How to get USB device in the list of VISA resource Name field of VISA Open VI

I have followed the below tutorial to communicate with my device using USB port. But i didn't get the name of the USB port in Measurement & Automation Explorer devices list. How to get it? Can anyone suggest something?
http://zone.ni.com/devzone/cda/tut/p/id/4478
Solved!
Go to Solution.

Hi kimhyun,
                 I have attempted this.But succeeded.I used pendrive as my USB device.my sugesstion is you don't disconnect your device at any point of your work.Check the device is connected properly.IF your system has recognized your device,you can view the device in control panel>>Device Manager>>Then open your particular device from the list of connected device then Details>>device description>>Hardware Ids>>Then you can find your vendor id there.
Try this.I think your device is loosly connected.Which USB device are you using??Also you must install THE DRIVER OF YOUR USB DEVICE.
GOOD LUCK
Thanks as kudos only

Similar Messages

  • I excluded iphone from controls in Keynote. How I get it back on the list to use Keynote remote?

    I excluded iphone from controls in Keynote. How I get it back on the list to use Keynote remote?

    Welcome to the Apple Community.
    If you haven't turned find my phone off on the device, it should just reappear next time it is connected to an appropriate network. If you have turned off find my phone, turn it back on.

  • How to get multiple values from the list

    I've a list of an item which I queried it from the database. I also created a button that will takes a selected items from the list when it was clicked. I used javabean to get the data from database.
    <%     // clicked on Select District Button
    Vector vselectedDistrict = new Vector();
    Vector vdistrictID = new Vector();
    String tmpSelectDistrict = "";
    tmpSelectDistrict = request.getParameter("bSelectDistrict");
    if(tmpSelectDistrict != null)
         // get multiple values from the list
         String[] selectedDistrict = request.getParameterValues("usrTDistrict");
         vselectedDistrict.clear();
         vdistrictID.clear();
         if((selectedDistrict != null) && (selectedDistrict.length != 0))
                             for(int i=0;i<selectedDistrict.length;i++)
                   vselectedDistrict.addElement(selectedDistrict);           
              vdistrictID = dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
              for(int i=0;i<vdistrictID.size();i++)
                   out.println("district = " + selectedDistrict[i]);                         out.println("district ID= " + vdistrictID.get(i).toString());
    %>
    // get vdistrict from the database here......
    <select name="usrTDistrict" size="5" multiple>
    <%     for(int i = 0; i< vdistrict.size(); i++)
    %>
         <option value="<%=vdistrict.get(i).toString()%>"><%=vdistrict.get(i).toString()%></option>
    <%
    %>          
    </select>
    <input type="submit" name="bSelectDistrict" value="Select District">
    Lets say the item that i selected from the list is 'Xplace' and I clicked on the Select District button,
    what I got is this error message:
    org.apache.jasper.JasperException: Unable to convert string 'Xplace' to class java.util.Vector for attribute usrTDistrict: java.lang.IllegalArgumentException: Property Editor not registered with the PropertyEditorManager
    So where is going wrong and what the message means?. Any help very much appreciated. Thanks

    These are just guesses that might hopefully steer you in directions you haven't looked in yet.
    I presume you used triangle brackets (< >) to avoid having the Jive Forum think it was the "italics" tag?
    Are you certain this: dbaseInfo.getcurrentDistrictID(nstate,vselectedDistrict);
    expects a Vector as its second parameter? And returns a Vector?
    I don't believe you've shown how you use the javabean, or its code? Perhaps it should be rewritten to accept an array of strings instead of a Vector?

  • How to identify specific devices on the list of connected devices

    I have 7 devices according to the list under manasge devices. According to this list, I have three iphones identically listed (I actually have two which have different names in the about field) and I have two iPad's (I actually have 1 iPad and 1 iPad mini). The two computers I have connected are listed correctly according to how I list them inside the computer. I changed the name of my iPhone 4S but no change has resulted  in the manage devices page.
    This is clearly a stupid situation. Why can't the manage devices page reflect what I actually call my devices or at least the serial number?
    Can someone please help me clear up this situation asap?

    To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
    Advanced > Port Mapping tab
    o Click the "+" (Add) button
    o Service: <skip this setting as you will be custom configuring which ports you need opened for the TiVo>
    o Public UDP Port(s): <enter the appropriate UDP port values>
    o Public TCP Port(s): <enter the appropriate TCP port values>
    o Private IP Address: <enter the IP address of the host server>
    o Private UDP Port(s): <enter the same as Public UDP Ports or your choice>
    o Private TCP Port(s): <enter the same as Public TCP Ports or your choice>
    o Click "Continue"

  • How do you remove devices from the device list when setting up 2-step verification for your apple id?

