How to handle spaces in string?

Hi,
I am trying to filter out servers and certain OS from my powershell line below but I am getting an error. I think it is because of the Mac OS X line with spaces?:
The string is missing the terminator: '
$AllADClientObjects=@(Get-ADComputer -Filter "operatingSystem -notlike '*server*'" -and "operatingSystem -notlike '*"'Mac OS X'*'" -ErrorAction SilentlyContinue)

Try this:
$AllADClientObjects = @(Get-ADComputer -Filter "operatingSystem -notlike '*server*' -and operatingSystem -notlike '*Mac OS X*'")
You shouldn't need the -ErrorAction SilentlyContinue when using filter because if it doesn't find anything, it will not throw an error like if you used -Identity.
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

Similar Messages

How to handle spaces in Sender File

I have sender file and it is reading wrongly as it is not reading spaces. It is fixed file lengthe with no seperator.
Following r the parameters I am using but still it is not picking up spaces.
ignoreRecordsetName                                 true
Record.fieldSeparator                                   nl
Record.endSeparator                                    nl
Record.additionalLastFields                        ignore
Record.missingLastfields                            ignore
Record.fieldContentFormatting                    nothing
Record.fixedLengthTooShortHandling           ignore
Record.fieldFixedLengths                           15,25,9,1,15,20,15,1,3,15,1,3,9,50,100,50,100,100,15
Record.fieldNames                                      15,25,9,1,15,20,15,1,3,15,1,3,9,50,100,50,100,100,15
Record.keepIncompleteFields                           YES
My file format looks like as follows....there r 2 recods and u see psaces after each line they r part of particular field. Please help how to handle this..
GLPRMS         Other                    20-MAR-09A               30800845237527018000000000000000000.000000000000011241.34020-MAR-09260IN0103-616714                                                                                260IN0103-616714                                                                                REFR1 - 000000 / REFR2 - 000000 / REFR3 - SUMRY           / TRANSFERS FROM
GLPRMS         Other                    20-MAR-09A               30800845237527018000000000000000000.000000000000000305.60020-MAR-09260IN0103-616714                                                                                260IN0103-616714                                                                                REFR1 - 000000 / REFR2 - 549944 / REFR3 - 7691            / TRANSFERS FROM
Thanks in advance
Ria
Edited by: ria sen on Mar 25, 2009 4:00 AM

Hi Ria,
Use the parameter Record.fieldContentFormatting = nothing
If you dont specify this parameter trim is taken as a default value hence you are not gettign the spaces.
This parameter should help you .
Regards,
Rajesh

Help :how to remove spaces in string

could any body please help me in removing spaces from string suppose i have written vivek chhabra and i want to remove spaces in this string and want a string vivekchhabra then how this could be done
anybody help me please
vivek

String string = "Hello - This is a test!";
String result = string.replaceAll(" ", "");
System.out.println(result);This code results the following output:
Hello-Thisisatest!

How to delete Spaces in String

Can somebody help to modify my source, cos i want to delete certain space. Thanks
private static String printStar(int SpaceForStar){
    String sDelOneSpace =" ", sAddOneSpace=" ", star ="*", sTtlSpace ="";
    for(int i=0; i<numSpace; i++){
      sTtlSpace += sAddOneSpace;
    for(int i =0; i<8; i++){
      sTtlSpace = sTtlSpace - sDelOneSpace;   // seem that not working.. can somebody help Thanks
    return sTtlSpace+star;
}Thanks in advance
jas

What you are trying to do will not work - subtraction of Strings does not make any sense.
To remove spaces, I suggest you use a StringTokenizer with space as dividing token. Lop trough the tokens and add them to a new String, like this:
    public static void main (String[] args) throws Exception {
        String withSpace = "aaa sss bbb";
        System.out.println(removeSpaces(withSpace));
    static String removeSpaces(String withSpaces) {
        java.util.StringTokenizer t = new java.util.StringTokenizer(withSpaces, " ");
        StringBuffer result = new StringBuffer("");
        while (t.hasMoreTokens()) {
            result.append(t.nextToken());
        return result.toString();
    }This will remove all spaces, and print "aaasssbbb". If you only want to remove the first or the last space, you can use indexOf() or lastIndexOff to find the space, and then substring to pick the text before and after that space and concatenate those two strings to a new string without the space:
    static String removeFirstSpace(String withSpaces) {
        int spaceIndex = withSpaces.indexOf(' '); //use lastIndexOf to remove last space
        if (spaceIndex < 0) { //no spaces!
            return withSpaces;
        return withSpaces.substring(0, spaceIndex)
            + withSpaces.substring(spaceIndex+1, withSpaces.length());
    }

