How to grant to apps user through system user

I have created directory by loging system user but when i try to grant to apps user getting error " table or view does not exists'.

Login to system and try this.
SELECT *
  FROM dba_directories
WHERE directory_name = '<your directory name in upper case>';When it shows row then try this
GRANT READ ON DIRECTORY <dirname> TO apps;  -- optional is write....Cheers,
Manik.

Similar Messages

  • After sql server 2012 installation, I have changed sql server database engine service account from network service user to system user. What is disadvantages of this process?

         After
     sql server 2012 installation, I   attached my production db. Because of some reasons, i
     changed sql engine account from network service user to system user by means of sql server configuration manager.
         Now , there isn’t
     a problem at sql server running system.  But
    I have doubts that
     this can produce problems later. Because  sql server database engine account must have privileges that listed below;
    Log on as a service (SeServiceLogonRight)
    Replace a process-level token (SeAssignPrimaryTokenPrivilege)
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    Permission to start SQL Writer
    Permission to read the Event Log service
    Permission to read the Remote Procedure Call service
     While sql server installation, setup gives these
     privileges to network service user automatically, but changing user by means of sql confugarition manager does not give these
    privileges.
    Now, system user has privileges listed below. And sql server has been running for 1,5 months without any problems.
    Log on as a service (SeServiceLogonRight)
         Bypass traverse checking
    (SeChangeNotifyPrivilege) (Everyone user has his privileges. So i think that system user has this privilege also)
    What problems can occur because of this situation? Shall i give other privileges to system user and restart sql server or not? And how can i give these privileges to system user listed below;
    Replace a process-level token (
    this can be set from user rights assignments)
    Adjust memory quotas for a process
    (this can be set from user rights assignments)
    Permission to start SQL Writer ( 
    ? - give advice )
    Permission to read the Event Log service (
    ? - give advice )
    Permission to read the Remote Procedure Call service (
    ? - give advice )

     Our server is  windows server 2008 r2 enterprise edition. I have looked the bunch of permissions in user rights menu  that is in local security policy settings gui.
    And i have seen those permissions below were not granted to system user;
    Bypass traverse checking (SeChangeNotifyPrivilege)
    Adjust memory quotas for a process
    (SeIncreaseQuotaPrivilege)
    So, briefly you say, don't panic ?

  • In production  DB ,i wrongly imported production user to system user

    Hi All,
    1.In production DB ,i wrongly imported one user to system user.
    2.And there is any method to retrieve the system user as back?
    3.Is there any conflicts in future?
    thank you in advance,
    regards,
    Db.

    DB wrote:
    Hi All,
    1.In production DB ,i wrongly imported one user to system user.
    2.And there is any method to retrieve the system user as back?
    3.Is there any conflicts in future?
    thank you in advance,
    regards,
    Db.Yes its always better to not to import tables in SYSTEM user. So i suggest you to listout the tales which you have imported and drop those using 'DROP Table.. CASCASE' (be very carefull not to delete system's tables)
    However there is no conflict in functionality of oracle if you are not going to use.

  • SAP user licensing - service users and system users

    Hello,
    In SAP licensing process, will it count service users and system users for the license.
    (or licensing occurs only to the dialog users)
    In the license agreement , it is not mentioned.
    (Mentioned as 500 user license only)
    regards,
    zerandib.

    Hi Zerandib,
    This forum is for SAP Business One users only. I think your question is related to R/3. Please close your thread and post on a proper forum.
    Thanks,
    Gordon

  • How to grant create table privilege for a user on a specific table

    Hi:
    I created a user, for a test scenario. I granted this user create any table, and I made the default tablespace as example.
    When I connect as the user and try to create a table, I get this:
    SQL> create table T1 (NAME varchar2 (500), AGE number(2));
    create table T1 (NAME varchar2 (500), AGE number(2))
    ERROR at line 1:
    ORA-01950: no privileges on tablespace 'EXAMPLE'
    How can I grant the necessary privilege to have user create/delete tables on tablespace example?
    Thanks.
    DA

    create user ADAM identified by radge default tablespace EXAMPLE
    quota 10M on EXAMPLE;
    for example 10Mbytes given to Example tablespace.... or you can write:
    .....quota unlimited on EXAMPLE
    and
    grant connect to ADAM
    grant create table to ADAM .....
    or
    grant connect , resource to ADAM .... although grant resource is not recommended...
    ....and something else....
    you should define temporary tablespace in create user command... otherwise the system would be used...
    Greetings...
    Sim
    Message was edited by:
    sgalaxy

  • How can provider-hosted app accessible to anonymous users online

    Hi,
    I am new SharePoint and still learning it.
    I have created a Provider Hosted App. built in asp.net Web application. This apps retrieve all file to shared documents of sharepoint online using REST API. it's access only register user.
    The problem is that how can accessed this apps  through anonymous user.
    I am not sure what is the best way to do this.
    Thanks
    Krishna

