How to give two spaces after new order in alv

hi
my issue is after every new order number they need two blank spaces, i know the procedure of giving new page for every new order but they need only two blank lines. (This is in ALV List format).
second thing is how to give footer
thanks

hi
use this variant of appendf for inserting blank lines
Append INITIAL LINE TO ITAB.
Effect
Appends a new line to the end of the internal table itab. You can only use this variant with index tables (standard or sorted table).
If you specify wa TO , the new line is taken from the contents of the explicitly specified work area wa.
If you use INITIAL LINE TO, a line filled with the correct initial value for the type is added.
If the part before itab is omitted, the new line is taken from the header line of the internal table itab.
If you use the ASSIGNING <fs> addition, the field symbol, <wa>, points to the line you have just appended. If you use the REFERENCE INTO ref addition, the data reference, dref, is filled with the reference of the line you have just appended.
If the target table itab is a SORTED TABLE, it must be sorted correctly after the append, otherwise a runtime error results.
After the statement has been executed, the system field SY-TABIX is filled with the index of the last line in the table.
Cheers
Snehi

Similar Messages

How many free disk space after install OS X lion (10.7) ?

Hi,
I would like to know that how many free disk space after install OS X lion (10.7) on MBA i5.
Many Thanks,
Eric

I want to buy MBA i5, I would like to free disk space of MBA 13" i5, Could anyone tell it to me? Thanks
As you're buing a new MacBook Air, it will come pre-installed with Lion. The actual installation will be somewhat larger than a "clean" Lion install as it will come with iLife preinstalled. Obviously, with an Air's limited storage space, you want to be sure that you have enough room for any applications and data that you'll want to keep on the SSD as well. It is fairly easy to upgrade the SSD on an Air:
http://eshop.macsales.com/shop/SSD/OWC/Aura_Pro_Express
The amount of RAM you have installed is probably more important. Fortunately, the newest 13" MacBook Airs all come with 4GB standard now.

How to give no of lines per page in alv report

hi
could anybody tell me
how to give no of lines per page in alv report
i need bottom of page too
if possible plz send the code too
it ll be very helpful to me
thanx
kals.

Hi,
This is possible, using some of the events in the ALV.
You could use AFTER_LINE_OUTPUT event and call you form after say, a certain line count is reached on the list output.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-name.
MOVE 'AFTER_LINE_OUTPUT' TO gw_event-form.
APPEND gw_event TO gt_events.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            it_events                = gt_events[]
and define the form for each event as follows - this would be a dynamic call by the ALV.
*&      Form after_line_output
*       Form for the After Line Output Event in the internal table
*      --> rs_lineinfo
FORM after_line_output USING rs_lineinfo TYPE slis_lineinfo.
IF sy-linno eq v_linno.          "Defaulted value for line count
    perform write_footer.
    NEW-PAGE.
ENDIF.
ENDFORM.                    " after_line_output
For lines per page:
rs_lineinfo-tabindex would give you the index of the current line in the list, which you could use to read the t_outtab table, and reduce the line count of items displayed on the earlier page.
There are a few other events too, like BEFORE_LINE_OUTPUT and END_OF_LIST which you can use as required and print the data.
Regards,
Anil.

HOW TO GIVE SINGLE SPACE IN SMARTFORMS

Hi All,
I create one smartform. In this i write a letter.
in this letter i need one single space in between following
line.
Sub: Balance Confirmation as on &EN_DT&
if i give single sapce between ON and &en_dt& then save and
activate then it removes the single space. But if give ,, in between ON and &EN_DT& then it gives double space .
if i delete and write that line again then it gives same o/p.
Please help me how to solve this problem.
Thanks
Dinesh

Hi Dinesh,
,, is used to give a TAB spacing.
So you have to define the tab spacing that you want.
For example,in your case you need single spacing.So you define single spacing for your tab.
This can be done in smart styles.
Follow these steps:
1) Go to SMARTSTYLES tcode.
2)Create a new smart stles or use the existing one if you have created.
3)Now go to paragraph formats.
4) If you have created one for yourr text edit that,or else press F5 to create a new paragraph format.
5)Now in the paragaraph formats window you will find a tab by name tabs.
6)Give the position as 1 and the unit and allignment of your choice.
7)If you are using more than one tab then you need to give thee position for all the tabs.
9)Now activate the smart styles
10) Go to the text elements where you have written your text and give the text as follows.This will now give single space instead of two spaces as it was previously.
Sub: Balance Confirmation as on ,, &EN_DT&
REvert for any other querries.
Reward points if helpfull
Regards,
Kaushik

Two spaces after a period

Where would I modifiy my CSS to allow for the appearance of
two literal spaces after each period in a paragraph. If you are
typing body text, Dreamweaver appears to assume you only meant one
space between sentences.

