How to get Networking Switch Port Configuration (I guess SNMP4j will help)

Greetings :)
We have extreme Summit 450e switches installed in our organization. approximately 2000 desktops are connected to these switches.
Now, I want to make a utility to get info from these switches, for example, which IP, MAC etc is running on a particular switch port. I want to extract these kind of info from all switches and export it into a database.
Any help, how to start this work.
Thanks...

> Any help, how to start this work.
First research what programmable interfaces it supports.  That includes any management API including SNMP, TCP and HTTP.
And then from that figure out what you want to do with it.
After you do both of the above then you start looking to java to program the solution.

Similar Messages

  • Switch port configuration for 3500i AP

    Hi,
    We are due to install a brand new enterprise WLAN based on the WiSM2 platform, 3502i AP and WCS. The APs will be plugged into the 2960S-24TPS-L.
    I have scanned over all documentation and cannot for the life of me find a recommended switch port configuration for connecting the AP to the switch in terms of speed / duplex etc. For example, should I just configure the port to auto detect, or is forcing the speed / duplex the way to go. I could also do with knowing other best practice configurations for AP connectivity.
    Any help would be greatly appreciated.
    Chris.

    The AP comes online with just auto detect, but I want to know if there are any benefits to forcing this to 1Gbps / Full duplex, or even if this is the right way to go. I suspect auto detect is the best method.

  • How to get  Network Interface Cards information ?

    hi all,
    how to get Network Interface Cards information and tcp window size by java ?

    807262 wrote:
    how to get Network Interface Cards information Have a look at [url http://download.oracle.com/javase/6/docs/api/java/net/NetworkInterface.html#getNetworkInterfaces%28%29]NetworkInterface.getNetworkInterfaces()
    tcp window sizeWhich one?
    SO_RCVBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getReceiveBufferSize%28%29]Socket.getReceiveBufferSize()^
    SO_SNDBUF ^[url http://download.oracle.com/javase/6/docs/api/java/net/Socket.html#getSendBufferSize%28%29]Socket.getSendBufferSize()^

  • I gifted a ringtone to my sister that I purchased from the iTunes store, and it is on her phone, but we can't figure out how to get it moved to her ringtones.  Can anyone help?

    I gifted a ringtone to my sister that I purchased from the iTunes store, and it is on her phone, but we can't figure out how to get it moved to her ringtones.  Can anyone help?

    Edit > Preferences.  Select the check box for Ringtones, this will add them to the listing in iTunes. 
    Not sure that really answers your question though.

  • I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

    I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

    The pdf is loading as html code. If you save it, it will download as :
    605124.pdf.html
    Change the extension to .pdf
    And it opens and works perfectly, I just tested it:
    Use this link to download it automatically:
    http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

  • My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?

    My dad and I have shared an iTunes account for years and I just created a new apple id but I have no Idea how to get all those purchases to this new account. Help please?

    The old Apple ID (presumably your dads) owns those songs and your new Apple ID does not.  However, your dad can authorize your iD to use the songs by going to Store > Authorize This Computer from your iTunes menu and entering his Apple ID and password.

  • I DON'T KNOW HOW TO GET ANY RADIO STATIONS ON MY I-POD, PLEASE HELP!!!!!!!!

    I DON'T KNOW HOW TO GET ANY RADIO STATIONS ON MY I-POD, PLEASE HELP!!!!!
    ON THE I-TUNES PROGRAM WHERE THERE IS A LISTING OF INTERNET RADIO STATIONS, I HAVE TRIED TO ADD STATIONS TO MY I-POD CLASSIC, BUT NOTHING HAS SHOWN UP ON MY I-POD & I DON'T KNOW WHAT ELSE TO DO...
    DOES ANYONE KNOW HOW TO ADD INTERNET RADIO STATIONS FROM I-TUNES ONTO THE I-POD CLASSIC????
    PLEASE I REALLY NEED SOME HELP WITH THIS & I DON'T WHERE ELSE TO TURN TO BECAUSE I HAVE LOOKED IN THE SUPPORT & HELP SECTIONS & THERE IS ABSOLUTELY NOTHING MENTIONED ON THIS TOPID THAT IS ANYWHERE USEFUL TO ME, PLEASE HELP!!!!!!!!! THANK YOU SOOOO MUCH!!!

