How to group arts into a group

I look in AIArtSuite but could not figure out how to group multiple arts into a group.
Please help.

Thanks very much, this is how I ended up doing:
There are 2 arts to be grouped: image (kPlacedArt) and path (kPathArt).
I created a new art of type kGroupArt and place the other two inside it.
    sAIArt->NewArt(kGroupArt, kPlaceAboveAll, nil, &group);
    sAIArt->ReorderArt(image, kPlaceInsideOnTop, group);
    sAIArt->ReorderArt(path, kPlaceInsideOnTop, group);

Similar Messages

How do you add into a group a contact you added onto your i-phone?

How do I put into a group a contact I added to my i-phone 6?

Use your MacBook Pro to add the contact to the group. If you sync Contacts via iCloud the contact will be added to the group on your iPhone.

How to save contact into a group

i was trying to save a new contact into a group in contacts and it is not going in the group but i is going just into the icloud contacts.

Morning jpuralil,
Thanks for using Apple Support Communities.
If you're having issues with Contacts on your iPhone, once you've completed General Troubleshooting, skip to the iOS section.
iCloud: Troubleshooting iCloud Contacts
http://support.apple.com/kb/ts3998
To sync contacts with your computer, choose "Sync Contacts with" within iTunes for Windows, or "Sync Address Book Contacts" on your Mac.
For more information on this, take a look at this article:
iCloud: Add a new contact
http://support.apple.com/kb/PH2659?viewlocale=en_US
Create a new contact
In Contacts, click the Add button at the bottom of a list of contacts.A blank contact card appears.
Type information for the contact, and add a photo if you want.
Click Done.
Best of luck,
Mario

Trouble grouping years into decade groups

Hello. I have encountered a problem with a pivot table (PT ) used to create a demo dashboard for snowfall data at a ski resort.
My data is in an Excel Table beginning with column 'Season' (1970, 1971, 1972, etc. through 2014). Each column to the right of the ‘Season’ column has snowfall data for each month of that year (Oct, Nov, Dec, etc. )
First, I created a PT from my source data to illustrate Annual Snowfall trends from 1970 – 2014. Then I created a pivot chart (line) for later addition to a dashboard. It is on a tab called ‘AnnualTotals’. So far so good.
But when I attempt to start with a new tab to create a (2nd) pivot chart, from the same data source, for the purpose of grouping snowfall totals by decade - any Grouping in my new 'SnowfallByDecade' tab changes the first 'AnnualTotals' tab as well –
even though the new (2<sup>nd</sup>) PT is on a different tab.
The original data for 'Seasons' was TEXT, so I changed it to 'General' in hope that would solve the problem. But I am still unable to create a new tab to group by decade without Excel automatically modifying the first pivot table and pivot (line) chart
(‘AnnualTotal’ tab).
I have made dashboards before with grouping and never saw this phenomenon, so I am confused.
Any comments or suggestions are welcome. Thanks in advance.
I also have an Excel (xlsx) file that can e-mail for further investigation.

Hi,
The reason the change of the pivot table is effecting you charts, because the charts are linked to the pivot table.
Because it is linked it is called a pivot chart.
You can do two things, remove the link and select the parts you want to make the chart from. Every time you have a change, you might need to refresh it.
Or make a new pivot table for you second chart. When your pivot is updated your chart will also automatically update.
You will have a pivot for both chart designs.
With pivot tables (in excel 2010) you also have the option slicers. This kan also make it easy to change the pivot table, that is a nice feature.
Good luck!
Reshma
Please Vote as Helpful if an answer is helpful and/or Please mark Proposed as Answer or Mark As Answer when question is answered

Need ability to group forums into logical groups as a user.

As heavy reader & contributor of the CRM forums, there are getting to be so many forums it is difficult to look through and assist on so many column headings. Plus I believe the more novice users frequently submit their question in the wrong forum.
I would love to group (Personalize) these topics to see all new post or limit my searches to these forums. It is still o.k. if I post a question to where it has to be in a specific forum.
Customer Relationship Management (CRM) - General & Framework
CRM Webclient UI
CRM Web Channel E-Commerce, E-Marketing & E-Service
CRM 7.0
CRM - Interaction Center
CRM Sales

Hi Faisal,
Thank you very much for your prompt reply. With your suggestion, I do figure out where my problem is. I did set the control flag in my ldapAuthenticator "OPTIONAL". However, it appears that the DefaultAuthenticator is given as "REQUIRED" by default.
Once I changed it to be "OPTIONAL", it works.
Thanks again.
John

How can I copy a list of email address into a group folder in contacts?

I have a list of all the email addresses of my tennis club members. How can I copy that into a group address. At the moment I have to find each one and drag it into the folder, but I am sure there must be an easier way. Does anyone know what that is?
Loftyjs

I'm glad you figured it out. I was thrown off by literally interpreting the term "list" I guess
In truth, a "mailing list" of multiple recipients, when applied to a particular email message is nothing more than a "comma de-limited list" of the addresses. Some mail clients add < > on either end of the individual addresses
[email protected],[email protected],[email protected],etc.
<[email protected]>,<[email protected]>,<[email protected]>,etc.
in the old days, we would just keep a text file an add to the end as needed.
lists are commonly used as 'Mini-databases' in Adobe(Macromedia) Director, my everyday tool for years. A list of lists, then becomes a bigger database as does a list of a (list of lists), and so on
Too much information, methinks

How can I drag and drop a Tidal job into another group?

