How to grant access to a Oracle Report Program
Hi hussein,
I am checking/debugging our clients registered customized report program setup.
I want to grant the program to my ID so I can test print and see its output.
The steps I followed are the ff:
A.
System Administrator resp: Concurrent Program > Executable :
Executable : CEC2CREC
Application : ABC Customizations
Execution Method : Oracle Reports
Execution File Name: CEC2CREC
B.
System Administrator resp: Concurrent Program > Define :
Program : Bank Reconciliation Report ( 2 Column )
Short Name : CEC2CREC
Application : ABC Customizations
Executsble Method : Oracle Reports
Executable Name : CEC2CREC
I want to grant this program "Bank Reconciliation Report ( 2 Column )" to my USERID.
I followed these steps:
- Login to System Administrator responsibility
- Navigate to Security > Responsibility > Define
- Query the "ABC Customization" responsibility
But I can not find any "ABC Customization" responsibility
Is there other way to test run the program?
Thanks a lot
Edited by: yxes2009 on Sep 14, 2009 3:23 AM
Hi,
System Administrator resp: Concurrent Program > Executable :
Executable : CEC2CRECApplication : ABC Customizations
But I can not find any "ABC Customization" responsibility According to the above, "ABC Customizations" is an executable file (concurrent program) and not a responsibility. From (Security > Responsibility > Define), query the responsibility which is assigned to the user, and check the "Request Group" which is attached to this responsibility, then navigate to (Security > Responsibility > Request) and add "ABC Customization" request to the request group.
Regards,
Hussein
Similar Messages
-
How to use a parameter of a report program in a dialog program
how to use a parameter of a report program in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog programHi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro -
How to use a parameter in a report program in a dialog program
how to use a parameter in a report program in a dialog program
Hi Shaikh,
Post it in http://scn.sap.com/community/abap
"ABAP Development".
sree -
How can i use bapi in my report program
hi
am new to this forum , i have doubt in bapi's how can i call bapi into my report program and what is the difference between normal function module and bapi, and bdc plz clear my doubts
Moderator message: please search for available information/documentation.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Apr 12, 2011 7:12 PMi have the same problem...
anybody can help us??
it`s urgent...
thanks -
How to use lexical paramter in oracle reports
I have a query like,
select * from t1 where &c1=:v_srep;
where t1 is tablename
c1 is column name
How do I create &c1 and how should I populate it ?
Thanks,From Oracle 8.1.5 database, we can use dynamic ref cursors.
With dynamic ref cursor we can really avoid the use of lexical parameters in Reports.
With static ref cursor this is not possible in all cases.
For example, if we need dynamic WHERE, we practically can't use static ref cursor.
But, problem is that Reports needs static ref cursor type for building Report Layout.
Solution (as i know, first published in my post in MetaLink Reports Forum,
thread "Report based on Ref Cursor or PL/SQL Table", 24-Aug-01) is:
in package specification we must have both ref cursor types,
static for Report Layout and dynamic for ref cursor query.
Dynamic ref cursor examples:
"Dynamic Table in the Second Query with Oracle Reports"
http://www.quest-pipelines.com/pipelines/plsql/tips03.htm#JULY
"Using a Collection Instead of a Temporary Table in Complex Reports"
http://www.quest-pipelines.com/pipelines/plsql/tips03.htm#NOVEMBER
Regards,
Zlatko Sirotic -
How to generate Excel files in Oracle Reports
Hi,
I've already built a JSP using oracle reports and Deploy on the report service. I also add a button to the left of the JSP.The next thing I want to do is:when user click on the button, the system will prompt a excel file contains the same content as the JSP file.
Can anybody teach me how to do? Thanks very muchHi Ni,
It may not be possible to see the output of the SAME report in Excel as well. You will have to design another report which can open in Excel. You can follow this demo:
http://otn.oracle.com/products/reports/htdocs/getstart/demonstrations/excel/index.html
Then you can add an action to your button so that it opens the new report in a new browser window. This new browser window will open MS Excel and show the report inside Excel.
The reason that you can't output the SAME report in HTML as well as MS Excel is because we use page contentType to specify the application that the browser should open the document in (the application can be MS Word, MS Excel, etc). For example,
<%@ page contentType="application/vnd.ms-excel" %>
But we can only specify one contentType for a JSP, so the report can either be viewed as HTML or inside MS Excel.
Navneet. -
How to type chinese character in Oracle Report builder 6i?
Hi,
Does anyone know how to include the chinese character in the rdf file under Oracle Report Builder 6i?Hi,
please check with this link
[https://blogs.oracle.com/ankitkaushik/entry/displaying_multilingual_data_i ]
Hope this link will help you
Thanks & Regards,
pallis -
How to connect access database through oracle sql prompt
i want to connect access database via oracle , i am trying to import all the data in Access table into oracle table how it is possible .
A.RThe simplest way, if You have already created tables in Oracle DB, is to open the Access MDB, link Oracle tables via ODBC and build a query to append rows reading from Access tables to Oracle tables.
Hope this helps
Max -
How to is lexical paramter in oracle reports
I have a query like,
select * from t1 where &c1=:v_srep;
where t1 is tablename
c1 is column name
How do I create &c1 and how should I populate it ?
Thanks,Pl see
How to use lexical paramter in oracle reports -
How to grant access to sharepoint for the user from different Domain
Hi All
I need to grant access to user from different domain.
Where I can able to view the users in people picker (different domain).
Thanks in Advance.
RajHi
Trevor Seward
Sorry to disturb
you again.
