How to get the job name and details in a report format - sm37 details I mea

I need to extract the Job names and the job steps that comeout of a report?
Is there a standard program for this ?
Which tables store this information for me to write a custom report?
thanks,
Ven

Hi Venkatabby,
Check out the table:
TBTCS
Thanks,
Chidanand

Similar Messages

How to get the class name and field name dynamically

Hi
I have a class (ex: Contract) the fields (ex : a,b,c) .i need to get the class name and field name dynamically
ex
if( validation file for the field Contract.a){
return contract.a;
}else if(validation file for the field Contract.b){
return contract.b;
how to pass the field name and object dynamically
Please help me .............
Thanks in Advance..
Edited by: 849614 on Aug 11, 2011 6:49 AM

YoungWinston wrote:
maheshguruswamy wrote:
Agreed, but IMO, i still feel its best if there is no tie in between consumer class level details and the database it talks to. A service layer is needed in between them.Sounds like you've done a bit of this before. Me, I've either been a modeller/DBA, doling out data, or a nuts and bolts programmer (and actually more toolmaker than apps, but did a bit of that too).
Do you know of a good book about the "middle ground" (ie, these service layers)? I understand it empirically, but haven't had a lot of exposure to it.
Winston
Edited by: YoungWinston on Aug 11, 2011 10:34 PM
PS: Apologies. Edited my previous post, presumably while you were composing your reply, when I finally realized what '.filed' meant.Most of my work is in web development, never been a DBA :) . The biggest 'concern' in my shop is 'separation of concerns'. The UI group reports up to a different IT head, the DB group reports up to a different IT head and so on. The looser the coupling between these systems, the lesser the project costs (Integration, QA etc) are. Martin Fowler's books contain good information about separation of concerns in an enterprise environment. The two books which i recommend are
[url http://www.amazon.com/Patterns-Enterprise-Application-Architecture-Martin/dp/0321127420]Enterprise Application Architecture and
[url http://www.amazon.com/Enterprise-Integration-Patterns-Designing-Deploying/dp/0321200683/ref=pd_sim_b_1]Enterprise Integration Patterns

How to get the table name and bind columns names in an INSERT statement ?

I have an INSERT statement with input parameters (for example
INSERT INTO my_table VALUES (:a, :a, :a)) and I want to know
without parsing the statement which is the name of table to
insert to and the corresponding columns.
This is needed to generate the SELECT FOR UPDATE statement to
refetch a BLOB before actually writing to it. The code does not
know in advance the schema (generic code).
Thanks in advance,
Joseph Canedo

Once you have prepared your statement, you can execute the
statement with the OCI_DESCRIBE_ONLY mode before binding any
columns. Then you can use OCIParamGet to find out about each
column (column index is 1-based). You should get OCI_NO_DATA or
ORA-24334 if there are no more columns in the statement. Note
that the parameter descriptor from OCIParamGet is
allocated/freed internally by OCI; you do not need to manage it
explicitly. The parameter descriptor is passed to OCIAttrGet in
order to obtain for instance the maximum size of data in the
column OCI_ATTR_DATA_SIZE. You can also get the column name in
this way, although I do not remember the #define off the top of
my head. Getting the table name appears to be much more
difficult; I have never had to do that yet. Good luck. -Ralph

How to get the column name and table name with value

Hi All
I have one difficult requirement
I have some column values and they have given some alias column names but i need to find the correct column name and table name from the database.
For example value is "SRI" and i dont know the table and exact column name so is there any possibilities to find the column name and table name for the given value
Thanks & Regards
Srikkanth.M

Searching all the database for a word...
Courtesy of michaels...
michaels> var val varchar2(5)
michaels> exec :val := 'as'
PL/SQL procedure successfully completed.
michaels> select distinct substr (:val, 1, 11) "Searchword",
                substr (table_name, 1, 14) "Table",
                substr (t.column_value.getstringval (), 1, 50) "Column/Value"
           from cols,
                table
                   (xmlsequence
                       (dbms_xmlgen.getxmltype ('select ' || column_name
                                                || ' from ' || table_name
                                                || ' where upper('
                                                || column_name
                                                || ') like upper(''%' || :val
                                                || '%'')'
                                               ).extract ('ROWSET/ROW/*')
                   ) t
--        where table_name in ('EMPLOYEES', 'JOB_HISTORY', 'DEPARTMENTS')
       order by "Table"or
11g upwards
SQL> select table_name,
       column_name,
       :search_string search_string,
       result
from (select column_name,
               table_name,
               'ora:view("' || table_name || '")/ROW/' || column_name || '[ora:contains(text(),"%' || :search_string || '%") > 0]' str
          from cols
         where table_name in ('EMP', 'DEPT')),
       xmltable (str columns result varchar2(10) path '.')
TABLE_NAME                     COLUMN_NAME                    SEARCH_STRING                    RESULT
DEPT                           DNAME                          es                               RESEARCH
EMP                            ENAME                          es                               JAMES
EMP                            JOB                            es                               SALESMAN
EMP                            JOB                            es                               SALESMAN
4 rows selected.

