How to get the Hardcoded text and the Standard text in the same line

Hi,
I have an SAP Layout. In that, it should show the Consignee name as below.
     Consignee: SAP LABS
In this, the text 'Consignee: ' should be hardcoded in the layout itself. and the customer has requested to create a standard text for 'SAP LABS' sothat if they want to change the value in future, they would go and change the Standard text. I have created the Standard Text for SAP LABS. I am not able to get both these texts on the same line. I wrote in the layout like below and AS is the Paragraph format.
AS     Consignee:
/:        INCLUDE ZVRU_CONSIGNEE OBJECT TEXT ID ST LANGUAGE EN PARAGRAPH 'AS'
But, both are coming in dofferent lines. As /: is a command line, it is coming in the next line. Is there any way of getting these two texts in the same line..? While Inserting the Standard Texts, will there be any option/command to print it in the same line..?
Please share your thoughts. Thanks in advance.
Thanks & Regards,
Paddu.

Hi Paddu,
I have had a similar requirement. I did not use any FM or anything, simply did the following:
In SO10, for your standard text where u have used the text SAP LABS.
Instead of P1/ default para, change it to =. And then Save ur Standrd text.
Now in the SAPScript Text editor in which you want to print
P1 'Consignee :'
/: INCLUDE TEST OBJECT TEXT ID ST LANGUAGE EN
the output will be
Consignee : SAP LABS
I have tried and tested this method. It will surely work.
With regards,
Niharika.

Similar Messages

"Data only" csv export. How to get the same data?

When I export to csv I get more data than when exporting to "data only". Why and how to get the same as when using "data only". I suppose it is because of some supressed lines, but why there is difference in the view (which is right) and in the export file?
I do not want to export to xls with "data only" and save as csv, because the exported csv is being read by another application, which is unable to convert it automatically.
The other way is to put constraints in the data selection for the whole report (and not by supressing lines). How to say {table.date}>=maximum({table.date}) in the in the data selection? There is not possible to use "maximum". Probably possible with array?
Thanks in advance
Edited by: Kiril Bojilov on Aug 4, 2009 12:34 PM
Ok, I managed it: I put the constraint in the group selection
Edited by: Kiril Bojilov on Aug 4, 2009 12:46 PM

New customers get more options because new customers didn't already agree to complete a 2yr contract before being able to get a new phone. If you had a line that wasn't under contract, you would get a better deal than new customers because while they pay $35 activation fee for a new line, you pay $30 upgrade fee for using an upgrade. You just have to finish your end of the deal before you can start a new one.

How to get the same look as flash for borders?

Hi i have selected circle and filled the circle with some color. now i want to have border around the circle so i have saelected stroke from the edit menu and applied with one pixel. how ever it is not giving a solid look as in flash. in photoshop the border looks like disolved and transparent. is there a way to get the same look as flash?

Look at the image. i have described everything there in the image itself. even when we use layer style it is the same problem. is there a way to resolve this? the text in the image is as below.
if u carefully observe the circle pointed there is a slight gap between the border and the filled color. This is not good. i dont want any gaps between the border and the filled color. I have used bucket to fill the circle and used stroke from edit menu to get the border for the circle.

How to get the Grid lines in the background of bar chart

How to get the background of bar chart given in the following link
http://javafx.com/docs/articles/controls/barChart.jpg
thanks in advance

Set the border attribute of the table tag to zero. Use CSS to assign your borders like this -
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>Untitled Document</title>
<style type="text/css">
table {
          border-collapse:collapse;
          border:1px solid black;
tr {
          border:1px solid black;
tr.top {
          border-bottom:none;
tr.bottom {
          border-top:none;
</style>
</head>
<body>
<table width="600" border="0">
<tr class="top">
    <td> </td>
    <td> </td>
    <td> </td>
</tr>
<tr class="bottom">
    <td> </td>
    <td> </td>
    <td> </td>
</tr>
<tr>
    <td> </td>
    <td> </td>
    <td> </td>
</tr>
</table>
</body>
</html>

I bought my I Phone 5S from Dubai, it doesnt have facetime, how to get the same on my I phone. I am based in India

I am based in India, and during my travel to Dubai in recent past i bought I phone 5 S. After reaching my country and i started using my new phone and i am surprised to find that it doesnt have facetime. How do i get the same??

rakeshfromkolkata wrote:
How do i get the same??
You get a new phone not made for KSA and UAE markets. There is no way to get FT on your phone as it has been permanently crippled by law.

