How to start weblogic server with non system user

I want to start wls6.1 as an nt service with different user name other than
system.
Thanks
Madhu

I have installed weblogic server as an nt service. In install Nt service
cmd, if I make any change in the script, I have to uninstall and install it
again. I do not know where to specify the weblogic.management.username =(Non
system user)
I have created a user name in NT server and added them to Administrator
group. I have also modified in file realm propertes i.e to boot and shutdown
the non system user.
I have to start weblogic server as a non system user.
Thanks
Madhu
I think I replied to some of the questions when I found out the answers.
Only thing I did was hit reply, instead of reply group. Might it went to
persons e-mail. That might be the reason, the answers I posted is not found
in the newsgroup
Thanks
freelance_code_inspector <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3bfbafce$[email protected]>...
I want to start wls6.1 as an nt service with different user name otherthan
system.Madhu,
Specify weblogic.management.username={Non system user} in your -D
option. BTW, just curious, have observed that u have been posting a
lot of weblogic questions lately, did u find out the answers? If so, u
should share it back to this community.
Regards
drit
Freelance Java Developer/Code Inspector
http://www.geocities.com/doc_i_t/CodeInspectionService.html

Similar Messages

Starting a Weblogic server as non system user

Can we start a Weblogic server as a non system user? I didn't find any option to
pass in the user name to the startup script? Is there any undocumented parameter
to pass in the user name? The reason I am suspecting this can be done is one opf
the ACLs for weblogic.Server lists boot permissions and this would seem to indicate
whoever has boot permissions on weblogic.Server should be able to boot weblogic
server.
TIA
Hiren

[att1.html]

Is there any way to start weblogic server with java 7?

Hi. Is there any way to start weblogic server with jdk 1.7?

Hi,
You can start your Weblogic Server with java 7(JDK 1.7)
Go to Domain_home/bin and click on StartWeblogic.cmd it will start your Admin Server
It depends on which JDK you have used while creating domain if you have selected Jdk 1.7 it will use the same to start the server
See the Ex:
================
starting weblogic with Java version:
java version "1.7.0_51"
Java(TM) SE Runtime Environment (build 1.7.0_51-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.51-b03, mixed mode)
Starting WLS with line:
C:\PROGRA~1\Java\JDK17~1.0_5\bin\java -client -Xms256m -Xmx512m -XX:CompileThr
eshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=AdminServer -
Djava.security.policy=H:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy
-Xverify:none -Xverify:none -da -Dplatform.home=H:\Oracle\MIDDLE~1\WLSERV~1.3 -
Dwls.home=H:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=H:\Oracle\MIDDLE~
1\WLSERV~1.3\server -Dweblogic.management.discover=true -Dwlw.iterativeDev= -
Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=H:\Oracle\MIDDLE
~1\patch_wls1036\profiles\default\sysext_manifest_classpath weblogic.Server
<Mar 3, 2015 1:08:32 PM PST> <Info> <Security> <BEA-090905> <Disabling CryptoJ J
CE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Mar 3, 2015 1:08:33 PM PST> <Info> <Security> <BEA-090906> <Changing the defaul
t Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Mar 3, 2015 1:08:33 PM PST> <Info> <WebLogicServer> <BEA-000377> <Starting WebL
ogic Server with Java HotSpot(TM) 64-Bit Server VM Version 24.51-b03 from Oracle
Corporation>
=======================================
If you are using a Lower version of JDK and want to upgrade to JKD 1.7 you can do so by changing setDomainEnv.sh in Weblogic
Have a look at the below link to do so
The Weblogic Wasp: change java version / JDK of a weblogic domain
http://www.baigzeeshan.com/2012/05/how-to-change-jdk-used-by-weblogic.html
Hope it helps

How to start Integration server with the user XISUPER

Hi,
How to start Integration server with the user XISUPER?
Regards,

Mahesh,
In the post installation document, under Creating User XISUPER,
I see the following,
1.You must now log on to the Integration server host with the user XISUPER, to switch the initial password to a valid password.
2.You must restart the J2EE engine to transfer the user creation to the J2EE immediately.
I am unable to proceed here.Can you please help me to resume the post installation steps ?
Thanks,

