How to get my .pdf filesize down (I have tried many things!)
Hi everyone. After about an hour and a half of thoroughly searching the web, seeing others suggestions that don't work for me, or trying online resizers, I am now officially pissed off, especially since I consider myself a somewhat computer savvy person.
Ok...So I am trying to upload a transcript of mine onto an application website for a job. The transcript file size is 242 KB. For some reason, the max upload file size on the website is 200 KB, which is ridiculous I think but it's what I have to work with. There are 4 pages in the .pdf file. I can do without one or two of the pages, but I have tried everything. There is no option under Document...extract pages or whatever it was. I tried "printing" it using a document writer and saving only a couple of the pages but then the quality comes out horrible.I have tried "print screen" then saving it in paint and all that but that doesn't work well either. Now I turn here for help cause I feel I am about to break something!
How can I get this file size down?!? Any help would be greatly appreciated.
I am using windows 7 64 bit and Adobe X reader.
Thanks,
David
Hi,
You may try to download: www.pdfsam.org
Spite and merge pdf files. It's free and open source. Good luck.
Rgds,
Know-Little-Bit
Similar Messages
-
I recent recieved and Ipod touch model A1213 and i cannot figure out how to get apps on it. I have tried everything i can think of and when i try to update my ipod software it tells me that its already up to date. even though its only 1.1.5. How do i fix it?
You have a 1st generation iPod Touch.
It can be updated to 3.1.3 by purchase. See here Purchasing iOS 3.1 Software Update for iPod touch (1st generation) -
How to I get menubar to display submenus? I have tried many things
I have cut and pasted old menubars that worked. I have downloaded Sry again and uploaded hundred menubar changes, but not much happens and I never get the submenus.
I am redesigning a webpage at www.vienergy.org (The Virgin island Energy Office)
My sample of the new design that I can't get to work can be reached by clicking on the BuIlding page at that site.
my email is [email protected]
I have spent many hours on this and would appreciate any help. I am sure it is something dumb that a nonprofessional like me does not see.Don, I found a few errors, but was not able to reconstruct the menu to the point of getting it to work. There is some other CSS overriding your SpryMenuBarHorizontal2.css file.
But, that said, I did try out some changes:
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
margin: 0;
padding: 0;
list-style-type: square;
font-size: 100%;
cursor: default;
width: auto;
/* float: none; I don't think you want to unfloat your menubar (this style cascades to all elements of the menu)
height: auto;
list-style-position: inside;*/
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
position: relative;
text-align: left;
cursor: pointer;
width: 122px;
float: left;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
margin: 0;
padding: 0;
list-style-type: none;
font-size: 100%;
z-index: 1020;
cursor: default;
width: 8.2em; /* this had been changed to 8.2px, which is mighty narrow for a ul */
position: absolute;
left: -1000em;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
left: auto;
/* Menu item containers are same fixed width as parent */
ul.MenuBarHorizontal ul li
width: 8.2em;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
position: absolute;
margin: -5px 0 0 95px;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
left: auto;
top: 0;
DESIGN INFORMATION: describes color scheme, borders, fonts
/* Submenu containers have borders on all sides */
ul.MenuBarHorizontal ul
border: 1px solid #CCC;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal a
display: block;
cursor: pointer;
background-color: #39617B;
color: #000000;
font: bold;
border: thin solid #0000FF;
padding-top: 0.4em;
padding-right: 0.75em;
padding-bottom: 0.4em;
padding-left: 0.75em;
/* Menu items that have mouse over or focus have a blue background and white text */
ul.MenuBarHorizontal a:hover, ul.MenuBarHorizontal a:focus
background-color: #666666;
color: #FFF;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
background-color: #33C;
color: #FFF;
SUBMENU INDICATION: styles if there is a submenu under a given menu item
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
background-image: url(SpryMenuBarDown.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenu
background-image: url(SpryMenuBarRight.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarDownHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal ul a.MenuBarItemSubmenuHover
background-image: url(SpryMenuBarRightHover.gif);
background-repeat: no-repeat;
background-position: 95% 50%;
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
position: absolute;
z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
ul.MenuBarHorizontal li.MenuBarItemIE
display: inline;
f\loat: left;
background: #FFF;
A more major difficulty was that in the head of the page, there were no fewer than 4 links to various SpryMenuBarHorizontal.css files (with various names) and the Javascript in the foot of the page, added by the insert spry menubar, did not call out the most recent menubar variable. So I guess it's possible that the wrong javascript file was being called, too!
