrive on, the Inside computer's IP address (your computer) and the port it will deal with the data on and the protocol it will use.
See this pic for an example of the description above.
In this example shows that on some Port AND Protocols need to be listed.
iChat uses TCP and UDP so some devices will need the ports listed one by one and some settings done twice, once for each protocol. The example above has a "Both" setting
See Apple Article HT1507 Previously Doc 93208 for more information. This is the Tiger iChat 3 list. The same ports are needed for Leopard except for these changes
My Note 2:
On the first link Note 1 under tables in that link would be better if it read:
" 1. All iChat AV traffic is UDP -
except for ports 5190 and 5298, which need to be open for both TCP as well;
and 5220, 5222, which need to be open for TCP only. "
Note 2
GoggleTalk needs port 5223 on TCP. Also note the Server name for iChat 3 set ups
UPnP Universal Plug n Play.
This is a simple Plug and Play type of setting. iChat can find it's own way through a router if the device has this capability.
By Not doing Port Forwarding, Triggering or DMZ and enabling UPnP the application is allowed to control the modem and the ports that are open.
They close after the application has finished with them on a timed basis.
On some devices the number of "hops" (how far away the UPnP can be "seen") can be reduced from a default of 4)
Trigger Ports
Some devices offer a security measure that works by a first or trigger port receiving a data packet and then opening further ports when accepted.
The first port for incoming Video or Audio invites is port 5678.
Pre iChat 4
When you click on the invite window the process moves in to port 5060 (so these will need to be opened by the trigger port) for negotiating the final group of ports from the group of 20 (16384-16403 These will need to open when the trigger says so as well). Therefore port 5678 triggers ports 5678, 5060, 16384-16403. All on UDP. Port 5190 neeeds to trigger port 5190 for both TCP and UDP.
See this variation where only the ports listed above are completed.
The other single ports need to be set one by one in addition. (5220,5222, 5223 5297, 5298, 5353)Replace
iChat 4
The port used in IChat 4 is port 16402 instead of port 5060. The group of 20 ports is reduced to 10 (16393-16402). This is because all the In and Out Audio and Video data is on one port. Other that than the settings are the same.
At this time there is no Info on the ports the Screen Sharing in iChat 4 uses.
Wireless
Here you will have to read around but this Apple Article TA25949 Previously Doc 58514 might be a good starting place.
Essentially whether you are wireless or Ethernet to your routing device makes very little difference to the way you do things.
Your computer will get two IPs from a DHCP server if you are connected by both methods. (iChat does not like this)
Multiple devices
Make sure only one is acting as a DHCP server. Make sure wireless devices are bridged properly.
Further Help
I have found that this site (ADSLGuide) to be helpful.
It is British based but I have linked you to the Apple Related Discussions Forum.
Eliminating Problems on my Personal web pages.
The ports and their function within iChat. (my personal Web pages again)
This is not a step by step approach. You will have to read around the information about your device.
Collected FAQs and Expansions: Index Page Based on FAQs here by EZ Jim and myself
Also http://www.portforward.com/routers.htm for instructions with Pics on Port Forwarding and access info as mentioned earlier.
Click on your device.
Select iChat on the next page.
Follow the info on the next.
This site is godd for finding out the Default IP to use in a web browser and the default User ID and Passwords needed to do so.
Gives you a chance to look at at pics to give clues to where some of these other things are.
With thanks to Macmuse for comment on the Original (Aug 23rd 2004)
and to EZ Jim for his work on iSights on my web pages.
I may receive some form of compensation, financial or otherwise, from my recommendation or link.
9:51 PM Saturday; December 6, 2008 -
Since update of my Mac Book Pro my previously drafted Notes no longer appear on my Mac but are still available through iCloud on my iPhone and iPad. How do I get my Mac to sync with the other devices as e'thing else has synced on my MAC through iCloud. Also since the update Notes no longer appear as a folder in "Mail" but are now a distinct programme-is there any way of returning Notes to the Mail programme?
Thanks, but I've been on the phone with AppleCare US (where I am and live) and AppleCare UK. They continue bouncing me back and forth without helping resolve the problem.
Perhaps someones knows how to further escalate the issue at Apple? -
140063685933 this is the receipt no
Apart of two purchase there all rest I never received was a problem with the system they couldn't be download and naw you are charging me
Haw unprofessional is that and more than an hour can't find how to get to customer service to correct the mistake
Just so fed up will never ever pitches anything waiting of time and moneyApple is not here. Apple does not answer questions here. There are only volunteer users here.
The charge to your credit card takes place before you download the app.
If you are having problems downloading the apps that you bought, you will need to explain the issue in detail if you wish someone to help you. -
After refusing an update now all I get is a white screen with the firefox logo. If I have to reinstall firefox 3.66, how can I transfer my firefox profile with bookmarks etc, to the new installation?