    Please don't type in all caps... I get a headache trying to read it.
    The Internet radio in iTunes works because you have an Internet connection.
    Your iPod classic does not have an Internet connection. It's just a media player. Therefore, there is no way to put Internet radio on an iPod classic.
    If you want to play regular (over the air) FM radio on your iPod classic, you can use the iPod radio remote control.
    http://store.apple.com/us/product/MA070G/D

  • HT1349 Mobile phone somebody have stolen or lost . How can I turn it off. I hope you will help me.

    Mobile phone somebody have stolen. How can I turn it off. I hope you will help me.

    Hi حسن الحسن,
    If you have recently had your iPhone stolen, you may find the information in the following article helpful:
    Apple Support: What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668
    Regards,
    - Brenden

  • LMS 4.2 - How do I find switch ports that are configured as trunks.

    I've been tasked with finding all switch ports that are configured as Trunks. We plan to use LMS 4.2 to push (via Netconfig) new interface level commands to all user (non-trunked) ports. From my experience, this poses a problem because we do not know which ports are configured as trunks -vs- user ports.
    Using Netconfig is not going to be easy since there is no way to script this. It would be great if I could run a show command on a switch and then have CWSI peform a change based upon the output.
    In other words, we need a way to run a job based upon the output of a command.
    Is there a section of LMS that I could use for help with this?
    Thanks,

    You need to go to Monitoring>Dashboard. Here Just click the switch in the Llisted device and then click the interface you will find the all the down and Up interface with type of configuration (i.e. Trunk or Access.)

  • ESX/VMWare Switch Port Configuration

    Does anyone know how to configure a 3560 switch port that is connecting to an ESX host with multiple VM's??

    Hi Jason,
    Most of the time people will configure the port as a trunk to the ESX host.  So on the 3560 you can just do:
    switchport trunk encap dot1q
    switchport mode trunk
    This will allow your VMs to be in different vlans if you would like.
    Chad Peterson
    CCIE 23213
    Network Consulting Engineer
    .:|:.:|:.
      CISCO
    PDI Data Center
    http://www.cisco.com/go/pdihelpdesk

  • AP-1131AG: 2 VLANs/SSIDs, switch port configuration?

    We're setting up a (seemingly) simple deployment of some APs, and want 2 SSIDs...one will have Pre-Shared WEP and one will be open and broadcast (with access-lists on the router). My question is how to set up the switch port to match my AP, in order for it to pass both VLANs (in this case I've setup WLAN100=VLAN100 and WLAN101=VLAN101)...Do I have to configure trunking on that switchport? Thanks for any links or answers on this!!!

    Hi Vince,
    Here is a great doc that goes over this concept in detail. You will need to configure Trunking on the switchport. Have a look at what yours might look like;
    switchport mode trunk
    switchport trunk encapsulation dot1q
    switchport trunk native vlan 1
    switchport trunk allowed vlan 1,100,101
    From this excellent doc;
    Using VLANs with Cisco Aironet Wireless Equipment
    http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801d0815.shtml#clic2935xl
    Hope this helps!
    Rob

  • How to get 2 lans ports working on K8N Neo2 platinum

    I can only get the one lan port working which is the realtek device. Ive tried installing drivers for the marvel lan but it doesnt show up in device manager. Can any one tell me how i get this second lan port working.
     

    Quote from: Justmeto on 02-July-06, 05:02:54
    I can only get the one lan port working which is the realtek device. Ive tried installing drivers for the marvel lan but it doesnt show up in device manager. Can any one tell me how i get this second lan port working.
    The other network interface is by nVidia -- the Marvel part is just the PHY for the nForce3 NI -- and the drivers should install with the nVidia driver install.  Which nVidia driver package are you using?  People have had NI trouble with the 5.11 pack - personally I use the 5.10 pack with the 4.79 IDE/SATA drivers which you should be able to find here: [urlhttp://downloads.guru3d.com/download.php?id=19[/url].  In BIOS Setup under Integrated Peripherals, what's labeled MAC Lan(nVIDIA) is the one you want to make sure is on Auto.