How to handle space in incoming file during fcc

Hi all,
I have a scenario of file to proxy. In this case the incomming file is space delimited and it begins with space too i.e. every new line item has a space in the begining I have to remove that space. How can i handle it...please help.
The fcc I am using is mentioned below:
Record.fieldSeparator      '0x32'
Record.fieldNames           a,b,c,d
Record.endSeparator       'nl'
Record.additionalLastFields ignore
ignoreRecordsetName        true.
Thanks
Shivangi

This is my input payload
<?xml version="1.0" encoding="utf-8" ?>
- <ns:BRItemPrice_MT xmlns:ns="urn:test">
- <Record>
<VendNum>888700 0611593 0046.0800 00000838081 00014</VendNum>
<CCITEM>0033861</CCITEM>
</Record>
- <Record>
<VendNum>888700 0611597 0048.0000 00000838084 00014</VendNum>
<CCITEM>0033869</CCITEM>
</Record>
- <Record>
<VendNum>888700 0611599 0046.0800 00000838085 00014</VendNum>
<CCITEM>0033887</CCITEM>
</Record>
</nstest_MT>
And the fcc iI'm using is as below:
Record.fieldSeparator     '0x32'
Record.fieldNames     VendNum,CCITEM,CCCOST,HSITM,UPC
Record.beginSeparator     '0x32'
Record.endSeparator     'nl'
Record.additionalLastFields     ignore
ignoreRecordsetName     true
Please help.
Thanks

How to handle spaces in using path to the file

Hi Friends,
I am getting error "file not found" if I give path of the file that contains spaces in it. (eg. C:\Users\Sample Project\file.txt)
If I give path that doesn't contain spaces (eg. C:\Users\Sample\file.txt) then it works fine without any error.
Basically I am invoking one command at runtime (using "exec") in my java program that excepts path of the file as one parameter.
I can't remove space by manipulating path - othewise that path will be different.
How can I solve this issue?
Thanks

Works for me:
import java.io.*;
public class ProcessExample {
    public static void main(String[] args) throws IOException {
        if (args.length == 0) {
            Runtime r = Runtime.getRuntime();
            dump(r.exec("java ProcessExample foo \"bar baz\""));
        } else {
            for(String s : args) {
                System.out.println(s);
    static void dump(Process p) throws IOException {
        BufferedReader r = new BufferedReader(new InputStreamReader(p.getInputStream()));
        for(String s; (s = r.readLine()) != null; ) {
            System.out.println("[" + s + "]");
}But ejp's advice is even better.

How to handle xml CDATA string element when OSB calling a webservice

Hi
Right, I'm new to OSB so bear with me.
The following is a response from am operation in a webservice.
As you can see there is a CDATA string in "<m:return>" element. I want to transform the CDATA string to XML.
I have searched the forum and found a couple of similar queries and tried following the answers and this is what I'm getting.
Please advise as to where I have gone wrong and how I can correct it.
<env:Body xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
     <m:ReservationCancelResponse xmlns:m="http://domain/jws">
          <m:return>
               <![CDATA[<?xml version="1.0" encoding="UTF-8"?><ReservationCancelNegativeAck><MessageId>HGv2OWS6hq</MessageId><ReservationNum>1234</ReservationNum><CsrId></CsrId><ErrorCode>02</ErrorCode><ErrorMessage>Reservation '1234' does not exist.</ErrorMessage></ReservationCancelNegativeAck>]]>
          </m:return>
     </m:ReservationCancelResponse>
</env:Body>
In my response pipeline I have an Assign and Replace action.
My Assign is:
Expression: fn-bea:inlinedXML($body)
Variable: reservationCancelReponse
When I log $reservationCancelReponseI get... so this bit is OK.
<ReservationCancelNegativeAck>
<MessageId>HGv2OWS6hq</MessageId>
<ReservationNum>1234</ReservationNum>
<CsrId/>
<ErrorCode>02</ErrorCode>
<ErrorMessage>Reservation '1234' does not exist.</ErrorMessage>
</ReservationCancelNegativeAck>
My Replace
XPath: executeResponse/executeReturn/text()
In Variable: body
Expression: responseTransform.xq (binding with $reservationCancelReponse)
Replace Node Contents is checked
When I test the operation using the proxy service I get the following:
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header/>
<env:Body>
<m:ReservationCancelResponse xmlns:m="http://com/ventyx/abws/jws">
<m:return>
<?xml version="1.0" encoding="UTF-8"?><ReservationCancelNegativeAck><MessageId>HGv2OWS6hq</MessageId><ReservationNum>1234</ReservationNum><CsrId></CsrId><ErrorCode>02</ErrorCode><ErrorMessage>Reservation &apos;1234&apos; does not exist.</ErrorMessage></ReservationCancelNegativeAck>
</m:return>
</m:ReservationCancelResponse>
</env:Body>
</env:Envelope>
The CDATA string hasn't been transformed.
Please help. What I have I missed.
Thanks in advance.
MI