How to get the command line interface for WRT160NL router

hi,
How can I get the command line interface for WRT160NL router. please suggest.

If you’re trying to access the web-based interface of your router, just use its default IP address (192.168.1.1). The Username is left blank and the Password is "admin". Here’s a quick link on how to do that.

Findsmb not on lion.. how to get the same information

I need the list of samba share on a local network.
how can I get the same result of findsmb command available on snow leopard and not on Lion?
I need these information via command line.
How can I use command like smbutil, nslookup... or what to obtain the list of Netbios name and IP (like findsmb output).
PS: sorry for my english

At this time it is not possible to do what you want. Genius mixes in iTunes are on iOS devices are simply going to be different.

How to get the same colored labels as in the gmail web interface?

Hi,
I would like to get the same preview in Mail.app (with different colored labels) as in Gmail. Currently, my Gmail account in synced with Mail.app, hence I have access to all my mailboxes (hence all my labels). I would like to add a rule which reads as :
if Message is in (gmail label mailbox)
then Set color to (color)
However, this feature doesn't seem to be here. Basically, how to automatically colored a message being in a given mailbox (to get a nice rainbow in my general Inbox).
Thanks in advance!
Damien

I'm pretty sure you can't do that in Mail. If you do find out, post back—I'd like to know too!

How to get the multiple lines on the header part in ALV

HI all,
In my program i am using the ALV- Grid functionality through methods. I have 2 different layouts in the same screen , for this i have 2 containers and i am displaying the title through the gird title now i need to add the few more lines under the title .
Please suggest me, how can i proceede now.
Thanks
Giridhar

