How to get  past four month user history?

Hi ,
can any one help me.How to get past three month details like login and logoff from oracle database
Edited by: 849135 on Mar 31, 2011 11:29 PM

Hi;
Check our previous discussion thread, if audit mechanisim is not avaliable on your db its ahrd to get all information. But you can get some info from thread which i mention here:
Whether a DB user account has logged in the Oracle database
Re: Whether a DB user account has logged in the Oracle database
Regard
Helios

Similar Messages

  • How to get past gray screen on MacBook?

    How to get past gray screen on MacBook?

    Here are some initial things to try.
    http://support.apple.com/kb/ts2570
    http://lifehacker.com/how-to-troubleshoot-the-four-most-common-oh-sh-t-mac-48708 0511

  • How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

    Hi,
    How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
    Regards
    Anil Kumar

    Hello there Anil,
    A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
    maybe 60 days to so, watch the DB size).
    To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
    In your search scope you can use the following XPath to play with.
    - All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
    - All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
    You can play with the "RequestStatus".
    Hope this helps.
    Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
    faster.]

  • How to get the list of users who has access for list of tcodes.

    How to get the list of users who has access for list of tcodes.

    Go to transaction SUIM, this has a number of reports for users/authorisations
    open the Where used>Autorization Values>In Users
    and double click to execute
    in authorisation object, enter S_TCODE
    then press the "Enter Values" button
    It will offer entry boxes to put the transaction code you are interesed in.
    Then execute and the list of users with access to this transaciton code will be returned.

  • How to get the current month number

    Hi everyone,
    Does anybody know how to get the current month number in Oracle Discoverer Worksheet calculation?
    I try to use EUL_DATE_TRUNC(CURRENT_DATE, 'MM'), but instead I got 01-AUG-00.
    If I change the data display format to MM, it will give me "08" but if I use TO_NUMBER function to convert it to number I get error "invalid number"
    Is there anyway to get the current month value in number? Thanks

    Scott,
    Thank you so much! It works perfectly! :)
    Hope you have a great day ahead!
    Cheers,
    Angeline

  • How to Get the current month at timezone UTC-10

    Hi All,
       can you please let me know How to Get the current month at timezone UTC-10.
    Function module ? which date and time needs to pass.

    Hi,
    Try with following code.
    DATA zdate TYPE  D.
    DATA ztime TYPE  T.
                      CALL FUNCTION 'ISU_DATE_TIME_CONVERT_TIMEZONE'
                        EXPORTING
                          x_date_utc          = sy-datum
                          x_time_utc          = sy-uzeit
                          x_timezone          = 'UTC-10'
                       IMPORTING
                         Y_DATE_LCL          = zdate
                         Y_TIME_LCL          = ztime
                       EXCEPTIONS
                         GENERAL_FAULT       = 1
                         OTHERS              = 2.
                      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
                      ENDIF.
    WRITE : zdate, / ztime.
    Thank you,
    Sekhar.

  • How to get the current month value for a customer exit variable?

    How to get the current month value for a customer exit variable? 
    And also if we have an InfoObject with date value (including date, month, year), then how to derive the month value from this date type of Char.?
    Thanks!

    Hi Kevin,
    Check here........
    Re: Customer Exist for "From Current Date To Month End"
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/25d98cf6-0d01-0010-0e9b-edcd4597335a
    Cal month
    Regards,
    Vijay.

  • How to get the room id & user id in our component

    Hi Experts,
    Collaboration -> Rooms -> Room Directory
    It will show the available rooms
    Select restricted room tab in that.
    That will show the restricted room list, if you are not a member of the room you can request the room by clicking context menu of the room and select the “Request Membership” option. Then it will send the mail to the owner of the room.
    In that UI commend they mapped with the roomid and userid.
    I need to know how to get the room id & user id in our component.
    How to get the Room Id dynamically?
    Can anybody help me for this?
    Helpful answers will appreciate.
    Thanks and Regards,
    Kathiresan R

    Hi Kathiresan,
    you can get the Room ID and the User ID over the API.
    Getting User ID within WebDynpro application:
    IUser user = WDClientUser.getCurrentUser().getSAPUser();
    String logonId = user.getUniqueId();
    Getting User ID within custom Portal Component:
    IPortalComponentRequest request = (IPortalComponentRequest) httpRequest;
    IUser user = request.getUser();
    String logonId = user.getUniqueId();
    Getting Room Id of a user who belongs to this room:
    IUser user = request.getUser();
    IRooms roomsAPI = (IRooms) PortalRuntime.getRuntimeResources().getService(IRooms.PORTAL_SERVICE_ID);
    IRoom[] myRooms = roomsAPI.getAllRoomsForUser(user);
    String roomId = "";
    for (int i=0; i<myRooms.length; i++) {
      IRoom room = myRooms<i>;
      if (room.getName.equals('nameOfRoomToFind')) {
        roomId = room.getId();
    Greets
    Denis

  • Let me know how to get screen size of user..

