How to get the Sales Text?

Hi,
I need a Function which will help me to read the Sales Text found in the MM03. I am using the following function but it seems I am not getting the NAME right. In the table STXL when I checked the NAME contains the MATERIAL(X7000114BLCK), SALES Org(1000) and Distribution Channel(20) like this "X7000114BLCK      100020". How could I make up this? or is there another easy Function where I could give the Sales Order No, Material or Line Item to get the Sales Text which comes in MM03.
The Funtion that I used;
call function 'READ_TEXT_INLINE'
         exporting
              id              = '0001'
              inline_count    = 1
              language        = 'E'
              NAME            = PO_OBJ
              object          = 'MVKE'
         tables
              inlines         = inlines
              lines           = lines
         exceptions
              id              = 1
              language        = 2
              name            = 3
              not_found       = 4
              object          = 5
              reference_check = 6
              others          = 7.
Thanks,
Kishan

Hi Hymavathi,
I did like this;
DATA v_tmp(18) TYPE c.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
     EXPORTING
         input = wa_sales-matnr
     IMPORTING
         output = v_tmp.
CONCATENATE v_tmp 'XXX' INTO PO_OBJ.
The answer that I get is this - "X7000114BLCKXXX" the spaces beteeen the MATNR and XXX is not there. How could I get this?
Thanks,
Kishan

Similar Messages

How to get the short text in tcode "msc3n" -- Basic data 2 -- short text.

I have to display the short text in my report output.
How to get the short text in tcode "msc3n" ( msc3n --> Basic data 2 --> short text.)?
Is there any function module availble to get this short text or is this stored in any data base table ?
Please help me. Your help will be highly appreaciated.
THANKS.

Hi,
Use FM 'READ_TEXT' to get this values.
Say for exampele my material is 1900001 and batch is 0000000517.
Then my parameters to the FM will be as follows:-
Text Name       000000000001900001    0000000517
Language        EN
Text ID          VERM
Text Object     CHARGE
This information you can get as follows.
Open the short text window in the text editor.
Here you can enter the long text.
In the editor Go to Header and you will find the details.
Please note that the text name will comprise of
Material
Batch
Plant
Stor. Location
if all the details are given.
I hope this helps you.
Regards,
Ankur Parab

How to get the bold texts in JTextPane?

How to get the bold texts in JTextPane?

I believe you need to look at the Elements of the Document. Use the Document.getDefaultRootElement() method to get the first root Element. From there you can iterate through all the Elements. You should then be able to check the attributes of the element to see if it contains the Bold attribute using something like:
AttributeSet attributes = element.getAttributes();
if ( attributes.containsAttribute(StyleConstants.Bold, Boolean.TRUE)
// do processing here

How to get the Arabic text to speech on N8 ?

How to get the Arabic text to speech on N8 ?

Unfortunately it is not currently an available option:http://www.nokia.com/global/support/text-to-speech-s60-32-downloads/
Happy to have helped forum with a Support Ratio = 42.5

How to update the sales text in the Sales Order.

Dear all,
I want to Update the sales text in the Sales Order. I used the "CREATE_TEXT" but i couldn't update using it.
Can u please guide me, how to use the Function Module to update the sales Order line item text values.
Thank U
Uwanthi

HI
Check this link
User Exit to update Sales order text (Terms of delivery) on saving it
Regards,
Krishna

How to get the Underlined text in JTextPane

I have a JtextPane with text say "i _like java_ it is a _good language_".
in the above text i have made "like java" and "good language" underlined. And i have added a mouse listener to this JTextpane. the whole idea is to create a hyperlink so that when the user clicks anywhere on "like java" then i want to get the complete text("like java") where i clicked and using this text i want to do some operation. How can i get the underlined text?
thanks.

it was the same i question what i had posted. i didn't get reply there so i posted the same question in a new topic.

How to get the highlighted text range through Framemaker's API calls?