    When setting up 2-step verification for my Apple ID, I get a list of devices to verify.  My list has my old iPhone 4 and my old iPad, which I don't have either of anymore.  Is there a way to remove these devices from the list?  Plus, both iPads that are listed don't give any indication of which one is my current iPad and which is my old iPad, so I'm not sure which one to verify.  What should I do there.

    For reference, I figured out how to identify which iPad was which so I could verify my iPad.  I went into the settings on my new iPad and changed the device name, started a iCloud backup (not sure if this was necessary but I wanted to make sure the device name change persited to the cloud) and then was able to see the new name on the device screen for 2-step verification.  Hopefully this helps someone if they have a similar problem.  I still am not sure how to remove old devices from the list.

  • My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    My Ipod 4th Gen will not turn on. When I hook it up to the computer I get the ITunes symbol and the usb device on the screen of the Ipod. When I go to restore the Ipod it will not restore. I am getting unknown error code 6.

    Likely this:
    Errors related to third-party security software
    Error 2, 4 (or -4), 6, 40, 1000, 9006
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    There may be third-party software that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your registry. Your default packet size being set incorrectly can cause these errors. Contact the manufacturer of the software that installed the packet size modification for assistance or follow this article by Microsoft: How to reset Internet Protocol (TCP/IP).
    Verify that access to ports 80 and 443 are allowed on your network.
    Verify that communication to albert.apple.com or photos.apple.com is not blocked by a firewall, or other Internet security setting.
    Discard the .ipsw file, open iTunes and attempt to download the update again. See the steps underAdvanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.
    Restore your device while connected to a different network.
    Restore using a different computer.

  • HT4889 Replacing System hard drive with a new one. How to get everything over to the new boot drive?

    Replacing System hard drive with a new one. How to get everything over to the new boot drive? Should I use Carbon Copy or does apple have a better untility to do this?
    I can't get my current system drive (OSX 10.8.3) to start on the first try. I always have to shut down and restart again to finally see the Apple logo.
    Have used disc utility to repair the disc and permissions several times and that works. The next time I boot up, it works fine and I get the apple logo, but then the second time I boot up, it's back to the blank screen again and it only boots after the second try.  I have tried this repair three different times now always with the same result. Works right the first try (after the repair) then from the second time on it doesn't work. I just get the white screen until I reboot a second time.
    Thinking I should change drives but what's the easist and best way to move everything over to the new drive so it will boot correctly with all my data on it. This is the system drive for a Pro Tools 10HD setup. MacPro 3,1 with 16 gigs ram and OSX10.8.3 on it.
    Thanks for any help!

    If you have a time machine back up of your current drive you can do this
    Shut down your computer, install the new drive. While the computer is off plug in the external hard drive that you have your time machine back up on. Hold Option key while the computer turnes on, let go of the option key once you get a grey screen. Shortly after you'll see  a list of bootable drives, select the one that has your time machine back up on it and boot into that drive.
    From there go into disk utility, format your new drive too, osx extended journaled ( I think, double check that, its been awhile since ive had to do this), hit format
    Exit disk utility and then you can use time machine to copy all your exisit data to the new hhd and then your pretty much done.
    There is also a program called Carbon Cloner that will do esentially the same thing however I've never uesed it.

  • Restored my 4S. How to get pictures back from the cloud?

    Background: I had a 3GS and on launchday of the 4S I picked one up. A white 32GB on AT&T to be exact.
    I had been having some issues with the battery, so today I figured I'd try and start fresh. Well, I backed up everything on the cloud, and I also backed up everything onto the computer in iTunes when I did the restore.
    I've got my music back. Cool.
    I've got my apps back. Great.
    I can't seem to figure out how to get my photos from the camera roll back. Nor do I know how or if it is even possible to get the photos and my old text messages back on this new restore. Also, none of my mail is coming back either.
    I can see my most recent backup in the iphone settings under iCloud. And I can also see my most recent computer backup on the computer. But I'm not sure what I need to do.
    Any help would be great. Thanks.

    OK - understood.
    There are a couple of ways of going about this. First, my recommended method:
    Restore from a backup (so your photos, SMS etc are on the phone
    Connect to iTunes
    Set the phone to sync photos to a relevant app on your desktop (what app depends whether you're Windows or Mac) - this gets your pics onto the desktop and safe.
    If you want to save SMS, use PhoneView (Mac) or TouchCopy (Windows) or similar to copy them off the phone
    Restore the phone as a new device
    Get the photos back the way you got music etc back - via iTunes sync
    The second method entails using one of the utuilities around the place that can extract from the backup - I have no experience with them, so I don't know how well they work. That's why I go for the first method - simpler, more robust.
    By the way, I came across this other method for SMS:
    http://hints.macworld.com/article.php?story=20090624022758268
    Hope this helps

  • How To Share USB Devices Between Two Mac's?

