How to go from the output data to a standard t code

Hi ,
I have created an alv report .
The fields of output are :
vendor num I cocode I PO number .
0011 2001 450003201
I want that when i double click on PO num 450003201 , then the standard screen of ME23n conatined the data of this PO number should be open .
Kindly advice , how is this possible .
Thanks
Sheetal

Hi,
Have a look at tthe code,
form user_command using p_ucomm type sy-ucomm
                        rs_selfield type slis_selfield.
data : vbeln type vbeln_va.
case p_ucomm.
    when 'BACK'.
      leave program.
    when '&IC1'.
      clear : vbeln.
      vbeln = rs_selfield-value.
      set parameter id: 'AUN' field vbeln.
      call transaction 'VA03' and skip first screen.
endcase.
In user command, write the above code as per ur po number.
for me23n , for po number,
parameter id is BES
reward if helpful.
regards,
Pritha.

Similar Messages

How we can populate the form data from 2D barcode

Hi All,
Can anyone tell me how we can populate the form data from 2D barcode, will this can be done through script(javascript)?.
Thanks & Regards,
Faisal Afzal

I was hoping someone could put me in the right direction here. I am basically doing the same . I am decodeing the information stored in a 2D Bar code and sending this information to an XML file, then I am trying to combine that xml file with a blank PDF template but the process is failing beacuse there are some additional tag fields the XML data from the Decode->Extract XML process.
The XML file from the decode process gives the structure below..notice therer some extra tags (lines 2- 4)
<?xml version="1.0" encoding="UTF-8"?>
<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<form1>
The XML structure that is expected by the PDF template is as follows
<?xml version="1.0" encoding="UTF-8"?>
<form1>
So the xml output of the Decode barcode + Extract XML process has three extra lines of tag. Is there a way I could use a process within liveCycle to clean out those three lines in real-time before sending the xml to be recombined with the PDF template.
Thanks

How can I restore the game data from an old ipod touch to a new one?

How can I restore the game data from an old ipod touch to a new one?

Restore it from the backup of the old ipod.

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date is created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?

The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD

My old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

my old emails and documents are not showing up in email or finder both from the same date and I cannot find them anywhere. I do not believe I have any archive settings on. Any idea how I get them to show up?

Hello gpbondi,
The following article provdies step-by-step instructions for downloading your purchases both in iTunes and on your devices.
Download past purchases
http://support.apple.com/kb/HT2519
Cheers,
Allen

I'm moving an internal hard drive from an old computer to a new computer. How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer?

I'm moving an internal hard drive from an old computer to a new computer. (My new compute runs Windows 8.1) How do I transfer the catalog data to my new computer so the Organizer of Photoshop Elements 6 will find the data on the hard that has been moved to the new computer? Is this possible or do I have to use the procedure of copying the catalog along with the photos to a back up hard drive and then restore them on the new computer?

The 'normal' procedure is to do a PSE organizer backup (not a copy or a backup from external tools) to an external drive, then a restore to the new location.
The advantage is that you have a backup of both catalog and media files and you don't have all disconnected files, which would happen with external backup tools. Also, if you restore with a more recent elements version, the catalog will be automatically updated to the new format.
The drawback in your situation is that you'll have either to overwrite all your files or restore to a custom location, creating a duplicate photo library (which supposes you have enough free space).
It would be possible to simply use the organizer in the old PC to move the catalog to a new 'custom' folder just under your C: root drive. The catalog would be accessible once the drive will be installed in the new PC. Then you would have all files 'disconnected' due to the fact that all your media files are now on a drive with a different letter. Reconnecting a whole library is a hard job with PSE6, less so with PSE11/PSE12.
If the idea of fiddling with the sqlite database with external sqlite manager tools is ok for you, I can describe the process more in detail. You only copy your catalog folder (as suggested above) to another location. Instead of trying the 'reconnection' way, you install the sqlite utility on the new computer. When the old drive is installed in the new computer, you simply edit a given record in the catalog database, catalog.psedb, and start the organizer with your copied catalog by simply double clicking the 'catalog.psedb' file.
Even if the last solution is much, much quicker, I would still create a new PSE backup : you have never too much safety .

How to remove namespace link from the output XML

i have to remove 'xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions"' (namespace) from the output xml file which is generated from the BIP. I need my output XML file without that namespace link, this namespace link is coming for each element.
Anybody know how to do that please help.
output xml file
<?xml version="1.0" encoding="UTF-8" ?>
<Reports version="2.00">
<deliveryNote xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<subjectId />
</deliveryNote>
<deliveredReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<referDate>[Delivery note->H4]</referDate>
</deliveredReports>
<simpleReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<numberOfReports>2</numberOfReports>
<nReport>
<reportName>Xyz</reportName>
<reportVersion>1.0</reportVersion>
<observations>
<numberOfObservations>15</numberOfObservations>
<columnObservation>
<y>9</y>
<rO>
<x>14</x>
<o>11</o>
<o>21</o>
<o>121</o>
</rO>
</columnObservation>
</observations>
</nReport>
</simpleReports>
</Reports>
my xslt file
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions" >
<xsl:output method="xml" encoding="UTF-8"/>
<xsl:template match="/">
     <xsl:element name="Reports">
          <xsl:attribute name="version">2.00</xsl:attribute>
               <deliveryNote>
                    <subjectId></subjectId>
                    </deliveryNote>
               <deliveredReports>
                    <referDate>[Delivery note->H4]</referDate>
               </deliveredReports>
               <simpleReports>
                    <numberOfReports>2</numberOfReports>
                    <nReport>
                              <reportName>Xyz</reportName>
                              <reportVersion>1.0</reportVersion>
                                   <observations>
                                   <numberOfObservations>15</numberOfObservations>
                                   <columnObservation>
                                        <y>9</y>
                                        <rO>
                                             <x>14</x>
                                                  <xsl:for-each select="TEST_XML/LIST_R1/R1">
                                                       <o><xsl:value-of select="xdoxslt:lpad(COL1,10,' ')"/></o>
                                                  </xsl:for-each>
                                        </rO>
                                   </columnObservation>
                                   </observations>
                         </nReport>
                    </simpleReports>
          </xsl:element>
</xsl:template>
</xsl:stylesheet>

