How to get stems (or splits) when working cross platform.

not sure how useful this is for some of you, but nearly ever artist i'm currently writing songs with uses some other program, so this is a huge time saver for me.
an audio engineer friend had offered to mix my recordings i'd been making. he is fluent in pro tools, has some great outboard gear, and didn't want to mix in garageband. the only way we could figure to get my loops i'd created into his computer, was to solo each track and one by one export to itunes. try doing this with 15 tracks on a 5 minute song, and you'll soon realize what a waste of time it is.
fast forward to this morning, when a co-worker and i were chatting about what locking tracks does for the performace of playback. we locked every track on a huge file i had (and let it play down). we right clicked on the garageband file, and selected "show package contents", and low and behold, in a folder named "freeze files" were each track bounced as an aif.

To add to your experience: If you look into the "Media" folder, you'll find the uneffected audio files - if you want to do the mixing in ProTools and add effects there, it might be the better way to use these instead of the mixed down tracks that you find in the "Freeze Files" folder.

Similar Messages

How to get lower-quality previews when working with Full-HD?

I'm working with Full-HD video, but I don't need preview (rendered) files to be 1920x1080 too. It takes a lot of disk space and a lot of time to render preview files.
Is there a way to have them some lower quality? For example 720x405 resolution would be enough.
But when I want to make a final export, I need to get Full-HD video.
Thanks!

Use a Custom sequence and change the previews as desired.

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?

How to get UTF-8 encoding when create XML using DBMS_XMLGEN and UTL_FILE ?
Hi,
I do generate XML-Files by using DBMS_XMLGEN with output by UTL_FILE
but it seems, the xml-Datafile I get on end is not really UTF-8 encoding
( f.ex. cannot verifying it correct in xmlspy )
my dbms is
NLS_CHARACTERSET          = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET     = AL16UTF16
NLS_RDBMS_VERSION     = 10.2.0.1.0
I do generate it in this matter :
declare
xmldoc CLOB;
ctx number ;
utl_file.file_type;
begin
-- generate fom xml-view :
ctx := DBMS_XMLGEN.newContext('select xml from xml_View');
DBMS_XMLGEN.setRowSetTag(ctx, null);
DBMS_XMLGEN.setRowTag(ctx, null );
DBMS_XMLGEN.SETCONVERTSPECIALCHARS(ctx,TRUE);
-- create xml-file:
xmldoc := DBMS_XMLGEN.getXML(ctx);
-- put data to host-file:
vblob_len := DBMS_LOB.getlength(xmldoc);
DBMS_LOB.READ (xmldoc, vblob_len, 1, vBuffer);
bHandle := utl_file.fopen(vPATH,vFileName,'W',32767);
UTL_FILE.put_line(bHandle, vbuffer, FALSE);
UTL_FILE.fclose(bHandle);
end ;
maybe while work UTL_FILE there is a change the encoding ?
How can this solved ?
Thank you
Norbert
Edited by: astramare on Feb 11, 2009 12:39 PM with database charsets

Marco,
I tryed to work with dbms_xslprocessor.clob2file,
that works good,
but what is in this matter with encoding UTF-8 ?
in my understandig, the xmltyp created should be UTF8 (16),
but when open the xml-file in xmlSpy as UTF-8,
it is not well ( german caracter like Ä, Ö .. ):
my dbms is
NLS_CHARACTERSET = WE8MSWIN1252
NLS_NCHAR_CHARACTERSET = AL16UTF16
NLS_RDBMS_VERSION = 10.2.0.1.0
-- test:
create table nh_test ( s0 number, s1 varchar2(20) ) ;
insert into nh_test (select 1,'hallo' from dual );
insert into nh_test (select 2,'straße' from dual );
insert into nh_test (select 3,'mäckie' from dual );
insert into nh_test (select 4,'euro_€' from dual );
commit;
select * from nh_test ;
S0     S1
1     hallo
1     hallo
2     straße
3     mäckie
4     euro_€
declare
rc sys_refcursor;
begin
open rc FOR SELECT * FROM ( SELECT s0,s1 from nh_test );
dbms_xslprocessor.clob2file( xmltype( rc ).getclobval( ) , 'XML_EXPORT_DIR','my_xml_file.xml');
end;
( its the same when using output with DBMS_XMLDOM.WRITETOFILE )
open in xmlSpy is:
<?xml version="1.0"?>
<ROWSET>
<ROW>
<S0>1</S0>
<S1>hallo</S1>
</ROW>
<ROW>
<S0>2</S0>
<S1>straޥ</S1>
</ROW>
<ROW>
<S0>3</S0>
<S1>m㢫ie</S1>
</ROW>
<ROW>
<S0>4</S0>
<S1>euro_</S1>
</ROW>
</ROWSET>
regards
Norbert