OK
I have made some amendments to the original process and made some progress but still isn't quite right.
I have created a schema:
<complexType name="ReservationCancelNegativeAckType">
     <sequence>
               <element name="MessageId" minOccurs="0">
                    <annotation>
                         <documentation>
                         </documentation>
                    </annotation>
                    <simpleType>
                         <restriction base="string" />
                    </simpleType>
               </element>
               <element name="ReservationNum" minOccurs="0">
                    <annotation>
                         <documentation>
                         </documentation>
                    </annotation>
                    <simpleType>
                         <restriction base="string" />
                    </simpleType>
               </element>
               <element name="CsrID" minOccurs="0">
                    <annotation>
                         <documentation>
                         </documentation>
                    </annotation>
                    <simpleType>
                         <restriction base="string" />
                    </simpleType>
               </element>
               <element name="ErrorCode" minOccurs="0">
                    <annotation>
                         <documentation>
                         </documentation>
                    </annotation>
                    <simpleType>
                         <restriction base="string" />
                    </simpleType>
               </element>
               <element name="ErrorDescription" minOccurs="0">
                    <annotation>
                         <documentation>
                         </documentation>
                    </annotation>
                    <simpleType>
                         <restriction base="string" />
                    </simpleType>
               </element>
     </sequence>
</complexType>
<element name="ReservationCancelNegativeAckType"
     type="tns:ReservationCancelNegativeAckType">
</element>
I have amended the earlier Assign action to use an XQ to extract the CDATA string into the schema
My Assign is:
Expression: responseToSchema.xq
Variable: reservationCancelReponse
When I log $reservationCancelReponse variable I get... so this bit is OK.
<ReservationCancelNegativeAck>
<MessageId>HGv2OWS6hq</MessageId>
<ReservationNum>1234</ReservationNum>
<CsrId/>
<ErrorCode>02</ErrorCode>
<ErrorMessage>Reservation '1234' does not exist.</ErrorMessage>
</ReservationCancelNegativeAck>
I have also changed my Replace, this time I am using an XQ which will map the schema to the XSD WSDL "ReservationCancelResponse"operation.
XPath: .
In Variable: body
Expression: responseFromSchemaToService.xq (binding with $reservationCancelReponse)
Replace Node Contents is checked
XSD WSDL is:
<xsd:element name="ReservationCancelResponse"
     type="tns:ReservationCancelResponseType">
</xsd:element>
<xsd:complexType name="ReservationCancelResponseType">
     <xsd:sequence>
          <xsd:element name="ResponseCode"
               type="xsd:string">
          </xsd:element>
          <xsd:element name="ResponseDescription"
               type="xsd:string">
          </xsd:element>
          <xsd:element name="MessageID" type="xsd:string">
          </xsd:element>
          <xsd:element name="ReservationNum" type="xsd:string">
          </xsd:element>
          <xsd:element name="CsrId" type="xsd:string">
          </xsd:element>
          <xsd:element name="ErrorCode" type="xsd:string"
               minOccurs="0">
          </xsd:element>
          <xsd:element name="ErrorDescription" type="xsd:string" minOccurs="0"></xsd:element>
     </xsd:sequence>
</xsd:complexType>
This time the response is better but not right.
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/">
<env:Header xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"/>
<env:Body xmlns:env="http://schemas.xmlsoap.org/soap/envelope/">
<app:ReservationCancelResponse xmlns:app="http://www.example.org/AppointmentService/">
<ResponseCode>0</ResponseCode>
<ResponseDescription/>
<MessageID/>
<ReservationNum/>
<CsrId/>
</app:ReservationCancelResponse>
</env:Body>
</soapenv:Envelope>
As you can see the tags are empty. (For info: The "ResponseCode" and "ResponseDescription" are constants)
Where have I gone wrong?

How to trim spaces from string in BMM layer?

Hi friends,
I need to trim spaces from the string. can you please give me syntax with example.
Thanks

Hi
I have tried the below option , but it did not work . PS_D_PERSON
PERSON_ID is char type in the data base oracle , and it is defined as varchar on the physical layer .
So the table is loaded with space , i am not able to remove the space using trim both
Thanks
Sridhar.N

How to handle spaces when calling javaw.exe or java.exe

Hi guys, I'm in the process of releasing my application.
My application need to make this system call on Windows.
C:\Program Files\MySoftware\javaw.exe -jar C:\Program Files\MySoftware\myJar.jar C:\Program Files\MyDocs\MyArgumentFile
this 'Program Files' for after the javaw.exe call: C:\Program Files\MySoftware\myJar.jar causes a problem because javaw.exe consider C:\Program as it's first argument and thus crash.
I wonder what to do with this. I don't want to change it to C:\MySoftware since it looks unprofessional.
A cup of Java, cheers

yawmark wrote:
I wonder what to do with this.Quotation marks.
~Right, every shell I can think of allows you to use quotation marks around a set of any characters that you want to be treated as one token. Note that this feature is a function of the shell you're using, not necessarily the system API. Also, many shells treat single quotes and double quotes differently, though they usually both accomplish the purpose of grouping what they contain into a single token.

