Need your input on how to handle "Practice" items in Captivate module

HI, I currently have short lessons in Captivate. I am using the TOC. The lessons have an introduction, content, conclusion and practice. How have you been handling the practice items?
I'd like users to take the practice. then I want them to go back to the practice to retake it. but i also want to track the results. so far i have set captivate to track results for the lms. i also set the questions to 2 tries. i have also allowed captivate to go backward in the test. the problem is that after the user answers the practice quetions once, and they go back, they see their answers and cannot change them. in the toc, they can't move back and forth in the practice section. i don't know what design strategy to use. a practice a just a practice and not an assessment where they can't change their answers. however, i'd like the lms to track their practice.
Any ideas?

I'm growing increasingly frustrated with the Captivate Quiz feature. I wish I did not have to use it. I want the quiz to act as a "practice" section where users can navigate freeley between questions and to interactive screens within the Captivate module. Currently, i can't do that. once you take the "practice" and you go back to "other parts of the module" we can't get back to the practice. THERE MUST BE A WAY TO FIX THIS!!!!!!!!!!!!!!!!!!!!

Similar Messages

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

Enable 802.11n - Need your inputs

Okay Guys need your input
I've heard that if you want to enable High Speed WLAN connection such as 802.11n you need to have you security settings as WPA2 and AES
Is this true?

Hi
Typically configuration guide - 802.11n configuration section listed this. Below is form 7.4 Config Guide section
"The 802.11n high-throughput rates are available on all 802.11n access points for WLANs using WMM with no Layer 2 encryption or with WPA2/AES encryption enabled."
Thanks for rating our responses as well. If this answer your query you can mark this thread as "Answered"
HTH
Rasika
**** Pls rate all useful responses ****

How to handle defect items in sap sd..

Hi Friends,
How to handle defect items in sap sd..
My requirement is some of the XYZ materials are damaged 10%.Some more materials(Material number is XYZ) are damaged to 20%.When sales order is created with these defect items,the system should pickup the defect items only?One more thing is for 10% damaged items,one price is given.For 20% damaged items,one more price is given and so on.How this will be configured in sap sd.
We hav an idea that making these type of defects as scrap.Then create one more material number as AXYZ(Defects of XYZ) and receipt without po.We can use the defects in sales order and soon.But how pricing will be set for different levels of damages?
Any ideas,documents and settings required for this scenario and share any ideas
Thanks in advace....VM

Hi All,
Thank you very much for your replies and sharing your valuable information
Just I am giving all the meeting points and those are
They donu2019t want to convert into scrap.
One more point is that if materials are in batches then???
When we create sales order that damaged one only should be picked by the system.
Manual entering the price need to be stopped
Without maintaining separate material for the damaged, any possibilities?
We discussed abt Split valuation point .Is it suitable to this? then how?
How to handle this we are thinking.
Both Rithvikau2019s point and Jigneshu2019s point need to be considered, actually this is main issue. There are more chances of malpractices/confusion to the user as mentioned by Rithvika. Here one more constraint is more material codes required for 10%, 20%, 30%........90% damaged one for one material as said by Jignesh
Actually I mentioned only as example 10% and 20% but have many.
Any ideas how to proceed...
Thanks and Regardsu2026VM
Edited by: vm on Apr 13, 2009 4:45 PM

Please tell me how to handle list item in this concern

please tell me how to handle list item in this concern
My problem is:
i have a category table with column categoryname(varchar type)
I want to display the records of categoryname in a drop down list (i.e., list item )
So ..please tell me how to do it
Thanks in advance..

This code is just a sample from the Help documentation. It won't work until you modify it for your form.
Why do you have "steps" in your code? You are suppose to do what the steps tell you. You don't place the steps in your code. The steps must be removed from your code.
Step 1 code goes in a program unit, not in a trigger.
Step 2 and 3 code usually goes in a trigger.
You will have to replace the names of the items and record group with your own names as you have defined them in your form.
step 1: create a procedure in your application
procedure load_list(itm in VARCHAR2, rg in VARCHAR2) is
group_id RecordGroup := Find_Group(rg);
list_id Item := Find_Item(itm);
Begin
if Populate_Group(group_id)<>0 then
Message('Unable to populate record group');
Raise Form_Trigger_Failure;
end if;
Clear_List(list_id);
Populate_list(list_id, group_id);
end;
step 2: create a record group named rg_cat and assign Record Group Query to something like "select categoryname from category"
step 3: call this procedure as
load_list('categoryname','rg_cat');

Need detailed procedure on how to add an item with Item Style Check Box in

Need detailed procedure on how to add an item with Item Style Check Box in Framework.

