How to get the real time controller download file for cRIO 9074
Hello
I am a beginner of LabView. Now I do a project in school with cRIO 9074.
My problem is that I have deleted the embedded controller system by fault. But in the Measurement and Automation software I didn't find the controller sysyem which have the fonction of monitor on line. How can I download the load file?
Wait for your help, and thank you for your help very much.
Solved!
Go to Solution.
Even if you format the cRIO system it should be found by the MAX and by opening the Software config you can reinstall the system files assuming that they are installed on the connecting system (PC).
So you have to use the MAX to setup the cRIO. Maybe it is of help to set the DIP switches to NoApp and IPReset first.
Hope it helps
Christian
Similar Messages
-
How to get the Real Path of a file which is accessed by URL?
iam using tomcat6.0.
I have a file xyz.xml at the top of the webapplication HFUSE which i can able to access by URL
http://localhost:8080/HFUSE/xyz.xml
My problem is how to get the realpath of the file "xyz.xml" for reading and writing purposes.
I tried various things but i could not able to successfully solved the problem?
1) File f = new File("/xyz.xml");
print(f.getAbsolutePath()) ============== it is not fetching the file @ http://localhost:8080/HFUSE/xyz.xml rather it is creating a file
at the root of the drive where eclipse is running.
2) File f = new File("xyz.xml");============> this is also not working , it is creating the file xyz.xml in the eclipse directory ..................
Can anyone please guide on this problem?RevertInIslam wrote:
If you want your context root(i.e HFUSE)
use this:
request.getContextPath() //where request is HttpServletRequest object to get the needful path.
e.g:
File f = new File(request.getContextPath()+"/xyz.xml");//it will create the file inside HFUSE.
Hope this helps.
Regards
BWrong. The File constructor expects an absolute filesystem path. The HttpServletRequest#getContextPath() doesn't return the absolute filesystem path, it only returns the relative path from the current context root. Use ServletContext#getRealPath() instead, it returns the absolute filesystem path for the given relative path from the current context root.
File file = new File(servletContext.getRealPath("/"), "xyz.xml"); -
How to get the real-time data from a CCD camera in labview?
I am going to setup a monitor system and need to acquire the intensity of each pixel at each second from a CCD camera. Also, I need to to some simple calculations with these real-time data at every moment to get my finanl output in this monitor system.
How may I do this using Labview?
Thank you very much.
KaiWe don't have special powers, so we can't guess if you have Imaq Vision or not, if your camera comes with a LabVIEW driver, if it has an USB interface, or firewire, or a dedicated NI card, if you just want to detect a move, or a change in intensity, etc...
So, try to be more specific with your question, that will helps a lot
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Could u plz help me to find simple example for how to save data file in a spread sheet or any other way in the real time controller for Sbrio 9642 using memory or usb flash memory
Here are a few Links to a helpful Knowledge Base article and a White Paper that should help you out: http://digital.ni.com/public.nsf/allkb/BBCAD1AB08F1B6BB8625741F0082C2AF and http://www.ni.com/white-paper/10435/en/ . The methods for File IO in Real Time are the same for all of the Real Time Targets. The White Paper has best practices for the File IO and goes over how to do it.
Alex D
Applications Engineer
National Instruments -
How to get the system time in a Swing application ?
I know how to do it in JavaScript, but not java. Please help me, and also how to get the system time in an Applet. Thanks !!!
Check this link, I hope it helps
http://202.71.136.142:8080/globalleafs/Swing/View.jsp?slno=22&tbl=0 -
How to get the content in embed swf file in Swf Loader on run time
How to get the content in embed swf file in Swf Loader on run time
[Bindable]
[Embed(source="assets/index.swf")]
private var SWFSRC:Class;
<mx:SWFLoader id="_swfloader" source="{SWFSRC}" />Hi Flex harUI,
Throw the error.
Access of undefined property content -
How to get the end time of an Interface?
How to get the end time of an Interface?
Hi,
As per your reuirement. I will suggest to use IKM SQL to SQL append. and Before Insert statement in IKM u need to add one more step i.e update. Your update should be like this
command on sourse.