Hi,
check this sample code, i did it using splitter container. check it, it is weel documented to know what are required ....
REPORT ZTEST_ALV_TOP    MESSAGE-ID ZZ                           .
DATA: G_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: L_VALID TYPE C,
      V_FLAG,
      V_DATA_CHANGE,
      V_ROW TYPE LVC_S_ROW,
      V_COLUMN TYPE LVC_S_COL,
      V_ROW_NUM TYPE LVC_S_ROID.
DATA: IT_ROW_NO TYPE LVC_T_ROID,
      X_ROW_NO TYPE LVC_S_ROID.
DATA:BEGIN OF ITAB OCCURS 0,
     VBELN LIKE LIKP-VBELN,
     POSNR LIKE LIPS-POSNR,
     CELLCOLOR TYPE LVC_T_SCOL, "required for color
     DROP(10),
     END OF ITAB.
"The Below Definitions Must.....
DATA:
* Reference to document
       DG_DYNDOC_ID       TYPE REF TO CL_DD_DOCUMENT,
* Reference to split container
       DG_SPLITTER          TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
* Reference to grid container
       DG_PARENT_GRID     TYPE REF TO CL_GUI_CONTAINER,
* Reference to html container
       DG_HTML_CNTRL        TYPE REF TO CL_GUI_HTML_VIEWER,
* Reference to html container
       DG_PARENT_HTML     TYPE REF TO CL_GUI_CONTAINER.
"up to here
*       CLASS lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER DEFINITION .
PUBLIC SECTION .
    METHODS:
**Hot spot Handler
    HANDLE_HOTSPOT_CLICK FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                      IMPORTING E_ROW_ID E_COLUMN_ID ES_ROW_NO,
**Double Click Handler
    HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                                     IMPORTING E_ROW E_COLUMN ES_ROW_NO,
    TOP_OF_PAGE FOR EVENT TOP_OF_PAGE              "event handler
                         OF CL_GUI_ALV_GRID
                         IMPORTING E_DYNDOC_ID.
*        END_OF_LIST FOR EVENT end_of_list              "event handler
*                         OF CL_GUI_ALV_GRID
*                         IMPORTING E_DYNDOC_ID.
ENDCLASS.                    "lcl_event_handler DEFINITION
*       CLASS lcl_event_handler IMPLEMENTATION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
*Handle Hotspot Click
METHOD HANDLE_HOTSPOT_CLICK .
    CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
    V_ROW = E_ROW_ID.
    V_COLUMN = E_COLUMN_ID.
    V_ROW_NUM = ES_ROW_NO.
*    MESSAGE I000 WITH V_ROW 'clicked'.
    CLEAR IT_ROW_NO[].
    X_ROW_NO-ROW_ID = V_ROW.
    APPEND X_ROW_NO TO IT_ROW_NO .
    CALL METHOD G_GRID->SET_SELECTED_ROWS
      EXPORTING
        IT_ROW_NO = IT_ROW_NO.
ENDMETHOD.                    "lcl_event_handler
*Handle Double Click
METHOD HANDLE_DOUBLE_CLICK.
    CLEAR: V_ROW,V_COLUMN,V_ROW_NUM.
    V_ROW = E_ROW.
    V_COLUMN = E_COLUMN.
    V_ROW_NUM = ES_ROW_NO.
    IF E_COLUMN = 'VBELN'.
      SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
      CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
    ENDIF.
    IF E_COLUMN = 'POSNR'.
      SET PARAMETER ID 'VL' FIELD ITAB-VBELN.
      CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN."
    ENDIF.
ENDMETHOD.                    "handle_double_click
* METHOD END_OF_LIST.                   "implementation
** Top-of-page event
*    PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
* ENDMETHOD.                            "top_of_page
    METHOD TOP_OF_PAGE.                   "implementation
* Top-of-page event
    PERFORM EVENT_TOP_OF_PAGE USING DG_DYNDOC_ID.
ENDMETHOD.                            "top_of_page
ENDCLASS.                    "LCL_EVENT_HANDLER IMPLEMENTATION
*&             Global Definitions
DATA:      G_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,"Container1
            G_HANDLER TYPE REF TO LCL_EVENT_HANDLER. "handler
DATA: OK_CODE LIKE SY-UCOMM,
      SAVE_OK LIKE SY-UCOMM,
      G_CONTAINER1 TYPE SCRFNAME VALUE 'TEST',
      GS_LAYOUT TYPE LVC_S_LAYO.
data: v_lines type i.
data: v_line(3) type c.
*- Fieldcatalog for First and second Report
DATA: IT_FIELDCAT TYPE LVC_T_FCAT,
      X_FIELDCAT TYPE LVC_S_FCAT,
      LS_VARI TYPE DISVARIANT.
*                START-OF_SELECTION
START-OF-SELECTION.
SELECT VBELN
         POSNR
         FROM LIPS
         UP TO 20 ROWS
         INTO CORRESPONDING FIELDS OF TABLE ITAB.
describe table itab lines v_lines.
END-OF-SELECTION.
IF NOT ITAB[] IS INITIAL.
    CALL SCREEN 100.
ELSE.
    MESSAGE I002 WITH 'NO DATA FOR THE SELECTION'(004).
ENDIF.
*&      Form CREATE_AND_INIT_ALV
*       text
FORM CREATE_AND_INIT_ALV .
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
"attention.....from here
"split your container here...into two parts
"create the container
CREATE OBJECT G_CUSTOM_CONTAINER
           EXPORTING CONTAINER_NAME = G_CONTAINER1.
"this is for top of page
* Create TOP-Document
CREATE OBJECT DG_DYNDOC_ID
                   EXPORTING STYLE = 'ALV_GRID'.