Error when starting Weblogic server with Coherence

We want to use Coherence 3.6 with Weblogic Server 10.3. During server startup, we get the following error. My understanding is the cluster should be started automatically based on the configuration listed below the error. Appreciate any pointers.
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.920/67.311 Oracle Coherence SE 3.6.0.4 <Error> (thread=Cluster, member=n/a): This member could not join the cluster because of a configuration mismatch between this member and the configuration being used by the rest of the cluster. This member specified a cluster name of "EPCIS" which did not match the name of the running cluster. This indicates that there are multiple clusters on this network attempting to use overlapping network configurations. Rejected by Member(Id=9, Timestamp=2011-11-16 13:58:42.941, Address=10.229.189.30:8088, MachineId=21022, Location=site:us.oracle.com,machine:adc2101177,process:30667, Role=WeblogicServer).>
<Dec 15, 2011 3:20:11 PM PST> <Error> <oracle.apps.pas.epc.framework.db.Cache> <BEA-000000> <java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)>
<Dec 15, 2011 3:20:11 PM PST> <Error> <Coherence> <BEA-000000> <2011-12-15 15:20:11.957/67.349 Oracle Coherence SE 3.6.0.4 <Error> (thread=[STANDBY] ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)', member=n/a): Error while starting cluster: java.lang.RuntimeException: Failed to start Service "Cluster" (ServiceState=SERVICE_STOPPED, STATE_JOINING)
CONFIGURATION:
We have the following descriptor (epcis-coherence-cache-config.xml) in $DOMAIN_HOME/epc-config:
<?xml version="1.0"?>
<!DOCTYPE cache-config SYSTEM "cache-config.dtd">
<cache-config>
<caching-scheme-mapping>
<cache-mapping>
<cache-name>*</cache-name>
<scheme-name>distributed</scheme-name>
</cache-mapping>
</caching-scheme-mapping>
<caching-schemes>
<distributed-scheme>
<scheme-name>distributed</scheme-name>
<service-name>DistributedCache</service-name>
<backing-map-scheme>
<local-scheme></local-scheme>
</backing-map-scheme>
<autostart>true</autostart>
</distributed-scheme>
</caching-schemes>
</cache-config>
We also have tangosol-coherence-override.xml in the same dir:
<coherence>
<cluster-config>
<member-identity>
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>
</member-identity>
</cluster-config>
<configurable-cache-factory-config>
<class-name>com.tangosol.net.DefaultConfigurableCacheFactory</class-name>
<init-params>
<init-param>
<param-type>java.lang.String</param-type>
<param-value>epcis-coherence-cache-config.xml</param-value>
</init-param>
</init-params>
</configurable-cache-factory-config>
<license-config>
<edition-name system-property="tangosol.coherence.edition">SE</edition-name>
<license-mode system-property="tangosol.coherence.mode">dev</license-mode>
</license-config>
</coherence>
We have modified startWebLogic.sh by adding:
PRE_CLASSPATH="/slot/xyz/oracle/mwhome/oracle_common/modules/oracle.coherence_3.6/coherence.jar:${DOMAIN_HOME}/epc-config/:${PRE_CLASSPATH}"

As the error message says, your WebLogic server is trying to join a cluster that has a different cluster name.
This bit in your tangosol-coherence-override.xml file or the tangosol.coherence.clustername system property must be the same in all members of the cluster
<cluster-name system-property="tangosol.coherence.clustername">EPCIS</cluster-name>JK