The view instance should be the same as the view instance (view object) specified for your region.
If the View Attribute already that you need already exists in the View Object then you can use it.
Otherwise you have to extend the View Object and add the new attribute to it.
--Prasanna

WebCenter 11g Ps3 Tutorial: need your input

I am starting a little new project. The idea is to build a hands on tutorial about webcenter ps3. In the tutorial you will build a complete webcenter portal from scratch. I will explain every single line of code we will write. We will start with a regular webcenter portal application and build from there on so no pre build application were we only do a few modification. Everything will be explained from scratch.
By the end of the tutorial you should be able to build a fully portal by yourself.
I have an outline ready for the tutorial but i also want your input. If you guys want a topic covered in the tutorial, please let me know and i can consider it adding it to the tutorial.
You can leave a comment here or add it to my blogpost about it: http://www.yonaweb.be/coming_soon_webcenter_11g_ps3_tutorial

Its sounds good, We are looking for the following things,
1) JSR 286 Portlet Creation and communication between the portlets
2) Template Creation(Header, Footer, Left menu templates like)
3) Multi skin facility(Theme based on the user choice)
4) Login Page integration with any LDAP
Hope i make sence, Thanks in advance...
NGSankar

How to handle finished goods without PP module

Hi
I am a MM consultant and i have been placed in an implementation project where there is no PP module. But client wants to dispatch Finished goods without BOM and PP module but it needs to be captured through MM module.
Request your help and how to resolve this kind of scenario?
Expecting a favourable reply at the earliest.
Thanks & Regards
DVP

Hi Dusthakar,
Its not uncommon to have such a requirement to handle finished products in MM without using Production Planning module. You will maintain FG material#s as well as Raw Material#s. Create BOM for those FG materials. Create a vendor for your company on its own name. Create a Subcontracting Purchase Order for FG on to this vendor. It brings in BOM to PO,..,you may verify at material data tab of item. You can receive it to your plant. You may mark Free or charge on item. This will make it nothing to be paid to this vendor. FG comes to your plant. How do you like this approach We have been doing this for the past couple of years!
Reward points only if you are thrilled with this solution!
Regards

I need to find out how to have Speakable Items available each time I boot up.

I use Mavericks Speakable Items every day to open and close applications without using my mouse if function keys.
The only way I get it to start is to calibrate it AFTER boot up.
I need to find out how to have it available each time I boot up my Mac Mini with OS 10.9.4,
Suggestions.

In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")

How to handle user command method in module ALV Grid

HI Experts,
                 I have 3 containers grid.
                 GR_GRID              TYPE REF TO CL_GUI_ALV_GRID,
                 GR_GRID1              TYPE REF TO CL_GUI_ALV_GRID,
                 GR_GRID2              TYPE REF TO CL_GUI_ALV_GRID.
                 Please advise me how can I insert, save, delete 3 Module ALV Grid in method user command. How can i get which grid button (save, insert, delete) is clicked and how can i control those grid.
                Thks in advance.
CLASS LCL_EVENT_RECEIVER DEFINITION.
PUBLIC SECTION.
    METHODS :
        HANDLE_TOOLBAR
              FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
                            IMPORTING E_OBJECT E_INTERACTIVE SENDER,
        HANDLE_USER_COMMAND
              FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
                            IMPORTING E_UCOMM,
        HANDLE_DATA_CHANGED
                FOR EVENT DATA_CHANGED OF CL_GUI_ALV_GRID
                      IMPORTING ER_DATA_CHANGED
                                E_ONF4
                                E_ONF4_BEFORE
                                E_ONF4_AFTER,
        HANDLE_DOUBLE_CLICK
                 FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
                 IMPORTING E_ROW
                           E_COLUMN,
        HANDLE_HOTSPOT_CLICK
                  FOR EVENT HOTSPOT_CLICK OF CL_GUI_ALV_GRID
                       IMPORTING E_ROW_ID
                                 E_COLUMN_ID
                                 ES_ROW_NO.
ENDCLASS. "(LCL_EVENT_RECEIVER DEFINITION)
METHOD HANDLE_USER_COMMAND.
     CLEAR G_CODE.
    G_CODE = E_UCOMM.
    CASE G_CODE.
      WHEN 'INSERT'.
        MESSAGE 'insert' TYPE 'I'.
       APPEND INITIAL LINE TO GT_MAIN.
      WHEN 'SAVE'.
       MODIFY ZTNBOOK FROM GT_MAIN.
        MESSAGE 'save' TYPE 'I'.
      WHEN 'DELETE'.
       DELETE FROM ZTNBOOK WHERE B_ID EQ GT_ZTBOOK-B_ID.
        MESSAGE 'delete' TYPE 'I'.
    ENDCASE.
    IF NOT G_CODE IS INITIAL.
PBO, PAI
     CALL METHOD CL_GUI_CFW=>SET_NEW_OK_CODE
       EXPORTING
         NEW_CODE = G_CODE.
     CLEAR G_CODE.
    ENDIF.
ENDMETHOD.

