How to determine the Installation after Work Order installs a new meter

Hi IS-U Experts,
I have a question about the integration of Work Orders and Installation of Devices as it relates to IS-U data.
Our understanding of a Meter (Installation) process is as follows:
1. A Work (Service) Order is generated by CS (or a Sales) process. At minimum, the Device Location (ES65) and the Device Category (Material) needs to be provided for.
2. A techniciation executes the Work Order to install the meter. After which, this work is confirmed (IW42) and a Goods Issue is done on installed Device. In our case, the technician decides actual Device Number based on his/her vehicle stock.
3. Now, we want execute the IS-U Device Installation (EG31). However, we don't know where to draw the IS-U Installation from. There is no IS-U specific reference on the Work Order for the Installation. (It would be nice if the Order Type had an IS-U releavant screen category (table TQBT) for such a reference).
We could create the Installation on the fly, but we need the IS-U Premise (ES60). Our expection, anyway, is to build IS-U data
prior to the Work Order execution as part of the CS process. We defer IS-U Installation only because the device number is determined at the time of installation.
How should the IS-U context data passed around in the Work Order?
Thanks, Ed

Hi Reddy
Thanks for your reply, but the note says that only applies for India or Brazil legal purposes.
In my case I still have confuse, in a normal Sales scenario CRM to R/3 how to works the determination of the delivery plant.
I know that in R/3 is determined by:
1. Customer-Material info record (Sales Area data)
2. Customer Master data (Sales area data)
3. Material Master data (Sales-area data)
I can think that in CRM is determinate bye Material Master Data, but I still don't know if I can change
it?? and where in the crm sales order before it is download to R/3??
Thanks
Sussie

Similar Messages

How to determine the status of Maintenance Order while working in workflow

Hello Experts,
I am working on a workflow to release production related maintenance order.In this workflow I need to determine the status of the Maintenance Order (BOR object BUS2007) whether it has been released or not.I am trying to do this by condition step type.I can't understand which field of BUS2007 object I need to check to know the status of the maintenance order.
Can somebody help please?
Regards,
Manas

Hi,
Have you not getting any value in Status Profile attribute.
For new attribute u need to write coding, getting the value of that released field.
First, u need to implement by going to Edit->Change Release Status ->To implemented.
Then check your BO and generate it. If any error occurs in Menu bar Goto->Error List and see what is the error.
After generation of your BO, test your BO.
If test works fine, then Delegate with the standard BO.
To delegate, u need to be in initial screen of SWO1 and goto Settings->Delegate. Give Super type as Std BO and delegate type as your custom BO and use the Std BO in your workflow.

How to update the inventory after committing order..?

How to update the Inventory stock level of a commerce item after committing the order.. in ATG 10.0.1..?
Thanks in Advance,
Vishnu & Nithin Kayithi

you can add the pipeline chain after the processOrder in the commerce pipeline , in the runProcess method call InventoryManager.decreaseStockLevel(String pId, long pNumber);

How to make the recovery after a windows installation

Please I have a toshiba satellite m645 and I already can see the hdd partition but the problem is how to make it run. I just tried pressing F11 and nothing happens.
The problem is that I made a new installation of windows 7 but I didn't delete the hdd partition.
Someone who help me i will really apreciate
Thank you

se37 > clear the field of the function module name
menu path: Function module > test > test sequence and give you FM's sequence you want to test

Smartform how to determine the language of apurchase order.

Hi,
Maybe a simple question. But i cannot find it in my form because it isn't used in it so far.
A purchase order must be printed in the language of the receiver of the purchase (vendor).
Which variable is used to detemine in which language these form text has to be printed.
(it is not sy-langu).
Gr., Frank

No, just the first one
SSFCTRLOP-LANGU
and well it wont be filled, YOU gotta fill it.
Since you want to print out something, you probably have an output type (Nachricht) which is beeing processed.
Language of output type (NAST-SPRAS) is normally drawn from communication language of customer.
So what you need to do is:
data: ls_controls                type SSFCTRLOP.
ls_controls-langu = nast-spras.
CALL FUNCTION lv_formname
    EXPORTING
*     ARCHIVE_INDEX              =
*     ARCHIVE_INDEX_TAB          =
*     ARCHIVE_PARAMETERS         =
*     CONTROL_PARAMETERS         = ls_controls
*     MAIL_APPL_OBJ              =
*     MAIL_RECIPIENT             =
*     MAIL_SENDER                =
*     OUTPUT_OPTIONS             =
*     USER_SETTINGS              = 'X'
      gt_header                  = gt_header
      gt_items                   = gt_items
*   IMPORTING
*     DOCUMENT_OUTPUT_INFO       =
*     JOB_OUTPUT_INFO            =
*     JOB_OUTPUT_OPTIONS         =
    EXCEPTIONS
      formatting_error           = 1
      internal_error             = 2
      send_error                 = 3
      user_canceled              = 4
      OTHERS                     = 5.

