How to get the information of the framerate and bitrate in receiving side

Hi,
I want to know if anyone here know how to get the frame rate and the bit rate statistic on the receiving side.
I know that it will be displayed on the info panel with the control component, but actually where can I obtain the stats into my program instead of reading by my eye.
Thanks for helping me.
Best regards
Ferdinand

Hi Raju,
It's basu here,
I used TADIR and TRDIR Tables , But There is no modified Information.
Means, Suppose if i modified any customized object , i want that information also in the Report.
Please Help me on this.
Thanks
Basu
Message was edited by:
karibasavakm Kumbargiri Math

Similar Messages

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help :)

On iTunes when i plug my iphone in, the bar at the bottom with contains the information about the capacity of my iphone, it has a bar called 'other' which has 4GB. I don't know what is taking up that space or how to get rid of it. please help

You can reduce the size to normal, which is about 1GB, by restoring the phone.
Backing Up, updating, and restoring your iPhone and iPod touch software
The size of this part can increase when something goes wrong during a sync, or some files can't be read anymore by iTunes.

How to get the information of the log related to t.code generated by basis.

In the log generated by the basis personnel we found the details of user and corresponding t.code used details. How to get the information reg. which document he went into using this t.code? For example me29 t.code used by 'x' user. The log is showing time date t.code and user. By using me29n which document he attended is the requirement. How to get this information. Let me know it pl.
TS

Thanks all for the help.
Here is my solution. A mix from Julian and Thomas.
In future I will encapsulate the code in a function module.
DATA: BEGIN OF usr_tabl OCCURS 10.
        INCLUDE STRUCTURE uinfo.
DATA: END OF usr_tabl.
DATA: th_opcode(1) TYPE x.
DATA: LV_TID LIKE SY-INDEX.
CONSTANTS: opcode_list LIKE th_opcode VALUE 2.
CALL 'ThUsrInfo' ID 'OPCODE' FIELD opcode_list
ID 'TAB' FIELD usr_tabl-sys.
CALL FUNCTION 'TH_USER_INFO'
EXPORTING
    CLIENT = sy-mandt
    USER   = sy-uname
IMPORTING
    TID    = LV_TID.
read table usr_tabl with key tid = lv_tid.
IF sy-subrc = 0.
CASE usr_tabl-type.
    WHEN 2.
      write :/ usr_tabl-type, 'SYSTEM'." (system)
    WHEN 4.
      write :/ usr_tabl-type, 'GUI'." (Gui)
    WHEN 32.
      write :/ usr_tabl-type, 'RFC'."(RFC)
    WHEN 202.
      write :/ usr_tabl-type, 'PLUG-IN'." (Plug-in &).
endcase.
ENDIF.

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?

Well the error message is in Swedish but says: The installation program database is damaged. Please contact the Adobe support (which is a hard thing to do!!). I use Windows 7 Home Premium with service pack 1.
Från: Mylenium
Skickat: den 29 december 2014 16:48
Till: Tony Bohman
Ämne: I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
I have tried to reinstall CS3 extended student version to my new comuter from the dvd and also from the web download but it does not work - I get the information that the server does not work- why. How should I do?
created by Mylenium <https://forums.adobe.com/people/Mylenium> in Downloading, Installing, Setting Up - View the full discussion <https://forums.adobe.com/message/7050595#7050595>

HT201328 My nephew give me the iphone and i'm not sure about the carrier. how i can get this information using the imei number?

My nephew give me the iphone and i'm not sure about the carrier. how i can get this information using the imei number?

If you have the iPhone in front of you, here's how you can learn the carrier:
Go to Settings > General > About and look at the "Network" row near the top. There's your carrier's name!

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

I just purchased a few songs from Itunes and could not edit the information in the Get Info section of the file. It's greyed out. Any ideas? Has ITunes changed and no longer allows editing.

Has ITunes changed its editing feature for songs, etc.? I just purchased a few songs and found that I could not edit them using the "Get Info" feature. The information is greyed out and does not allow editing. Among other things, I usually like to eliminate the word "THE" from group names for easier alphabetizing in my library. Thanks for any help.