* Create Splitter for custom_container
CREATE OBJECT DG_SPLITTER
             EXPORTING PARENT = G_CUSTOM_CONTAINER
                       ROWS    = 2
                       COLUMNS = 1.
* Split the custom_container to two containers and move the reference
* to receiving containers g_parent_html and g_parent_grid
"i am allocating the space for grid and top of page
CALL METHOD DG_SPLITTER->GET_CONTAINER
    EXPORTING
      ROW       = 1
      COLUMN    = 1
    RECEIVING
      CONTAINER = DG_PARENT_HTML.
CALL METHOD DG_SPLITTER->GET_CONTAINER
    EXPORTING
      ROW       = 2
      COLUMN    = 1
    RECEIVING
      CONTAINER = DG_PARENT_GRID.
* CALL METHOD DG_SPLITTER->GET_CONTAINER
*    EXPORTING
*      ROW       = 2
*      COLUMN    = 1
*    RECEIVING
*      CONTAINER = DG_PARENT_HTML.
* CALL METHOD DG_SPLITTER->GET_CONTAINER
*    EXPORTING
*      ROW       = 1
*      COLUMN    = 1
*    RECEIVING
*      CONTAINER = DG_PARENT_GRID.
"you can set the height of it
* Set height for g_parent_html
CALL METHOD DG_SPLITTER->SET_ROW_HEIGHT
    EXPORTING
      ID     = 1
      HEIGHT = 5.
"from here as usual..you need to specify parent as splitter part
"which we alloted for grid
CREATE OBJECT G_GRID
         EXPORTING I_PARENT = DG_PARENT_GRID.
* Set a titlebar for the grid control
CLEAR GS_LAYOUT.
GS_LAYOUT-GRID_TITLE = TEXT-003.
GS_LAYOUT-ZEBRA = SPACE.
GS_LAYOUT-CWIDTH_OPT = 'X'.
GS_LAYOUT-NO_ROWMARK = 'X'.
GS_LAYOUT-CTAB_FNAME = 'CELLCOLOR'.
CALL METHOD G_GRID->REGISTER_EDIT_EVENT
    EXPORTING
      I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_ENTER.
CREATE OBJECT G_HANDLER.
SET HANDLER G_HANDLER->HANDLE_DOUBLE_CLICK FOR G_GRID.
SET HANDLER G_HANDLER->HANDLE_HOTSPOT_CLICK FOR G_GRID.
* SET HANDLER G_HANDLER->END_OF_LIST FOR G_GRID.
SET HANDLER G_HANDLER->TOP_OF_PAGE FOR G_GRID.
DATA: LS_CELLCOLOR TYPE LVC_S_SCOL. "required for color
DATA: L_INDEX TYPE SY-TABIX.
"Here i am changing the color of line 1,5,10...
"so you can change the color of font conditionally
LOOP AT ITAB.
    L_INDEX = SY-TABIX.
    IF L_INDEX = 1 OR L_INDEX = 5 OR L_INDEX = 10.
      LS_CELLCOLOR-FNAME = 'VBELN'.
      LS_CELLCOLOR-COLOR-COL = '6'.
      LS_CELLCOLOR-COLOR-INT = '0'.
      LS_CELLCOLOR-COLOR-INV = '1'.
      APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
      MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
      LS_CELLCOLOR-FNAME = 'POSNR'.
      LS_CELLCOLOR-COLOR-COL = '6'.
      LS_CELLCOLOR-COLOR-INT = '0'.
      LS_CELLCOLOR-COLOR-INV = '1'.
      APPEND LS_CELLCOLOR TO ITAB-CELLCOLOR.
      MODIFY ITAB INDEX L_INDEX TRANSPORTING CELLCOLOR.
    ENDIF.
ENDLOOP.
* setting focus for created grid control
CALL METHOD CL_GUI_CONTROL=>SET_FOCUS
    EXPORTING
      CONTROL = G_GRID.
* Build fieldcat and set editable for date and reason code
* edit enabled. Assign a handle for the dropdown listbox.
PERFORM BUILD_FIELDCAT.
PERFORM SET_DRDN_TABLE.
* Optionally restrict generic functions to 'change only'.
*   (The user shall not be able to add new lines).
PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
**Vaiant to save the layout
LS_VARI-REPORT      = SY-REPID.
LS_VARI-HANDLE      = SPACE.
LS_VARI-LOG_GROUP   = SPACE.
LS_VARI-USERNAME    = SPACE.
LS_VARI-VARIANT     = SPACE.
LS_VARI-TEXT        = SPACE.
LS_VARI-DEPENDVARS = SPACE.
**Calling the Method for ALV output
CALL METHOD G_GRID->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      IT_TOOLBAR_EXCLUDING = LT_EXCLUDE
      IS_VARIANT           = LS_VARI
      IS_LAYOUT            = GS_LAYOUT
      I_SAVE               = 'A'
    CHANGING
      IT_FIELDCATALOG      = IT_FIELDCAT
      IT_OUTTAB            = ITAB[].
"do these..{
* Initializing document
CALL METHOD DG_DYNDOC_ID->INITIALIZE_DOCUMENT.
* Processing events
CALL METHOD G_GRID->LIST_PROCESSING_EVENTS
    EXPORTING
      I_EVENT_NAME = 'TOP_OF_PAGE'
      I_DYNDOC_ID = DG_DYNDOC_ID.
"end }
* Set editable cells to ready for input initially
CALL METHOD G_GRID->SET_READY_FOR_INPUT
    EXPORTING
      I_READY_FOR_INPUT = 1.
ENDFORM.                               "CREATE_AND_INIT_ALV
*&      Form EXCLUDE_TB_FUNCTIONS
*       text
*      -->PT_EXCLUDE text
FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
* Only allow to change data not to create new entries (exclude
* generic functions).
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
ENDFORM.                               " EXCLUDE_TB_FUNCTIONS
*&      Form build_fieldcat
*       Fieldcatalog
FORM BUILD_FIELDCAT .
DATA: L_POS TYPE I.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Delivery'(024).
X_FIELDCAT-FIELDNAME = 'VBELN'.
X_FIELDCAT-TABNAME = 'IT_FINAL'.
X_FIELDCAT-COL_POS    = L_POS.
X_FIELDCAT-NO_ZERO    = 'X'.
X_FIELDCAT-OUTPUTLEN = '10'.