Hi,
Before posting, Search in SDN.
See the below tread it will help you.
Re: Get table for cl_gui_alv_grid

How to handle ovedue items in Credit Mgt OVA8

My requirement was that to handle Overdue items in Credit Maanagement in the TCode OVA8
Regards
Madhav

hi Madhav:
you can first mark the [tab] check field "static" as selected and second:"reaction" choose D :like
B+value by which the credit limit has been exceeded.
By setting this when over quantities the order cannot be saved.
If there existing over date checking you can mark the NextReview date and also chose D in the reaction
field.
Regards
Yu Chaoqun
Jan,07,2008

Desire to replace my hard drive... need your input!

I have an almost 3 year old Powerbook and I am in need of more space. My 100 gig hard drive is being stretched thin by work and I tire of carrying around mutliple 4gig-80gig externals.
So I would love to put in a 160 gig hard drive to help simplify things (not to mention I was told it's not a horrible idea to replace a HD after 3 years) and throw my 100 in an external case as backup.
So I looked on Newegg and found a Western Digital for about $110 then I called my local Apple Authorized retailer (Firsttech, who I have generally had good experiences) to check on prices if I didn't want to do it myself.
The quoted me:
$180 for the drive
$125 for transfering everthing to the new drive
$125 for labor to replace the drive
This all seems a little steep to me. Can I get your guys thoughts on this?
I saw the forum post about how to replace the hard drive yourself and it looks do-able, but I have never dug into my Powerbook any further than RAM replacement.
What do you guys think?
2.66 Mac Pro 2gigs RAM ATI and 7300 cards; Powerbook G4 17in Mac OS X (10.4.9)

To do the transfer before hand put the drive you are about to swap in inside a Firewire hard drive case and use Shirt-Pocket Superduper to clone your information.
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
Test its ability to boot your machine, and then it is ready to be transferred internally.
Then you'll have a clone which can be moved into your internal.
http://www.macsales.com/ offers Firewire hard drive cases for 2.5" Parallel ATA drives.
And then in the future, simply update your backup with Superduper to another Firewire hard drive of equivalent or greater size, and use the old internal for one of your archival storage mediums.

Need your inputs..

Hi,
I need to generate report, if PO payment term not matched to vendor default payment term.
PO related fields are available in this datasource 2LIS_02_ITM , So I can load the data into 0PUR_O01 ODS.
Vendor related fields are available in this info object 0VENDOR_ATTR.
Now my question is how to combine these two and generate the non matched list of PO payment terms?
-Arun.M.D

use MP of infoset on top of the info object and DSO and compare the values in the report.