Hi all,
I'm new to the Framemaker API (7.x) and developing a plugin for Framemaker 7.x. I wanted to get the highlighted objects from the active mif document. Tried this code:
F_TextRangeT tr;
/* Get the current text selection. */
tr = F_ApiGetTextRange(FV_SessionId, docId, FP_TextSelection);
Here is how I tested it:
1. some text in the mif doc was highlighted.
2. I clicked the menu item "my_plugin", a framemaker dialog popped up, some test configuration was sent through the dialog.
3. The test configuration was read by my program correctly.
However, the debugger showed that the tr is null! When I changed the first step of the test into:
1. placed the mouse cursor at somewhere in the mif doc.
The plugin worked somehow, the line where the mouse cursor was placed got selected, although I did not highlight anything.
My question is: how to get a highlighted range though the Framemaker API call? I've been flipping through the FDK 7.0 Programmer's Reference but haven't found a solution yet. Any hint will be highly appreciated.
Best Regards,
Ellen N. Zhao

Here is some information from the FDK Programmer's guide page 115:
IMPORTANT: A valid text range can span multiple paragraphs, subcolumns, or text frames.
It cant span multiple flows, footnotes, table cells, or text lines.
It is possible for a document to have no text selection or insertion point at all. This can occur in
the following circumstances:
● One or more graphic objects in the document are selected
● One or more entire table cells in the document are selected
● There is no selection of any type in the document
So, I did select one or more entire table cells in the document in my first test. It's logical that the result was not like expected.
But selecting one or more entire table cells is a crucial requirement for my plugin, is there anyway to get things straight?
Simply put, I want to enable users to select one or more table cells in the document, and I want to get the object handles of the first cell and the last cell through Framemaker API calls. How?
Many thanks in advance!
Best Regards,
Ellen N. Zhao

How to get the sales price of sales SET

Hi,
I want to get the sales price of a sales set, is ther any fm bapi our class to doe that?
thanzs in advanced to all
Jaime

Problem Solved

How to get the field texts from abap dictionary into screen Text fields

Hi SapAll.
here i have got to modify one zscreen by adding 1 more field,when i added one field in teh screen by just writng the code in program as SELECT-OPTIONS ilart FOR CAUFVD-ILART.
but iam unable to get the field text for the text field from teh table CAUFVD.
CAN ANY BODY HELP ME IN THIS.
regards.
varma

Hi Varma,
Even if you want to personalise the Text also you can do without checking the DICTREF checkbox. Dirctly you can give the text in the Text elements by using the Menu GOTO -> Text Elemetns -> Selection Texts.
Regards
Thiru

How to get the sales value of the last month in the quarter

Hi,
We have a requirement to get the "Sales" value against a quarter. We have 2 tables "Time" and "Sales". We want to display the Sales value against each quarter.
But this should happen as follows.
Consider quarter Q1 it should display the value of 3rd month, Q2 should display value for 6th month and so on..
If in any particular Quarter we dont have a value for last month then it should display the value for 2nd month, if 2nd month value is also not present then it should display 1st month sales value.
We are using excel as the database.
Please let us know if anybody has a resolution to this.
Regards,
Apoorv Chitre

hi,make an other column which will be the flag for the last months you want to be displayed...
so ,in reports,you pass it as hidden column(by filter only the ones which have the appropriate flag),and then voila...
i hope i helped
http://greekoraclebi.blogspot.com/
///////////////////////////////////////

How to get the relevant text in the Cone Chart(WAD)

Hi Expert's,
Here is a requirement where we are using the CONE chart.
But we are not getting the relevant texts based on the query attached.
Plz help me to get the texts.
Thanks in Advance.
Vasu.

Expert's plz look into it..this is very urgent.

Calling VA01 from Report,how to get the Sales Order No when Back.

Hi all,
I have a requirement of calling va01 from the report and have done that using
did recording ...&
call transaction va01 using bdcdata.
but my problem is when back from that trasaction i have to get the sales order that is created . Is it possible to retrieve that value from va01 .i am unable to get . anyone pls share

Use the addition MESSAGES INTO itab with call transaction va01 using bdcdata.
Effect of MESSAGES INTO itab:
Using this addition, all the messages sent during batch input processing are stored in an internal table itab of the type BDCMSGCOLL from the ABAP Dictionary.
If the call transaction is successful then retrieve the last message from itab and then in any field among MSGV1,MSGV2,MSGV3,MSGV4 of itab u will get the document no.
And when doing the call transaction pl. choose update mode as 'S' or 'L'.
Regards,
Joy.