How to get the Host name and port number

Hi all,
I am working in xRPM. I need to get the server name, host name & port number for the portal and i need to diaplay as a link in the Workflow step. I cant give the portal link as static, as it will vary depends on the DEV, QUAL, PROD. Is there any FM or class is available, so i can get the server name, port no. for my purpose?.
Regards,
Vinoth

Hi Kanagaraja,
My client has configured the portal and backend in different stack. So when i execute the FM you provided and with class: CL_HTTP_SERVER, CL_WD_UTILITIES, i am getting only the backend host name and port no. not the portal's info. So please help is there any way we can get the portal's info.
Thanks for your reply.
-Vinoth

How to get the column name and table name from xml file

I have one XML file, I generated xsd file from that xml file but the problem is i dont know table name and column name. So my question is how can I retrieve the data from that xml file?

Here's an example using binary XML storage (instead of Object-Relational storage as described in the article).
begin
dbms_xmlschema.registerSchema(
    schemaURL       => 'my_schema.xsd'
, schemaDoc       => xmltype(bfilename('TEST_DIR','my_schema.xsd'), nls_charset_id('AL32UTF8'))
, local           => true
, genTypes        => false
, genTables       => true
, enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS
, options         => dbms_xmlschema.REGISTER_BINARYXML
end;
genTables => true : means that a default schema-based XMLType table will be created during registration.
enableHierarchy => dbms_xmlschema.ENABLE_HIERARCHY_CONTENTS : indicates that a repository resource conforming to the schema will be automatically stored in the default table.
If the schema is not annotated, the name of the default table is system-generated but derived from the root element name :
SQL> select table_name
2 from user_xml_tables
3 where xmlschema = 'my_schema.xsd'
4 and element_name = 'employee';
TABLE_NAME
employee1121_TAB
(warning : the name is case-sensitive)
To annotate the schema and control the naming, modify the content to :
<?xml version="1.0" encoding="UTF-8" ?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xdb="http://xmlns.oracle.com/xdb">
<xs:element name="employee" xdb:defaultTable="EMPLOYEE_XML">
    <xs:complexType>
Next step : create a resource, or just directly insert an XML document into the table.
Example of creating a resource :
declare
res boolean;
doc xmltype := xmltype(
'<employee>
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>'
begin
res := dbms_xdb.CreateResource(
           abspath   => '/public/test.xml'
         , data      => doc
         , schemaurl => 'my_schema.xsd'
         , elem      => 'employee'
end;
The resource has to be schema-based so that the default storage mechanism is triggered.
It could also be achieved if the document possesses an xsi:noNamespaceSchemaLocation attribute :
SQL> declare
2
3    res boolean;
4    doc xmltype := xmltype(
5 '<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
6             xsi:noNamespaceSchemaLocation="my_schema.xsd">
7    <details>
8      <emp_id>1</emp_id>
9      <emp_name>SMITH</emp_name>
10      <emp_age>40</emp_age>
11      <emp_dept>10</emp_dept>
12    </details>
13   </employee>'
14   );
15
16 begin
17    res := dbms_xdb.CreateResource(
18             abspath   => '/public/test.xml'
19           , data      => doc
20           );
21 end;
22 /
PL/SQL procedure successfully completed
SQL> set long 5000
SQL> select * from "employee1121_TAB";
SYS_NC_ROWINFO$
<employee xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceS
<details>
    <emp_id>1</emp_id>
    <emp_name>SMITH</emp_name>
    <emp_age>40</emp_age>
    <emp_dept>10</emp_dept>
</details>
</employee>
Then use XMLTABLE to shred the XML into relational format :
SQL> select x.*
2 from "employee1121_TAB" t
3     , xmltable('/employee/details'
4         passing t.object_value
5         columns emp_id   integer      path 'emp_id'
6               , emp_name varchar2(30) path 'emp_name'
7       ) x
8 ;
                                 EMP_ID EMP_NAME
                                      1 SMITH

How to get the login name and password

Hi,
I had installed the SAP NW2004s on Windows platform with MaxDB as backend.
The master user name and password which i used for instllation was
Username :Administrator
password:trustno1.
My SAPSID and DBSID is J2E
Now i want to login into maxdb
how should i procedd
IF i fire the following commnd
dbmcli -d J2E -u Administrator,trustno1
i get the follwoing error
C:\sapdb\programs\bin>dbmcli -d J2E-u Administrator,punadmin
Error! Connection failed to node (local) for database J2E: ERR_USRFAIL: User aut
horization failed
Please help.

