How to handle finished goods without PP module

Hi
I am a MM consultant and i have been placed in an implementation project where there is no PP module. But client wants to dispatch Finished goods without BOM and PP module but it needs to be captured through MM module.
Request your help and how to resolve this kind of scenario?
Expecting a favourable reply at the earliest.
Thanks & Regards
DVP

Hi Dusthakar,
Its not uncommon to have such a requirement to handle finished products in MM without using Production Planning module. You will maintain FG material#s as well as Raw Material#s. Create BOM for those FG materials. Create a vendor for your company on its own name. Create a Subcontracting Purchase Order for FG on to this vendor. It brings in BOM to PO,..,you may verify at material data tab of item. You can receive it to your plant. You may mark Free or charge on item. This will make it nothing to be paid to this vendor. FG comes to your plant. How do you like this approach We have been doing this for the past couple of years!
Reward points only if you are thrilled with this solution!
Regards

Similar Messages

Unable To Receive Finished Goods in production module

Hi Experts,
I am unable to receive some finished goods in production module through Receipt from production form and it will not through any exception. The problem occurs only for few production rest of production is received with out any problem.
Regards

hi parminder
there has to be ceratin message as somethimes we overlook and there is the message being displayed that is hidden below the status bar .
One thing is are u able to add the document receipt from production . is there a message " done successfully"
Regards,
Manish
Edited by: manish.malik on Apr 30, 2010 4:53 PM

How to unpack finished goods!

Hi All,
I have a question :
We packing 100 promotion A from 2 finished goods(100 B and 100 C and somes auxiliary materials). But after promotions, we sold 80 A and have 20 A in stock, we want to unpack 20 A to B and C.
How can we do that ?

Hi,
This will be kind of reversing the production.
Create production order of with header material as B qty 20.
Put A as component and B as bi product with -20 qty.
Now confirm order and do GR of production order with final product as B and you will recieve C as bi product and
you will consume A as component.
Vishal

How to handle user command method in module ALV Grid

HI Experts,
                 I have 3 containers grid.
                 GR_GRID              TYPE REF TO CL_GUI_ALV_GRID,
                 GR_GRID1              TYPE REF TO CL_GUI_ALV_GRID,
                 GR_GRID2              TYPE REF TO CL_GUI_ALV_GRID.
                 Please advise me how can I insert, save, delete 3 Module ALV Grid in method user command. How can i get which grid button (save, insert, delete) is clicked and how can i control those grid.
                Thks in advance.
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
    METHODS :
        HANDLE_TOOLBAR
              FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
                            IMPORTING E_OBJECT E_INTERACTIVE SENDER,
        HANDLE_USER_COMMAND
              FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                            IMPORTING E_UCOMM,
        HANDLE_DATA_CHANGED
                FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
                      IMPORTING ER_DATA_CHANGED
                                E_ONF4
                                E_ONF4_BEFORE
                                E_ONF4_AFTER,
        HANDLE_DOUBLE_CLICK
                 FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                 IMPORTING E_ROW
                           E_COLUMN,
        HANDLE_HOTSPOT_CLICK
                  FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                       IMPORTING E_ROW_ID
                                 E_COLUMN_ID
                                 ES_ROW_NO.
ENDCLASS. "(LCL_EVENT_RECEIVER DEFINITION)
METHOD HANDLE_USER_COMMAND.
     CLEAR G_CODE.
    G_CODE = E_UCOMM.
    CASE G_CODE.
      WHEN 'INSERT'.
        MESSAGE 'insert' TYPE 'I'.
       APPEND INITIAL LINE TO GT_MAIN.
      WHEN 'SAVE'.
       MODIFY ZTNBOOK FROM GT_MAIN.
        MESSAGE 'save' TYPE 'I'.
      WHEN 'DELETE'.
       DELETE FROM ZTNBOOK WHERE B_ID EQ GT_ZTBOOK-B_ID.
        MESSAGE 'delete' TYPE 'I'.
    ENDCASE.
    IF NOT G_CODE IS INITIAL.
PBO, PAI
     CALL METHOD CL_GUI_CFW=>SET_NEW_OK_CODE
       EXPORTING
         NEW_CODE = G_CODE.
     CLEAR G_CODE.
    ENDIF.
ENDMETHOD.

Hi,
Before posting, Search in SDN.
See the below tread it will help you.
Re: Get table for cl_gui_alv_grid

How to handle The Back button on Module Pool screen

Hi Gurus,
I have created a module pool screen. In that screen I have used some input/output fields(text box) which i have marked mandatory by making the input field as "required" under program tab.
now when running the screen if no data is entered into these mandatory input field then BACK button does not work. First I have to enter some data into the input filed only then the BACK button works. How should i code so that the back button works even without entering the data into these mandatory fields.

hi,
use AT EXIT-COMMAND with the module.
eg. module user_command at exit command.
then there will be no problem.

