How to get query used in LOV
Hi all,,,
Assume that my lov is listing (eg empno, ename,dept) when i query for empno. Actually i want to change that empno to deptno ie(deptno,ename,dept) when i queried for empno. How to accomplish this. I think by form personalization we can do ie. BY creating own record group and replacing that with old one, we can do. But i want to know the query used in old record group. How to accomplish this task. plz help me.. Its urgent ... plz... Advance thanks. Any other approach most welcome.. Plz
Hi all,,,
Assume that my lov is listing (eg empno, ename,dept) when i query for empno. Actually i want to change that empno to deptno ie(deptno,ename,dept) when i queried for empno. How to accomplish this. I think by form personalization we can do ie. BY creating own record group and replacing that with old one, we can do. But i want to know the query used in old record group. How to accomplish this task. plz help me.. Its urgent ... plz... Advance thanks. Any other approach most welcome.. Plz
Similar Messages
-
How to get actual value from LOV list
Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
Thanks.Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
<html:select property="UserJobCompanyId"
disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
onchange="submitform();">
<html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>
</html:select>and I want to get CompanyID of selected Company.
Thanks, again. -
How to get query execution time without running...?
Hi ,
I had one requirement .... as follows ......
i had 3 sql statements . I need to execute only one sql which execution time is very less.
Can any one help me , how to get query execution time without running that query and without using explain plan..?
Thanks,
RajeshKim Berg Hansen wrote:
But you have ruled out explain plan for some reason, so I cannot help you.OP might get some answers if query was executed before - but since restart. Check V$SQL dynamic performance view for SQL_TEXT = your query. Then ROUND(ELAPSED_TIME / EXECUTIONS / 1000000) will give you average elapsed time.
SY.
Edited by: Solomon Yakobson on Apr 3, 2012 8:44 AM -
In ABAP HR how to get job using position
In ABAP HR how to get job using position (Using Infotype 1001)
Hi anilkumar,
1. u have the position
u want the Job
2. In hrp1001 table
OTYPE = 'S' (for position)
OBJID = POSITION (AS ABOVE)
SCLAS = 'C' (for finding job)
<b> SOBID = XXXXXX (here u will get the JOB)</b>
regards,
amit m. -
How to get query result in comma dilimited text or excel file?
Does anybody know how to get query results in comma delimited
text file or excel file, I tried spool abc.txt, but the result
showed some ------ lines
ThanksTry doing this in your sql scripts
set heading off
set pagesize 0
set linesize 4000
set feedback off
set verify off
set trimespace on
set colsep ","
spool output.txt
select * from dual (or whatever you are querying
spool off
There may be a couple other set statement that you could add but
this should get you started in the right direction -
How to get image using Http and how to save in Smulator
Hi guys,
Am working in black berry bold. i dont know how to get image using htp connection and one more thing i need to save this image in side simulator directory............. what are the specific API i should...
Guide me.........If you want the input image size you need to pass it in as parameters.
A discussion thread on this topic is:
http://forums.adobe.com/thread/29948
-- Daniel R. <[email protected]> http://danielr.neophi.com/ -
Hi out there. To capture a screen shot one uses: Command-Shift-3 or 4. I have done this for a long time. Now suddenly neither screen shot command works anymore. Suggestions how to get this useful function back? Thanks, Georgx
Command-Shift-3 and 4 works just fine on several Macs that I have here.
Try restarting your Mac....or post in the specific support area for your Mac model....for more advice.
https://discussions.apple.com/index.jspa -
Suppose I've made MS Access database and want my Java application to read query objects from that database.
I'd like to get them as an array of Strings or as an collection of other type of objects.
How to get them?
I'm using JBuilder 4 Ent.I don't understand the question.