Can't start WebLogic Server with SP6 and jdk1.2.2 using WebLogic Console

Hi All,
I am trying to install WebLogic 5.1 with SP6 under Windows NT 4.0 with SP6. My goal is to run JSP/Servlets. After going through all the steps described in SP6 Readme I am getting th following exception:
ava.lang.reflect.InvocationTargetException: java.lang.NoSuchMethodError: weblogic.boot.ServerClassLoader: method getClassLoadNotify()Lweblogic/boot/ClassLoadNotify; not found
     at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:140)
     at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:112)
     at weblogic.utils.classloaders.GenericClassLoader.<init>(GenericClassLoader.java:104)
     at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader.<init>(RecursiveReloadOnModifyClassLoader.java:53)
     at weblogic.utils.classloaders.RecursiveReloadOnModifyClassLoader$SingleSlave.<init>(RecursiveReloadOnModifyClassLoader.java:149)
     at weblogic.servlet.internal.ServletContextImpl.setClassLoader(ServletContextImpl.java:1408)
     at weblogic.servlet.internal.ServletContextImpl.<init>(ServletContextImpl.java:518)
     at weblogic.t3.srvr.HttpServer.initServletContexts(HttpServer.java, Compiled Code)
     at weblogic.t3.srvr.HttpServer.start(HttpServer.java:388)
     at weblogic.t3.srvr.T3Srvr.start(T3Srvr.java, Compiled Code)
     at weblogic.t3.srvr.T3Srvr.main(T3Srvr.java:827)
     at java.lang.reflect.Method.invoke(Native Method)
     at weblogic.Server.startServerDynamically(Server.java:99)
     at weblogic.Server.main(Server.java:65)
     at weblogic.Server.main(Server.java:55)
The installation document is pretty bad intermixing different types of installations. Where can I find steps or what do I need to do to get WebLogic to run with JDK1.2.2 if I want to start it up from WebLogic console only?
Thanks,
Mark.

Try rather using the 1.4 version available here: http://java.sun.com/j2ee/1.4/
and use this dedicated forum: http://forum.java.sun.com/forum.jsp?forum=136
-Alexis

How to start weblogic server automattically (services.msc)

Hi Experts,
I would like to monitor Hyperion services. ( I know only weblogic console option; please let me better option if any)
I regularly login to Hyperion server and start admin server for weblogic then using url for console I check status of all service.
start>Programs> Oracle Weblogic>user projects>EPM System> start Admin server for Weblogic
but when i logout from Hyperion server admin server for weblogic automatically logout. Please suggest which services i can put automatically in windows services (services.msc) so that i need not to start manually.
Please help
Regards,
Kumar

Have a search on the internet for "weblogic admin server as a windows service" and you will gets lots of results.
Cheers
John
http://john-goodwin.blogspot.com/

Start weblogic server with java argument

Hello,
I am using weblogic server version 10.2. And the environment have one Admin server and two machines.
In admin console, one managed sever is configured with Java argument in "Server Start". The java option can be passed to JVM when i start the managed server in admin console. i confirmed that by execute ps the java process from the linux server. However, the java argument cannot pass to the JVM when i start from command line as below. is there any specific configuration required?
/weblogic/bea102/wlserver_10.0/common/bin/wlscontrol.sh -d premium_102_internet_qa -n /weblogic/ndmgr -c -f startManagedWebLogic.sh -s server_qa_svra START
PLease help!
Thanks,
Angus

You have to use the nodemanager. The parameters are added to a file startup.properties, located in the
directory: <middleware-home>/user_projects/domains/<domain-name>/servers/<server-name>/data/nodemanager
The file startup.properties is used by the nodemanager to start your managed server.
You can start your environment by using a start script (written using WLST), for example,
beahome = '<middleware-hoem>';
adminusername = 'username';
adminpassword = 'password';
domainname = 'domain-name';
linux = true;
pathseparator = '/';
if not linux:
pathseparator = '\\';
domainlocation = beahome + pathseparator + 'user_projects' + pathseparator + 'domains' + pathseparator + domainname;
nodemanagerhomelocation = beahome + pathseparator + 'wlserver_10.3' + pathseparator + 'common' + pathseparator + 'nodemanager';
print 'START NODE MANAGER';
startNodeManager(verbose='true', NodeManagerHome=nodemanagerhomelocation, ListenPort='5556', ListenAddress='localhost');
print 'CONNECT TO NODE MANAGER';
nmConnect(adminusername, adminpassword, 'localhost', '5556', domainname, domainlocation, 'ssl');
print 'START ADMIN SERVER';
nmStart('AdminServer');
nmServerStatus('AdminServer');
print 'CONNECT TO ADMIN SERVER';
connect(adminusername, adminpassword);
print 'START MANAGED SERVER';
start('ServerName','Server');
nmServerStatus('ServerName');

How to find weblogic Server memory for particular user

In a weblogic server how can i get the information for each user approximately
it occupying "x" size of memory...is there any command..so that based on number
of users i can increse my memory and harddisk space.