How to get Manager id automatically when Employee Id is given.

How to get Manager id automatically when Employee Id is given.
1) I created a simple BO with two elements namely
1.Employee Id
2.Manager id
How to get employee's first name and last name?
And how will i get manager id automatic when i click employee id in element field.
Anbu.

Have you tried to use "APPS.FND_CONCURRENT" API?
http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE
http://etrm.oracle.com/pls/trm11510/etrm_pnav.show_object?c_name=FND_CONCURRENT&c_owner=APPS&c_type=PACKAGE%20BODY
Thanks,
Hussein

How to get those Char Description when i record please give a solution

Hi Experts
when i try to extend using BDC the meterial all data is getting copied to new plant but in MRP3 Configure varients is not getting copied in bdc i am getting all the values from parent plant but these values are not getting displayed in new plant for only *MRP3 Configure varients
how to get those values please give a solution
and
when i am trying to make the BDC recording of creation of meterial in this process
in MRP3 when i give configurable meterial = Lamp or CT or VOLTMETER and when
i go for configurevariants button it's not displaying any Char Description for the perticular meterial
but in general when i creat a material process there Char Description are coming where i can give the values
how to get those Char Description when i record please give a solution

Hi Maen Anachronos
i am Getting popup where i can give any value
but in creation of meterial for a perticular config meterial there is will be 1 templete in which we will get some constant Char Description where we'll have some options to give the value
but when it 's done in BDC Recording it's not displaying any values Char Description then how can we decide the values to what to give when Recording

How to get the search option when we are creating new view

Hi,
How to get the search functionality when we are creating new view.
Ex:- if we see the standard component BT112S_SC. Under this
AdvancedSP is the view,
same kind of view if i want to create new view with same bol entity in my new component. I am unable to get that search functionality.
for search functionality,,i think view should inherit the super class CL_BTSRV_ADVS_CNTRL, but in my new view controller class, i am unable to find this class.
Can anybody give me some inputs on this.
Thanks,
neelam

In case you are still not able to proceed please refer the following blog.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view
Regards,
Harshit

How to get on your ipad when it is disabled

how to get on your ipad when it is disabled

FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...

Does anyone know how to get a imessage back when deleted

does anyone know how to get a imessage back when deleted

The only way is to restore from a backup that has the message you want. If you do this you will lose anything since that backup.

How to get micro sd card to work

how to get micro sd card to work.. my phone says total space 7.40GB for sSD card and that's whats available. I put a micro SD card in but no change?

You put the card in and go to settings and go to storage and scroll down to sd card and click mount ad card

How to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

how to get imac 27 inch to work with asus triple mionitors to work through matro triple head 2 go

I think I got a little ahead of myself explaining my problem, so let me clarify...
Only the one iMac is having the network file deletion problem, but it is included in the network user logon problem. So 4 out of 5 of the iMacs have had or are having logon problems with network users accounts using mobile accounts on the systems. 2 of the 4 I have wiped and started over on and the other 2 have different network accounts being used by the primary system users. The 5th iMac has not caused any problems except I forgot to mention that the USB on it seems flaky.
So we are apparently full of problems.

Does anyone know how to get an animated screen saver working

Hi I have a imac desktop not even a year old. Does anyone know how to get an animated screen saver working please. Its a gimp screen saver and is it safe to use on my mac?