Please post the same in BI Publisher forum
BI Publisher
Thanks,
Vino

How do I change the start date for the week from Monday to Sunday on my iPhone 5?

How do I change the start date for the week on iCal from Monday to Sunday on my iPhone5?

Yes. On my new iPhone 5 the iCal week begins on a Monday not a Sunday and does not give me the option to edit in settings on the phone

How to create new documet from the output of another document automatically

Hi all
here is the scenario, If we are creating an debit memo request and debit memo to a customer, from the output of this debit memo we need to trigger the creation of another document( Ex credit memo to another customer) automatically, how we can do this?

Hi Dev,
You need to create another report program for the other document along with the smartform.
In the report program, you have to put your logic on how the other document has to be found when your document is created and the output be triggered.
So in principle,
There will be two programs linked to your output type.
One will create the output of the document which is being created,
Another program will automatically call the other target document in change mode and trigger the same output, during which the second program will be executed.
Now the second program will create the output for the second document.
Making copy controls wont help for this reqmt.
Reward points if it helps.

How can i get the meta data from database?

Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hanna

if i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor?

How can I check the expiration date of a Certificate Keychain from terminal?

Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
Any recommendations would be appreciated.
Thank you!

Anyone?

How to get the output data of Standard drill down report into z-program?

HI every one,
        I want to get the output data of drill down report into z-program.
       Actually,if the output is only one, I can get into z-program,
      But, Here the report consists 3 alv outputs. when double clicking function happens, it will direct to another alv output.
    Those, all the outputs of report i want to get into z-program.
PLease , give reply as early as possible.
Thank u in advance,
karthik

HI,
When i download,only one output i will get.
But,if i double-click the particular record it will show another output. I want that output also.
Like that,when i double-click particular record, it will show some other alv ouput based on record,
i wanted all those outputs.
If i copy the code, whether i face any problems?

Creation of a new document from the output of another document.

Hi all
here is the scenario, If we are creating an debit memo request and debit memo to a customer, from the output of this debit memo we need to trigger the creation of another document( Ex credit memo to other customer) automatically, how we can do this?

Hi,
There is a simple solution provided by SAP to trigger the BILLING DOCUMENTS for Deliveries
This is a standard process
Setup a Job in SM36 for the program SDBILLDL and it will pick all the delivery document which are open on that particular Billing date
and process the Billing documents
Alternatively you can also create the IDOC to trigger the BILLING DOCUMENTS
For which you need to setup the PARTNER PROFILES, MESSAGE TYPES, PORT, RFC DESTINATION, SEGMENT CREATION,
But i would suggest you to go with the standard program to create the Billing documents
regards,
santosh

Regarding subtraction of 10 days from the current date

Need to know how I can get 10 days subtracted from the current date before the report is excuted. This needs to appear in the selection screen before the report is excuted.
The select option contains two fields the first field is the date which is 10 days subtracted from the current date and the next field is the current date.
Please suggest.
Thanks.

Hi Dolly
I had a same req before check that code:
AT SELECTION-SCREEN OUTPUT.
IF pa_older = 'X'.
CALL FUNCTION 'RP_CALC_DATE_IN_INTERVAL'
EXPORTING
date = pa_end "<<<<< date or in ur case sy-datum
days = '10'
months = '00'
signum = '-'
years = '00'
IMPORTING
calc_date = pa_end1. " <<< subtracted date
ENDIF.

How to find out the "manufacture date"?

Hello!
Can you tell me how to find out the manufacture date of my Satellite A110-334 with the serial "SY6224123K"?
I need this information for my insurance!
I found only this link for HDD`s: http://www.storage.toshiba.eu/index_manual.php?pid=220&sid=536&la=en
But there is no "S" on the first digit!??
So it is maybe "Y6" which can be November 2006! Is this right?
Thank you!
===========
This is the information on the link above:
How to encode a Toshiba Hard Disk Drive Serial Number?
The Toshiba serial number (S/N) includes details of the date of manufacture. The first digit of the serial number indicates the Month of manufacture and the 2nd digit indicates the Year.
Example:
M Y x x x x x x x
M = Month
Y = Year
The month digit goes from 1, for January, through to 9, for September, and then X, Y and Z, for October, November and December.
Examples:
2 8 1 7 0 0 0 1 A
2 = February
8 = 1998
3 0 5 4 4 3 0 6 T
3 = March
0 = 2000
X 9 D 7 8 3 3 1 T
X = October
9 = 1999
The remaining digits contain information about factory and production line, and some digits are reserved for a continuously running serial number.

Hello
Try with http://gedb.toshiba.com/
Let me know if you find info you need.

How to go from the output data to a standard t code

Similar Messages

Maybe you are looking for