<%for (int i=0; i < odiRef.getDataSetCount(); i++){%>
<%=odiRef.getDataSet(i, "Operator")%>
select <%=odiRef.getPop("DISTINCT_ROWS")%>
<%=odiRef.getColList(i,"", "[EXPRESSION]\t[ALIAS_SEP] [CX_COL_NAME]", ",\n\t", "", "((INS and !TRG) and REW)")%>
from <%=odiRef.getFrom(i)%>
where <% if (odiRef.getDataSet(i, "HAS_JRN").equals("1")) { %>
JRN_FLAG <> 'D'
<%} else {%>
(1=1)
<% } %>
<%=odiRef.getJoin(i)%>
<%=odiRef.getFilter(i)%>
<%=odiRef.getJrnFilter(i)%>
<%=odiRef.getGrpBy(i)%>
<%=odiRef.getHaving(i)%>
<%}%>
Command on target..
UPDATE <%=odiRef.getTable("L", "TARG_NAME", "A")%> T
set <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> ='N',
<%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD1)")%> =SYSDATE
where (<%=odiRef.getColList("","T.[COL_NAME]", ", ", "", "UK")%>)
in(<%=snpRef.getColList("", ":[CX_COL_NAME]", ", ", "", "UK")%>) and <%=odiRef.getColList("", "T.[COL_NAME]", ",\n\t", "", "(UD2)")%> <> 'N'
check UD1 and UD2 columns.
Hope this will help you.
Regards
Saurabh -
HT201210 I had the ios 7 beta and now I cant figure out how to get the real update
I have the IOS 7 beta currently on my phone however now I can't figure out how to get the real update
Be sure to log into developer.apple.com using your developer ID. there should be support on these issues.
-
How to get the real reason of bdb's err?
The application used some bdb's c-funcs, and get a err-log like below:
PANIC: fatal region error detected; run recovery
txn_checkpoint: log failed at LSN [1 6638626] DB_RUNRECOVERY: Fatal error, run database recovery
How to get the real reason of the err?
I tried to using db_printlog. But it print all the info of the log file. Another question is:
How to get the info of exact place?The question is still there. Could someone help me?
-
How to get the recovery time of transient response of a power supply with Labview basic package without analysis option? Does anyone have any idea or some similar function SUBVIs?
Recovery time of transient response is defined as the time from the beginning of the transient to the voltage point on the waveform fallen into 10percent of the overshoot. Well, the waveform is something like a pulse with a soft slope.I recommend plotting your data on a graph on paper. Take a look at the data, and determine what is unique about the point you are looking for. Look for how you can teach your program to look for this point.
I have written several algorithms that do similar, one in fact being for a power supply, the other being for RPM. Neither algorithm used any advanced analysis tools. They are just a matter of determining, mathematically, when you achieve what you are looking for. Just sit down with your graph (I recommend multiple copies) and draw horizontal and vertical lines that determine when you get to the point you are looking for. You are probably going to have to reverse the array and start from the end, so think in those terms.
If you have trouble, emai
l me a bitmap of the graph, and what you are looking for and I will try to be of further assistance. Don't do that however; until you you have given this a few tries. Your solution should be involve a lot of logic on analog levels.
Good luck -
How to get the CPU time of a query?
Hello all, will someone pls tell me how to get the CPU time instead of Elapsed Time of a query?
Thanks.If i am not wrong, Jonathan Lewis blogged about the changed behaviour.
Here is short test:
SQL> CREATE OR REPLACE FUNCTION Cpu RETURN NUMBER IS
2 Retval NUMBER;
3 BEGIN
4 SELECT m.VALUE
5 INTO Retval
6 FROM V$statname s, V$mystat m
7 WHERE s.Statistic# = m.Statistic#
8 AND NAME = 'CPU used by this session';
9 RETURN Retval;
10 END;
11 /
Function created.