Check permissions and ownership of the files. Maybe this helps....
How to Take Ownership and Grant Permissions in Windows Vista

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

I want to get the information of the attachment without get the whole body

POP3 server:
MimeMultipart mp=(MimeMultipart) message[0].getContent();
int count=mp.getCount();
//the server deliver the whole attachment when I use mp.getCount
Part part=mp.getBodyPart(0);
//when I use getBodyPart the server deliver the whole body too
I just want to get the information of the BodyPart,just like filename.
Some say FetchProfile can do it.But I try it failed.
How could I do this? Thank you!

Using POP3, you can't. It's a limitation of the protocol.

I downloaded lion but lost the setup assistant. please help me recover the setup assistance. i do not know where/how to find/enter information in the terminal.

i downloaded lion but lost the setup assistant. please help me recover the setup assistant. i do not know where/how to find/enter information in the terminal as was suggested.

Launch the Terminal application; e.g., by entering the first few letters of its name in a Spotlight search. Copy or drag -- do not type -- the line below into the Terminal window, then press return:
sudo rm /var/db/.AppleSetupDone
You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. Confirm.
Reboot. The Setup Assistant will launch.

HOW points get you privileges within the community

1. Create an account.
2. Receive welcome email: "Welcome to Apple Support Communities! ... "Participate: Check out the community by reading existing discussions and see what the latest buzz is about. Got answers? Post responses, enlighten the community, and earn points! See how points get you privileges within the community."
3. Go to link to see how points get you privileges.
4. Read what points are...
OK, so it explains how to get points and that they give you privileges, but no mention of how points get you privileges or link to that information. Not that I really care, but pointing it out. Is it just another "status" in our communities for people to feel good about [authoratative, look at me], or does it really provide something worthwhile relative to being helpful and providing Apple's support for them?

Refer to ... 'More like this', this page, right hand column, bottom entry ... 'What's the benefit of accruing points in Apple communities'
Carolyn Samit's excellent answer details all the levels and the justification for taking part in community discussions.
Personally, simply scouting around the different sections is an education in itself and I would heartily recommend you to take an interest.

HT1725 Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

How to get maximal value from the data/class for show in Map legend

I make WAD report that using Map Web Item.
I devide to four (4) classes for legend (Generate_Breaks).
I want to change default value for the class by javascript and for this,
I need to get maximal value from the class.
How to get maximal value from the data/class.
please give me solution for my problem.
Many Thx
Eddy Utomo

use this to get the following End_date
<?following-sibling::../END_DATE?>
Try this
<?for-each:/ROOT/ROW?>
==================
Current StartDate <?START_DATE?>
Current End Date <?END_DATE?>
Next Start Date <?following-sibling::ROW/END_DATE?>
Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
================
<?end for-each?>
o/p
==================
Current StartDate 01-01-1980
Current End Date 01-01-1988
Next Start Date 01-01-1990
Previous End Date
================
==================
Current StartDate 01-01-1988
Current End Date 01-01-1990
Next Start Date 01-01-2005
Previous End Date 01-01-1988
================
==================
Current StartDate 01-01-2000
Current End Date 01-01-2005
Next Start Date
Previous End Date 01

I deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

i deleted most visited, latest headlines, getting started, yahoo, youtube, apple in mozilla's folder,how to get it back like the first time i installed? thx

if you hid the menu bar and the navigation bar simply press the alt button, this will bring back the menu bar and form there you can right click and select which bars you want shown

How to get Open Balance for the year and Total Ending Balance?

For a given account, how to get Open Balance for the year (Cumulative Ending Balance) and Total Ending Balance (Cumulative Ending Balance)?
Is there any function module available? or should I read from some tables? Please advice.

Hello Paul,
You could try calling one of the following BAPIs - see which one meets your requirement. They are documented well so shouldn't be a problem finding out the correct one for your requirements.
BAPI_GL_GETGLACCBALANCE
BAPI_GL_GETGLACCCURRENTBALANCE
BAPI_GL_ACC_GETBALANCE
BAPI_GL_ACC_GETCURRENTBALANCE
BAPI_GL_ACC_GETPERIODBALANCES
BAPI_COND_VAL_DECRE_BALANCES
You might have to put in some of your own logic after the BAPI call to get what you want.
Hope this helps,
Cheers,
Sougata.
p.s. Also look at FM FAGL_GET_ACCOUNT_BALANCE
Edited by: Sougata Chatterjee on May 7, 2008 11:47 AM

How to get the information of the framerate and bitrate in receiving side

Similar Messages

Maybe you are looking for