How to get the header text of a PO

Hi,
Do you guys know which table stores the header text of a PO? i'm only getting RM06E which is a structure.
Thanks!

Hi,
You need to use the Function Module 'READ_TEXT' for retrieving any text in the header texts.
For this FM, the mandatory export parameters will be
a) client b) ID c) language d) name e) object
here the parameter name will be your P.O.No and the object will be your P.O. table - 'EKKO'.
So on executing this FM, all the required texts are retrieved in the tables parameters. From this tables paramater, you can read the table and pass on the values to your required internal table for display purpose.
lakshminarayanan
Please mark all helpful answers for points.

Similar Messages

  • How to get the short text in tcode "msc3n" -- Basic data 2 -- short text.

    I have to display the short text in my report output.
    How to get the short text in tcode "msc3n" ( msc3n --> Basic data 2 --> short text.)?
    Is there any function module availble to get this short text or is this stored in any data base table ?
    Please help me. Your help will be highly appreaciated.
    THANKS.

    Hi,
    Use FM 'READ_TEXT' to get this values.
    Say for exampele my material is  1900001 and batch is 0000000517.
    Then my parameters to the FM will be as follows:-
    Text Name       000000000001900001    0000000517
    Language        EN
    Text ID          VERM
    Text Object     CHARGE
    This information you can get as follows.
    Open the short text window in the text editor.
    Here you can enter the long text.
    In the editor Go to Header and you will find the details.
    Please note that the text name will comprise of
    Material
    Batch
    Plant
    Stor. Location
    if all the details are given.
    I hope this helps you.
    Regards,
    Ankur Parab

  • How to retrieve the header texts for a contract

    HI,
      i think we need to use the FM read_text to get the header texts for a contract but dont know how to use the FM like what all the parameters are passed to that to get the header texts of a contract(va43).
    any help is appreciated with points.
    thanks
    prasad

    Hi,
      Pls refer this code,    
        CALL FUNCTION 'READ_TEXT'
                  EXPORTING
                    client                  = sy-mandt
                    id                      = '0001'
                    language                = sy-langu
                    name                    = v_textid
                    object                  = 'KNMT'
                  IMPORTING
                    header                  = t_header
                  TABLES
                    lines                   = t_lines
                  EXCEPTIONS
                    id                      = 1
                    language                = 2
                    name                    = 3
                    not_found               = 4
                    object                  = 5
                    reference_check         = 6
                    wrong_access_to_archive = 7
                    OTHERS                  = 8.
                IF sy-subrc EQ 0.
                  LOOP AT t_lines.
                    CONCATENATE w_arktx t_lines-tdline INTO w_arktx
                                       SEPARATED BY space.
                  ENDLOOP.
                ENDIF.
                IF w_arktx NE space.
                  MOVE w_arktx+1(1583) TO t_lips-arktx.
                ELSEIF w_arktx EQ space.
                  CLEAR w_text_name.
                  CLEAR v_textid.
                  wa_lips-matnr = t_lips-matnr.
                  wa_lips-vkorg = t_likp-vkorg.
                  wa_lips-vtweg = t_lips-vtweg.
                  w_text_name = wa_lips.
                  CLEAR w_arktx.
    Retrieval of Sales Text
                  CALL FUNCTION 'READ_TEXT'
                    EXPORTING
                      client                  = sy-mandt
                      id                      = '0001'
                      language                = sy-langu
                      name                    = w_text_name
                      object                  = 'MVKE'
                    IMPORTING
                      header                  = t_header
                    TABLES
                      lines                   = t_lines
                    EXCEPTIONS
                      id                      = 1
                      language                = 2
                      name                    = 3
                      not_found               = 4
                      object                  = 5
                      reference_check         = 6
                      wrong_access_to_archive = 7
                      OTHERS                  = 8.
                  IF sy-subrc EQ 0.
                    LOOP AT t_lines.
                      CONCATENATE w_arktx t_lines-tdline INTO w_arktx
                                         SEPARATED BY space.
                    ENDLOOP.
                  ENDIF.
                  IF w_arktx NE space.
                    MOVE w_arktx+1(1583) TO t_lips-arktx.
                  ELSE.
    REgards
    srinivas

  • How to get the bold texts in JTextPane?

    How to get the bold texts in JTextPane?

    I believe you need to look at the Elements of the Document. Use the Document.getDefaultRootElement() method to get the first root Element. From there you can iterate through all the Elements. You should then be able to check the attributes of the element to see if it contains the Bold attribute using something like:
    AttributeSet attributes = element.getAttributes();
    if ( attributes.containsAttribute(StyleConstants.Bold, Boolean.TRUE)
    // do processing here

  • Table in which if I put the delivery number ..I should get the HEADER TEXT

    Dear Members,
    I am checking for a table in which if I put the delivery number ..I should get the HEADER TEXT. Does such table exists or a Z report shoudl be created for this kind of setup.
    Regards,

    Hi,
    There are two Tables in which the texts will be stored
    One is STXH -
    TEXT HEADER
    other   STXL------- TEXT ITEM
    If you want to get the Header text then input the values in the table
    In STXH
    TEXT OBJECT     is    VBBK
    TEXT NAME      is      DELIVERY NUMBER
    TEXT ID             is       ZS01  ( this is the standard ID for the  Header note 1 )
    Now goto SE37 and give the Function Module READ_TEXT and maintain all the above details and get the TDLINE Which contains the TEXT of the Delivery
    regards,
    santosh

  • How to wrap the heading text in alv.