You use JDBC to communicate with the database. You create a query. You extract the data from the query and put it into whatever you want - like a collection. The JDBC tutorials explain how to use JDBC - is that what you want to know? -
WAD: How-to get query name and pass to URL
Hi,
The task: In a BI 7.0 web template - get the technical query name and use that to open a URL in the format http://<MYURL>&DOCUMENTATION=<QUERYNAME>. So:
1) User clicks an icon
2) Get technical name of query
3) Open the documentation for that query using a URL
How can this be done? Do I have to use the Custom Extension web item and implement a new class using the interface IF_BICS_CONS_WEBITEM_CUST_EXIT? If so, do you have an example of how this can be done? OR even better is there an easier way to accomplish this?
Thanks in advance,
JacobHi Daniel,
you could get the query name in ABAP code, also. Here is a snippet from the execute method. The Query name should be in l_sx_view at the end.
best regards
Arne
TYPE-POOLS:
rrx1.
DATA:
l_string TYPE string,
l_xml TYPE string,
l_xml_xstring TYPE xstring,
l_sx_view TYPE rrx1_sx_view,
* Line Feed, CR
c_lf TYPE string,
l_h_lf(2) TYPE x VALUE '0D0A',
l_r_conv TYPE REF TO cl_abap_conv_in_ce.
* Get the line feed and carriage return for unicode
l_r_conv = cl_abap_conv_in_ce=>create( input = l_h_lf ).
l_r_conv->read( IMPORTING data = c_lf ).
DATA:
l_t_data_providers TYPE cl_bics_cons_webitem_util=>tn_t_data_provider,
l_s_data_providers TYPE cl_bics_cons_webitem_util=>tn_s_data_provider,
l_r_variable_container TYPE REF TO if_ixml_node.
CLEAR e_xml.
TRY.
* All data passed to the webitem exit is hold in I_XML using XML.
* The XML is UTF-8 encoded. You can convert the UTF-8 xstring
* to a simple ABAP string by calling the following method:
* ==================================================================
CALL METHOD cl_bics_cons_webitem_util=>utf8_xstring_2_string
EXPORTING
i_utf8_xstring = i_xml
RECEIVING
r_string = l_xml.
* The XML includes sections about the used data provider and about the
* variable container. The following method parses the XML and
* provides the IF_IXML_NODE instances for data providers and for the
* variable container.
* ==================================================================
CALL METHOD cl_bics_cons_webitem_util=>parse_xml
EXPORTING
i_xml = i_xml
IMPORTING
e_t_data_providers = l_t_data_providers
e_r_variable_container = l_r_variable_container.
* 01 Get name of first Data Provider
READ TABLE l_t_data_providers INDEX 1 INTO l_s_data_providers.
CALL TRANSFORMATION bics_cons_webitem_filter_by_dp
PARAMETERS dataprovider = l_s_data_providers-name
SOURCE XML i_xml
RESULT XML l_xml_xstring.
CALL METHOD cl_bics_cons_state_converter=>convert_xml
EXPORTING
i_xml = l_xml_xstring
IMPORTING
e_sx_view = l_sx_view. -
How to get Query from bw?
I use BI XMLA Connector to connect BW System,I want to get QUERY.But I only get the DATA.I want to get the Query completely,
include style,navigation,and so on.not a table.
WHAT CAN I DO?HI,
It is seemed rather odd that WEBI does not use the MASTER DATA search that is defined in the BEX query, the UNV based on.
We are talking about objects that have less than 200 values in the MASTER DATA, usually it is an Authorization Object, that the User needs to select from it during runtime.
We can also change the maximum value listed from MASTER DATA to be higher than 200.
This is very poor performance to get the LOV after several minutes instead of few seconds.
>> first of all the BI authorization you configure are not relevant for master data unless you are using authorization variables and BEx does a paging of the values - it does not retrieve all values. it does retrieve the values in chunks
Using delegating search is not always possible when the user needs to select random values.
Although delegate search improved getting the LOV from 5 minutes to 2 minutes (in our case), still waiting for 2 minutes,
just to get the LOV is very long time for an enduser. (and now he has to wait for the WEBI query to be executed).
>> using delegated search is possible. and delegated search means you are not retrieving a list of values at all so the 2 min that you mentioned indicates you didn't configure it properly.
Ingo -
How to get Query response Time?