    Hi Krishna,
    check those URLs
    http://www.sharepoint-journey.com/how-to-enable-anonymous-access-in-sharepoint-2013.html
    https://support.cloudshare.com/hc/en-us/articles/200701115-How-to-Enable-Anonymous-Access-to-a-SharePoint-2013-site
    Also to create the App to allow anonymous check the following link
    http://msdn.microsoft.com/en-us/library/office/dn579415(v=office.15).aspx
    Kind Regards,
    John Naguib
    Technical Consultant/Architect
    MCITP, MCPD, MCTS, MCT, TOGAF 9 Foundation
    Please remember to mark your question as answered if this solves your problem

  • APPS install as "system user" don't work

    Hi,
    I currently using ZfD3 SP1a ona Nw5.1 server.
    I want to upgrade mu client to 4.90SP2 with a Zen apps object.
    Users don't have admin rights on their workstation.
    I don't want to use DLU (except if it can be activate once!).
    Does anyone have the same issue with the system user? (secure or not
    secure give the same results!)
    Regards,
    Maurice

    [email protected] wrote:
    > Hi,
    >
    >
    > I currently using ZfD3 SP1a ona Nw5.1 server.
    > I want to upgrade mu client to 4.90SP2 with a Zen apps object.
    > Users don't have admin rights on their workstation.
    > I don't want to use DLU (except if it can be activate once!).
    >
    > Does anyone have the same issue with the system user? (secure or not
    > secure give the same results!)
    >
    > Regards,
    > Maurice
    We first do a copy of all the client files to the local workstation (to
    c:\temp\novell\client), then launch as unsecure system user from there.
    This has also the advantage that *if* something goes wrong, and network
    connectivity is lost, a helpdesk person can manually install the client
    without CD (they still carry around CD's with the 4.7 client version)
    Marcel de Roode
    Erasmus University Rotterdam

  • How to start weblogic server with non system user

    I want to start wls6.1 as an nt service with different user name other than
    system.
    Thanks
    Madhu

    I have installed weblogic server as an nt service. In install Nt service
    cmd, if I make any change in the script, I have to uninstall and install it
    again. I do not know where to specify the weblogic.management.username =(Non
    system user)
    I have created a user name in NT server and added them to Administrator
    group. I have also modified in file realm propertes i.e to boot and shutdown
    the non system user.
    I have to start weblogic server as a non system user.
    Thanks
    Madhu
    I think I replied to some of the questions when I found out the answers.
    Only thing I did was hit reply, instead of reply group. Might it went to
    persons e-mail. That might be the reason, the answers I posted is not found
    in the newsgroup
    Thanks
    freelance_code_inspector <[email protected]> wrote in message
    news:[email protected]..
    "m holur" <[email protected]> wrote in message
    news:<3bfbafce$[email protected]>...
    I want to start wls6.1 as an nt service with different user name otherthan
    system.Madhu,
    Specify weblogic.management.username={Non system user} in your -D
    option. BTW, just curious, have observed that u have been posting a
    lot of weblogic questions lately, did u find out the answers? If so, u
    should share it back to this community.
    Regards
    drit
    Freelance Java Developer/Code Inspector
    http://www.geocities.com/doc_i_t/CodeInspectionService.html

  • How to grant LOGON ONLY Rights to two users (no domain admins) on Domain Controllers

    Dear Techies,
    I wish to grant LOGON ONLY Rights to two users, who are not the members of Domain Admins, on Domain Controllers.
    Can someone please suggest the best and easiest possible way to do this keeping up with Compliance?
    Regards
    Amit Kumar

    I think it is by design, the readers don't have access to the operations and application management section. If you look at the URL's you will notice they are of the form  http://servername:portnumber/_admin/operations.aspx and http://servername:portnumber/_admin/applications.aspx. Giving read only access to these pages means, they will be not able to modify the settings on these pages.
    Looks like it is not possible to give read only access.
    Thanks,
    Prashanth

  • How to protect editable field through system user name?

    Case:
    3 editable fields.
    3 groups.
    Each field must be filled by one person of each group.
    Question:
    If the field is edited, only the person who edited the field may change it. Is this possible in an editable Acrobat document?
    Thx for helping!

    I suppose that JavaScript could do this. But there are other ways depending on your workflow.
    Is each person going to download the PDF from a central file? Will each person have full Acrobat, not Reader? If so, each person could assign a security setting to the file.
    Is it vital that one person not be able to change another's answer? Or is it just a common courtesy that you don't want that form field changed? If so, just have that person change the status of the field to read only.