== This happened ==
Every time Firefox opened-> press '''F11''' to bring the computer out of FullScreen
-> Tap '''ALT''' key or press '''F10''' to show the Menu Bar
-> go to View Menu -> '''Zoom''' -> click '''Reset''' -> '''Page Style''' -> select '''Basic Page Style'''
-> go to View Menu -> Toolbars -> select '''Menu Bar''' and '''Navigation ToolBar''' -> unselect All Unwanted/Incompatible Toolbars
-> go to Tools Menu -> Options -> General -> '''When Firefox starts : select "Show My Home Page"''' -> Type the address of the website which you want to be your HomePage e.g. http://www.google.com
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> '''Firefox will: select "Remember History"'''
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious/Incompatible Extensions (Add-ons)
-> go to Tools Menu -> Add-ons -> Appearance section -> REMOVE All Unwanted/Suspicious/Incompatible Themes (Persona)
Now Restart Firefox. Check and tell if its working. -
How can I get "IMAQ Line Fit" stable (with the same points)
How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi 169 KB
IMAQ-Fit-Line-Problem-86.doc 230 KBThank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi 18 KB
Fit_Line_Bisquare_Linear.vi 40 KB -
I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?
As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
http://web.me.com/pondini/Time_Machine/Home.html
http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums). -
How do you transfer voice memos to your pc? I have synced my phone a number of times and everything updates with the exception of voice memos? Also, my voice memos are checked to be synced everytime my phone is synced.
Voice memos, once correctly synced, will appear under your Music Library. Can you go through your music library to check?
-
How to get real value from selectOneChoice with javascript?
Hi,
How to get real value from selectOneChoice with javascript? The event.getNewValue() only gets me the index of the selected item, not the value/title.
JSF page:
<af:resource type="javascript">
function parseAddress(event)
alert("new value: " + event.getNewValue());
</af:resource>
<af:selectOneChoice label="Location:" value="" id="soc4">
<af:clientListener type="valueChange" method="parseAddress" />
<f:selectItems value="#{Person.locations}" id="si7"/>
</af:selectOneChoice>
HTML :
<option title="225 Broadway, New York, NY-10007" selected="" value="0">225 Broadway (Central Office)</option>
<option title="90 Mark St., New York, NY-10007" value="1">90 Mark St. (Central Office)</option>
Thanks a lot.Something I was missing ,
You need to add valuePassThru="true" in your <af:selectOneChoice component. I have personally tested it and got the actual value in alert box. I hope this time you got the real solution. You can also test the following code by your end.
<?xml version='1.0' encoding='UTF-8'?>
<jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.1"
xmlns:f="http://java.sun.com/jsf/core"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<jsp:directive.page contentType="text/html;charset=UTF-8"/>
<f:view>
<af:document id="d1">
<af:form id="f1">
<af:panelBox text="PanelBox1" id="pb1">
<af:selectOneChoice label="Set Log Level" id="soc1"
value="#{SelectManagedBean.loggerDefault}"
valuePassThru="true">
<af:selectItem label="select one" value="First" id="s6"/>
<af:selectItem label="select two" value="Second" id="s56"/>
<af:clientListener method="setLogLevel" type="valueChange"/>
</af:selectOneChoice>
<af:resource type="javascript">
function setLogLevel(evt) {
var selectOneChoice = evt.getSource();
var logLevel = selectOneChoice.getSubmittedValue();
// var logLevelObject = AdfLogger.NONE;
alert("new value is : " + logLevel);
//alert(evt.getSelection);
//alert(logLevelObject);
evt.cancel();
</af:resource>
</af:panelBox>
</af:form>
</af:document>
</f:view>
</jsp:root>
Maybe you are looking for
-
Does anyone have an email address for someone who cares at Verizon Wireless?
I have had enough with Verizon Wireless and their lack of service and NO WAY to contact tech support. Which of you brave people will speak up and answer this question? Any way to get answers on ANYTHING to do with lack of phone service, no connection
-
It seems that emails I send via Mail on my mac are stored only in Mail's Sent folder. These emails don't appear in the sent folder of Yahoo web browser, iPad Mail app, or the Y! Mail android app.. I've tested to see whether my emails are actually sen
-
Using Customized group name fields in Live Office
Hello everybody, I've created a Crystal Reports based on a BEx Query and including a costcenter hierarchy. Now I want to add this report in Excel sheet via Live Office. I did this according to the official HowTos provided by Ingo Hilgefort. Now I've
-
What do I do when my ipod shows me the white apple logo but doesn't start?
what do I do when my ipod shows me the white apple logo but dosent start? by the way it ran out of battery but when I plug it in this happens.
-
I then press OK and Firefox starts normally, how do I fix this ?