cat cpu_test.sql
DECLARE
TYPE t IS TABLE OF NUMBER;
tt t;
BEGIN
dbms_output.put_line(cpu());
SELECT COUNT(*) over(PARTITION BY owner) BULK COLLECT INTO tt FROM all_objects;
dbms_output.put_line(cpu());
SELECT COUNT(*) over(PARTITION BY object_type) BULK COLLECT INTO tt FROM user_objects;
dbms_output.put_line(cpu());
SELECT COUNT(*) over(PARTITION BY owner) BULK COLLECT INTO tt FROM dba_objects;
dbms_output.put_line(cpu());
END;
SQL> select * from v$version
2 /
BANNER
Oracle9i Enterprise Edition Release 9.2.0.6.0 - Production
PL/SQL Release 9.2.0.6.0 - Production
CORE 9.2.0.6.0 Production
TNS for Linux: Version 9.2.0.6.0 - Production
NLSRTL Version 9.2.0.6.0 - Production
SQL> @cpu_test
0
0
0
0
PL/SQL procedure successfully completed.
SQL> @cpu_test
106
106
106
106
PL/SQL procedure successfully completed.
SQL> select * from v$version
2 /
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for Linux: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
SQL> set serveroutput on
SQL> @cpu_test
1
129
130
145
PL/SQL procedure successfully completed.
SQL> @cpu_test
145
273
275
290
PL/SQL procedure successfully completed.Best regards
Maxim -
How to get the number of decimal places configured for a site column
Hi,
I have a column 'SampleNumCol' of type Number, the number of decimal places to be displayed is configured as 2.
The column conatins a value, but when retrieved programatically is displayed as 5.00000000 instead of 5.00.
I am retrieving this column using listitem.Properties[field.InternalName].
I need to trim the decimals based on number of decimal places configured for the site column.
How to get the number of decimal places configured for a site column?
Thanks in advance,
dhijitGet the field as SPFieldNumber and then check DisplayFormat which returns
SPNumberFormatTypes
SPFieldNumber numberField = list.Fields.GetFieldByInternalName("YourNumberFieldName") as SPFieldNumber;
SPNumberFormatTypes numFormatType = numberField.DisplayFormat; -
How to get the absolute path of a file from the local disk given the file n
how to get the absolute path of a file from the local disk given the file name
// will look for the file at the current working directory
// this is wherever you start the Java application (cound be C: and your
// application is located in C:/myapp, but the working dir is C:/
File file = new File("README.txt");
if (file != null && file.exists())
String absolutePath = file.getAbsolutePath(); -
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for NI-Visa? TIA
This question has already been addressed in this thread:
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa?
John M
National Instruments -
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Does anyone know how to get the vendor ID and product ID for a USB device in NI-Visa? TIA
Hello,
Exactly which USB device are you referring to? Is the device a NI product?
The Product ID for National Instruments DAQPad-6020E is 0x12C0. The USB vendor ID is 0x3923. This is a 16-bit hexadecimal number(1093) (that is decimal 4243).
Also, here's a document on our website that will help you in configuring NI-VISA to control your USB device:
http://zone.ni.com/devzone/conceptd.nsf/webmain/6792BAB18242082786256DD7006B6416?opendocument
Swapnil P.
National Instruments Engineer
Maybe you are looking for
-
I have a 128 GB SSD drive and I bought a 512 GB SSD recently. I used the disk copy utility to copy all the information from the 128 GB drive to the 512 GB drive. However, Windows 7 Ultimate N x64 is asking me to enter my key for validation. Unfortun
-
Does the Apple ID on my Mac have to match the ID on my Iphone
My Iphone has a .me apple ID for its icloud. However my Mac icloud has a different email address. I would prefer to use the email address on my mac for everything from icloud to itunes etc. Is it possible to change the .me apple ID on my iphone to ma
-
Now that I've gone and ordered a new Pro I will soon have 3 desktops and a laptop. I've been using one monitor (a Dell 21" 1600x1200) for the two desktops (one on the DVI and the other on the VGA inputs) and seperate keyboards and mice. The laptop ha
-
Gpg-agent is mysteriously started by systemd
So I recently switched from initscripts to systemd. Now when I use SSH, gpg-agent tries to save my passwords, but I can't figure out how it got started. It's definitely running, started by systemd (or at least, orphaned such that it is parented on sy
-
When I purchased my notebook Itunes was a feature. After I used it about 6 months ago my computer crashed and I had to reinstall everything. I need to know how to get back my purchases from Itune store?