How to get production version in your contract?

hi all,
I have already maintain multiple production versions for one product, but how can I let it appear in the contract item?
thanks

Hi,
I think I have already answered this one. You can get the curent version either from wwv_usr_menus$ or wwv_modules$
select version from wwv_modules$
where id = <module_id>
and status = 'PRODUCTION'
This gives the version of the current production version.
Thanks
Sharmila

Similar Messages

How to get current version of safari. without having safari browser?

how to get current version of safari. without having safari browser?

I don't understand the question. Safari is a browser.
Can you elaborate on what your are trying to do that initiated the question? People may be able to come up with some other option that gets you working the away you want.
When you respond, please post the version of the Mac OS and the version of Safari you currently have. Otherwise, people are guessing and the quailty of help you get plummets.

How to get the version no. for service po?

Hi,
How to get the version no. for service po?For material po we are getting the version from EKKO-REVNO but for service po Ekko-revno is blank.
Regards,
Rachel.

Hiee,
It is not like service PO does not have revision.
REVNO will only exists for any document if amendment is made after releasing it. If in EKKO for all service PO revision number is blank then test if version management is active for document type
MM->Purchasing->Version management -> External documents
Here check for your doc type and purchase org version management is active.
Regs,
Appie

How to create production version & Explain with procedure

how to create production version & Explain with procedure
Madan

Hi Madan,
Production Versions are used to describe the production process to be used for planned / production order.
Why is it required?
Suppose you have 2/3 production lines and 2/3 alternative BOMs to produce one Finished Goods.
How system will come to know which BOM and Routing to be used. This is done thru Prod.Version.
In production version we maintain the combination of BOM and routing.
Also it can be designed with lot size or validity period.
Go to MM02--->MRP4 / Work scheduling view -
> Prod.Version.
Enter the validity period and lot size. and the production version should be unlocked.
After entering the reqd. routing no. and BOM alternative , carry a check.
After getting the Green signals ,Continue.
Thus you have saved the prod. version.
Mass processing TCode- C223.
Hope it would clarify you the basic of production version.

How to get shadow version of DTP in BI 7.0

How to get shadow version of DTP in BI 7.0..
while activating DTP i got error as :
"Shadow DTP_7KU3789XP6HX9XP3NS6PZ7XAP object can not be resolved - Chain inconsistent"
Please can you suggest me

Check if this note is applicable :
Note 1044054 - Correction: Shadow DTP with DataSource cannot be displayed

How to get Production Order Quantity

I have material number and plant. From this information how to get production order quantity that is displayed in the transaction MD04.
Thanks,
Vinay.

Hi Vinay,
Have you looked FM <b>MD_STOCK_REQUIREMENTS_LIST_API</b>?
Hope this will help.
Regards,
Ferry ianto

"See how to get instant updates on your phone" Doesn't go away. Help?

In the Facebook app when I click on the notifications it says "See how to get instant updates on your phone" at the top. It doesn't go away from the top unless I enable push notifications for it. However, i don't want that. Help?

There are 3 ways to exit a fullscreen app:
Escape key
Command+Control+F
Hover the cursor at the top of the screen until the menu bar drops down then clcik the Arrow icon on the top right.
Have you tried plugging it back into the TV?

How to get a confirmation when your email is delivered or read ?

With Mail app ,How to get a confirmation when your email is delivered or read?

When I send mail with Mail app , there is flying letter pops up. But now I could not see anymore. Do you know how can I active that animation ?
Thanks for your help

How to Get a Version of the ME

I purchase package Adobe CS5, but Can not write in Arabic when in use photoshop or and others like .Illustrator ,Dreamweaver ,InDesign
What is the solution?
How to Make package Adobe CS5 write Arabic
" How to Get a Version of the ME"

Do you want to use an Arabic typeface in PS, or have the PS interface in Arabic?

Hello, I was wondering how to get a version of a PDF document? My Adobe shot down and I have not had time to save my document with the notes had been taken. When I reopened there were no notes on my paper. I have a mac book pro. Thx.

Hello, I was wondering how to get a version of a PDF document? My Adobe shot down and I have not had time to save my document with the notes had been taken. When I reopened there were no notes on my paper. I have a macbook pro. Thx.

Hi Erika1987,
If you have not saved the document and Acrobat closed then it's not possible to retrieve the lost data on the pdf file.
Regards,
Rave

How to get os version on window phone?

how to get os version(8.0 or 8.1) on window phone?

The problem is
WP8.1 has many versions. Sometimes it is very helpful to know the exact version because some versions have limitations
or bugs.
Hong

How can i get production version value(verid) for luck through bdc.