How to sum space delimited hex values in a string, and do other stuff?

Hello
I am trying to write a Bourne shell script that takes a non-constant-length character string as input, converts each character to hexidecimal value, sums each value, takes the two's complement of the sum, logically ANDS it with FF, and if any of the resultant "nibbles" are a-f, print/save that nibble as A-F, for later display as a two-character-long character string
For example, assume a variable (as in non-constant) length variable $A
A="w04:0;2"
the road that I started down was to define
B=$( echo $A | od -An -t x1 -N"${#A}" )
# for this example, $B=77 30 34 3a 30 3b 32
It's the middle part where I need some magic. What I want to do is add the whitespace-delimited hex values of this string, for this example
C=77+30+34+3a+30+3b+32
so for this example, $C=1b2
then take two's complement of $C; for this example, $TWOS_COMP=ffff ffff ffff ffe4e
and logically AND it with FF; for this example, almost-final answer is 4e
then save final result as uppercase character string variable (for this example, variable's contents would be 4E)
Is what I'm trying to do intuitively obvious to any of you gurus out there, that could rattle off an answer? I'm okay with trashing my approach thus far and trying something totally different, within the constraint that it run inside a Bourne shell script.
Thanx in advance, if anybody can help!

I've made progress. I've converted each character of a non-constant-length string $A into a space-delimited string of hex values, added them up, and retained the least significant byte (i.e., the 8 least significant bits). Here's how:
B=$( echo $A | od -An -t x1 -N"${#A}" )
D=0
for C in $B; do
C=0x$C
D=$(($D + $C))
done
D=$(($D & 16#FF))
D=`echo "ibase=10;obase=16;$D" | bc`
The missing piece now is how to take the two's complement of $D. Anybody out there with any ideas on how to handle the two's complement piece inside a Bourne shell?
Thanx

How to handle an invisible character in a string?

Hi,
I have an interesting situation-
select bac_person_id, length(bac_person_id) from bkmap_personid_stg where BAC_PERSON_ID like '%27136317%'
The result is -
BAC_PERSON_ID|LENGTH(BAC_PERSON_ID)
27136317| 9
I don't know what is the invisible character here?
It is certainly not a blank character as trim is not working -
select * from bkmap_personid_stg where trim(BAC_PERSON_ID) = '27136317'
no records!!
But substr does give me the resullt -
select * from bkmap_personid_stg where substr(BAC_PERSON_ID,1,8) = '27136317'
How can I know which is the last character? and How to handle it?

girija_pathak wrote:
How can I know which is the last character? and How to handle it?You use the DUMP() function in SQL in order to see the actual content of the column.
E.g.
select DUMP(bac_person_id) from bkmap_personid_stg where bac_person_id like '%27136317%'
The decimal character values will be displayed - enabling you to see where and what control characters characters exist in the string value for that column.

How to handle user preference which has "_" and " " in the name

Hi Experts,
I have a question how to handle value which has like "_" and "space" etc in user preference.
If setting "a_b-c d", I could not retrieve this because it's escaped in database.
So this code can't get value even though I can set it.
Is there any restriction of name? Is there any documentation how to code user prefernece which has non alphabet and number in the name?
I know it's possible to handle the data like adding escaped data. But I don't think this is the best way to retrieve the data. Because nobody confirm it's not problem in the future.
Could you tell me the best way to get these user preference?
Thanks in advance,
Masaaki Tada
Here is a sample.
<%@ page contentType="text/html;charset=Shift_JIS" %><%@ page language="java" import="com.plumtree.remote.portlet.*, com.plumtree.remote.prc.*, java.util.*" %>
<%
/** * UserInfo - Simple Page * Display User Information*/
// VariablesIPortletContext oPortletContext = null;IPortletRequest oPortletRequest = null;IPortletUser oPortletUser = null;IPortletResponse oPortletResponse = null;IRemoteSession s;IUserManager oUser;
/* Get Portlet Objects */
try{oPortletContext = PortletContextFactory.createPortletContext(request, response);oPortletRequest = oPortletContext.getRequest();oPortletUser = oPortletContext.getUser();oPortletResponse = oPortletContext.getResponse();} catch (Exception e) {oPortletContext = null;oPortletRequest = null;oPortletUser = null;oPortletResponse = null;}
String val = oPortletRequest.getSettingValue( SettingType.User, "a_b-c d" );String hoe = oPortletRequest.getSettingValue( SettingType.User, "abcd" );out.println( "a_b-c d: " + val );out.println( "abcd : " + hoe );
oPortletResponse.setSettingValue( SettingType.User, "a_b-c d", "aiueo" );oPortletResponse.setSettingValue( SettingType.User, "abcd", "bbbb" );%>