I recommend that you start a new page from scratch (maybe in a new site), link carefully, and insert the Spry Menu Bar and its various auxiliary files, save, see if it works with no changes to it, and slowly and carefully change the css file.
It will be much easier than trying to 'unbend the rusty nails' in order to use them again.
Beth -
How to get the PDF data which i have send to Spool
Dear Freinds,
My requirement is to display the output which iam getting from a custom report(ZSALARY) in the form of PDF . So now i wanted to display the ALV output on to my desktop (as of now) in PDF format.
i have done the below coding please correct me why iam not getting the same data which is coming out of my report in the PDF, iam passing the same internal table.
IF NOT it_final[] IS INITIAL. -
>IT_FINAL is my main internal table in the report ZSALARY
DATA : count TYPE syprcop,
days TYPE sypexpi,
params TYPE pri_params,
valid TYPE c,
pdf_table TYPE rcl_bag_tline,
spoolid TYPE rspoid,
pdf_fsize TYPE i.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01'
copies = count
list_name = 'ZSALARY' -
tHIS IS MY REPORT NAME
list_text = 'ZSSPOOL'
immediately = ' '
release = 'X'
new_list_id = 'X'
expiration = days
line_size = 90
line_count = 65
layout = 'X_PAPER'
sap_cover_page = 'X'
receiver = 'SAP*'
department = 'System'
no_dialog = 'X'
IMPORTING
out_parameters = params
valid = valid.
NEW-PAGE PRINT ON PARAMETERS params NO DIALOG.
WRITE : 'hi this is the test for spool'.
NEW-PAGE PRINT OFF.
COMMIT WORK.
WRITE : / 'The Spool no is ', sy-spono. "system variable for spool no
spoolid = sy-spono . -
At this point i can see the spool no.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spoolid
no_dialog = 'X'
IMPORTING
pdf_bytecount = pdf_fsize
TABLES
pdf = pdf_table
EXCEPTIONS
OTHERS = 0.
CHECK sy-subrc = 0.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = pdf_fsize
filename = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
filetype = 'BIN'
TABLES
data_tab = it_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
ENDIF.
if i go and on my desktop it is saying the below error "ADOBE READER COUDNT OPEN 'test.pdf'
because it is either not supported file type or because the file has been damaged.
my aim is to get the data which is there in IT_final in the PDF .....please correct me the parameters which i have given wrong. my doubt is in GUI_download fM in the tables should i pass it_final or
the pdf_table coming from'CONVERT_ABAPSPOOLJOB_2_PDF'...... i tried this option iam able to open and it is just giving message which i kept before this FM i.e WRITE : 'hi this is the test for spool'.
what i should to get my internal table data.
Pls help.
regards
srinivas.Dear Karthik,
Thank you for giving me the link there by iam able to get the ouput download int he pdf
as below code , but now a small problem for me .......i have 10 fileds in the Report ouput ....but however in the pdf output i can see only 8 fields and the two fields got truncated . Could you please tell me what
i have to change in my below code so that i can get all the values
IF NOT it_final[] IS INITIAL.
data : it_tsp01 type standard table of tsp01,
l_wa_tsp01 type tsp01.
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
destination = 'LP01'
copies = count
list_name = 'ZHR_BON'
list_text = 'ZSSPOOL'
immediately = ' '
release = 'X'
new_list_id = 'X'
expiration = days
line_size = 90
line_count = 65
layout = 'X_PAPER'
sap_cover_page = 'X'
receiver = 'SAP*'
department = 'System'
no_dialog = 'X'
IMPORTING
out_parameters = params
valid = valid.
SUBMIT (sy-repid) TO SAP-SPOOL
SPOOL PARAMETERS mstr_print_parms
WITHOUT SPOOL DYNPRO
WITH pnppernr = p0001-pernr
AND RETURN.
CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
EXPORTING
src_spoolid = spoolid
no_dialog = 'X'
DST_DEVICE = params-PDEST
IMPORTING
pdf_bytecount = pdf_fsize
TABLES
pdf = pdf_table
EXCEPTIONS
OTHERS = 0.
CHECK sy-subrc = 0.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = pdf_fsize
filename = 'C:\Documents and Settings\Administrator\Desktop\test.pdf'
filetype = 'BIN'
TABLES
data_tab = pdf_table "it_final
EXCEPTIONS
file_write_error = 1
no_batch = 2
gui_refuse_filetransfer = 3
invalid_type = 4
OTHERS = 5.