  • 2 airport expresses and clear hub--how to get network back?

    I just got clear internet because centurylink more than doubled my rate.
    I had the centurylink modem/router set in bridge mode... I need to know how to do this and how I can get my wifi network and printer through my two airport expresses again, but clear won't help me--I've just had 3 frustrating chat sessions (in one of which, they did not know their own equipment and didn't know there are two ethernet connections on the modem).  They told me they won't help, and I have to go to apple but my expresses/computer are no longer under warantee (though my phone is).
    Any ideas about what to do? I can't afford an expensive tech support call.

    Do i need to set up my Expresses to 'Join' a wireless network, or 'extend' or both or neither.
    Neither. Both of those features are used when you are wirelessly extending a network. Since the AirPort Express (AX) will be connecting via Ethernet, you do not use those.
    All you need to do is configure the AX to create a wireless network and act as a bridge (not sharing a single IP address). If you use the same SSID (network name) and wireless encryption type/level/password as the Time Capsule, your devices will seamlessly roam between the two base stations. It will appear as one wireless network.

  • How to get network IP camera of images or media ?

    Please tell me how to use jmf to get network IP camera of images or media?
    if you can provide source code, send me please
    my e-mail: [email protected]
    thanks!!⊙ω⊙

    Hi
    m also doing almost same work..wht u r tryied to do. I got the JMF-code, which capture video from webcam & split it in to Frame. But don't know how to capture video from ip-camera.....Can u help me...???

  • How to get the WD port number of the actual system?

    Hello everybody,
    In my application I'm calling a Sap Gui transaction through an ITS WebGUI link that is generated dynamically by an action method. Works find so far.
    However, as the code has to run on various systems (development, test, production) I also have to generate the system and port name dynamically. System name is no problem, but how can I get the WD port of the actual system? Is there any method or variable for that? Couldn' find anything so far...
    Thanks in advance for any help!

    Hello,
    As Thomas mentioned, you have to use the utility class to construct the URL for any application.
    you have two options here
    Option 1 -> Prefix your generated WebGUI link with '/' and pass it to the method CL_URL->HOST in the URL parameter. this method will prefix the corresponding http:<host>:port to the passed in URL.
    Option 2 -> you can directly use the method CL_URL->ITS to generate your entire web GUI link.
    BR, Saravanan

Maybe you are looking for

  • Needed select all button in alv report

    Dear Experts,                 In alv report i want first field as button selectall then remaining fields must be displayed this is my code,, DEFINE m_fieldcat.   is_fieldcat-fieldname = &1.   is_fieldcat-hotspot   = &2.   is_fieldcat-seltext_m = &3.

  • Why are there 2-sets of IMAGE UNITS in Motion 5?

    I seem to have 2-sets of Image Units in my Motion 5 library: The first set has an icon exactly like the Filters icon; the second set has an icon exactly like the Generators icon.  I have read elsewhere online that it appears not everyone has the firs

  • Mini-dvi to svga

    Hey, my name is Chuck and I have a macbook and a moniter. The moniter is only svga and I couldn't find any cable that connects mini-dvi (macbook) to svga. Is there any possible way to connect them?

  • Why is the validity of my digitally signed document displayed as unknown?

    Why is the validity of my digitally signed document displayed as unknown? Adobe X version 10 1.4 What exactly do I have to do under Preferences-Windows Integration?

  • How to remove black "blocked plug-in" window that opens with iPhoto and covers everything under it?

    How to remove black "blocked plug-in" window that opens with iPhoto. It covers iPhoto and everything under it. I've right and left clicked the black window, restarting the computer, shutting down the computer, but the window always appears when I ope