Plumtree recommends that user preference names have only alphanumeric characters in them (a-z, A-Z, 0-9). Any non-alphanumeric characters will be encoded by the EDK.
I strongly suggest that you change your user pref name to something that's alphanumeric. However, if that is not possible, you can use the following workaround: in the web service editor, enter the encoded name for the user pref. There are several ways to get the encoded name.
One way is to encode the pref manually, yourself. Plumtree uses the %u encoded format: each non alphanumeric character is converted into %uxxxx, where xxxx is the Unicode representation of the character. For all ASCII characters, just look at the ASCII hex chart. For example, character "-" has a hex value of 2d. So, a preference name "jane_pref" would be encoded to "jane%u002dpref", and you'd enter the latter value on the preferences page in the web service editor.
The other way to find out the encoded value is to set a preference programmatically and use the HTTP tunnel tool to look at HTTP traffic between the portal server and remote server. The remote server will be sending a HTTP header to the portal server (the header name will probably be CSP-User-Pref) and inside the header you should see the pref name, encoded with %u. Just copy it out of there and into the web service editor.
Hope this helps,
Jane

How to handle exception CX_SY_REF_IS_INITIAL

hi experts,
im working on a test scenario for abap mapping in SAP XI im getting this error
An exception with the type CX_SY_REF_IS_INITIAL occurred, but was neither handled locally, nor declared in a RAISING clause Dereferencing of the NULL reference
i understand that i need to catch this exception in the abap coding but i'm not familiar with oops concepts
can any one please suggest me how to handle this exception for the following code...
method IF_MAPPING~EXECUTE.
break x1149.
* initialize iXML
TYPE-POOLS: ixml.
class cl_ixml definition load.
** Instances & Variable declaration =======================
* instance main factory
TYPES: BEGIN OF t_xml_line,
          data(256) TYPE x,
        END OF t_xml_line.
DATA: l_ixml TYPE REF TO if_ixml,
* instance input stream factory
   l_streamfactory TYPE REF TO if_ixml_stream_factory,
* instance input stream
l_istream TYPE REF TO if_ixml_istream,
* instance input document
l_document TYPE REF TO if_ixml_document,
* instance parse input document
l_parser TYPE REF TO if_ixml_parser,
* instance for elements within the nodes
node      TYPE REF TO if_ixml_node,
*instance of nodemap
nodemap   TYPE REF TO if_ixml_named_node_map,
* instance for iterator
iterator TYPE REF TO if_ixml_node_iterator,
name      TYPE string,
value     TYPE string,
* instance main factory
   o_ixml   TYPE REF TO if_ixml,
* instance output document
   o_document TYPE REF TO if_ixml_document,
* instance output stream
o_istream TYPE REF TO if_ixml_ostream,
* instance parse output document
o_parser TYPE REF TO if_ixml_parser,
* instance fot renderer
renderer type ref to if_ixml_renderer,
irc type i,
l_xml_size   TYPE i,
*ROOT ELEMENT
l_element_MT_DEMANDTEC_COST TYPE REF TO if_ixml_element,
*NEXT CHILD ELEMENT FROM THE ABOVE PARENT
l_element_DT_DEMANDTEC TYPE REF TO if_ixml_element,
*CHILDREN1 ELEMENT FOR DT_DEMANDTEC
l_element_DT_WHSE TYPE REF TO if_ixml_element,
*CHILDREN2 ELEMENT FOR DT_DEMANDTEC
l_element_DT_DC    TYPE REF TO if_ixml_element,
*CHILDREN3 ELEMENT FOR DT_DEMANDTEC
l_element_DT_PLANT    TYPE REF TO if_ixml_element,
*CHILDREN4 ELEMENT FOR DT_DEMANDTEC
l_element_DT_QTY    TYPE REF TO if_ixml_element.
*saving the xml document
DATA: l_xml_table       TYPE TABLE OF t_xml_line.
types: begin of t_source,
          whse(5),
          dc(4) ,
          plant(4),
          qty    type i,
         end of t_source.
types: tt_source TYPE STANDARD TABLE OF t_source.
data: wa_source type t_source.
