How to give valid period for tcodes

Hi all,
i have a question how to give a valid period for tcodes.
Thanks&regards,
rani.

You can't.
You can set validity dates for roles - you do this in the roles section of the user master record
If you need a t-code to be locked for <b>everyone</b> for certain periods then you can look into a custom prog that uses tx SM01, though it usually is not a worthwhile control to mitigate the particular risk.

Similar Messages

How to give validity period for tax codes

In fv12 menu the validity period in display mode how to change and give validity period for a tax code

in fv12 you can change the validity period and for the new validity period maintain another record in fv12
Validity from and to by changing the old validity period upto when that is applicable

How to define validity period for tax codes

In Fv12 the validity period is in display mode , how to change the validity period ? Will affect the tax codes or the changes remain for condition records.

Hi
You can use t-code FTXP,
Check the menu option in the main transaction menu for tax rate periods
Regards
Sach!n

How to change validity period of cost centre or activity type

Hi
How to change validity period for an Activity type or Cost centre?
Can we change the validity period once created?
regards
Prakash

Please note this can be done.
Go to Edit Cost Center
Goto Edit, Analysis Period.
Create a new validity period say today until 3112999
Change the data you want and save.
When you go into the CC again it will show two validity periods.

How to give user authorizations for a Program or an ICF service

Hi,
1)How to give user authorizations for a report program or an ICF service.
2)How to create an user authorization object.
Regards,
Vinay.

check this online help for more info on authorization object creation
http://help.sap.com/saphelp_nw04/helpdata/en/52/67168c439b11d1896f0000e8322d00/frameset.htm
for question no1.
ICF - you either maintain the auth obj relevant at the icf service level itself or you can code call authority object and block access
for abap programs:
you maintain auth object at the tcode or code the call authority object within the program
Regards
Raja

Date Range Validity periods for Addresses

Hello,
In the BP transaction when entering address details I cannot see a place to enter a validity period for the address even though in BUT020 there are database fields on this table to store a To and From date for and address.
Does anyone know how to make these date field available for entry?
Many thanks in advance.
David

Thanks.
When I go to this in SPRO I can see the field 'BP Address: Time-Dependent Usages' for the role I need to change.
However when I make this field 'optional' is still does not appear.
If I select optional on some other fields e.g. 'Address-Indep.Communication Data: Mobile Telephone' this field appears.
Is there anything else I need to do to make this field appear?
Regards
David

How to give error message for the screen element text field when wrong i/p

How to give error message for the screen element text field when wrong i/p
when wrong input given
eg.
I have a text box with SBOOK-CARRID
so when user give wrong entry in text box i.e LG
then I should give some error stating that the the input is invalid or not available ,
now it showing the error of standard messages,
i want manual message to be displayed when error comes.
Thank you,
Regards,
Jagrut Bharatkumar Shukla

Hi all,
Thank you for your valuable reply,
but the thing is that its a screen field,
i.e text box not a selection screen
i created in screen layout
with name sbook-carrid
now i want to get error message display if wrong i/p is given
thank you.
Regards,
Jagrut bharatkumar Shukla,

Validation check for Tcode FB10 and FB60 - FICO.

I have an issue in validation check for Tcode 'FB60' and 'FB10'.
there are two exits coded for these transactions through transaction 'GGB0'.
details for the two exits.
exit 1.
when posting a vendor invoice, the network status is checked whether it is completed or not - if status is completed error message is raised.
exit 2.
when posting vendor invoice - for G/L Account in 60000 - 69999 series network should not be posted. if posted error message is raised.
when these two exits are entered via a prerequisites in code 'KGB' a code is generated automatically to call these exits- when transaction 'FB10' 'FB60' is executed.
Issue:
for code 'FB10' is executed with network with status completed and with G/LP account in 60000 - 69999 series -
error message is raised in sequence i.e. exit 1 is raised and then exit 2 is raised.
but for code 'FB60' if condition for exit 2 is not satisfied then exit 1 message is raised.
but it should be in sequence in raising the error message i.e. exit 1 and then exit.
Even though for both the transaction the auto generated code is similar and even exits are similar - but it is execution in raising the error message is diffrent.
- Since it is auto generated code i am able to figure out the issue.
i would appreciate if any one could help me out in this issue.
thank you,
with dregs,
Karthik.

Hi,
I have tried what you have suggested. But still validation is not working
I have done the following validation based on your inputs.
Prerequisite
Company Code = '1265' AND Transaction code = 'FB60' AND
Account Type = 'K' OR
Transaction code = 'F-43' AND Account Type = 'K' OR
Transaction code = 'F-48' AND Account Type = 'K'
Check
Business Place > '' AND Business Place = Section Code
Message
E - Error Message
Still it is not working.
Please suggest.
Best Regards
Shashikanth.M

Validity period for Mediclaim on ESS

Hi All,
I am facing following problem in case of Claims:
For medical claim in table V_T7INAA i have maintained 1 year.
When i execute PC00_M40_REMS report here i am getting correct validity period for mediclaim from 01.04.2010 to 31.03.2011
but when employee log into ESS validity period is appearing as 01.04.2010 to 31.03.2012
I have checked all the settings in R/3. I do not understand from wher this 31.03.2012 date is coming cause ESS will fetch data from R/3 and in R/3 everything seems to be correct.
Thanks & Regards,
Neha

Hi,
Wel no we have not implemented any exit. we using standard settings only.
I am clueless from wher its picking up these changed dates. Cause on R/3 dates are appearing perfectly fine.
Neha Desai

How to give Value set for model attribute?