I reset my iphone 3gs bt have no backup. how to i get it to working order again because its now displaying the apple logo only

i reset my iphone 3gs bt have no backup. how to i get it to working order again because its now displaying the apple logo only

http://support.apple.com/kb/HT1808

How to determine the ROWNUM in a Master Detail Form

Hello,
I am working in a Master Detail Form with Orders and Order Items Information; and I created a process that allows the users to select a Product ID on a tabular form, and the next column is populated automatically with the Product Description.
To achieve that, I followed some instructions by Denes Kubicek (http://apex.oracle.com/pls/otn/f?p=31517:241), but my case is slightly different:
<ul>I am using a wizard-created tabular form, instead of a manual tabular form; and </ul>
<ul>Instead of using another page as a Popup to pass the parameter of the ROWNUM, I am using a plug-in called “Tabular Form Super LOV” which is a modified version of the SkillBuilders’ Super LOV that works on Tabular Forms. </ul>
The Product ID is returned in the correct row by the plug-in; but in the case of the Product Description, it is always returned into the first row; and my problem is that I don't know how to determine the row where the user clicked to call the plug-in.
I set up an example in apex.oracle.com in case someone would like to look at it:
Workspace: ediazjorge
Username: test
Password: test
App Name: Sample App
App Number: 1550
BTW, I am using Apex 4.1.1.00.23 and Oracle DB 10.3.2.
Thanks in advance,
Erick

Hello VC,
Thank you for your time and help.
Unfortunately, it is still not working properly:
1. When the Popup LOV opens, the first row of the tabular form is 0, the second row is 1, and so on. How can I assign the values starting with 1 and in the format *0001* ? (I am still a novice on Apex and new to JavaScript :-), sorry about that).
--2. Also, when I close the Popup LOV, the value of P1_ROWNUM is ‘undefined’ again so I'm not sure if the Product Name column will be populated.--
3. And finally, you are using the jQuery Selector uPopupLOVIcon, which is an attribute of the Cloudy Theme. In my real application (Apex 4.1.1.00.26), my element looks like: *<img src="/i/lov_16x16.gif" width="16" height="16" alt="Popup Lov" alt="List" style="vertical-align:middle;" align="middle" />*. What do you recommend me to use as a jQuery Selector?
Again, I really appreciate your help and time. I think you solved the most difficult part.
Thank you so much,
Erick
Update: I just found out that the problem with my comment 2 is because I didn’t delete the previous dynamic action that set the value to P1_ROWNUM.
Edited by: ediazjorge on Sep 18, 2012 11:20 AM

How to determine the solution's ID in absl?

Hello Community,
I have a simple question yet I fear there is no simple answer (possibly no answer at all).
The question is:
Does any body know ways how to determine the ID (e.g. Y123ABCDY_) of the solution the code is running in?
My use case is the following:
We have a solution template which will be deployed in different customer tenant.
Thus, each deployment will have a different solution ID.
Now, somewhere in code, we generat PDFs using the OutputManagementUtilities.GetPDF reuse library.
This method requires the form template code of the pdf to be generated as a parameter.
However, this PDF form template code is composed of the solution ID and a fixed suffix.
Thus, currently I need to modify the absl code in each customer installation to manually modify the form template code prefix to the solutions solution ID.
Therefore I'd like to construct the form template code in absl but for this I need a way to determine the solution's ID.
Any ideas?
Best regards,
Ludger

Hi Fernando.
After reading your post I initially thought "what is the ObjectTypeCode" supposed to do any good to determine the solution ID"?
Using the Object Type code of a custom bo is indeed a way to solve this problem.
With a little additional code I can extract the relevant solution ID part from there.
Thanks for the hint, that was really useful.
Best reegards,
Ludger

How to determine the download media required from my License key?

Hi
After recently rebuilding a dead PC, The user has advised me she used to use Illustrator.
Unfortunately the user does not have the install media available.
Support advised my license key is a volume license for Design Standard.
I have downloaded Design Standard (Universal) but the Licence key is not accepted.
Can anyone advise how to determine the correct download based on my License key?
Many thanks

Some times you may need to sign in to volume licensing account and download
refer
Adobe Licensing Website | Serial numbers | Orders | Accounts

EEWB : how to determine the business object and the extension type ?

Hi,
I ask myself how to determine the business object and the extension type to use to add new fields in a new tab of a specific transaction ? what means each business object, does that correspond to a specific transaction ?
I need to add a new tab in the BaMI business activity in transaction CRMD_ORDER just after the tab 'Actions' at header level.
Could you help me please to determine which business object and extension type I have to select during creation of the project and which business object category I have to select during creation of the extension (wizard) ?
Thanks for your help,
Marie

Marie,
In order to determine what type of transaction you are extending, you will need to look at the customizing for the transaction.
In the IMG:
Goto:
Customer Relationship Management->Transactions->Basic Settings->Define Transaction Types.
You will then choose the transaction defined that you want to extend. If you display the details of the transaction you will find an attribute called:
"Leading Transaction Category". This tells you the general context in which the transaction is used. The other item to view is the assignment of business transaction categories found in the maintenance screen.
This information general corresponds to one of the options that the EEWB will give you on the transaction type.
As far as extensions go, my recommendation is the following:
- Use CUSTOMER_H Customer Header Extensions for any new fields at the header level.
- Use CUSTOMER_I Customer Item Extensions for any new fields at the item level.
Unless you have a specific requirement to extend a segment of the transaction, I recommend placing all new fields in these segments. The CUSTOMER_H & CUSTOMER_I segments are considered "standard" segments, that are already built into all the necessary API structures.
Let me know if you have any further questions.
Good luck,
Stephen

How to determine Oracle_Home default from multiple home installation?