data: it_source TYPE tt_source,
        ivalue type string.
* Procedures and business logic =======================================
*   Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
* parse input document
l_parser->parse( ).
*   Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
*   Parse the stream
IF l_parser->parse( ) NE 0.
    IF l_parser->num_errors( ) NE 0.
      DATA: parseerror TYPE REF TO if_ixml_parse_error,
            str        TYPE string,
            i          TYPE i,
            count      TYPE i,
            index      TYPE i.
      count = l_parser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.
      index = 0.
      WHILE index < count.
        parseerror = l_parser->get_error( index = index ).
        i = parseerror->get_line( ).
        WRITE: 'line: ', i.
        i = parseerror->get_column( ).
        WRITE: 'column: ', i.
        str = parseerror->get_reason( ).
        WRITE: str.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*   Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
    refresh : it_source.
    node ?= l_document.
    CHECK NOT node IS INITIAL.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
        WHEN if_ixml_node=>co_node_text.
*         text node
          value = node->get_value( ).
          if name eq 'DT_WHSE'.
            wa_source-whse = value.
          ELSEIF name eq 'DT_DC'.
            wa_source-DC = value.
          ELSEIF name eq 'DT_PLANT'.
            wa_source-PLANT = value.
          ELSEIF name eq 'DT_QTY'.
            wa_source-QTY = value.
            COLLECT wa_source INto it_source.
            CLEAR   wa_source.
          ENDIF.
      endcase.
      node = iterator->get_next( ).
    endwhile.
ENDIF.
loop at it_source into wa_source .
    at first.
*       Creating a ixml factory
      o_ixml = cl_ixml=>create( ).
*       Creating the dom object model
      o_document = l_ixml->create_document( ).
    endat.
*       Build and Fill root node MT_DEMANDTEC_COST
    AT FIRST.
      l_element_MT_DEMANDTEC_COST    =
O_document->create_simple_element(
                              name   = 'MT_DEMANDTEC_COST'
                              parent = o_document ).
    ENDAT.
*      Build and Fill Child node DT_DEMANDTEC for parent
*                                                  MT_DEMANDTEC_COST
    l_element_DT_DEMANDTEC    = O_document->create_simple_element(
                                 name   = 'DT_DEMANDTEC'
                                 parent = l_element_MT_DEMANDTEC_COST ).
*      Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-WHSE.
    l_element_DT_WHSE    = O_document->create_simple_element(
                                     name   = 'DT_WHSE'
                                     VALUE = ivalue
                                     parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-DC.
    l_element_DT_DC   = O_document->create_simple_element(
                                         name   = 'DT_DC'
                                          VALUE = ivalue
                                parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-PLANT.
    l_element_DT_PLANT   = O_document->create_simple_element(
                                             name   = 'DT_PLANT'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
    ivalue              = wa_source-QTY.
    l_element_DT_QTY     = O_document->create_simple_element(
                                             name   = 'DT_QTY'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
*   Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
                                          document = o_document ).
irc = renderer->render( ).
* how do i catch the exception for type CX_SY_REF_IS_INITIAL ...?
endmethod.
full reward points for answers.
Thanks & Regards,
Uday Kumar.
Edited by: UDAY on May 6, 2008 9:32 PM