Hi,
Following sql will help you find the responsibilities associated with the users in oracle applications.
SELECT frt.RESPONSIBILITY_NAME, furg.end_date
FROM
fnd_user_resp_groups furg,
FND_RESPONSIBILITY fr,
fnd_responsibility_tl frt,
fnd_user fu
WHERE fu.user_name = ‘&&username’
AND fu.user_id = furg.user_id
AND furg.responsibility_id = fr.RESPONSIBILITY_ID
AND frt.responsibility_id = fr.RESPONSIBILITY_ID
ORDER BY 1
Cheers...

Cannot start weblogic server anymore in oracle user after config. in root

Hi all,
My weblogic server 10.3.4.0 installed in oracle developer days in oralce linux guest was able to start before using the oracle user account. However, after I copied a folder into the autodeploy directory in weblogic server under the root account, I am not able to start the weblogic server anymore using the oracle user account. The folder I copied into the autodeploy directory is called Joseki.war which is used to access Sparql service and semantic techonologies in Jena. Can anybody pls give some advice to fix the issue? Thank you very much in advance.

Wrong forum - your post has nothing to do with the Oracle database. You wanted a WLS forum.

Starting Weblogic server with eclipse.

Hi,
I am trying to start the web logic server through Hudson build.I have specified the goals in pom.xml and i am using cargo plugin (maven). When i build using Hudson. It builds the war file and copies to folder so when the weblogic starts it uses that war file. But in my case the the war file is copied to correct location where the server expects it when it starts but when it tries to deploy it takes from the Hudson location where it was created can anyone help me with this? i need some help with this so that when i deploy it picks the correct war file.
I have the pom.xml that i was using.
Thanks in advance.
<plugin>
<groupId>org.codehaus.cargo</groupId>
<artifactId>cargo-maven2-plugin</artifactId>
<version>1.0</version>
<configuration>
<wait>false</wait>
<container>
<containerId>${container.name}</containerId>
<home>${container.home}</home>
<log>${container.server.home}/servers/${container.server.name}/logs/${container.server.name}.log</log>
<output>${container.server.home}/servers/${container.server.name}/logs/${container.server.name}.out</output>
<timeout>600000</timeout>
</container>
</configuration>
<executions>
<execution>
<id>start-container</id>
<phase>pre-integration-test</phase>
<goals>
<goal>start</goal>
<goal>deploy</goal>
</goals>
<configuration>
<home>${container.server.home}</home>
<type>existing</type>
<properties>
<cargo.java.home>${container.java.home}</cargo.java.home>
<cargo.servlet.port>${container.port}</cargo.servlet.port>
<cargo.jboss.configuration>default</cargo.jboss.configuration>
<cargo.rmi.port>1099</cargo.rmi.port>

Hope your pom.xml file is not suitable to WebLogic. it is for Jboss.
Let me point you to right link here: https://docs.sonatype.org/display/M2ECLIPSE/Using+Maven+with+application+servers#UsingMavenwithapplicationservers-Weblogic
Change your pom.xml file accordingly and let us know what is the situation for your eclipse.
Edited by: PavanBhavanishekhar on Nov 2, 2010 12:52 PM