HI..
i have one requirement..that in c223 tcode while i luck the production version through BDC in my report program as i given bellow...i upload mat.no , plant, production version and 1(for luck)...
req:: i want while i given production version for particlular plant and material no...that production version should be luck....
so in standard tcode c223 how can i get value to compair it with my input production version value then i will close that...
program:::
report ZC2232
       no standard page heading line-size 255.
*include bdcrecx1.
Tables : mkal.
data : nodata value '/' .
data : CTUMODE type c value 'E'.
DATA : CUPDATE TYPE C VALUE 'L'.
DATA:   BDCDATA LIKE BDCDATA    OCCURS 0 WITH HEADER LINE.
      messages of call transaction
DATA:   MESSTAB LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
data: begin of HEADER OCCURS 0,
data element: MATNR
        MATNR_001(018),
data element: WERKS_D
        WERKS_002(004),
data element: PLNNR
       PLNNR_003(008),
data element: CP_STTAG
        STTAG_003(010),
data element: ENTRY_ACT
       ENTRY_ACT_005(011),
data element: PLNAL
        PLNAL_004(001),
data element: FLG_SEL
       FLG_SEL_01_006(001),
data element: PLANTEXT
       STLAL_004(002),
       DATUV_005(010),
data element: WERKS_D
       WERKS_008(004),
data element: PLN_VERWE
       ktext_005(001),
data element: PLNST
        DELKZ_005(001),
data element: LOSGRVON
       LOSVN_011(017),
data element: LOSGRBIS
       LOSBS_012(017),
data element: PLNME
       PLNME_013(003),
data element: PLNME
       stlal_014(002),
end of HEADER.
data : begin of it_header occurs 0,
       matnr like marc-matnr,
       werks like marc-matnr,
       verid like mkal-verid,
       mksp like mkal-mksp,
       end of it_header.
data : exnum(40) type c,
       exnum1(40) type c,
       cnt type I,
       CN(2) TYPE C,
       c1 type c value '(',
       c2 type c value ')'.
start-of-selection.
parameters: p_file like rlgrap-filename.
at selection-screen on value-request for p_file.
call function 'F4_FILENAME'
EXPORTING
PROGRAM_NAME        = SYST-CPROG
DYNPRO_NUMBER       = SYST-DYNNR
FIELD_NAME          = ' '
importing
     file_name           = p_file.
start-of-selection.
call function 'WS_UPLOAD'
exporting
CODEPAGE                      = ' '
   filename                      = p_file
   filetype                      = 'DAT'
HEADLEN                       = ' '
LINE_EXIT                     = ' '
TRUNCLEN                      = ' '
USER_FORM                     = ' '
USER_PROG                     = ' '
DAT_D_FORMAT                  = ' '
IMPORTING
FILELENGTH                    =
tables
    data_tab                      = it_header
EXCEPTIONS
CONVERSION_ERROR              = 1
FILE_OPEN_ERROR               = 2
FILE_READ_ERROR               = 3
INVALID_TYPE                  = 4
NO_BATCH                      = 5
UNKNOWN_ERROR                 = 6
INVALID_TABLE_WIDTH           = 7
GUI_REFUSE_FILETRANSFER       = 8
CUSTOMER_ERROR                = 9
NO_AUTHORITY                  = 10
OTHERS                        = 11
if sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
DELETE it_header WHERE MATNR IS INITIAL.
LOOP AT it_header.
*start-of-selection.
*perform open_group.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=ENTE'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL-WERKS'.
perform bdc_field       using 'MKAL-WERKS'
                              it_header-werks.
perform bdc_field       using 'MKAL-MATNR'
                               it_header-matnr.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PICK'.
perform bdc_field       using 'MKAL-WERKS'
                             it_header-werks.
perform bdc_field       using 'MKAL-MATNR'
                            it_header-matnr.
*>>>>>>>>>>>>>>>>>>>>here what logic can i write****
clear cnt.
do 15 times.
cnt = cnt + 1 .
CN = CNT.
exnum = 'MKAL_EXPAND-VERID'.
concatenate exnum c1 cn c2 into exnum1.
*perform bdc_field       using 'BDC_CURSOR'
                               exnum1.
GET PARAMETER ID 'VER' FIELD EXNUM1.
CALL TRANSACTION 'C223' AND SKIP FIRST SCREEN.
if ( it_header-verid = EXNUM1 ).
exit.
endif.
enddo.
****************************************************end***>>>>>>>>
perform bdc_field       using 'BDC_CURSOR'
                              exnum1.
perform bdc_dynpro      using 'SAPLCMFV' '2000'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL_EXPAND-PLNTY'.
perform bdc_field       using 'BDC_OKCODE'
                              '=PRFG'.
perform bdc_dynpro      using 'SAPMSSY0' '0120'.
perform bdc_field       using 'BDC_OKCODE'
                              '=RW'.
perform bdc_dynpro      using 'SAPLCMFV' '2000'.
perform bdc_field       using 'BDC_OKCODE'
                              '/ECANC'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL_EXPAND-VERID'.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '=SAVE'.
perform bdc_field       using 'BDC_CURSOR'
                              'MKAL-WERKS'.
perform bdc_field       using 'MKAL-WERKS'
                              it_header-werks.
perform bdc_field       using 'MKAL-MATNR'
                              it_header-matnr.
perform bdc_dynpro      using 'SAPLCMFV' '1000'.
perform bdc_field       using 'BDC_OKCODE'
                              '/EBACK'.
perform bdc_transaction using 'C223'.
endloop.
*perform close_group.
*&      Form bdc_dynpro
      text
     -->P_0161   text
     -->P_0162   text
form bdc_dynpro USING PROGRAM DYNPRO.
CLEAR BDCDATA.
BDCDATA-PROGRAM = PROGRAM.
BDCDATA-DYNPRO   = DYNPRO.
BDCDATA-DYNBEGIN = 'X'.
APPEND BDCDATA.
endform.                    " bdc_dynpro
*&      Form bdc_transaction
      text
     -->P_0351   text
form bdc_transaction USING TCODE.
call transaction 'C223' using bdcdata
                         mode    CTUMODE
                         update CUPDATE
                         messages into messtab.
if sy-subrc <> 0.
message e000(zmm01) with
'Check your input data'.
endif.
endform.                    " bdc_transaction
*&      Form bdc_field
      text
     -->P_0346   text
     -->P_0347   text
form bdc_field USING FNAM FVAL.
if fval <> nodata.
    CLEAR BDCDATA.
    BDCDATA-FNAM = FNAM.
    BDCDATA-FVAL = FVAL.
    APPEND BDCDATA.
    endif.
    endform.                    " bdc_field