Go to the website from where you got the screensaver from and read its system requirements and instructions for installation.

Can I use Messages in OSX to text with a person on an Android platform? My iPhone works cross platform but I don't get the text in Messages on my desktop with OSX 10.8.2

Does "Messages" in OSX 10.8.2 work cross platform? My daughter has an android phone and I can text with her OK in iOS. However, her texts don't show up on OSX whereas texts from my son, who has an iPhone, work in iOS and OSX.

HI,
The answer is yes and no.
As Barney-15E link says you can get the Messages app to SMS to AIM Buddies. Or rather telephone Numbers as AIM Buddies.
There are limits.
The computer has to be set as if in the United States (System Preferences > Language and Text > Region)
The phone is question has to be on a carrier that supports AIM SMS forwarding which only applies to some US based carriers.
The reason the SMS Messages arriving on the iPhone do not sync is that they are not iMessages (the "No" Part).
I use Messages with the Buddy List Showing.
As a test I have added a made up number as a Buddy and also created a Address Card for it.
So Mousing over the "Buddy" reveal the "Screen Name" which is the phone Number
You have to include the Leading +1 country code as well.
9:32 PM Thursday; March 14, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How to get the wireless router to work when i change to new modem and internet connection

I already set up my wireless router in my macbook but then moved to a new house and basically have a new internet connection. My internet connection is fine when i connect the ethernet cable form the modem to my macbook. But when i plugged in the wireless router, my computer sees it but will not connect to the internet. I lost my installation CD and i tried to re-install using the dowloaded installation but it goes into error saying i can't re-install if i don't change back to default.. anyway, maybe the solution is simple but it eludes me so please help!
In summary:
1. same macbook
2. same wireless router
3. same internet provider but new connection and modem (since i moved to a different house)
how do i get my wireless router to work? thanks!!!

Who is your Internet Service Provider(ISP)?
If you have a cable connection then follow this link and if you have a DSL connection then follow this link to configure your router.

How to get Motion Tracking Mode to work?

How do I get "Motion Tracking Mode" to work? I click the icon and nothing happens, its like greyed out.

scouterbsa
Here is my check list for you to review regarding using Motion Tracking Mode in Premiere Elements 10 on Windows 7 64 bit.
1. You need a video and with enough motion in the object in it to track it. Color contrast between the object and its background can be important to success.
I created a DV AVI 4:3 in which I have a circle moving, and I have used a butterfly Clip Art from Premiere Elements 10 to track to track the circle as it moves in the video. In this example, you see the object only at 0 time.
2. Select/highlight the clip on the Timeline. And then click on the Motion Tracking Mode icon above the Timeline.
You should next see the following Motion Tracking dialog asking for a Yes or No to the question "Run
Auto-Analyzer to track moving objects?" Click No.
3. At this point, you will see a bounding box on screen. That bounding box should be placed using the mouse cursor on the object
that is going to be tracked, in this case, the circle. Resize and position the bounding box accordingly.
4. Once you have the bounding box on the object and resized, click on Track Object at the top right of the monitor.
The screenshot below shows only the before clicking Track Object at the top right of the monitor.
When that action is finished the bound box edges will be an orange yellow color. I have skipped over a screenshot
for the latter.
5. With the orangel yellow bounding box in place, next drag the Clip Art (in this case, Butterfly 02) from the Clip Art display area toward and into the orange yellow bounding box frame. The orange yellow bounding box frame will turn blue. That is the first sign of success.
Hit the Enter key of the computer main keyboard and watch the results. The Butterfly should track the circle's
movement in the clip. The duration of the clip and the continuity of the object's motion in the clip can be other factors.
If you do not succeed, try again with a different video clip (one with more movement and color contrast.
The above is a best case scenario. If it is speech bubbles that you are having problems with as well, we will deal with them next.
Right now it seems like you are having problems getting started rather than having a problem with a specific Clip Art that you are
using to track the object in your video.
We will be watching for your results.
ATR

How to get stems (or splits) when working cross platform.

Similar Messages

Maybe you are looking for