How to get the standard texts available in a smartforms

Hi Experts,
How can we find out the standard texts that are exist in a particular smartform . is there any table/function module available to get those standard texts? I am finding the table STXFTXT, from that I am getting only textline. But I need the standard text names that are used in a smartform.
Thanks & Regards,
Suresh

hi,
1,Use SO10 Tcode to write standard text in Smartform.
2.For long text
method1
Create TEXT node- general attributes change text type to include text
then you can input text name/text object/text id/language
method2
create PROGRAM LINE node - use FM READ_TEXT to read it to a internal table
then use LOOP or TABLE node to display it
For TEXT module(For foreign language)
Tr-code:smartforms -- choose Text module(not choose form)--create a text module object
then enter smartform Create TEXT node- general attributes change text type to text module
input the text module name which created by above
3.
1. take function module name of the smartform.
2. goto se37 and type that fm name.
3. goto attributes tab
4. double click on either program or include .
5. There u can find all the subroutines used inside smartform.
6. search for "perform %move using %textkey-name".
4.Standard Texts are created in SO10 Tcode and stored in STXH table with OBject ,ID and NAME parameters. We can use Read_Text FM to read the text.
check the tables STXH & STXL.
5.
How to CAll Standard Text in Smart Forms
In SFs you can insert the standard tests using the TEXT node. Create a TEXT NODE. Then in the GENERAL ATTRIBUTES of this TEXT node select INCLUDE TEXT in the TYPE option. Then you have to enter the text name, object , ID and language in the provided fields. Then if you dont want any error if there is no text in the corresponding text then CHECK the check box "No errors if no text available.

How to get the PDF Text position, font, size, align...?

Hi~!
I can extract all the text from the PDF file, but just plain text.
I need their format, position, font, size, align.
I am using C#, IAC, and read the SDK carefully.
How to get them?
Thanks for every hint on how to achieve this!
Jason Wang

"Often this is a rectangle, sometimes not (e.g. for italic text the box
may be slanted too)."
Sometimes it lines up with the horizontal axis, sometimes not.
Aandi Inston
=====================================================
"Remember, in PDF, the origin is BOTTOM LEFT... "
Leonard Rosenthol
=====================================================
Thank you, Aandi, Leonard, Thanks a lot
Jason Wang

How to get the Hardcoded text and the Standard text in the same line

Hi,
I have an SAP Layout. In that, it should show the Consignee name as below.
     Consignee: SAP LABS
In this, the text 'Consignee: ' should be hardcoded in the layout itself. and the customer has requested to create a standard text for 'SAP LABS' sothat if they want to change the value in future, they would go and change the Standard text. I have created the Standard Text for SAP LABS. I am not able to get both these texts on the same line. I wrote in the layout like below and AS is the Paragraph format.
AS     Consignee:
/:        INCLUDE ZVRU_CONSIGNEE OBJECT TEXT ID ST LANGUAGE EN PARAGRAPH 'AS'
But, both are coming in dofferent lines. As /: is a command line, it is coming in the next line. Is there any way of getting these two texts in the same line..? While Inserting the Standard Texts, will there be any option/command to print it in the same line..?
Please share your thoughts. Thanks in advance.
Thanks & Regards,
Paddu.

Hi Paddu,
I have had a similar requirement. I did not use any FM or anything, simply did the following:
In SO10, for your standard text where u have used the text SAP LABS.
Instead of P1/ default para, change it to =. And then Save ur Standrd text.
Now in the SAPScript Text editor in which you want to print
P1 'Consignee :'
/: INCLUDE TEST OBJECT TEXT ID ST LANGUAGE EN
the output will be
Consignee : SAP LABS
I have tried and tested this method. It will surely work.
With regards,
Niharika.

How to get the Sales Text?

Similar Messages

Maybe you are looking for