Hi Uday,
Its occurs because you're trying to access a objects with null reference. Or you forgot to create an instance or an error occurs during the instance creation. So You should put all your "Procedures and business logic" inside a Try/catch block. as follow.
" Define a class exception object to get error message......
DATA o_exception TYPE REF TO cx_sy_ref_is_initial.
"// Use the statment Try block to catch the error.
TRY.
*   Creating the main iXML factory
l_ixml = cl_ixml=>create( ).
*   Creating a stream factory
l_streamfactory = l_ixml->create_stream_factory( ).
* create input stream
l_istream = l_streamfactory->create_istream_xstring( source ).
* initialize input document
l_document = l_ixml->create_document( ).
* Create a Parser
l_parser = l_ixml->create_parser( stream_factory = l_streamfactory
                                      istream        = l_istream
                                      document       = l_document ).
* parse input document
l_parser->parse( ).
*   Validate a document
l_parser->set_validating( mode = if_ixml_parser=>co_validate ).
*   Parse the stream
IF l_parser->parse( ) NE 0.
    IF l_parser->num_errors( ) NE 0.
      DATA: parseerror TYPE REF TO if_ixml_parse_error,
            str        TYPE string,
            i          TYPE i,
            count      TYPE i,
            index      TYPE i.
      count = l_parser->num_errors( ).
      WRITE: count, ' parse errors have occured:'.
      index = 0.
      WHILE index < count.
        parseerror = l_parser->get_error( index = index ).
        i = parseerror->get_line( ).
        WRITE: 'line: ', i.
        i = parseerror->get_column( ).
        WRITE: 'column: ', i.
        str = parseerror->get_reason( ).
        WRITE: str.
        index = index + 1.
      ENDWHILE.
    ENDIF.
ENDIF.
*   Process the document
IF l_parser->is_dom_generating( ) EQ 'X'.
    refresh : it_source.
    node ?= l_document.
    CHECK NOT node IS INITIAL.
*   create a node iterator
    iterator = node->create_iterator( ).
*   get current node
    node = iterator->get_next( ).
*   loop over all nodes
    WHILE NOT node IS INITIAL.
      CASE node->get_type( ).
        WHEN if_ixml_node=>co_node_element.
*         element node
          name    = node->get_name( ).
          nodemap = node->get_attributes( ).
        WHEN if_ixml_node=>co_node_text.
*         text node
          value = node->get_value( ).
          if name eq 'DT_WHSE'.
            wa_source-whse = value.
          ELSEIF name eq 'DT_DC'.
            wa_source-DC = value.
          ELSEIF name eq 'DT_PLANT'.
            wa_source-PLANT = value.
          ELSEIF name eq 'DT_QTY'.
            wa_source-QTY = value.
            COLLECT wa_source INto it_source.
            CLEAR   wa_source.
          ENDIF.
      endcase.
      node = iterator->get_next( ).
    endwhile.
ENDIF.
loop at it_source into wa_source .
    at first.
*       Creating a ixml factory
      o_ixml = cl_ixml=>create( ).
*       Creating the dom object model
      o_document = l_ixml->create_document( ).
    endat.
*       Build and Fill root node MT_DEMANDTEC_COST
    AT FIRST.
      l_element_MT_DEMANDTEC_COST    =
O_document->create_simple_element(
                              name   = 'MT_DEMANDTEC_COST'
                              parent = o_document ).
    ENDAT.
*      Build and Fill Child node DT_DEMANDTEC for parent
*                                                  MT_DEMANDTEC_COST
    l_element_DT_DEMANDTEC    = O_document->create_simple_element(
                                 name   = 'DT_DEMANDTEC'
                                 parent = l_element_MT_DEMANDTEC_COST ).
*      Build and Fill Child node1 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-WHSE.
    l_element_DT_WHSE    = O_document->create_simple_element(
                                     name   = 'DT_WHSE'
                                     VALUE = ivalue
                                     parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node2 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-DC.
    l_element_DT_DC   = O_document->create_simple_element(
                                         name   = 'DT_DC'
                                          VALUE = ivalue
                                parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node3 DT_WHSE for parent DT_DEMANDTEC
    ivalue              = wa_source-PLANT.
    l_element_DT_PLANT   = O_document->create_simple_element(
                                             name   = 'DT_PLANT'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
*      Build and Fill Child node4 DT_QTY for parent DT_DEMANDTEC
    ivalue              = wa_source-QTY.
    l_element_DT_QTY     = O_document->create_simple_element(
                                             name   = 'DT_QTY'
                                              VALUE = ivalue
                               parent = l_element_DT_DEMANDTEC ).
endloop.
* render document ======================================================
* create output stream
o_istream = l_streamfactory->create_ostream_xstring( result ).
*   Connect internal XML table to stream factory
o_istream = l_streamfactory->create_ostream_itable( table =
l_xml_table ).
renderer = o_ixml->create_renderer( ostream = o_istream
                                          document = o_document ).
irc = renderer->render( ).
"   The Statement CATCH define a block that catches the exceptions of the
"   exception class cx_sy_ref_is_initial
    CATCH cx_sy_ref_is_initial INTO o_exception.
" If you need to get the error message text do as follow
DATA errorMsg type string.
" Get the message text
errorMsg = o_exception->GET_TEXT( ).
" Display the error information
MESSAGE errorMsg TYPE 'I'.
ENDTRY.
The TRY block defines a guarded area whose class-based exceptions can be caught in the subsequent CATCH blocks. If no exception occurs in the TRY block and it reaches its end, the system continues the processing after ENDTRY. If a class-based exception occurs in the TRY block, the system searches for an exception handler in the same or an external TRY control structure.
Font: SAP Help
You can see a how to create and use an exception in this example [ ABAP Objects - Defining a Class-based exceptions|https://wiki.sdn.sap.com/wiki/x/19w] .
Best Regards.
Marcelo Ramos

How to handle rpc/encoded style messages using BizTalk?