    Hi.
    I'm going to change a container size in a screen, dynamically.
    I want to know that an user's screen is 1024X768 or others..
    Let me know how to get screen size of user's computer.
    Best Regards.
    Kil - Nam.

    Look at Re: SAPgui window size (+)
    Regards

  • I disabled my iPhone 4 and while doing a restore via iTunes,  it is downloading and timing out so the download is not completing. any idea how to get past that?  I have tried many times and the same error keeps happening.

    I disabled my iPhone 4 and while doing a restore via iTunes,  it is downloading and timing out so the download is not completing. any idea how to get past that?  I have tried many times and the same error keeps happening.

    You need to force the phone into recovery mode, as described here, & restore it:
    http://support.apple.com/kb/ht1808
    Sorry, you've already lost all data on your phone.

  • How to get the  ESS & MSS users in ECC 6.0  into portal

    Hi Experts
    How to get the  ESS & MSS users in ECC 6.0  into portal
    Thanks
    Daya

    Hi,
    You need to have SSO in between ECC and portal and use ABAP engine as your UME.
    then ECC users can directly login to portal using the same user id and password.
    Or you can create the ECC system in portal and user mapping should be done for every user to the ECC system.
    Thanks,
    gopal

  • How to get system status and user status ?

    how to get system status and user status for the given production order?
    In which PP table we can
    find these?
    Thanks&Regards
    Satish

    Hi Ram,
    Use the FM "STATUS_READ" to read both the system and user statuses for an Order.
    Alternatively, the following tables store the user and system status info:
    JSTO- Status object information
    JEST- Individual Object Status
    Hope this helps.
    Let me know if u need further information.
    Regards,
    Sonal

  • How to get past License Acceptance Screen? (PSE8) - Part 2

    Well, I thought I had solved this problem by re-installing PSE 8, since it worked again for a while.  However, now inexplicably it has started having the same problem again (i.e., refusing to get past the license agreement screen even though I click "accept") - see this thread for the first part of this problem/discussion:
    http://forums.adobe.com/message/4823143#4823143
    This time, after trying all the suggested solutions without success, I again tried to just go ahead and re-install PSE8 to solve the problem.  HOWEVER, this time I keep getting an error message during the attempted installation (actually, during the beginning part where it makes you uninstall PSE8 before it will install it again) that prevents the installation from completing.  The error is shown below:
    http://i3.photobucket.com/albums/y96/Cladean/PSE8installerror_zps4fc701de.jpg
    So, I'm stuck and unable to use my copy of PSE8.
    Anybody know how I get past this mess and get it working again?