  • How to move all app data from one user to another? (One mac)

    Hi. I've been having this problem for a while. So recently, I've made a new account for myself, since I was using my mom's user account. I don't want to keep all of my files, emails, and icloud on her user, since it's used by everyone in my family. I use iMail now because hotmail blocked my email because "Someone hacked me" and they kept it locked for all these months, and I can't give enough proof to show it was mine, since I forgot every email I've sent now.
    And iMail is pretty cool, adding your own rules and stuff. Except you don't need a password to log in. I just deactivate my iMail via system preferences as a log-out, and then re-activate it as a log-in.
    So, back to the question.
    How can I move ALL app data from my mom's user account to my new one? Her acount also has pictures of our germany vacation. So not every file.
    You see, I game on my mac mostly because steam is really complicated, using internet just to play a game that doesn't need internet and stuff.
    And steam doesn't have a lot of casual games.
    So I want to move my game data, save files and every little piece of application info that my games have on my mom's account to mine. I've asked this question on Yahoo answers, and all I got was an answer of "File IS data, or datum itself, You are wrong. I cannot give you an answer." -.-
    I'm not experienced with terminal either, so I'll need a ton of explanation of how to use it if that's how it can be done. It really really confuses me and I'll just give up.
    Thanks in advance.
    Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?

    Nour j wrote:
    Oh and, side question, When will OS X Mavericks be open to public and how much will it cost?
    http://www.apple.com/osx/preview/
    Will be released sometime in the fall.  Cost unknow at this time as Apple has not released this info to the public.

  • How to download an app for only one user

    I have an iMac running the latest version of lion and I want to download and app from Mac app store but I only want to download it for one user, how can I do that?

    If you wish for an app to only be available in one user account, create an Applications folder in the Home folder of that user account and drag and drop the app to that folder.

  • How to grant access to sharepoint for the user from different Domain

    Hi All
        I need to grant access to user from different domain. 
        Where I can able to view the users in people picker (different domain).
    Thanks in Advance.
    Raj

     Hi
    Trevor Seward
    Sorry to disturb
    you again.
      I am trying to restrict user from search from other domain, say we have domain A and Domain B, where I am trying to restrict all the user from domain B (Search users)for a site collection. I have found couple of stsadmin command to do so. but none
    of them works. Below are the commands I have tried
    STSADM.exe -o setproperty -pn peoplepicker-searchadforests -pv "domain:<Name>.domain" -url "http://Site URL"
    stsadm -o setproperty -pn peoplepicker-searchadcustomquery -pv “(canonicalName=<Name>.domain*)” -url "Site URL"
    we have two way trust.
    Can you suggest any solution.
    Thanks 
    Raj

  • How can I use apps downloaded by different users on the same iPad?

    I have a 'work' iPad so the apps on it have been downloaded using two different accounts. Which was fine until I did an update at the weekend and suddenly I can only use the one's I downloaded. Is there anyway of 'sharing' these apps so who logs in can use all the apps?

    No, I don't think there is. As far as I know the iPad is meant to be a 'one per Apple ID' device...and isn't really meant to have multiple Apple ID's  downloading apps to a singular device.
    I think the simplest way around your issue is to use only one Apple ID to download everything.

  • How can I see more than 100 users when adding users to a node?

    When adding new users through the User Management interface, only the
    first 100 entries are listed. How do I increase the number of entries
    so I can see the next hundred (or more) users? Is this done via the server
    configuration parameter maxsearchresult?
    <P>
    The GUI Add User to Node option was meant for infrequent adds in smaller
    environments. In large deployments (more than 100 user adds at a time), you
    should be using the command line script "unidsattach". See the Administrators
    Guide for more details on the command.
    <p>
    The parameter, maxsearchresult, is meant to limit the number of users that can
    be returned on a search request by the calendar client. For example, if you have
    1000's of calendar users and someone tries to search for all of them, this
    parameter will make sure that the user is not left waiting a long time for
    results.

    In Settings > Notification Center, try turning "on" all the six buttons under "Today View".  Also turn "on" the top two buttons under "Access on Lock Screen".  Doing that should show you "Tomorrow" at the bottom of Noticiation Center.

Maybe you are looking for

  • Material Determination error during Transaction DP90

    Dear Experts, I am configuring the Depot Repair scenario for a Hitech Industry. The Process is as follows; 1. Ceating the  Notification 2. Creating a repair order using Notificaion. and getting the repaired items in to the plant 3. Creaing and confir

  • Zen NX is not recognized by my lap

    Just for kicks I gave Pocket DivX Encoder a try. It sure is quick, and the file was definitely readable on my Zen, but I prefer to use my usual video converter, megui. The problem is all of the video files that i have made with megui weren't 'seekabl

  • Linking document info record and purchase order

    Hi all, I hope that someone can help me because I'm having a problem with creating links between document info records and purchase orders. By default in SAP I can create links between document info record and purchase order ITEMS! When I create that

  • Best Practice Question on Heartbeat Network

    After running 3.0.3 a few weeks in production, we are wondering if we set up our Heartbeat /Servers correctly. We have 2 servers in our Production Server pool. Our LAN, a 192.168.x.x network, has the Virtual IP of the Cluster (heartbeat), the 2 main

  • Boolean to String - surely there's an wasy way!

    How do i convert a boolean to its String represetation? This is how I do it: boolean primitiveBool = false; Boolean objectBool = new Boolean(primitiveBool); String booleanAsString = objectBool.toString(); Surely there is a shorter more efficient way?