Hi all,
How to give value set for model attribute?
plz explain me with some sample code.
Regards,
Srinu

Hi Srinivasulu,
An attribute (of basic data types like integer , string etc) holds a single values.
Please clarify by what you mean value set ?
Also, share the structure of context.
Regards,
Kartikaye

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT

HOW TO GIVE EXTERNAL NUMBER FOR ORG UNIT
Regards,
Kumar

HAI..
External number assignment
If you want the user to assign the numbers, enter "EX" in the 'NR' field. The number ranges are then indicated by the letters "EX".
Number assignment for plan version 10 / object type S: Subgroup 10S

Validity period for services in ITS

We are on Extended classic scenario with EBO 4.0 and wanted to have service order created.
When I log into ITS server
Shop -> Describe Requirement ->
I have Description, Internal Note, Quantity, Price, Category and Required on.
However I want "From date" and "To date" instead of just Required on date
Is there any configuration setting that needs to be enabled to have validity period for services.
Any help would be highly appreciated.

Hi,
This is strange!At my place,I can see the foll fields when i goto DESCRIBE REQUIREMENT "link:
Describe Requirement
You can describe your requirement if you are unable to find it in the catalog.
Product Type Goods Services
Description
Internal Note
Quantity
Price
Category
Required BetweenOnFrom -
Pls check whether any BADI(like BBP_SC_UI_CTRL/BBP_SC_MODIFY_UI ) has been implemented to modify this screen in you system.
See these related notes:
Note 976533 - Changing the "Required on"/"Start Date" in shopping cart
Note 1064560 - Disabling Service Button causes change in Label/header.
Note 948473 - Change field labels on 'Describe Requirement' screen
BR,
Disha.

Validity periods for Item Conditions - Purchasing Agreements

hi,
For Agreements (Purchasing) we are looking for creating multiple validity periods for item conditions. We cannot use BTCI for transaction ME31K as it does not allow to create multiple validity periods at one time!
Are there any BAPIs for the same? Is there any other way??
Thanks in advance.
regards,
NB

Hi
Working with eCATT (Extended Computer Aided Test Tool)
Try this.
http://www.erpgenie.com/ecatt/
Thanks
Ashok

How can i open period for specific user in OB52.

Hi Expert,
How can i open period for specific user in OB52. As 'Authorisation Group' field is there in OB52, how can i use this field to restrict the specific user to post for particular period. How can i creat authorisation group and where can i assign it to the particular user...
Please let me know?
Thanks and regards,
Sam.

Hi,
Here is the detailed process as outlined in SAP help.
Procedure
If only a limited set of users is to be able to post in a particular posting period, proceed as follows:
Add the posting period authorization (authorization object F_BKPF_BUP) to the authorizations of the selected users. Assign an authorization group (e.g. '0001').
Enter the account type '+' for the posting period variant to which the restriction is to apply. Enter the period(s) whose use is to be restricted in the first period, those which are available to all users in the second period, and the authorization group (e.g. '0001') in the last column.
Examples
A posting period can be successively restricted. If, e.g. 10 users have the posting period authorization with authorization group '0001', and 3 of these 10 users also with authorization group '0002'.
If the period is only to be accessible to the 10 selected users the authorization group '0001' is entered in the posting period variant. Access can later be restricted to the remaining 3 users by entering '0002'.
Thanks
Venkata Ganesh Perumalla

Validity Period for BP relationships

Hello Experts,
We are having a problem with the validity date in BP relationship. Our partner functions get replicated from ECC to CRM. However, if one of the partner function detail changes, the relationship come up with two values for the same partner function which is correct but both show the same validity to and from date.
For eg if we have the payer XYZ for the sold to ABC from validity period 2008 to 2009 and the payer changed to EFG from 2009 to 9999, the relationship tab shows both the payer valid from 01.01.01 to 01.01.9999.
The system then fails to determine the correct payer if an order comes through from MSA and stops with an error in CRM which then has to be processed manually.
How can this problem be resolved so that the validity period comes up with the correct dates and the system can automatically pick up the correct partners?
PT

Hi,
Please go to transaction BUBN and in that one field group would be there called 'Relationship Category/Role Definition Category'.
Select that and go to "Field Group--> Fields" and add the following two fields:
Table                        FieldName
BUS050DFLD           DATE_FROM_STR
BUS050DFLD           DATE_TO_STR
Dont check any of the check boxes like "input field" and "not a required field".
Save it and come out and then again launch BP trx to get the desired result.
This is how i solved my problem in CRM 4.0.
Please let me know if you have problems.
Regards
Sidd

How to give valid period for tcodes

Similar Messages

Maybe you are looking for