    OK - thanks for trying to help, but I'm outta here.  After telling me last night that the Adobe Chat service won't support or help me with my PSE 8 problem because it's too old, I D/L'ed and installed the trial version of PSE 11 last night.  It fired up OK last night, but today it said it had some updates to do, so I let it install them.  Now, PSE 11 fails to open.  I tried to chat with Adobe support, explained the problem and gave them a copy of the error message details.
    They then said that the Adobe Chat service will not support or help me solve the problem with their latest version of PSE, because it's the trial version and they only help with the very first launch, and they only support the full version.  I guess they expect me to buy the full version when I can't get the trial version to start and they won't help.  Gotta say, that won't be happening.
    Just for grins, the relevant portion of the chat log is set forth below.
    ======================
    General Info
    Chat start time
    Jan 17, 2013 2:29:49 PM EST
    Chat end time
    Jan 17, 2013 2:49:58 PM EST
    Duration (actual chatting time)
    00:20:09
    Operator
    Basavakumar
    Chat Transcript
    Thank you for your patience.
    info: You are now chatting with 'Basavakumar '
    Basavakumar : Hello. Welcome to Adobe Technical Support.
    Basavakumar : I have received your query. Please allow me a moment to verify your account and to review the details of your request.
    Panthercules: Hello again - I think we chatted last night
    Basavakumar : As I understand that you are unable to work with Photoshop Elements 11.0, am I correct?
    Panthercules: That's correct now - since you couldn't help with my PSE8 problem last night, I decided to try the PSE 11 trial version again to see if I could get that working
    Basavakumar : Thank you for confirming.
    Basavakumar : I will be glad to check and help you with this issue.
    Panthercules: Thanks - here is the error details on the message I'm getting when it stopped working today (after working OK last night):
    Panthercules: Problem signature: Problem Event Name: APPCRASH Application Name: Photoshop Elements 11.0.exe Application Version: 11.0.0.0 Application Timestamp: 505e85c3 Fault Module Name: StackHash_0a9e Fault Module Version: 0.0.0.0 Fault Module Timestamp: 00000000 Exception Code: c0000005 Exception Offset: 00000000 OS Version: 6.1.7601.2.1.0.256.48 Locale ID: 1033 Additional Information 1: 0a9e Additional Information 2: 0a9e372d3b4ad19135b953a78882e789 Additional Information 3: 0a9e Additional Information 4: 0a9e372d3b4ad19135b953a78882e789 Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt
    Basavakumar : May I know what is the exact error message you are getting when you try to launch Photoshop Elements 11.0 application?
    Panthercules: see above
    Panthercules: It starts with the popup saying "Adobe Photoshop Elements 11 has stopped working"
    Panthercules: and then gives the above info as "problem details"
    Basavakumar : Just to confirm before you were able to launch Photoshop Elements 11 application?
    Panthercules: Yes - it installed last night (without choking on the failed PSE8 uninstall as I thought it might), and it launched and imported the PSE8 catalog just fine. I launched it a couple of times last night, just to see if it was working. But when I tried to launch it today to do some scanning, it popped up a message about updates being available. It installed those, but now fails to launch
    Basavakumar : Thank you for confirming.
    Basavakumar : In this case you need to refer the Adobe forums.
    Basavakumar : Please click here Adobe Forums.
    Basavakumar : Please click on the above link to visit Adobe Forums
    Basavakumar :
    Basavakumar :
    Basavakumar : Is there anything else I can help you with?
    Panthercules: So, again you're saying that the Adobe Chat support doesn't support even the latest version of PSE 11 and you can't help me with this?
    Basavakumar : Yes chat support is available for Adobe Photoshop Elements 11 fullversion.
    Panthercules: So, somehow you expect me to buy the full version when the trial version stops working and you can't help me get it working?
    Basavakumar : For trial version support is available only for first launch.
    Basavakumar : So please visit the forums for further assistance.
    Basavakumar : Is there anything else I can help you with?
    Panthercules: No - no point - looks like I won't be needing any support from Adobe as I never plan to buy anything from an outfit with this lousy support - thanks anyway.
    Basavakumar : Thank you for contacting Adobe. Good Bye.
    =======================
    For those of you stuck with troublesome Adobe software, I'm glad you have a helpful Forum here, but I can't see it making any sense to buy any more software from a company that has such crummy official support, so unless my copy of PhotoShop goes belly-up sometime I guess I'm gone.
    Thanks for trying to help folks - too bad Adobe doesn't have the same attitude.

  • HT201210 please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

    please let me know how to get past error msg 11 when trying to restore an ipod touch 4th gen

    Is the iPod jailbroken? Googling shows that error 11 appears if it has been jailbroken.

  • Trying to convert Pages to Word doc, but keep getting this error message:  TypeError:  Object doesn't support property or method 'invalidate'  JavaScript console contains more details.   Any ideas on how to get past this?

    Trying to convert Pages to Word doc, but keep getting this error message:  TypeError:  Object doesn't support property or method 'invalidate'  JavaScript console contains more details.   Any ideas on how to get past this?

    Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Maybe you are looking for

  • Will an unlocked Iphone (originally purchased from AND unlocked by ATT) be able to be used in S. Korea?

    Greetings, I will be traveling to S. Korea in about 4 months (for about a year), and I currently have an iphone 4s purchased through ATT. I am still under contract. Since ATT is now unlocking their iphones for particular customers, I contacted them a

  • Error on starting Live Cache

    Dear All I have a SCM 7.0 application with Live Cache installed. The same was working fine till few days back. However, now, when I am trying to start Live Cache using LC10, I am receiving an error as per the lcinit.log. START ***********************

  • Adobe Flash Errors

    Hi, I encounter some problems with Adobe Flash. Here are some print screens: http://prntscr.com/3w77fj http://prntscr.com/3w7821 Why I encounter these errors? Is like I don't have flash installed but I did have ...

  • A document I updated to the new form of pages won't open up

    I have updated my document to the new pages and gotten the updated form of pages, but it won't let me open up the document once I closed it.

  • Missing Handles

    In Illustrator CS3, I have lost my handles. When I click an object with the direct selection tool, no handles or anchor points appear for what I have selected. Is there anyway to turn this feature back on (I'm assuming I accidentally hit a shortcut)