X_FIELDCAT-HOTSPOT = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Item'(025).
X_FIELDCAT-FIELDNAME = 'POSNR'.
X_FIELDCAT-TABNAME = 'IT_FINAL'.
X_FIELDCAT-COL_POS    = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
L_POS = L_POS + 1.
X_FIELDCAT-SCRTEXT_M = 'Drop'(025).
X_FIELDCAT-FIELDNAME = 'DROP'.
X_FIELDCAT-TABNAME = 'IT_FINAL'.
X_FIELDCAT-COL_POS    = L_POS.
X_FIELDCAT-OUTPUTLEN = '5'.
X_FIELDCAT-EDIT = 'X'.
X_FIELDCAT-DRDN_HNDL = '1'.
X_FIELDCAT-DRDN_ALIAS = 'X'.
APPEND X_FIELDCAT TO IT_FIELDCAT.
CLEAR X_FIELDCAT.
ENDFORM.                    " build_fieldcat
*&      Module STATUS_0100 OUTPUT
*       text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'MAIN100'.
SET TITLEBAR 'MAIN100'.
IF G_CUSTOM_CONTAINER IS INITIAL.
**Initializing the grid and calling the fm to Display the O/P
    PERFORM CREATE_AND_INIT_ALV.
ENDIF.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
    WHEN 'BACK'.
      LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form SET_DRDN_TABLE
*       text
FORM SET_DRDN_TABLE.
DATA:LT_DRAL TYPE LVC_T_DRAL,
        LS_DRAL TYPE LVC_S_DRAL.
LOOP AT ITAB .
* First listbox (handle '1').
    IF SY-INDEX = 1.
      LS_DRAL-HANDLE = '1'.
      LS_DRAL-VALUE = ' '.
      LS_DRAL-INT_VALUE = ' '.
    ELSE.
      LS_DRAL-HANDLE = '1'.
      LS_DRAL-VALUE = ITAB-POSNR.
      LS_DRAL-INT_VALUE = ITAB-POSNR.
    ENDIF.
    APPEND LS_DRAL TO LT_DRAL.
ENDLOOP.
**Setting the Drop down table for Reason Code
CALL METHOD G_GRID->SET_DROP_DOWN_TABLE
    EXPORTING
      IT_DROP_DOWN_ALIAS = LT_DRAL.
ENDFORM.                               " set_drdn_table
*&      Form EVENT_TOP_OF_PAGE
*       text
*      -->DG_DYNDOC_ID text
FORM EVENT_TOP_OF_PAGE USING   DG_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT.
"this is more clear.....check it
"first add text, then pass it to comentry write fm
DATA : DL_TEXT(255) TYPE C. "Text
* Populating header to top-of-page
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
    EXPORTING
      TEXT      = 'Test Report'
      SAP_STYLE = CL_DD_AREA=>HEADING.
* Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
* Move program ID
CONCATENATE 'Program Name :' SY-REPID
         INTO DL_TEXT SEPARATED BY SPACE.
* Add Program Name to Document
PERFORM ADD_TEXT USING DL_TEXT.
* Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
* Move User ID
CONCATENATE 'User ID :' SY-UNAME INTO DL_TEXT SEPARATED BY SPACE
* Add User ID to Document
PERFORM ADD_TEXT USING DL_TEXT.
* Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
* Move count (no of records).
move v_lines to v_line.
CONCATENATE 'No of records :' v_line INTO DL_TEXT SEPARATED BY SPACE.
* Add Client to Document
PERFORM ADD_TEXT USING DL_TEXT.
* Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
* Move date
WRITE SY-DATUM TO DL_TEXT.
CONCATENATE 'Date :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
* Add Date to Document
PERFORM ADD_TEXT USING DL_TEXT.
* Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
CLEAR : DL_TEXT.
* Move time
WRITE SY-UZEIT TO DL_TEXT.
CONCATENATE 'Time :' DL_TEXT INTO DL_TEXT SEPARATED BY SPACE.
* Add Time to Document
PERFORM ADD_TEXT USING DL_TEXT.
* Add new-line
CALL METHOD DG_DYNDOC_ID->NEW_LINE.
* Populating data to html control
PERFORM HTML.
ENDFORM.                    " EVENT_TOP_OF_PAGE
*&      Form ADD_TEXT
*       To add Text
FORM ADD_TEXT USING P_TEXT TYPE SDYDO_TEXT_ELEMENT.
* Adding text
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
    EXPORTING
      TEXT         = P_TEXT
      SAP_EMPHASIS = CL_DD_AREA=>HEADING.
ENDFORM.                    " ADD_TEXT
*&      Form HTML
*       text
FORM HTML.
DATA : DL_LENGTH TYPE I,                           " Length
         DL_BACKGROUND_ID TYPE SDYDO_KEY VALUE SPACE. " Background_id
* Creating html control
IF DG_HTML_CNTRL IS INITIAL.
    CREATE OBJECT DG_HTML_CNTRL
         EXPORTING
              PARENT    = DG_PARENT_HTML.
ENDIF.
* Reuse_alv_grid_commentary_set
CALL FUNCTION 'REUSE_ALV_GRID_COMMENTARY_SET'
    EXPORTING
      DOCUMENT = DG_DYNDOC_ID
      BOTTOM   = SPACE
    IMPORTING
      LENGTH   = DL_LENGTH.
* Get TOP->HTML_TABLE ready
CALL METHOD DG_DYNDOC_ID->MERGE_DOCUMENT.
* Set wallpaper
CALL METHOD DG_DYNDOC_ID->SET_DOCUMENT_BACKGROUND
    EXPORTING
      PICTURE_ID = DL_BACKGROUND_ID.
* Connect TOP document to HTML-Control
DG_DYNDOC_ID->HTML_CONTROL = DG_HTML_CNTRL.
* Display TOP document
CALL METHOD DG_DYNDOC_ID->DISPLAY_DOCUMENT
    EXPORTING
      REUSE_CONTROL      = 'X'
      PARENT             = DG_PARENT_HTML
    EXCEPTIONS
      HTML_DISPLAY_ERROR = 1.
IF SY-SUBRC NE 0.
    MESSAGE I999 WITH 'Error in displaying top-of-page'(036).
ENDIF.
ENDFORM.                    " HTML
Regards
vijay