l_nl := dbms_xslprocessor.selectNodes(l_n, '/TaxInvoice/TaxInvoiceDocument');try to change as follow
l_nl := dbms_xslprocessor.selectnodes(l_n,'/TaxInvoice/TaxInvoiceDocument','xmlns="urn:kr:or:kec:standard:Tax:ReusableAggregateBusinessInformation:1:0"');Edited by: AlexAnd on Aug 17, 2011 12:36 AM

How to get extension version number to update in exchange panel.

I was able to upload my Illustrator extension, set it to private and share it. Brialliant functionality. Now I have released a point update, and although it shows the correct version in the extension details on the Adobe Exchange website, the version number will not update in the panel itself, although my description modifications update just fine. The extension as shown in the "Not Published" list of the sight has the old version number. When I click on it to get to the main extension page, it shows the correct version number in title and in also correct in the details on the right. It does say "(Preview)" after the name. I don't intend to ever sell it, but want to keep sharing it privately. How do I get it to recognize version updates?
Thanks

Hi there,
It sounds to me like the reason your new patch (with the updated product version) is not showing in the panel is that it has not been "published". If it's showing up in the "Not Published" screen, this means that it's only available for you personally to make changes to in the producer portal - once you're finished making your changes (uploading a new ZXP etc.) you need to click Submit (with Auto-Publish) to make the new version go live to the people it's shared with (and show up in the panel). As long as the product is set to Private, clicking Submit (with Auto-Publish) will not make the product available publicly - it will continue to be private, visible only to the groups you specify.
Fraser

How to create production version for multiple BOM & Routing ?

If I have 3 BOMs ( A, B & C ) and 2 Routing ( 1 & 2 ) for material XYZ then how then production version will be created ? I feel that there will be 6 PVs.
combination of A1, A2, B1, B2, C1 & C2. but some one told me that I have to create duplicate routing of 1 & 2
with number 3 & 4 and use it for bom B, and another duplicate Routing with number 5&6 and use it for BOM C.
in this case my PV data will be like this A1, A2, B3, B4, C5, C6.
Please guide me which way is correct. I feel that the first way is right, because in that case I have 2 routing in system, and in second way I have total 6 routings for that product. please guide me.

Hi Archana
If you are doing component allocation with routing ,
routing for material 1 counter 1 you are choosing alternate Bom 1 or 2 for material.
similarly for Material 1 counter 2 you are choosing alternate Bom 1 0r 2 according to your choice
like this 3 routing groups will get created with each have 2 counters
if you allocate similar kind of material in one group in material allocation tab & you are going for component allocation it will assign one material bom.
second material bom will not get assigned to the operation.
if you are not going assign the component at the routing level than you can follow first process.
if you are planning to allocate components at routing level than you have to follow second process.
If have any more doubt kindly revert back with your query.
Thanks & Regards
Sandeep Kumar Praharaj

How to get Production Order wise Actual Values

Dear CO Experts,
How to get Actual Values (Raw Material Issue, Activity Confirmations & OH Calculations & Goods Receipts from Production) each Production Order wise ?
My Scenario is Product Cost Collectors (PCC) with Production Orders.
If we select above scenario Production Order is Statistical and PCC is real cost object.
For PCC is Period wise we can track the cost Periodically in individual Material.
But my client is asking how to see the each Production Order wise Actual values. Is there any T.Code ??
In Production Order I am able to see only Plan values (CO03).
Waiting for your favorable reply.
Regards,
KBR.

Hi Bhaskar
You are in Alaska and you wanna eat vegetarian food
You cant get values at Prod order level if you have chosen PCC as cost object.... You will only get Qty at Prod order level
To get a bird's eye view of costs incurred in PCC, execute report MCRY with PCC as the input... MCRX shows only Qty info for components
br, Ajay M

How to get production version in your contract?

Similar Messages

Maybe you are looking for