II am on BI 7.0. I ran some queries using RSRT command. I want to find how much time the queries took.
I went to
st03 -> expert mode -> BI system load-> select today / week/month according to the query runtime day
I do not see any Info Providers. Query was on a cube so why no Info Providers.
Does something have to turned on InfoPorvider to show.
When I look in RSDDSTAT_OLAP table, I do see many rows but cannot make any sense. Is there some documentation on how to get total query time from this table?
Is there any other way to get query response time?
Thanks a lot.HI,
why not use RSRT ? You can add database statistics option in "Execut & Debug" and you get all the runtime metrics of your query
In transaction RSRT, enter the query name and press u2018Execute +Debugu2019.
Selecting u2018Display Statistics Datau2019 .
After executing the query will return a list of the measured metrics.
The event id / text describes the steps (duration in seconds):
"OLAP: Read data" gives the SQL statements repsonse time (ok - because the SAP
application server acts as an Oracle client a little network traffic from the db server is included,
but as far as you not transferring zillions of rows it can be ignored)
But it gives you much more (i.e. if the OLAP cache gets used or not )...
In the "Aggreagate statistcs" you get all the infoproviders involved in that query.
bye
yk -
Hi,
I have this xml file stored in operator.xml
<Operator>
<Customer>
<Name>sam</Name>
<Street>albert str.</Street>
<ZipCode>45454</ZipCode>
<City>NY</City>
<Country>USA</Country>
<EMailAddress>[email protected]</EMailAddress>
<MeterNumber>1000</MeterNumber>
<MeasuringUnit>kWh</MeasuringUnit>
<Reading>
<Month>1</Month>
<Value>900</Value>
</Reading>
<Reading>
<Month>2</Month>
<Value>725</Value>
</Reading>
<Reading>
<Month>3</Month>
<Value>950</Value>
</Reading>
</Customer>
</Operator>I have the following getter statements in my code:
String name=req.getName();
int month=req.getMonth();Now, I want to get value for particular customer (by checking name for equality with getter) and for particular month( by checking for equality with getter).
I have written the following statements:
final String filename="operator.xml";
SAXBuilder builder=new SAXBuilder(true);
Document doc=builder.build(filename);
Element root=doc.getRootElement();How to proceed further using JDOM. I am confused with getChild(), getChildText() etc.,
thanks,Obtain values with the JDom XPath class selectSingleNode and selectNodes methods.
SAXBuilder saxBuilder=new SAXBuilder("org.apache.xerces.parsers.SAXParser");
org.jdom.Document jdomDocument=saxBuilder.build(new File("c:/input.xml"));
org.jdom.Element zipcodeNode= (org.jdom.Element)(XPath.selectSingleNode(jdomDocument,"/Operator//Customer/zipCode")); -
How to get InitialContextFactory using RMI/IIOP without using weblogic.jar
Hi Robert
I know this is an old post. but I am interested in knowing how to get the
initial context using RMI/IIOP without the use weblogic specific classes
like weblogic.jndi.WLInitialContextFactory . If you have a code snippet that
you can provide as an example, it would be just great.
thanx in advance
Daya Sharma
See comments inline...
Stewart Wachs wrote:
I would like to get an initial context to Weblogic JNDI from a client.
code snippet:
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFacorty");
ht.put(Context.PROVIDER_URL, "t3://localhost:7001");
try {
Context ctx = new InitialContext(ht);
catch(...) {
This works fine when I include weblogic.jar (and other dependend weblogic
jar's) in the classpath.
Is there a way to access WL JNDI from a client without the weblogicclasses
in the classpath?If you are using WLS 6.1, you could use RMI/IIOP to do this but in general,
the
answer is no, you will need at least some of the weblogic classes on the
client.
If not, is there a lightweight jar available for distribution for client
JNDI connectivity?This is something in the works. In addition, a colleague and I are working
on
a white paper that describes the "Thin Client Options with WebLogic Server"
that we hope to make available in the not too distant future...