ENDIF.
Please tell me how i can get the all the fields which are there in my normal alv output ......
Case 1) .i wanted all the 10 fields in PDF to be displayed without truncated , I have checked in Spool ........ i found all the fields are there .....but however when i check the downloaed PDF i can see some fields are getting truncated.
Case 2) However if on the ALV output if the user hides 2 fields out of 10 fields then only 8 feilds which are appearing on the output before sending the Spool should only be displayed in PDF as well -
> for this scenario what i have to do.
Thanks Once again.
regars
srini. -
How can I get my iTunes to function properly. It stopped working a couple of days ago and I can't figure how to get back and running. I have tried numerous things such as rebooting, checking for the network connection, applying it to open without security measures. Error message "Your connection time out. Check your connection." Even though I can get into the internet, iTunes is still not responding! Technical support help isn't helping!
Just to close out ... the 'supervisor' was clueless as it turns out. Apple does NOT have a deal with UPS on handling the Mini, so the person who gave me the info was wrong. Did he call back? No ... he just let me go out and find out myself.
So I called again, and this time eventually ended up with a manager, who told me that the UPS Store thing wouldn't work, but that a box would arrive and then there would be a 'forced replacement'.
About 10 minutes later he called back and said he discovered that EVERYTHING the supervisor did was wrong ... he didn't actually properly flag for auto-replace, so I would have gone through an identical cycle again! So he had to restart the whole process, meaning I would get TWO 'coffins', but that I would then get an auto-replacement and would see that indicated in my support email.
I got the email, saw 'auto-replace'. Got the box on the 28th and immediately turned it around. Apple got the box on the 31st, and on the 1st I got emails that my Mini would arrive on the 2nd and it also had the new serial #.
Yesterday I grab the box from FedEx and go home to check it out. As expected, it IMMEDIATELY worked on my WiFi without issue ... and has worked perfectly since.
So ...
- it was NOT my home network.
- it WAS a hardware issue with the Mini
- Apple does NOT do proper testing on the Mini to detect what appears to be a fairly common issue.
- non-retail customers ARE treated as second-class by support.
This issue took FOUR WEEKS to resolve, involved FOUR shipments back & forth, and the ONLY reason it got resolved was that *I* did the troubleshooting that Apple either would not or could not do.
For someone who has been an Apple customer for more than 30 years, this has been a sobering experience ... I quite frankly expected much better from them. -
Submit a PDF as a PDF to a servlet, and how to get my PDF from servlet
Hi all as the title above,
i have a button typeformat as PDF and sent to a URL( which is my servlet )
after this step how to get the PDF from my servlet.
the PDF has sent to my servlet and stop, so is there any way to get the PDF i sent ?
can someone help me?
thanksYou can use the following code:
byte[] content = getRequestBufferAsBytes(request);
...then do whatever you want
public static byte[] getRequestBufferAsBytes(HttpServletRequest request) throws IOException, ServletException
// get the RequestBuffer
ServletInputStream oInput = request.getInputStream();
long nContentLength = request.getContentLength();
String contentType = request.getContentType();
if (nContentLength <= 0)
return null;
byte[] cContent = new byte[(int)nContentLength];
// read the content in 512 bytes chunks
// a single read does not get all the characters
int nRead = 0;
int nToRead = (int)nContentLength;
int nBlkSize = 512;
byte[] cTemp = new byte[512];
do {
int n = 0;
int i = 0;
if (nToRead - nRead < 512)
nBlkSize = nToRead - nRead;
n = oInput.read( cTemp,0,nBlkSize);
for (i = 0; i < n; i++)
cContent[i+nRead] = cTemp[i];
nRead += i;
} while (nRead < nToRead);
//cContent[nRead] = (byte)'\0';
Long nBytesRead = new Long( nRead );
return cContent;
Jasmin -
How to get the Pdf's page size?
Hi,
Anyone can tell me how to get the pdf's page size with js in acrobat?
Regards
GoldbridgeThe page size will not always necessarily conform to a standard size such as A4 - PDFs can be defined at any abstract size a user wants. Having a function that only output standard sizes would greatly limit its ability, so it was left up to the user to calculate whether or not the returned rectangle is a standard size as that satisfies many more workflows than the opposite method.
-
I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x? -
I reinstalled my plug-ins into Photoshop CC (2014) on Mac OSX 10.9.4, and they are greyed out in the Filters menu. How do I get them to work? I have tried everything including repairing permissions.