I am trying to restrict user from search from other domain, say we have domain A and Domain B, where I am trying to restrict all the user from domain B (Search users)for a site collection. I have found couple of stsadmin command to do so. but none
of them works. Below are the commands I have tried
STSADM.exe -o setproperty -pn peoplepicker-searchadforests -pv "domain:<Name>.domain" -url "http://Site URL"
stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv “(canonicalName=<Name>.domain*)” -url "Site URL"
we have two way trust.
Can you suggest any solution.
Thanks
Raj -
How to pass bind variable into oracle reports 6i - Parameter form
Hello All,
I want to pass bind variable into Oracle Reports 6I - Parameters.
I have tried out that but got the below error :-
rep-0781 : Bind variables are not allowed in the select statement
Kindly help me is there any option which allow me to pass bind variables into Oracle reports 6I.
Thanks
HARSH SHAHHi,
may be its not possible to use :P_PARAM1 in user parameter of oracle 6i reports
but u can full fill user requirement using oracle forms
create a form as like as report parameter window
then create parameter list and run report
PROCEDURE Run_Emp_Report IS
pl_id ParamList;
BEGIN
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
Run_Product(REPORTS, 'empreport', SYNCHRONOUS, RUNTIME, FILESYSTEM, pl_id, NULL);
END;
thanks
mostafiz mitul
Dhaka Bangladesh -
How to execute this statement from oracle reports
have to use the following command from oracle reports.
In oracle forms we can use the HOST command but what about oracle reports2.5.
I have to email the attached file 100245.pdf from oracle reports to the given email id
uuencode 100245.pdf 100245.pdf | mailx -s "test" [email protected]> u can execute any exe using host that host must contain a bat file
Incorrect. There is no HOST command in PL/SQL.
And please note that this is the Database » SQL and PL/SQL forum - and not the Oracle Forms or SQL*Plus forum.
Also, when using the SQL*Plus HOST command for example, you can execute any executable and not just a BAT file. SQL*Plus on Windows uses the Win32 API call CreateProcess() - and it has no limits as to what/which executable can be executed. -
How to use a parameter of a report program from selection screen in a dialog program
how to use a parameter value(entered ) of a report program from a selection screen in a dialog program.
I have to fetch the value entered in the parameter of report program and display it in a dialog programHi Aasim,
Just mention like below in your ABAP report.
PARAMETERS: p_aufnr TYPE aufnr MEMORY ID ord.
and mention the same memory ID name in the module pool screen property it automatically populates the value to and fro -
How to Link Organizational Structure to a report program
Hi All,
Can anyone pls help me out with my requirement. How can we link a organizational structure created in transaction PPOMW to a report program. Basically i want to send the report output as an XLS attachment to an external email id. For that i need to link Organizational Structure to the report program.
There are many ways of doing it but i want it to be done by linking Organization structure to the report program. Pls help me as soon as possible as its a bit urgent for me.Hi,
Please follow the below function modules and the paramters for reading archived data:
CALL FUNCTION 'ARCHIVE_OPEN_FOR_READ'
EXPORTING
OBJECT = archiving object name
IMPORTING
ARCHIVE_HANDLE = archive read handle
Then in the loop(DO-ENDDO), use this FM:
DO.
CALL FUNCTION 'ARCHIVE_GET_NEXT_OBJECT'
EXPORTING
archive_handle = archive read handle
Then records from the data objects using this FM:
CALL FUNCTION 'ARCHIVE_GET_TABLE'
EXPORTING
archive_handle = archive read handle
record_structure = 'TABLENAME'
all_records_of_object = 'X'
automatic_conversion = 'X'
TABLES
table = internal table for which you want to retrieve records.
ENDDO.
Then close the archive file using this FM:
CALL FUNCTION 'ARCHIVE_CLOSE_FILE'
EXPORTING
archive_handle = archive read handle
This will help u in reading archived data from archive file.
may give some idea also on how to code the read prgram.
Thanks,
Shamim -
How to remove the buttons coming from report program?
Hi All,
I need to remove the buttons from an iview which is a sap transaction. when i execute the report program which uses a ldb (PCH) shows a selection screen having all the buttons.
We have created variants for this.Now i want to remove the buttons which are coming from the report program.how to do this ?
Lakshmi.Goto sicf ->sap->bc->gui->sap->its->
open Webgui application
in the GUI Config enter the following parameters.
~noHeaderOkCode = 1
~webTransactionType = EWT.
All buttons can also be removed by ~webgui_simple_toolbar =0 ..
Also now open the trancsaction of the program form SE93 for which you want to hide
the Menu bar, in its properties select the EASY WEB TRANSACTION radio button.
Maybe you are looking for
-
Hi Experts, I have created char variable for ZOSO_SAELCHDT When i am saving the query it is giving this error. *Errors: VariableZOSO_SAELCHDT(0002tndgsjdthu4buc8gmtnw) does not exist or is incorrectly used 00O2TNDGSJDTHU4C2GCAV0PF0* Can anybody plz h
-
i cant get into my phone after it made me reset it to factory settings and I cant remember the password to my apple id and or my email what can do and how can I fix this ???????
-
Firefox launches and loads the 5 or 6 tabs I usually keep. Then it load them again, along with other tabs I closed long ago. And sometimes it loads them all again, so there is a string of 18 or 2o tabs when all I want is the regular 5 or 6 I usually
-
Playing a Video on 4310 firmware 5.4
Hi! I am trying to play a video on the DMP 4310 firmware 5.4. Here's my code: <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> <script language="JavaScript" src="file:///tivella/tvzilla/js/tivella.js"></script> <
-
Execute immediate a sql block of istructions
Hello, i need to to do something like this: execute immediate par; where par is a big file stored in a table that is simply a pl/sql script like this comment on table SOMETABLE.COLUMN is 'this' ; comment on table SOMETABLE.COLUMN2 is 'this' ; and so