Hi Manoj,
You are trying to login into database using SAP level user:Administrator. Try login using <sid>adm/SAPService<SID> user or the database user. For more info on MAXDB adminsitration please check:
<a href="https://websmp230.sap-ag.de/sap(bD1kZSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=846890">MAXDB admin</a>
Also check OSS note 143412.
Please award points accordingly.
Regards.
Message was edited by:
Ruchit Khushu

Get the font names and image names in QXD

Hi,
How to get the font names and image name in Quarkxpress document file using java?.
Is any third party packages for getting font n image names in QXD?
thanks,
nithya

rtuck,
I believe this may solve it:
Open System Preferences and go to Accessibility. Next, select Display from the source list along the left, then check the box labelled Reduce transparency.
It was first presented in this post #15 by TheUlser:
https://forums.adobe.com/message/6854594#6854594

How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

How do I get the user name and password for the Apple Extreme Router to connect to a Slingbox

How do I get the user name and password for the Apple Extreme Router to set up my Slingbox? It will not accept the Apple Extreme Name and password.

The AirPort Extreme does not have a User Name, but it does have a device name and device password, which you may have already tried.
There is also a Wireless Network Name and Wireless Network Password for the AirPort Extreme, which might be what the Slingbox is looking for if you are trying to connect it to your wireless network.
There are no other "user names" or "passwords" on the AirPort Extreme.
You established the device name, device password, wireless network name and wireless network password when you originally configured the AirPort Extreme.
If you cannot remember these, you will need to perform a Soft Rest to reset everything. Follow the instructions in this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ

How to get the Text name to pass in the parameter header in save_text

Hi,
I am trying to change the long text of operation for historical order by using the flat file.I am using the save_text to do this.I would like to know how to get the text name in order to pass the parameter header in save_text.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates and where is this value updated in the table so that i can link it thru the order no to get the link and pass it in the text_name.
can anyone help me out?
krishnan

Hi,
Your query is.
I went to the tcode iw62 to get the header information of the long text.300100000009200000001
i would like to know what this 1000000092 indicates
In above number
300 - Client
1000000092 - AUFPL - Routing number of operations in the order (You can fetch this from table HIVG)
00000001 - APLZL - General counter for order ( You can fetch this from table HIVG).
BR,
Vijay

How to get the specific name of the workset which is currently selected by the user in sap portal 7.0

Dear Expert,
I have one requirement like to read the selected workset name in portal by the current user.I have read two documents regarding how to retrieve the PCD contents (iViews, Pages, Worksets and Roles) and its properties like Created by, Changed by, Last changed by and others using PCD API.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/6112ecb7-0a01-0010-ef90-941c70c9e401?overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/508baf88-9335-2d10-efa6-c6ad61e5fc4b?quicklink=index&overridelayout=true
But I am not able to understand how to get the specific name of the workset which is currently selected by the user.Can you please help me.
I am using portal 7.0.
Thanks & Regards,
Patralekha

Hi Expert,
I found that we can use Interface INavigationHelperService to read Portal Role selected by user at runtime from http://scn.sap.com/thread/52194
But this class is available in SAP NetWeaver 7.30 Enterprise Portal .
But in SAP NetWeaver 7.0 Enterprise Portal that interface is not available.
INavigationService is available there.
But didn't get any proper discussion on this interface for the same requirement.
Can you please help me.
Thanks & Regards,
Patralekha

How to get the VARIANT name in the program

Hi Guys,
Can somebody tell me how to get the VARIANT name in a program.
I have to perform some code with specific variant only. So I want to check in program which variant has been used to call the program.
Thanks,

Hi,
Variants are stored in table VARI and VARID.
You can use RS_ALL_VARIANTS_4_1_REPORT to get all the variants for a report program.
please check out the link below it will be helpful to you
Re: Programs for a transaction variant
Hope this helps.
ashish

How to get the role name in which query is published ?

Hi Experts,
Is there any table where i can get the name of the role in which a particular query is published. I know that if i have a role , i can check in pfcg giving that role name and in menu tab i can see all the queries published under that role. But if i know query but not role how to get the role name . Is there any table or functon modules or programs to get the information.
Thanks & Regards
Vamsi Kiran

Check this table
AGR_HIER

How to get the field name of an internal table during runtime?

How to get the field name of an internal table during runtime?

Hi Sudhir,
Declare and Use Get Cursor Field in Your Prm to get the field Name of the Intenal Table
Example Code:
    <b> DATA: v_field(60).                        " Insert this code.
     GET CURSOR FIELD v_field.        " Insert this code.</b>
     <b>CHECK v_field = 'ITAB-KUNNR'.    " Insert this code. (or)
Write: v_field.</b>
Regards,
Ramganesan K.

How to get the job name and details in a report format - sm37 details I mea

Similar Messages

Maybe you are looking for