    I am musician and have several USB controllers that I would like to share between my Mac pro and my Macbook Pro. (drum pad, keyboard controller,USB midi interface etc.) I have seen several switches offered on the net, however they all seem to be for PC from what I have found really.
    Belkin 7-Port Desktop USB Hub (F4U017) was recommended but the language in the the description does not mirror the same types of functions I am seeing mentioned in units made specifically for the PC. (ie "share USB devices between 2 computers.") Did I taint my mind by looking at the PC items first? Is it really as easy as to plug two Macs into the same USB hub and share their devices? Does anyone have a working solution they are using for this type of situation? How do you do it?
    If I could share 7 USB devices between the two systems, I think I would be just this side close to Heaven in ease!
    thank you!
    Cheers,
    Marty

    Thank you for the lead Direwolf, it felt like there might be a little more to it than just connecting to a hub. I just converted from PC about 8 months ago. Loving my macs!! A KVM switch I had not thought of that. I will look into. I read the wiki page and it seems like a kvm would replace the screen sharing feature the two machines can now use easy enough, only without using the cpu overhead to do it??? (i think is what I understood)
    Does anyone have a model they are using and can recommend? (it's a jungle +out there+) I just did a quick search and found mostly kvm switches with 2-ports USB,. ... looking for seven, come on lucky seven! lol!
    I will keep looking. In the mean time if readers have additional ideas, I will be very grateful! Cheers!

  • Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks?

    Enyone know how to get USB stick back to normal after creating a USB boot disk for Mavericks? https://discussions.apple.com/message/23527458#23527458

    You should just be able to erase it using Disk Utiilty. I did with my 8Gb.
    If not I have a USB deep format tool, but it only works with Windows: http://tinyurl.com/mwor6s9
    You can download that and unzip it, then run it on a PC to fully erase and format the flash drive. Format it in FAT, and then the Mac will read and mount it so you cna once again format it with HFS extended for Mac use.

  • TS4006 remove the device from the list iCloud

    Hello, tell me how to remove the device from the list iCloud when m is that I had already sold and have no access to it?
    thank you

  • HT1212 ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

    ive changed my email on itunes and apple and att but my app store still shows my old id so it doesnt recognize me to add new apps...any clues how to get it changed on the phone

    Firstly, you need to change your details with Apple,  Start here, change your country if necessary and go to manage your account. You may have already done this.
    In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
    Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
    In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
    In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
    If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

  • I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    I am changing from Word to Pages. I have created my custom template with all my styles etc and that is what comes up when I go for a New Document. Fine. How do I get it to use the same Custom Template when I use Pages to open a Word document?

    The template is a document in itself, it is not applied to an existing document whether it is a Pages document or a Word document converted to a Pages document.
    You would need to either copy and paste content, using existing styles, or apply the styles to the converted Word document.
    You can Import the Styles from an existing document and those imported Styles can be used to override the current document's styles:
    Menu > Format > Import Styles
    The process is simplified if the styles use the same names, otherwise you will need to delete the style you don't want and replace it with the one that you do want when asked, then the substitution is pretty straightforward.
    Peter

  • How to get actual value from LOV list

    Like Subject says: How to get actual value from LOV list. Any help will be appreciated.
    Thanks.

    Thanks Shay, I did it with bind variable because I'm not using JSF. Is there any chance to post solution using standard JSTL or HTML expression. I have something like this: LOV displays some Companies names:
    <html:select property="UserJobCompanyId"
                             disabled="${!bindings[\'UserJobCompanyId\'].updateable}"
                             onchange="submitform();">
                  <html:optionsCollection label="prompt" value="index" property="UserJobCompanyId.displayData"/>                                                     
                </html:select>and I want to get CompanyID of selected Company.
    Thanks, again.

  • How to get maximal value from the data/class for show in Map legend

    I make WAD report that using Map Web Item.
    I devide to four (4) classes for legend (Generate_Breaks).
    I want to change default value for the class by javascript and for this,
    I need to get maximal value from the class.
    How to get maximal value from the data/class.
    please give me solution for my problem.
    Many Thx
    Eddy Utomo

    use this to get the following End_date
    <?following-sibling::../END_DATE?>
    Try this
    <?for-each:/ROOT/ROW?>
    ==================
    Current StartDate <?START_DATE?>
    Current End Date <?END_DATE?>
    Next Start Date <?following-sibling::ROW/END_DATE?>
    Previous End Date <?preceding-sibling::ROW[1]/END_DATE?>
    ================
    <?end for-each?>
    o/p
    ==================
    Current StartDate 01-01-1980
    Current End Date 01-01-1988
    Next Start Date 01-01-1990
    Previous End Date
    ================
    ==================
    Current StartDate 01-01-1988
    Current End Date 01-01-1990
    Next Start Date 01-01-2005
    Previous End Date 01-01-1988
    ================
    ==================
    Current StartDate 01-01-2000
    Current End Date 01-01-2005
    Next Start Date
    Previous End Date 01

Maybe you are looking for