I am integrating with a lot of services and one of our customers has a service with rpc/encoded style
I could consume and generate schema from their wsdl file via BizTalk consume WCF wizard.
Once I am trying to call the service with request message that generated from the schema, it is giving an error that can not desterilize the first element of the message.
No Deserializer found to deserialize a 'FieldName' using encoding style 'null'
I compared the stub xml request message from SaopUI and I noticed that the xml expecting the data type with the element like this .
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama soapenv:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<sozlesmeNo xsi:type="xsd:string">?</sozlesmeNo>
<bankaKodu xsi:type="xsd:string">?</bankaKodu>
<anahtar xsi:type="xsd:string">?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
On the other hand, I got the request of the message from Fiddler using the BizTalk , and the generate xml of the BizTalk schema without the data type.
<soapenv:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsb="WSBanka">
<soapenv:Header/>
<soapenv:Body>
<wsb:bnkBorcsorgulama>
<sozlesmeNo>?</sozlesmeNo>
<bankaKodu>?</bankaKodu>
<anahtar>?</anahtar>
</wsb:bnkBorcsorgulama>
</soapenv:Body>
</soapenv:Envelope>
In SoapUi, if I remove a datatype from the message, I will get same error from the BizTalk request.
I read some articles that rpc/encoded style are not supported but I am not sure and these articles are not clear.
I also read that it was supported with Soap adapter but now it is deprecated.
So, Is there any one has an experience in rpc/encoded style messages and how to handle these message in BizTalk or is there any work around to handle these messages?
Your inputs really appreciate it.
Thanks in advance,
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer

Hi,
Please refer to the document which might help you:
#RPC/Encoded Style
http://www.c-sharpcorner.com/UploadFile/martinkropp/DesigningInteroperableWebService11232005044847AM/DesigningInteroperableWebService.aspx

How to handle special characters in NWDI

Dear All
I am trying to update the Description from JSP form. Through JCO we are calling the RFC of ABAP. We are passing these description from Java to RFC of ABAP and this RFC update the text in Database.
We have noticed that if there is some special character in description like as : or , complete description is not getting updated in to the SAP database.
Can anyone help me how to handle these special characters in Java. There may be N number of special characters. We want to generalize it. We want to replace these characters by s and z respectively.
For example : We want to update this description.
APPLERR H'4301 H'FA03 H'254C na Zagreb TC4 rijeen je cleaning procedurom, te je i kroz CSR odgovoreno da trap korekcija N01TCADG-0052 u bloku UPDC vie nije potrebna, te se moe izbaciti (AP143).
Uspjeno su zavrene HR17/CN-A3 FOA-e na tranzitnom nivou, te slijedi roll-out u dva termina 12/13.04 i 19/20.04. ETK je na sastanku isporučio SW, te ALEX i mini PLEX za sve objekte.
AP147. Poslati finalnu dokumentaciju za uvođenje paketa (implementacijsku instrukciju i sve popratne datoteke).
WHile updated text is as follows :
APPLERR H'4301 H'FA03 H'254C na Zagreb TC4 rije
N01TCADG-0052 u bloku UPDC vi
Uspje
sastanku isporu
AP147. Poslati finalnu dokumentaciju za uvo
Regards
Bhavishya

Hi Bhavishya,
Apparently your SAP database isn't configured to support Unicode. That would be the first solution to your problem, but I can imagine it's a bit drastic to convert your DB.
A second solution would be to encode the input description to ASCII before storing it in the database. When reading from the database, decode again to Unicode. This way, no information is lost. A suitable encoding would be Base64. e.g.
String description = "unday ebra";
String descriptionBase64 = new sun.misc.BASE64Encoder().encode(
description.getBytes("UTF-8")); // ""
// store descriptionBase64 in the DB
// later, when reading descriptionBase64 from the DB
String description2 = new String(
new sun.misc.BASE64Decoder().decodeBuffer(descriptionBase64), "UTF-8");
Instead of using Sun's implementation, a better alternative is to use the open source implementation
org.apache.commons.codec.binary.Base64 from Commons Codec .
The 3rd approach is indeed to normalize the description by replacing all special characters with their ASCII equivalent. A rather easy solution is as follows:
String description = "unday ebra";
String descriptionNormalized = sun.text.Normalizer.normalize(
description, sun.text.Normalizer.DECOMP, 0).replaceAll(
"[^p{ASCII}]", "");
sun.text.Normalizer decomposes the string, e.g. "éàî" becomes "e´a`i^", after which non-ASCII characters are being removed using a regular expression.Again, note that it's usually a bad idea to use sun.* packages, see note about sun.* packages. The above code only works with J2SE 1.4 and J2SE 5.0, but it breaks in J2SE 6.0 (where
java.text.Normalizer became part of the public API ;-). A good open source implementation can be found here: ICU4J (com.ibm.icu.text.Normalizer).
Kind regards,
/Sigiswald

How to handle spaces in string?

Similar Messages

Maybe you are looking for