> how hard you have to push mere technicians
>The notion that people have to break a "bad"
> habit--setting off sentences with a space or two--is a
weird homage to
> herd
> mentality.
So says you, and you say it like a true elitist.
How can we ever show our gratitude for your taking time to
enlighten us.
HTML works the way it works. If you don't like it maybe you
should consider
a different medium to express your spectacularly superior
taste. All your
whining and wringing of hands is getting boring.
Goodbye.
Walt
"foxetown" <[email protected]> wrote in
message
news:f3ij1k$a4v$[email protected]..
> stevenkay,
>
> Here's my comment, from an earlier post: "...The site I
run is
> purposefully
> nostalgic (living history oriented) and I spend a lot of
my time looking
> at
> 18th and 19th century typesetting. I can't help thinking
that the double
> space
> used then looks better than the claustrophobic version
we've adopted now,
> even
> with proportional fonts..."
>
> The preponderance of "eye rolling" professionals who
regard the historic
> standard as "passe" is useful information. In my case,
it's an
> indication of
> how hard you have to push mere technicians to achieve a
standard this is
> outside the norm. I have to deal with a lot of
construction supervisors
> who
> don't know what cornice moulding is either, but they
just admit their
> ignorance.
>
> When you think about it--with respect to typography and
"saving
> space"--why
> have paragraphs at all? Why put margins on a web page?
Why set off
> text
> with white space? The notion that people have to break a
"bad"
> habit--setting off sentences with a space or two--is a
weird homage to
> herd
> mentality.
>
>
>

How to give constant space in sap scripts.

Dear experts,
In my requirement I am printing invoice line item details. In my program,I am printing 8 columns. How to give the constant space in my output.
My issue.: here am fetching Internal Excise Document Number (DOCNO) item number (zeile) plant (werks) quantity (menge) storage location (lgort) and so on.
when i am fetching the values from the table, the values are different from each and every rows. so nothing would be aligned properly into the column. For example, if the doc no is having 10 char,from item no all the values of the column is getting moved to right side. in my second row doc no is having only 2 chars. in this case every column value is moving left side. its looking like realigned and not good.
How do i give constant space for each and every column. so if the values are more or less it could not be moved to any side.
please hellp me to solve this issue.
<MOVED BY MODERATOR TO THE CORRECT FORUM>
Thanks in advance.
Regards,
Sandy.
Edited by: Alvaro Tejada Galindo on Sep 28, 2011 3:40 PM

Hi,
check out ur tab positioning in paragraph format...any misalignment is their or not.
second thing you can do is checkout your printer i.e zebra printer or .matrix etc. your using sometimes misalignment happens
in printer..or print some sample values for verifying the root cause .
regards,
KRISHNA

How to give two exlusive free goods to a customer

Hello Gurus,
Goodevening every body,
I have some is my current assignment-Customer is buying some material say "X" want "Y,Z" as exclusive free goods is it possible to give two free at a time in same order ?
Note- I only know one exlusive free good can be give to one material with combination of customer ( Customer/Material)
Looking for some inputs regarding the issue
Thanks in advance
Regards
Venkat

Hi Mohit ,
The client have been following the same but sales personal are doing some malpratice,To reduce the price of the total quantity they are entering the free goods manually at sales order level by giving excess free goods .
Note-Now manual entry is not allowed at sales order level .
For info i have seen some other reply saying to use BOM it is not suitable here bcoz main item and sub item are not constant here.
The typical thing here is some material chagred in particular order and same material is given at free of charge in another for different customer so not possbile to fix the Bom here in this case.
Other than this any other possiblities!!
Regards
Venkat

How to re-trigger BA00 after sales order has been rescheduled

Dear Gurus,
Could you please kindly advise how I could re-trigger BA00 after sales order has been rescheduled?
The scenario is following:
When the sales order was completed, the order confirmation output has been sent to the customer. But later, when the ATP confirmed quantity was changed or order was rescheduled, the committed delivery date has been changed. It caused confusion, because in the order confirmation letter we sent to customer, there is a different date.
I'd like to also trigger BA00 to resend the order confirmation, but I checked the output routine, it only checks if the order is completed or not. Shall I　ask ABAPer to add additional logic in the routine or there is other easier way to re-trigger BA00?
Many thanks in advance!

Have you allowed multiple issue for BA00 output type? In that case, you can manually trigger it from VA02. If you are trying to have it sent automatically, then add the logic into the routine.

In a Quiz the Correct Answer Buttons are too close to the answer letter. How to give more space?

When creating a quiz and previewing, the Buttons to select the correct answer are too close to the letter for the answer. How do I add space between them. Suggestions?

I think what you mean is that the quiz question's Failure action doesn't trigger until the final attempt and that would never happen if attempts is set to Infinite. So if you were only incrementing the variable when the quiz question registered final failure then you'd only get one crack at incrementing the variable. yes. My bad.
However, if you are using Multiple Choice questions, you can also trigger actions using the Advanced Answer Option. This will trigger an action when a particular answer is selected. So if you set this for each incorrect answer, you could increment the variable each time they select the wrong answer.
You can also use this same Advanced Answer action to execute a conditional action that first checks the value of the variable and then shows the rollover caption or increments the variable as needed.
Say you create a variable called WrongAnswer and initialise it with a value of 0. Then you create a Conditional Action called CheckWrongAnswer that looks like this:
If WrongAnswer is equal to 1 assign Wrong Answer with 2, (then on the next line) Show RolloverCaption, ELSE assign Wrong Answer with 1.
This shows the rollover caption after the second attempt resulting in an incorrect answer.