Does anyone know how to determine the current Oracle Home default in the registry when multiple Oracle Home exists?
Both 8i and multiple 9i Version X's exist on a client machine. We need to determine the current default oracle home to determine path for various drivers.
In analyzing the Oracle Home registry keys I have been unable to find a means for identifying the current Oracle Home default.

Thank you for you reply, your advice is good. Unfortunately our application has to deal with all kinds of Oracle configurations and one of those is the multi-home issue. We have looked throughout the registry particular in the HKLM\SOFTWARE\ORACLE|ALL_HOMES\
but have not found any entry that would indicate a default home. One two different system installation of multiple client installations there is no DEFAULT_HOME. We do have the HOME0, HOME1, ... HOME4 but, these are just sequencial based on when they where installed not on the order of preference or any default setting. Problem is our application needs to know the default home to locate the appropriate drives to use and appropriate connects service to look-up(tnsname) also.
Thanks.

How to arrange the information in alphabetical order in a listbox?

Can you guys help me out?
How to arrange the information in alphabetical order in a listbox?
*The information is taken from a text file using FileReader
Thanks

private void jbInit() throws Exception {
// Get information for the text file
File f1 = new File("Albums.txt");
try {
FileReader fr = new FileReader(f1);
BufferedReader br = new BufferedReader(fr);
//Use a loop to read
for (String str = br.readLine();
str != null;
str = br.readLine())
jListModel.addElement(str);
//Closing the file
fr.close();
catch (Exception ex) {
JOptionPane.showMessageDialog(this, "Error Retriving File", "error",
JOptionPane.ERROR_MESSAGE);
Can you explain to me how to use the Collection class? Above codes is getting the data from my text file and put it into my ListBox(jModelList)... So after inputting the text into it.. how do i arrange it using the Collection?
Thanks

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

How to determine the mount point for directory /tmp ?

Folks,
Hello. I am installing Oracle 11gR2 RAC using 2 Virtual Machines (rac1 and rac2 whose OS are Oracle Linux 5.6) in VMPlayer and according to the tutorial
http://appsdbaworkshop.blogspot.com/2011/10/11gr2-rac-on-linux-56-using-vmware.html
I am installing Grid infrastructure. I am on step 7 of 10 (verify Grid installation enviroment) and get this error:
"Free Space: Rac2: /tmp"
Cause: Could not determine mount point for location specified.
Action: Ensure location specified is available.
Expected value: n/a
Actual value: n/a
I have checked the free space using the command:
[root@Rac2 /]# df -k /tmp
Output:
Filesystem 1k-blocks used Available Use% Mounted on
/dev/sda1 30470144 7826952 21070432 28% /
As you see above, the free space is enough, but could not determine mount point for /tmp.
Do any folk understand how to determine the mount point for directory /tmp ?
Thanks.

I have just checked "/home/oracle/.bash_profile". But in my computer, there is no "oracle" under /home directory.Is this your first time Linux and Oracle installation? I had a brief look at your referenced link. The reason why you do not find a "oracle" user is because the instructions use "ora11g" instead, which, btw, is not standard. The directories of your installation and your installation source can be somewhat different from known standards and you will have to adjust it to your system.
My best guess is that you have either missed something in the instructions or you need to ask the author of the blog what is wrong. The chance to find someone here who has experience with these custom instructions is probably unlikely.
I suggest you try to locate the cluster verification tool, which should be in the bin directory of your grid installation. Alternatively you might want to check the RAC, ASM & Clusterware Installation forum: RAC, ASM & Clusterware Installation

How to determine the maximum allowable length of a filename for Window ?

Hi all,
Could I know how to determine the allowable file length (the length of the absolute path) for a file in Window environment?
Due to some reason, I generated a zip file with a very long filename ( > 170) and put in a folder(the length of the folder path around 90). The length of the absolute path is around 260.
I used FileOutputStream with the ZipOutputStream to write out the zip file. Everything is working fine while i generating the zip file.
However, while i try to extract some files from the zip file i just created, i encountered the error
java.util.zip.ZipException The filename is too long.
I am using the class ZipFile to extract the files from the zip file like the following
String absPath = "A very long filepath which exceed 260";
ZipFile zipF = new ZipFile(absPath); //<-- here is the root causeIs it possible to pre-determine the maximum allowable filepath length prior i generate the zip file ? This is weird since i got no error while i created the zip file, but have problem in extracting the zip file ......
Thanks

Assuming you could determine the max, what would you do about it? I'd say you should just assume it will be successful, but accommodate (handle) the possible exception gracefully. Either way you're going to have to handle it as an "exception", whether you "catch" an actual "Exception" object and deal with that, or manually deal with the length exceeding the max.

How to determine the Installation after Work Order installs a new meter

Similar Messages

Maybe you are looking for