How to start VPN Server with PPTP + How to backup Addressbook Server

Hey people,
I currently have Lion Server running on my mac mini server, it was upgraded to Lion (server) from Snow Leopard server.
Now i have 2 issues i'd like to address and ask your help for.
1. VPN Server on Lion Server.
I have had the VPN server running on Snow Leopard server without a problem, however, since my Lion upgrade it just isn't working with PPTP anymore.
I did read alot of discussions here and also read that you can configure it through the terminal using the serveradmin tool.
I have followed the instructions to get PPTP enabled, but it just isnt listening on the correct port, i don't see anything running nor can i connect from my Lion client to the server (i get server not responding).
Does anyone experiece the same problem? or know how to solve this?
2. Addressbook Server on Lion Server.
I have a few network users on my system, they use the Addressbook server through their iphone/ipad.
I don't know how to backup their contacts they added in the server, is there a way to backup the data?
I have already tried to export the user using the Workgroup Manager, but when i look in the file, i don't see any additional info other then the user settings.
I have been thinking of reinstalling the server to a complete fresh Lion only installation instead of the current upgraded Lion from Snow Leopard, that's why i need to backup the info.
Time Machine backups of an upgraded Snow Leopard Server to Lion Server won't work on a fresh Lion Server installation, i have always had the problem that it can't read the data for some reason.
Anyone know a solution for these 2 issues?

Hi,
In your base module MANIFEST.MF include Rest module in ATG-Required.
It like,
ATG-Required: DCS B2CCommerce WebUI Rest
Hope it will work for you.
Regrads
Kumaresh Babu A

Starting a weblogic server as a non system user

How to Start Weblogic server as an NT Service with the user other thant
"system". I have to start weblogic server with a differnt user name.
Thanks
Madhu

I have included the user in the administrator group and the group has the
permission to boot. But still it does not work. It throws an exception
Fatal
Initialization exception java.lang.illegalaccesserror unable to open process
token--bad domain name.
Thanks
Madhu
Jean-Michel GAUTREAU <[email protected]> wrote in message
news:3c036d56$[email protected]..
try creating a new user and make it a member of the Administrator group.
Then verify that the Administrator group is a grantee in the "boot"
permission in the weblogic.server ACL.
To start WLS with this new user, try to specify this user in the wlscommand
line (i think it must be like -Dweblogic.boot.user=<user name>, but i'mnot
sure, so take a look at the WLS6 help).
hope this will be useful
best regards
JM Gautreau
WLS ADministrator
France
"m holur" <[email protected]> a écrit dans le message news:
3bfac4d2$[email protected]..
How to Start Weblogic server as an NT Service with the user other thant
"system". I have to start weblogic server with a differnt user name.
Thanks
Madhu