Text input - how set an automated space after each word?

When typing in text and using the qwerty assisted text - how can i get it to automatically add a space after each word? My Droid original did that automatically... Thanks

lovetennis7 wrote:
When typing in text and using the qwerty assisted text - how can i get it to automatically add a space after each word? My Droid original did that automatically... Thanks
I have confirmed that this feature was not included with the basic software package of the Incredible 2.

How to give two values of same field in read Statment

Hi,
Please Tell me how to give the two values of same field in read statements Condition.
i.e
Read table it_tab with key matnr = '1' or matnr = '2'.
With Regards
Kesavaperumal

Hi Kesavaperumal,
<li>You can not use OR operator with READ TABLE statement.
<li>You have to use different fields of the internal table in where condition.
<li>If you want to compare with two values, you need to use LOOP statement.
LOOP AT it_mara WHERE matnr = '1' or matnr = '2'.
"Write code
ENDLOOP.
Thanks
Venkat.O

How do I remove space after paragraph?

Does Robohelp have the "Remove Space after paragraph" button for reducing the space between lines, like the one in Word?

In HTML the space after is controlled by the style in your CSS file. You need to edit the style in the Style Editor.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Pages for iPad - how do I create space after a paragraph?

All I want is one line space after each numbered paragraph in a document.
When I press return twice, the numbering restarts!
Help.
Thanks.

On the iPad, documents are saved directly in the app in which they are created. Your Pages documents are saved automatically as you work on them. If you quit working on the document right now, your progress is saved on that file. No need to save like you would on a computer.
When you close Pages and come back to it later - all of your documents will be listed in thumbnail view on the first screen. Tap on the document that you want to work on and it will open.
There is a help feature within the app. Tap on the wrench icon in the upper right corner and select Help from the resulting menu.

How to reclaim the space after delete

Hi All,
Today we deleted large number of rows from one table, but we didn't get free space after that. So for testing purpose, I have created one test tablespace with 5mb size .Created a table and inserted n number of rows in that table and made the tablespace full.I checked in dba_segments(5mb) and dba_free_space tables.It shows perfectly.After that I deleted all the records and try to create a simple table,but it returns (ORA-01658: unable to create INITIAL extent for segment).I read some time back in tom's forum that delete willn't reclaim the space ,instead it will go to freelist of table..Is there any way to reclaim the space?(after delete)
and also I used to see the tablesize by using dba_segments table.but now it shows 5mb of size for the empty table.Is there any query to get the exact table size?Please help me to understand the concept.
Thanks,Jvel

880401 wrote:
Hi All,
Today we deleted large number of rows from one table, but we didn't get free space after that. So for testing purpose, I have created one test tablespace with 5mb size .Created a table and inserted n number of rows in that table and made the tablespace full.I checked in dba_segments(5mb) and dba_free_space tables.It shows perfectly.After that I deleted all the records and try to create a simple table,but it returns (ORA-01658: unable to create INITIAL extent for segment).I read some time back in tom's forum that delete willn't reclaim the space ,instead it will go to freelist of table..Is there any way to reclaim the space?(after delete)
and also I used to see the tablesize by using dba_segments table.but now it shows 5mb of size for the empty table.Is there any query to get the exact table size?Please help me to understand the concept.
Thanks,JvelDELETE simply deletes the specified rows. The blocks/extetents that were allocated to hold those rows remain allocated. The theory is that if the table once needed sufficient blocks/extents to hold 'x' rows, it may need so again at some time in the future. Allocating and de-allocating extents is a pretty expensive operation, so oracle is not going to waste time and resources constantly doing that just because you delete rows, which is a perfectly normal DML operation. Unless you don't expect that table to grow again, I'd not waste my time trying to reclaim the space.

How to determine the Installation after Work Order installs a new meter

Hi IS-U Experts,
I have a question about the integration of Work Orders and Installation of Devices as it relates to IS-U data.
Our understanding of a Meter (Installation) process is as follows:
1. A Work (Service) Order is generated by CS (or a Sales) process. At minimum, the Device Location (ES65) and the Device Category (Material) needs to be provided for.
2. A techniciation executes the Work Order to install the meter. After which, this work is confirmed (IW42) and a Goods Issue is done on installed Device. In our case, the technician decides actual Device Number based on his/her vehicle stock.
3. Now, we want execute the IS-U Device Installation (EG31). However, we don't know where to draw the IS-U Installation from. There is no IS-U specific reference on the Work Order for the Installation. (It would be nice if the Order Type had an IS-U releavant screen category (table TQBT) for such a reference).
We could create the Installation on the fly, but we need the IS-U Premise (ES60). Our expection, anyway, is to build IS-U data
prior to the Work Order execution as part of the CS process. We defer IS-U Installation only because the device number is determined at the time of installation.
How should the IS-U context data passed around in the Work Order?
Thanks, Ed

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

How to give two spaces after new order in alv

Similar Messages

Maybe you are looking for