    HI all,
          I need help, how to wrap the heading text in alv.
    can any help ... plz..
    Advanced Thanks
    Regards
    GUhapriyan

    Hello GuhaPriyan,
    I assume that you're referring to the ALV Grid's title. The maximum length for this title is 70 characters and this would generally fit in the one line.
    Are you intending to wrap it because you purposefully want the text to come in two lines? In that case, I'm not sure that it's possible.
    But otherwise, there's an option in the Layout called SMALLTITLE. You can set this attribute so that the title would be displayed in a amaller font and hopefully, all of your text shows up on the screen.
    Regards,
    Anand Mandalika.

  • How to get the header to downloading fine

    Hi,
    i am downloading xl file for which i need to get the header.i doesnt no the fieldnames.how to get the header for entire file.

    Hi,
    For this please create an internal table for field names and pass it to FM' WS_DOWNLOAD'.
    Sample code:
    * internal table for headers
    DATA : BEGIN OF it_fieldnames OCCURS 0,
           name(100),
           END OF it_fieldnames.
    g_fname = 'C:\Documents and Settings\kut3kor\Desktop\kar4.xls'.
    *populate the internal table
    it_fieldnames-name = 'Material Number'.
    APPEND it_fieldnames.
    it_fieldnames-name = 'Material type'.
    APPEND it_fieldnames.
    it_fieldnames-name = 'Material group'.
    APPEND it_fieldnames.
    CALL FUNCTION 'WS_DOWNLOAD'
    EXPORTING
    *   BIN_FILESIZE                  = ' '
    *   CODEPAGE                      = ' '
       FILENAME                      = g_fname
       FILETYPE                      = 'DAT'
    *   MODE                          = ' '
    *   WK1_N_FORMAT                  = ' '
    *   WK1_N_SIZE                    = ' '
    *   WK1_T_FORMAT                  = ' '
    *   WK1_T_SIZE                    = ' '
    *   COL_SELECT                    = ' '
    *   COL_SELECTMASK                = ' '
    *   NO_AUTH_CHECK                 = ' '
    * IMPORTING
    *   FILELENGTH                    =
      TABLES
        data_tab                      = gt_mara[]
       FIELDNAMES                    = it_fieldnames[]
    * EXCEPTIONS
    *   FILE_OPEN_ERROR               = 1
    *   FILE_WRITE_ERROR              = 2
    *   INVALID_FILESIZE              = 3
    *   INVALID_TYPE                  = 4
    *   NO_BATCH                      = 5
    *   UNKNOWN_ERROR                 = 6
    *   INVALID_TABLE_WIDTH           = 7
    *   GUI_REFUSE_FILETRANSFER       = 8
    *   CUSTOMER_ERROR                = 9
    *   OTHERS                        = 10
    IF sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards,
    Karuna.

  • How to get PO header text in PO list

    Hi All,
    Please let me know how to get PO header text in PO list.
    Thanks,
    Ama

    Check this link for answer
    PO Header Text

  • How to get the Arabic text to speech on N8 ?

    How to get the Arabic text to speech on N8 ?

    Unfortunately it is not currently an available option:http://www.nokia.com/global/support/text-to-speech-s60-32-downloads/
    Happy to have helped forum with a Support Ratio = 42.5

  • How to get the Underlined text in JTextPane

    I have a JtextPane with text say "i _like java_ it is a _good language_".
    in the above text i have made "like java" and "good language" underlined. And i have added a mouse listener to this JTextpane. the whole idea is to create a hyperlink so that when the user clicks anywhere on "like java" then i want to get the complete text("like java") where i clicked and using this text i want to do some operation. How can i get the underlined text?
    thanks.

    it was the same i question what i had posted. i didn't get reply there so i posted the same question in a new topic.

  • How to get the highlighted text range through Framemaker's API calls?

    Hi all,
    I'm new to the Framemaker API (7.x) and developing a plugin for Framemaker 7.x. I wanted to get the highlighted objects from the active mif document. Tried this code:
    F_TextRangeT tr;
    /* Get the current text selection. */
    tr = F_ApiGetTextRange(FV_SessionId, docId, FP_TextSelection);
    Here is how I tested it:
    1. some text in the mif doc was highlighted.
    2. I clicked the menu item "my_plugin", a framemaker dialog popped up, some test configuration was sent through the dialog.
    3. The test configuration was read by my program correctly.
    However, the debugger showed that the tr is null! When I changed the first step of the test into:
    1. placed the mouse cursor at somewhere in the mif doc.
    The plugin worked somehow, the line where the mouse cursor was placed got selected, although I did not highlight anything.
    My question is: how to get a highlighted range though the Framemaker API call? I've been flipping through the FDK 7.0 Programmer's Reference but haven't found a solution yet. Any hint will be highly appreciated.
    Best Regards,
    Ellen N. Zhao