How to start managed server on Weblogic 9.1 Admin console with jRockit

I configured a new 9.1 domain with jRockit as the JVM. Under Server Start, I used -server -Xgcprio:pausetime -Xpausetarget=400ms -Xms:256m -Xmx:384m -Xns:81m -Xgcpause in the Argument field. When I tried to start the server, I am getting the following error:
<May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Starting WebLogic server with command line: C:\bea\jrockit90_150_04\bin\java -Dweblogic.Name=jdevext -Dbea.home=C:\bea -Djava.security.policy=c:\bea\weblogic91\server\lib\weblogic.policy -Dweblogic.management.server=http://144.111.155.145:7001 -Djava.library.path=C:\bea\WEBLOG~1\server\bin;.;C:\WINDOWS\system32;C:\WINDOWS;C:\bea\WEBLOG~1\server\native\win\32;C:\bea\WEBLOG~1\server\bin;C:\bea\JROCKI~1\jre\bin;C:\bea\JROCKI~1\bin;C:\bea\WEBLOG~1\server\native\win\32\oci920_8;C:\oracle\ora92\bin;C:\Program Files\Oracle\jre\1.3.1\bin;C:\Program Files\Oracle\jre\1.1.8\bin;C:\Program Files\ThinkPad\Utilities;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Support Tools\;C:\Program Files\Intel\Wireless\Bin\;C:\Program Files\ThinkPad\ConnectUtilities;C:\Program Files\QuickTime\QTSystem\ -Djava.class.path=C:\bea\weblogic91\server\lib\weblogic.jar;C:\bea\jrockit90_150_04\lib\tools.jar;c:\bea\weblogic91\server\lib\wamapps\commons-logging.jar;c:\bea\weblogic91\server\lib\wamapps\log4j.jar;c:\bea\weblogic91\server\lib\wamapps\xalan.jar;c:\bea\weblogic91\server\lib\wamapps\xercesImpl.jar;c:\bea\weblogic91\server\lib\wamapps\xml-apis.jar -Dweblogic.system.BootIdentityFile=C:\bea\user_projects\domains\jdev\servers\jdevext\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false java -server -Xgcprio:pausetime -Xpausetarget=400ms -Xms:256m -Xmx:384m -Xns:81m -Xgcpause -verbose weblogic.Server >
<May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Working directory is "C:\bea\user_projects\domains\jdev">
<May 24, 2006 11:16:55 AM> <Info> <NodeManager> <Server output log file is "C:\bea\user_projects\domains\jdev\servers\jdevext\logs\jdevext.out">
Usage: java [-options] class [args...]
(to execute a class)
or java [-options] -jar jarfile [args...]
(to execute a jar file)
where options include:
-jrockit     to select the "jrockit" VM
-client     to select the "client" VM
-server     to select the "server" VM [synonym for the "jrockit" VM]
The default VM is jrockit.
-cp <class search path of directories and zip/jar files>
-classpath <class search path of directories and zip/jar files>
A ; separated list of directories, JAR archives,
and ZIP archives to search for class files.
-D<name>=<value>
set a system property
-verbose[:class|gc|jni]
enable verbose output
-version print product version and exit
-version:<value>
require the specified version to run
-showversion print product version and continue
-jre-restrict-search | -jre-no-restrict-search
include/exclude user private JREs in the version search
-? -help print this help message
-X print help on non-standard options
-ea[:<packagename>...|:<classname>]
-enableassertions[:<packagename>...|:<classname>]
enable assertions
-da[:<packagename>...|:<classname>]
-disableassertions[:<packagename>...|:<classname>]
disable assertions
-esa | -enablesystemassertions
enable system assertions
-dsa | -disablesystemassertions
disable system assertions
-agentlib:<libname>[=<options>]
load native agent library <libname>, e.g. -agentlib:hprof
see also, -agentlib:jdwp=help and -agentlib:hprof=help
-agentpath:<pathname>[=<options>]
load native agent library by full pathname
-javaagent:<jarpath>[=<options>]
load Java programming language agent, see java.lang.instrument
<May 24, 2006 11:16:57 AM> <Info> <NodeManager> <Server failed during startup so will not be restarted>

It looks like your command line is broken. You have:
java <lots of -Dprop=value> java <JRockit flags> weblogic.Server
That second "java" shouldn't be there.
-- Henrik

Weblogic server with OIM non-root

Friends,
I am installing OIAM on top of Weblogic Server on CentOSLinux OS .
The problem is i want to install weblogic server and OIAM with non-root so that it does not have security issues.
When i try to install weblogic i am unable to install it with normal user rights in /opt dir it requires root access. As per the document oiam install on top of weblogic should not be a problem but the major issue is running weblogic with non-root.
pls let me know abt install and running weblogic as a non-root user, or a pointer to the documentation.
thank you

I have installed weblogic server as an nt service. In install Nt service
cmd, if I make any change in the script, I have to uninstall and install it
again. I do not know where to specify the weblogic.management.username =(Non
system user)
I have created a user name in NT server and added them to Administrator
group. I have also modified in file realm propertes i.e to boot and shutdown
the non system user.
I have to start weblogic server as a non system user.
Thanks
Madhu
I think I replied to some of the questions when I found out the answers.
Only thing I did was hit reply, instead of reply group. Might it went to
persons e-mail. That might be the reason, the answers I posted is not found
in the newsgroup
Thanks
freelance_code_inspector <[email protected]> wrote in message
news:[email protected]..
"m holur" <[email protected]> wrote in message
news:<3bfbafce$[email protected]>...
I want to start wls6.1 as an nt service with different user name otherthan
system.Madhu,
Specify weblogic.management.username={Non system user} in your -D
option. BTW, just curious, have observed that u have been posting a
lot of weblogic questions lately, did u find out the answers? If so, u
should share it back to this community.
Regards
drit
Freelance Java Developer/Code Inspector
http://www.geocities.com/doc_i_t/CodeInspectionService.html

How to start weblogic server with non system user

Similar Messages

Maybe you are looking for