How to get the changed lines in POWL

Hi Experts,
I need your help on POWL. In the project I have set some fields as input field and they are editable. But I cannot get the lines which i have changed, and the method handl_action wasn't triggered after i pressing 'Enter' key. How can I solve it?
Since in WD ALV we can trigger the event data_check when user press 'Enter' after changing data. I think it also can be done in POWL.
Thank you very much!
Julia

Hi, anyone can help me? thank you very much!

How to get the same email for Eprint after resetting the printer

Hi.
I Have reset my HP Photosmart 7520 printer, but now i can't the the same email adress for Eprint as before the reset, when i try to register the same email adress, i got the message "adress used"..
So how do i get the "old" email adress on the printer again?
Lars

Hi Lars, Please check this link: http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Can-t-use-my-old-hp-... this thread implies the same answer for your question.

How to get the same period last year value using Fiscal Calendar?

Hi there,
I am using DAX in a Tabular Model project but I am getting stuck trying to get the following:
We are using a Fiscal Calendar (from 01 April to 31 March).
Previous Period Value
Value
2012
April
15
May
10
Jun
20
2013
April
15
30
May
10
20
Jun
20
25
I have tried to use sameperiodlastyear but there is an error saying that this function cannot be used for non contiguous dates. DATEADD is given the same error...
Could anyone help me getting the right measure expressions for [Previous Period Value]?
Thanks and best regards,
Joss