Are there any licencing issues with distributing the weblogic classes to
clients that need to access WL JNDI?No. WLS is licensed by the server so you are free to distribute
weblogic.jar
to your clients.
Hope this helps,
RobertTake a look at the RMI/IIOP section of our whitepaper "Small Footprint
Client options for BEA WebLogic Server" at:
http://dev2dev.bea.com/resourcelibrary/whitepapers.jsp?highlight=whitepapers
Daya Sharma wrote:
Hi Robert
I know this is an old post. but I am interested in knowing how to get the
initial context using RMI/IIOP without the use weblogic specific classes
like weblogic.jndi.WLInitialContextFactory . If you have a code snippet that
you can provide as an example, it would be just great.
thanx in advance
Daya Sharma
See comments inline...
Stewart Wachs wrote:
I would like to get an initial context to Weblogic JNDI from a client.
code snippet:
Hashtable ht = new Hashtable();
ht.put(Context.INITIAL_CONTEXT_FACTORY,
"weblogic.jndi.WLInitialContextFacorty");
ht.put(Context.PROVIDER_URL, "t3://localhost:7001");
try {
Context ctx = new InitialContext(ht);
catch(...) {
This works fine when I include weblogic.jar (and other dependend weblogic
jar's) in the classpath.
Is there a way to access WL JNDI from a client without the weblogic
classes
in the classpath?
If you are using WLS 6.1, you could use RMI/IIOP to do this but in general,
the
answer is no, you will need at least some of the weblogic classes on the
client.
If not, is there a lightweight jar available for distribution for client
JNDI connectivity?
This is something in the works. In addition, a colleague and I are working
on
a white paper that describes the "Thin Client Options with WebLogic Server"
that we hope to make available in the not too distant future...
Are there any licencing issues with distributing the weblogic classes to
clients that need to access WL JNDI?
No. WLS is licensed by the server so you are free to distribute
weblogic.jar
to your clients.
Hope this helps,
Robert -
How to get or use "kTextFrameOversetChangeMsg" as serviceid?
Hi all
I've developed a small plugin for handling textframe overflow. I've used service ids "kBeforeSaveDocSignalResponderService", "kBeforeSaveAsDocSignalResponderService". But actually I've to run it, only when overflow occurs.
Steven suggested to use "kTextFrameOversetChangeMsg". I tried, but I dont know exactly how to use it as service id. Could anyone suggest on this?
thanks in advance
A.HakkimThank u both. Pls suggest me how to get serviceid from "kTextFrameOversetChangedMsg".
-
How to get query response time from ST03 via a script ?
Hello People,
I am trying to get average query response time for BW queries with a script (for monitoring/historisation).
I know that this data can be found manually in ST03n in the "BI workload'.
However, I don't know how to get this stat from a script.
My idea is to run a SQL query to get this information, here is the state of my query :
select count(*) from sapbw.rsddstat_olap
where calday = 20140401
and (eventid = 3100 or eventid = 3010)
and steptp = 'BEX3'
The problem is that this query is not returning the same number of navigations as the number shown in ST03n.
Can you help me to set the correct filters to get the same number of navigation as in ST03n ?
Regards.Hi Experts,
Do you have ideas for this SQL query ?
Regards.
Maybe you are looking for
-
Do I have to purchase the new Numbers to replace my version 2.3 in order to open spreadsheets already created? Will the new version work with my OS - 10.8.5?
-
Can't access shared library to import. Why?
When trying to access sharing, library will not come up in iTunes so that it can be imported. Can anyone tell me why?
-
Seagate external USB harddrive
i just purchased a Seagate external USB harddrive. in the manual, they say they do not recommend using the HD "to share data between windows and macintosh operating systems". they say i should initialize it for a Mac OS. i did see a post here that sa
-
i have tried solutions posted on 3 different threads to fix this error when trying to upgrade to the new itunes and when trying to re-install 6.05. nothing works and i keep getting the same error message. please help
-
Deactivate batch job for purchase requisitions on perticulra plant
Dear Freinds, I have to deactivate batch job for purchase requisitions on plant 1020. Can you guide me how can i do this...........?