    Here is some information from the FDK Programmer's guide page 115:
    IMPORTANT: A valid text range can span multiple paragraphs, subcolumns, or text frames.
    It cant span multiple flows, footnotes, table cells, or text lines.
    It is possible for a document to have no text selection or insertion point at all. This can occur in
    the following circumstances:
    ● One or more graphic objects in the document are selected
    ● One or more entire table cells in the document are selected
    ● There is no selection of any type in the document
    So, I did select one or more entire table cells in the document in my first test. It's logical that the result was not like expected.
    But selecting one or more entire table cells is a crucial requirement for my plugin, is there anyway to get things straight?
    Simply put, I want to enable users to select one or more table cells in the document, and I want to get the object handles of the first cell and the last cell through Framemaker API calls. How?
    Many thanks in advance!
    Best Regards,
    Ellen N. Zhao

  • How to get the Sales Text?

    Hi,
    I need a Function which will help me to read the Sales Text found in the MM03. I am using the following function but it seems I am not getting the NAME right. In the table STXL when I checked the NAME contains the MATERIAL(X7000114BLCK), SALES Org(1000) and Distribution Channel(20) like this "X7000114BLCK      100020". How could I make up this? or is there another easy Function where I could give the Sales Order No, Material or Line Item to get the Sales Text which comes in MM03.
    The Funtion that I used;
    call function 'READ_TEXT_INLINE'
             exporting
                  id              = '0001'
                  inline_count    = 1
                  language        = 'E'
                  NAME            = PO_OBJ
                  object          = 'MVKE'
             tables
                  inlines         = inlines
                  lines           = lines
             exceptions
                  id              = 1
                  language        = 2
                  name            = 3
                  not_found       = 4
                  object          = 5
                  reference_check = 6
                  others          = 7.
    Thanks,
    Kishan

    Hi Hymavathi,
    I did like this;
    DATA v_tmp(18) TYPE c.
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
         EXPORTING
             input  = wa_sales-matnr
         IMPORTING
             output = v_tmp.
    CONCATENATE v_tmp 'XXX' INTO PO_OBJ.
    The answer that I get is this - "X7000114BLCKXXX" the spaces beteeen the MATNR and XXX is not there. How could I get this?
    Thanks,
    Kishan

  • How to get column header text in IWDTable

    Hi
    Just want to know how to get column header name in IWDTable.
    I know that you can get it with
    IWDAbstractTableColumn[] groupedColumns = table.getGroupedColumns();
    for (int i = 0; i < groupedColumns.length; i++) {
         IWDAbstractTableColumn column = groupedColumns<i>;
         column.getHeader().getText();
    But what if text isnt set on header level but its rendered from cellEditor  model binding (im not sure if its like that).

    Finally after your suggestion i did it with this code
    String header = column.getHeader().getText();
                       if ((header == null || header.length() == 0) && column instanceof IWDTableColumn){
                            IWDTableCellEditor tableCellEditor = ((IWDTableColumn) column).getTableCellEditor();
                            if (tableCellEditor instanceof IWDTextView){
                                 String bindingPath = ((IWDTextView)tableCellEditor).bindingOfText();
                                  StringTokenizer tokenizer = new StringTokenizer(bindingPath,".");
                                  String token = "";
                                  IWDNodeInfo nodeInfo = context.getNodeInfo();
                                  while (tokenizer.hasMoreTokens()){
                                       token = tokenizer.nextToken();
                                       if (tokenizer.hasMoreTokens()){
                                            nodeInfo = nodeInfo.getChild(token);          
                                  IWDAttributeInfo attribute = nodeInfo.getAttribute(token);
                                  ISimpleType simpleType = attribute.getSimpleType();
                                  simpleType.getDescription();
                                 header = simpleType.getDescription();

  • How to change the header text on output type in sapscript

    Dear All,
    In the sapscript, I would like to changes the header text from invoice number to sales number on the output type z001.
    Could someone can guide me?
    Thanks.

    Hi,
    Please go through following link :
    http://forums.adobe.com/thread/870081#870081
    Thanks and Regards,
    Vibhuti Gosavi | [email protected] | www.infocepts.com

  • How to get the field texts from abap dictionary into screen Text fields

    Hi SapAll.
    here i have got to modify one zscreen by adding 1 more field,when i added one field in teh screen by just writng the code in program as SELECT-OPTIONS ilart FOR CAUFVD-ILART.
    but iam unable to get the field text for the text field from teh table CAUFVD.
    CAN ANY BODY HELP ME IN THIS.
    regards.
    varma

    Hi Varma,
    Even if you want to personalise the Text also you can do without checking the DICTREF checkbox. Dirctly you can give the text in the Text elements by using the Menu GOTO -> Text Elemetns -> Selection Texts.
    Regards
    Thiru

Maybe you are looking for