My apologies. Your post jogged my little grey cells to the point that I did a few experiments. In essence, you are right. My plug-ins do not work with 8-bit greyscale images. I like to deliberately shoot B&W and have a Wratten #12 minus-blue filter on the lens--as I used to do with film cameras.
The raw files ( Fujifilm's .RAF) were converted in Adobe CR by checking off "Convert to Grayscale" under the fourth tab. In the future, I will do the B&W conversion in Photoshop with either Nik or Topaz plug-ins.
Thanks for your input! -
How can I get updates for Photoshop CS5 to download to my new Mac book pro where CS5 is already installed from my original disk? I have tried many times over 2 days. I get the same error messages re downloading error. I successfully downloaded the current version of Adobe DNG Converter & it installed perfectly. Help please!
The Adobe auto updater is highly unreliable.
You need to look for and download the update yourself and then manually apply it as per the detailed instructions on the download page:
Adobe - Photoshop : For Macintosh
~~~~~~~~~~~~~~~~~~~~~~
Please note that the Adobe Camera Raw plug-in must be updated separately, after you have updated Photoshop:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh -
Okay i had to install Itunes onto my new OS because window's Vista messed up on me and i can't get any of my old purchases back from my account such as music and movies any ideas on how to get them back (i do not have the folder that contains old items from the last itunes or anything from that OS because it had a virus and i just wanted windows 7)
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Hope this helps,
JD -
I upgraded my Firefox and my home page (which I love) is GONE. Not sure how to get it back. I still have my bookmarks though. Thanks in advance for helping me.
If that didn't help then see this article for more suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]] -
I disabled my iPhone 4 and while doing a restore via iTunes, it is downloading and timing out so the download is not completing. any idea how to get past that? I have tried many times and the same error keeps happening.
You need to force the phone into recovery mode, as described here, & restore it:
http://support.apple.com/kb/ht1808
Sorry, you've already lost all data on your phone. -
When I try to update an app in the App Store i get a message "There was an error in the App Store. Please try again later. (13)" I have tried many many times and keep getting the same message. How do I resolve?
First take the steps recommended in this support article. If there's no change, continue as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Cookies/com.apple.appstore.cookies
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
In Pages when I click the 'Sections' button then click on the 1st page I get a page that is titled "Lorem ipsum dolor sit amet"! Where did it come from and how do I get rid of it? I have tried deleting and "dont save" but it comes back. It is a full page in some unknown language. The only thing I can decifer is 'cupy uf cak'. Rdal
Roger,
The icon is +Sections, not just Sections, as in "Add a Section". When you click that icon you get a section break and and a new section template, complete with preformatted text called placeholder text. The reason "Lorem ipsum" is there is so you can see what the format looks like. The reason that it is Latin gibberish is so you won't get hung up on, or distracted by, what it says. It's just a display of format. Select the "Lorem ipsum" text and start typing your content.
Jerry
Maybe you are looking for
-
If then Else using DAX Calculation
Hi all, new to DAX. I am trying to replicate a Oracle SQL column using DAX functions in SSAS Tabular. My Oracle column is defined like below: If STATE_CODE Not in('A','B','C','D') And Not (substr(PK_ID,4,2) = 'XY' And DIV_CODE in('YU','SD'))
-
Iphone 5 - can't delete albums in the albums no minus sign when in edit
I need to free up storage on my Iphone 5...when I am in ALBUMS ...I chose EDIT and NO MINUS sign appears to the left. I have old photo albums from a blackberry torch and photos from various camers got loaded up I am guessing through Itunes on a PC t
-
1.1.3 Firmware Not Working Correctly
For some reason, my 1.1.3 firmware does not work. If i go in to setting and about, it says i have 1.1.3 installed, but, i do not have the wiggle function nor do i have ANY of the 1.1.3 updates. Any advice on how to fix this would be apprecited.......
-
How to get variable from subpanel
Hi, May I know how to get the variable from the subpanel VI? Please see my VI, when I start the test in any of the subpanel, I can't get any variable in the "Get All Control Values Variant" indicator. Is there any wrong? Thanks. Solved! Go to Solutio
-
Actionscript help on semi-advance flash
So I'm trying to create a flat carousel similar to the one located here http://www.square-enix.com/na/index_f2.html (as a side note before reading the 2nd half, my trouble is with the thumbnail loop buttons) I have created all the graphic elements, n