Midi gurus need your input please

Hey guys,
My question seems quite simple, but I'm just making sure I'm not doing something that's gonna cause issues.
The setup.
MOTU 828MkII (has 1 in 1 out midi)
M-Audio 88es controller (just midi out)
Mackie Universal Controller (1 each)
Mackie Extender controller (1 each)
Mackie C6 (1 each)
considering the above setup, I need to get them all hooked up right to Logic. Do I simply get a MOTU MIDI Express XT USB, or ????
Can I just daisy chain them? (out the m-daudio, into the MUC, out that to MEC, out that to MC6, out that to 828 which is connected via firewire to Mac) If so is there a drawback?
I'm not too up and up on how to best get midi hooked and performing right, so any help would be greatly appreciated. I just got the Mackie stuff, so I am a bit baffled by what the best way to connect things is. Mackie recommends some kind of Midi 'patch bay', but before I drop another couple hundred bucks wanted to make sure I needed to and am doing it right.
Thanks
R

If you can find a used Unitor 8mk2.. get it. maybe there is one on ebay.
They work really well with Logic.
I also have a motu midi timepiece that works well.
Both have SMPTE ins.
The other guys are correct, you need a separate port for each piece of control surface.
So a multi-port midi interface is what is needed. The models I mantion have smpte (LTC) as well.

SD Friends I need your inputs for below

Hi..
I need guidance related to below issues...request you to reply me at the earliest..
1)Fields in Customer master recoreds are not populating properly while taking printouts...
what camn be wrong in configuration/printer settings....it is basis settings or sd has to change some settings?
2)In generation of pro-forma invoice service material is not getting picked up? where shud be settings/improvments?
3)customers reference doc no is different from SAP Number ranges...can I maintain any PO settings in inquiry,quotation,sales order so that customer can get WHATEVER NO IS DESIRED TO GET?
4)CIN- Can J1id entries be made mandatory for customer/material with respect to sales order?How
5)My client want report which displays all billing documents which doent have any accounting documents/entries?is any report possible wrt ABAP?Any logic need to developed?
6)Pro-forma invoice shd not pick up the completed billing item values from sales order.....IS ANY setting exist in VTFA/Other cpy control for this....or do I need to develop any report with the help of ABAP for this?
7)Requirement is for a report which shows output with Item Code,Description,Qunatity,Unit,Cost Price,Raw material cost,shop cost & total cost...is such report possible to develope? what will I have to do that?
Request you to suggest me any guidelines/solution for above.......
(If not for all above ..for at least for those areas you have idea/expertise...)
Thanks
Manoj

1)Fields in Customer master recoreds are not populating properly while taking printouts...
what camn be wrong in configuration/printer settings....it is basis settings or sd has to change some settings?
Give the appropriate requirement to Abaper to incorporate in SAP Script / Smart forms.
2)In generation of pro-forma invoice service material is not getting picked up? where shud be settings/improvments?
Give the appropriate requirement to Abaper to incorporate in SAP Script / Smart forms.
3)customers reference doc no is different from SAP Number ranges...can I maintain any PO settings in inquiry,quotation,sales order so that customer can get WHATEVER NO IS DESIRED TO GET?
No. Not Possible in Standard SAP.
4)CIN- Can J1id entries be made mandatory for customer/material with respect to sales order?How
Just check in Account Group setting, if you can make the required fields mandatory. The SAP IMG path is as under:
Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Define Account Groups with Screen Layout (Customers)
5)My client want report which displays all billing documents which doent have any accounting documents/entries?is any report possible wrt ABAP?Any logic need to developed?
You will have give the logic to Abaper to check if the the billing document is released to accounting, then it should be excluded in 'Z' report & only include Those billing documents which are not released to accounts.
There is a standrad report also with Transaction Code: VFX3 Check if this servers the purpose.
6)Pro-forma invoice shd not pick up the completed billing item values from sales order.....IS ANY setting exist in VTFA/Other cpy control for this....or do I need to develop any report with the help of ABAP for this?
If you refer to Proforma Invoice WRT Order, it will pick by default all the items in sales Order. This is Standard SAP. I suppose that Abap development may also not be helpful, as what logic will you provide to select the required items.
7)Requirement is for a report which shows output with Item Code,Description,Qunatity,Unit,Cost Price,Raw material cost,shop cost & total cost...is such report possible to develope? what will I have to do that?
Abap Development.
Regards,
Rajesh Banka
Reward points if helpful.

Need your input on how to handle "Practice" items in Captivate module

Similar Messages

Maybe you are looking for