Need your input on how to handle "Practice" items in Captivate module

HI, I currently have short lessons in Captivate. I am using the TOC. The lessons have an introduction, content, conclusion and practice. How have you been handling the practice items?
I'd like users to take the practice. then I want them to go back to the practice to retake it. but i also want to track the results. so far i have set captivate to track results for the lms. i also set the questions to 2 tries. i have also allowed captivate to go backward in the test. the problem is that after the user answers the practice quetions once, and they go back, they see their answers and cannot change them. in the toc, they can't move back and forth in the practice section. i don't know what design strategy to use. a practice a just a practice and not an assessment where they can't change their answers. however, i'd like the lms to track their practice.
Any ideas?

I'm growing increasingly frustrated with the Captivate Quiz feature. I wish I did not have to use it. I want the quiz to act as a "practice" section where users can navigate freeley between questions and to interactive screens within the Captivate module. Currently, i can't do that. once you take the "practice" and you go back to "other parts of the module" we can't get back to the practice. THERE MUST BE A WAY TO FIX THIS!!!!!!!!!!!!!!!!!!!!

How to create sales employee without HR module

Dear Experts
IMGSDMASTER DATABUSINESS PARTNER-USE SALES EMPLOYEE WITHOUT HR
2. Define PErsonnel area (usually locations)
3. Define PErsonnel Subarea (bifurcations within loctions, may not exist but recommended to be maintained)
4. Define Employee Group ( usually Types of employment)
5. Define Employee sub group (usually used as grades)
6. Assign Employee sub groups to Employee groups
7. partner function part also i finish in sales order it shows fine
i already finish above steps and i already gone the more than 40 threads
but in t.code VPE1 system show the message
Choose an action type
can you please guide what steps i have to do further so i can create sales employee

hello, friend.
try t-code VPE1 or PAL1. even without HR, you may have to define certain HR organizational units in Enterprise Structure (e.g. personnel areas and sub-areas).
regards.

How to handle foreign purchasing without LCM.Any workaround??

Hi All,
I am looking for a good workaround for foreign purchasing since i don't have the oracle LCM module.at the point of PO we do not know other charges like freight,custom duty and insurance etc...,However these needs to be incorporated into the item cost. Any workaround ??
Regards,
Chanaka

This is an excellent point – all other updates in Creative Cloud are unforced and up to the customer as to when they are installed... The Creative Cloud Desktop app should be as well.
Hope Adobe can change this.
Note: Here is the update history, on average about once per month –
http://helpx.adobe.com/creative-cloud/release-note/cc-release-notes.html

RG23A Part I for Finished Goods?

Hi All,
Has anybody noticed if you select an excisable item as Finished Goods under excisable on item master data screen and having raised an outgoing excise invoice and if you run a report either RG23A Part I OR RG23A Part II from Excel Reporter you will not be getting any report whatsoever.
then what is the purpose of providing "Finished Goods" option when it is not generating any reports? but it is working fine with Raw Material and Capital Goods item types.
Can anybody explain the scenario on how to use finished goods option and generating excise reports for those kind of items?
Thanks
SV Reddy

Hi Datta, thanks for the reply
according to SAP Note 1062872 (2005B version) it reads as
"The excise register for excisable items of type raw materials/finished goods is currently set to RG32A Part I. When you create an out going excise invoice with these type of items, the accumulator for RG32A Part I will be increased."
I thought the same is applicable with SAP Business One 2007B version. However what you said might be correct. But the problem with one of my manufacturing client is whenever they raising an Outgoing Excise invoice they have registered numbers automatically be created on the pre printed invoice paper. where the invoice will be printed only with the qty, rate , price and register numbers rest of the information on the document is pre-printed. So they have a column called RG23C Part I / II where register numbers are automatically printed. But RG23C Part I & II are for "Capital Goods"
If I consider these manufactured items as "capital goods" then it will raise register numbers automatically. but this will not acceptable. correct me if i am wrong. so all of these items should be cosidered as Finished Goods in the item master data. if i do that again there is a conflict with their RG23C Part I / II on the pre-printed column and i wont be raising any register numbers.
Please update me on how should I deal with this issue
SV Reddy

Map Scenario Goods Issue to Production without PP Module

Hi All
In one of our client have Implemented PS & all basic module in customer project. Now they want to map their production activity under one of the WBS but they don't implemented PP module. So how to do goods issue process for semi finish or finish material which contain BOM. Is it possible to map production scenario in PS without PP module ??
As per my knowledge by creating internal activity we can manage cost for each operation as we maintain in routing but how to make goods issue of child material to parent material in BOM.
Regards

Hi Ahemad
I already search forums before post to fulfill my requirement. Assembly items are created in network activities and are represented as reservations with negative quantities.You can assign an assembly item to an activity either manually, by entering a negative requirements quantity, or by using BOM transfer. can you focus more light on this as I tried this scenario I face the problem with negative quantity
Regards

How to handle a fixed length file without newline?

Hi Experts,
I'd like to handle a fixed length file without newline by sender file adapter.
A file like following.
It contains three recores."AAXBBBXCCCCX" is one record.
AA1BBB1CCCC1AA2BBB2CCCC2AA3BBB3CCCC3
I tried that following two parameters set. But only first recored was read.
fieldFixedLengths
fieldFixedLengthType
Please tell me how to handle.
Thanks
Shinya Kawagoe.