Hi Joss,
In SQL Server Analysis Services, we can can compare revenue with the hierarchy periods (year, month, day) by using the PARALLELPERIOD function, and now you want to compare with custom periods. (NOTE: We cannot compare it with the PARALLELPERIOD function
since
PARALLELPERIOD function returns a member from a prior period in the same relative position as a specified member. So if the first time span not equal to the second one (such as the first period is 3 days, and the second period is 2 month)). Here
is a sample query about PARALLELPERIOD function for your reference.
with
set Hotels as
[Hotels].[Hotel ID].&[1015],
[Hotels].[Hotel ID].&[5640],
[Hotels].[Hotel ID].&[8800]
set Period as [Arrival Date].[Date].[Month].&[2012]&[1]:[Arrival Date].[Date].[Month].&[2012]&[12]
member [Arrival Date].[Date].[0] as sum({ Period })
member [Total Amount N-1] as (PARALLELPERIOD([Arrival Date].[Date].[Year], 1, [Arrival Date].[Date].[Year].&[2012]), [Measures].[Total Amount])
select
[Measures].[Total Amount],
[Measures].[Total Amount N-1]
} on 0,
nonemptycrossjoin
Hotels,
Hotels.[Hotel].children,
*{[Arrival Date].[Date].[0]}
} on 1
from [Booking_Cube]
Regards,
Charlie Liao
TechNet Community Support

How to get the values and attributes of Longlived processes by using ProcessID.

Hi Experts,
For every process we creates, LC ES2 creates processID.
we know that if you creates a long lived process, all the values which are in proces will be stored some where in DB.
Here my requirement is by using processID I need to get all/some values/variables stored in database.
I am not able to get values using processID. Here I don't have clue on how to get the values.
Please tell me how to get the same by using Process Management. Link/guide would be helpful
Thanks
Praveen.

Searchable means you can put a filter criteria on it (e.g. where amount > 50000)
Visible means you can add have this column returned as an output (and therefore you can add it as column in listview and see it in Task Details).
These two attributes were provided so that queries could be done against the process variables, but the exact contents of the variables are not allowed to be seen.

V v urgent ... how to get the selected rows in the vl02n transaction

Hi ,
I have requirement that i have selected the line items in the vl02n transaction.
If I select only one row there is option gs_get_cursor-line.
If I select more than one line item at a time I am getting only the last value in to gs_get_cursor-line.
Can anybody let me know how to get the multiple line items that are selected
It is very urgent ..
Plz Help

Hi,
can you check the E_row_id .
v_row type LVC_S_ROW
read table itab index E_ROW-index.
regards,
Ajay
Edited by: Ajay on Feb 14, 2008 6:22 PM

How to get the disk size

Hi, everyone, does anyone know how to get the size of the disk, say hard disk? In the Writing Device Driver it says that the block device driver must create an 'nblocks' property for each minor block device. I want to get the size of the block device in another driver. Is there any DDI/DKI kernel function for this?
How to get the same thing in a user mode application? Is there any API to do this?
Thank you very much.

I just found a function in include/sys/conf.h. The prototype is:
extern int bdev_size(dev_t);
Can I use this function to get the disk size of the device dev_t? I couldn't find the documentation of this function.
Thanks

Unable to get the same font in swf file

Hi,
I've created some swf files in which text was written using one particular font. When I run these swf files in other computers which don't have this font, The text gets displayed in different font.
How to get the same font in other computers also without installing the font.
I tried embedding font in fla file. But I commit mistake at somewhere. Could anyone help me to figure it out ?
Thanks !

Hi,
Thanks for your assistance.
I apologize for not explaining it properly. As you had suggested I just created one new file in which I kept only one text field. No actionscript or anything. The text will be displayed on the stage for 2 secs.
As it is static I don't need to embed the text. So I didn't. Checked the swf file in different computers but no desired display. I then embedded the font. No desired display again in different computers. I then changed it from static to dynamic text, It is not necessary though. Still no desired display. I then tried with different font. But same thing happens.
How did I embed the font ?
Text --> Font Embedding --> Choosing correct font family and style --> Choosing character ranges as uppercase, lowercase, numbers, punctuation. Then clicked on + sign available at right top corner of the left area in which all embedded fonts are displayed. Click OK. Checked in Library and those fonts are available.
I even didn't do anything with actionscript tab as I don't have any actionscript at all for this file.
2 fonts I used:
Font Family: Cooper Std
Style: Black
Font Family: DigifaceWide
Style: Regular
I don't really know Where I commit mistake. Please advice me.
Awaiting your precious reply.
Thanks.

How to get the Hardcoded text and the Standard text in the same line

Similar Messages

Maybe you are looking for