How can I drag and drop a Tidal job into another group? In Tidal Help, it says-
In the Jobs pane, press and hold the Ctrl key and at the same time right-click and either individually select individual jobs within a job group or drag your mouse cursor over a block of jobs that you wish to select. You can only move multiple jobs between job groups if the jobs being moved are on the same level.
Keeping the right mouse button depressed, drag the cursor to the job group that you wish to move the jobs to and release the mouse button.
When moving jobs from one job group to another, you must decide if the moved jobs keep their original job group attributes or assume the calendar and agent characteristics of its new job group.
A confirmation dialog, offers three inheritance options for the jobs moved to the "new" job group parent. Select one of the following options:
However, when I attempt to follow those instructions, it doesn't work at all and there is no indication that it's even trying (i.e., I don't see the selected job following my cursor at all and all I get is the normal menu when you right click anywhere on the screen.)
Is there another way to do this or is there a master setting that needs to be changed so that ability is enabled?
Thanks.

Go into edit mode for the job group group and just manually edit the section for Parent job/Group.
Cheers

How to group documents into folders

How do you group documents into folders on iPad Adobe Reader

You make a folder first, then you move files into the folder.
Start with the Documents on the left. Click the Edit button (upper right). Click the Add Folder button (folder with + icon). Name the folder.
Then Click the Edit button, if necessary. Click on the names of files (you'll see checkboxes). Then click the Add to Folder button (arrow into folder icon).

I have 67 email addresses I want to add to address book into a group, how do I do that

I have 67 email addresses I want to add to address book into a group, how do I do that

What version of the Mac OS are you running?

How so I drag and drop a card from my email list into a group?

Hi, when I try to drag and drop a card into a group folder it will not accept it. What am I doing wrong? Thank you.
Jim

Are trying to do this from an email message?

How to place grouped items into another object with content collector tool?

Is it possible to paste a group into another object (i.e. frame) by using the Content Collector Tool while linking the content? Paste Into is either deselected or possibly whatever was last saved to the clipboard ends up inserting. I was able to place grouped, linked content into a frame (and later applied a scrollable frame overlay to it) once or twice but can't seem to repeat. Tried selecting the object being pasted into.. holding shift, holding ctrl, all kinds of options, just very confused now.

Found a potential work-around (I think....).
1. Use the Content Collector tool and select grouped objects
2. Select Content Placer tool, check "Create Link"
3. Place grouped object into doc/onto page with Content Placer tool
4. Copy placed grouped objects
5. Paste into frame that will be scrollable later
For now it seems like the link still works

How do I move all of my contacts from one iCloud contacts group into another group (all iCloud) without having to make all my contacts again?

So on my iPod I have all of my contacts but on my iPad I don't. This is because my contacts are NOT in the iCloud group. Is it possible to move all of your contacts to a different group (for me iCloud group) so I can have my contacts on my iPad (without having to creat all of my contacts again in the iCloud group from scratch). Thanks :)

Do the contacts that are not in iCloud belong to an external account such as Gmail, Yahoo or an Exchange account? Or, do they belong to On My iPhone?

How do I use Panorama / Tab Groups with the keyboard?

Yes I know that CTRL-SHIFT-E opens the panorama window, and then I can use the mouse to organize my tabs into groups.
But how do I do this with the keyboard?
I've [http://lifehacker.com/#!5719596/switch-between-tab-groups-in-firefox-with-a-keyboard-shortcut read] [http://ubuntuforums.org/showthread.php?t=1705714 that] Ctrl-`should move me through tab groups. That doesn't work for me on my Danish keyboard. (Where the ' and ` chars are weird. But is how they are on a valid standard Danish keyboard) I've tried changing the keyboard to USA and then moving through tab groups works fine.
In short: Pretend I don't have a mouse. How do I use Panorama / Tab Groups?

Sorry. These are both known bugs:
[https://bugzilla.mozilla.org/show_bug.cgi?id=587010 Bug 587010] - Add keyboard UI for manipulated groups and tabs in Tab Candy
and
[https://bugzilla.mozilla.org/show_bug.cgi?id=626594 Bug 626594] - shortcut for switching tab groups is badly accessible on many non-US keyboard layouts

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

How do I (easily) Create a Group E-mail List

First I want to say that I am not a dummy. I’m pretty tech savvy, but this issue has been making me crazy for a long time. I know that what I am about to describe be has to do (probably) with the fact Mail and Contacts work separately, unlike in Windows products. The whole point of me moving to the Mac from Windows was to make things easier.
I have tried to see if there’s an easy way to create a Group, but I can’t seem to find the handle on this. I repeat, I am not a tech dummy.
Here’s the issue: Every week I send out an e-mail to a group of friends. What I normally do (since I have not found an easier way) is to go to my Send folder, find the previous week’s email, copy all the addresses and paste into the new e-mail.
On all the Help Discussion topics I see in the Apple Forums (I’ve been to many), what it says is that you go to Contacts, Create a New Group, and then click and drag e-mail addresses into the new group. I get it, and I’ve done that for other groups. But this is different.
Is there not a way to simply copy all the addresses from the previous week’s email I sent and copy that into a Group? There are too many names for me to go one by one inside the Contacts app. Moreover, I don’t know all the contacts in the prior week’s list. I’d have to go back and forth between the prior week’s e-mail and my Contacts list, and check names and e-mails, and then drag into the Group.
Please Apple, there has to be an easier way.
Macbook Pro, OS X Mavericks.

I have this same issue. I have over 100 email addresses that I need to add to a group. The issue is not making the group, it's getting the email addresses from Mail to Contacts.
Dragging the email addresses does nothing. You can copy the addresses, but there's nowhere to put them. You can make a VCF for an email address, but then you have to find all of them to add them to the group. How do you automate this?!
I'm astounded that there's so little support for such a common issue for which people have been asking for years.

How to group arts into a group

Similar Messages

Maybe you are looking for