For this case we wrote a simple Adapter Module inserting an end of line character after an offset.
This way it can be reused in many interfaces.
And reading the whole file may not be an option in case of large source files. May cause performance / memory issues.
eolbean.offset = <recordLlen>
XMLPayload xmlpayload = msg.getDocument();
byte[] content = xmlpayload.getContent();
byte crlf = 0x0A;
int current = 0;
ByteArrayOutputStream baos = new ByteArrayOutputStream();
int lines = content.length / recordLen;
do
     lines--;
     baos.write(content, current, recordLen);
     if (lines > 0) // if other lines, eol required
          baos.write(crlf);
          current += recordLen;
} while (lines > 0);
xmlpayload.setContent(baos.toByteArray());
baos.close();
Audit.addAuditLogEntry(key, AuditLogStatus.SUCCESS,     MODULE + " Done EOLing.");

How to including the finished goods as raw material to the other FG?

Hi Gurus,
Have a nice day!
We would like to create production order for our semi finished goods and then we will doing confirmation. After we have produced our semi finished goods, we would like to include it in the bom as raw materials for our final FG. But how to handle this situation? Any suggestion on how the procedure to do it that the cost will not be double..when confirming the semi FG production it will generate cost for the usages of it raw materials. The semi FG is valuated then when i included it as raw material into Final FG it will generate cost for consumption in doing confirmation. I dont know the correct term for this scenario. In other word or semi FG will be part as a raw material to the next production.
Please advise if you have been encountered the same scenario with me.
Thanks ,
Weldin

Hello Gurus,
Thanks julian for contributing your idea. I really appreciated it.
Right now all activity in manufacturing FG is combine in one production order. Let say we have two activity one is the extrusion and the other one is bagging and printing. From our current set up, we would like to separate the activity. The idea is one production order for extrusion serve as semi-finished good. Then this semi-FG will be added in the component of our final FG which is the bagging and printing because in actual transaction that would be the procedure. Theoritically, we would like to separate the cost of extrusion activity to bagging activity. That is why we will be trying to figure out how to do it right for the analysis purposes.
Other of my idea is when i will set the semi FG to non valuated material. So that when i add the semi FG as component to our Final FG no double costing happen. But when we will run the costing run it will compute low cost in terms of standard price for our final product.
Thanks and best regards,
Weldin angelo

Planning without considering inventory of finished goods.

Hi
My users for asking for this, which don't make much sense to me, but I am a beginner in PP module. We are implementing MRP now. They want to input actual Production quantity in MD61 as PIR for the finished good and want MRP to generate Planned orders for whatever the quantity's entered in MD61, regardless of inventory, receipts for the MPS item. They want MRP to only look at component inventory and accordingly create Planned orders for dependant requirements. Is this possible in SAP & how do I do it?
Thanks
Suri

Hi Prasobh
Users want to continue to use their spreadsheet in arriving at the production plan & input that quantity in MD61 & have MRP create Planned orders for them, so that they can backflush against those planned orders, regardless of inventory situation for those finished goods. I am still not convinced about their decision on that. They want MRP to throw planned orders only when there is shortage of components, so that they can convert those to Purchase req. in order to buy them.
Appreciate your help..
regards
Suri

Create Handling unit after receiving finished goods from production

Hello,
My client's requirement is that they do not want a TR or TO to get created at the time of Production order confirmation and neither they want to create the Handling unit at the time of confirmation.
They want to move the material from production to warehouse as one Handling unit after multiple confirmations. They want to create Handling unit manually after the receipt of materials.
What is the process of creating Handling unit after we have FG (multiple batches).
After creation of Handling units, my client wants to ship the same Handling unit out to customer.
How to create Handling unit
Regards
Prabhjot Singh

Hi,
If I understand right - customer wants a simple transfer of finished goods from production to warehouse, and latter pack into handling units.
Possible scenario:
1) Assign production order to non-WM and non-HU storage location. Post GR for production order using transaction MIGO (mvmt. type 101) for a whole quantity produced for production order.
2) Setup packing table in IMG (Logistic General > Handling Units > General > Setup packing table> ...) --> packing table is a functionality for packing goods into HU - it takes goods from predefined source non-WM/non-HU location, packs them into HU and places them in target WM-HUM location.
2) Maintain packaging instruction (trans. POP1 and POF1) to automate the packaging quantities.
3) Run packaging table by HUPAST, select your table and pack.
4) Packed HU ends up on WM-HUM location.
This process can be done either in SAP GUI (HUPAST) or you can build it in RF transaction and run it with mobile RF scanner (ABAP development required).
Hopefully this will be of any help.
Regards, Primoz

How to handle file on application server without coading?

HI all,
can anybody tell me How to handle file on application server without coading? Is there any solution?
Thanks in advance.

> can anybody tell me How to handle file on application server without coading? Is there any solution?
what is that you want to handle. what you do if you don't code ...

How to handle finished goods without PP module

Similar Messages

Maybe you are looking for