How to handle the CRM Middleware after system refresh?

Guys,
We are using CRM 5.0 & R/3 4.6C. We have the middleware configured and set up. We finished all inital loads & delta loads are activated as well. The system works perfectly.
Now for some reason the client wants to refresh the R/3 system. (Basically they are copying over the R/3 Dev system to refresh the R/3 Sandbox system. Our connection is currently between the 2 sand box systems) What impact will this have on the CRM system? Will it cause mass delta downloads? I have already referred to notes 588701 & 765018. Any additional information or watch outs will be appreciated.
Secondly what's the best practice do a refresh in the future? Is there a SAP recomendation on how to go about with system refresh when CRM & R/3 are connected?
ARP

Hello ARP,
as always: It depends what to do:
a) do you have a CRM DEV System available? If possible you should get the connection working over there and then do a Landscape Copy of the R/3 DEV + CRM DEV to the Sandbox Landscape.
b) Let them copy the R/3 DEV to the R/3 Sandbox. Then use the Data Integrety Manager (Transaction SDIMA) to get the missing Customers, Transactions exchanged.
In the future they normally have to do a Landscape Copy.
Regards
Gregor

Similar Messages

How to handle the call transaction in method of a custom business object

Hello all,
There is a custom report " RPTCORAPP" for approving leaves . As per my requirement i have develop a copy of leave workflow and for approval process i have call "RPTCORAPP" in Custom method of custom object. i have made a transaction for this custom report for approving attendances. I am calling this method though call transaction statement within method.
Problem: while approving the attendance workitem is not disappearing from the portal. Problem is due to call transaction statement.
               once workitem come to the user, user click on it. control goes to the report, which display all the leave to approve on
               the portal.
               If after approving/ rejecting attendance user close the screen.workflow remain in the "process" status.Control wont come back after call transaction statement in the method.
             At the same time if user clicks on back button inspite of closing the screen. it is working fine. workitem disappears from the portal.
How to handle the scenarion. if after approving/rejecting, i want the control to come back to the NEXT STATEMENT after call transactionstatement in my method.
Please help it out........:)

Hi swami,
thanks for reply. but i am not using BDC in my method. iam just calling a custom transaction thriugh statement
Call transaction 'ZHR_APPROVE_CLINOUT'. This transaction directly run the report RPTCORAPP and display all the request.

How to handle the OK button of the parameters prompt of a crystal report

Hi,
how to handle the OK button of the parameters prompt of a crystal report in vba.NET?
I want to use the parameter prompt from the crystal report itself and I want to know when the report is ready. I need to export programatically by sending email to a list of employees after the parameters has been set. The emails I send depends on the results of the report.
Im using a CrystalReportViewer control in VS2010 and Crystal Report for VS2010 v13.0.1.220.

Right. But the parameter screen is driven by the viewer. Unless you create your own parameter screen and pass the parameters to the report via code.
Another thing I am not sure about:
"Then by code I want to read all the employees id from the report and send email to them with specified pages of the report. (1 page per employee)"
How do you plan on reading the employee ID from the report? I am not aware of any API that will read a value in a report so that you can then decide what page to send to whom.
I think you're approaching this kinda backwards. A question to ask is; can you do what you are trying to do in code in the CR designer? If not, using APIs will not work either. I suspect your approach should be a report that uses an employee filter. Run the report for employee x, get the report populated with the data for that employee and email it. Repeat for employee x1, employee x2, etc.
- Ludek

How to handle the extended vo in the extended controller

Hi,
I want to know how to handle the extended vo attributes in the extended controller.
I extended CompetenceElementsVO as 'CompetenceElementsEx' with 2 transient attributes called col1 and col2.
Here i want to pass value according based on some condition. for this i want to know how to handle these attributes.
I tried by using the extended vo name in the controller, if i use means then it is throwing error after the extended controller is implemented.
Same time if i try to refer this attributes from the original vo definition, jdev itself showing error.
please tell me how to handle this?
Thanks in advance,
SAN

Hi San,
You have to extend the controller where your region is associated with,
And in that controller you get the AM(if there is more than one AM and your VO is associated with a child AM, first you have to get your required AM) and then
get the ViewObject(standard).
Then you should be able to get your newly added attributes.
Please find the below sample code to get the AM handle and VO from there, update the code according to your requirement,
     Get all the VOs under the Root AM
     writeLog(pageContext, "Room AM"+ pageContext.getRootApplicationModule());
String[] rootViewNames = pageContext.getRootApplicationModule().getViewObjectNames();
/* writeLog(pageContext," Length of the VOs from Rootm AM "+rootViewNames.length);
for (int j =0 ;j<rootViewNames.length ;j++ )
writeLog(pageContext,j +" Value "+rootViewNames[j]);
     // Get requested AM from Root am
public OAApplicationModule getRequestedAM(OAPageContext pageContext, String requestedAMName)
writeLog(pageContext,"Requested AM called to check the AM "+requestedAMName );
String amName = "";
String objectivesAMName = requestedAMName;//"ObjectivesAM";
String nestedAMArray[] = pageContext.getRootApplicationModule().getApplicationModuleNames();
pageContext.writeDiagnostics(this,"Root AM=>"+pageContext.getRootApplicationModule().getName() + " Child AMs=>"+ nestedAMArray.length,1);
OAApplicationModule currentAM = null;
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule();
for(int i = 0; i < nestedAMArray.length; i++)
amName = nestedAMArray;
pageContext.writeDiagnostics(this,"Nested AM Name=>"+amName + "and amName.indexOf(objectivesAMName) "+amName.indexOf(objectivesAMName),1);
currentAM = (OAApplicationModule)pageContext.getRootApplicationModule().findApplicationModule(amName);
                    //Get the view names
               String[] viewNames = currentAM.getViewObjectNames();
for (int i =0 ;i<viewNames.length ;i++ )
writeLog(pageContext,i +" Value "+viewNames[i]);
if(!(amName.indexOf(objectivesAMName)==-1))
pageContext.writeDiagnostics(this,"Found Handle to My Nested AM " + amName ,1);
break;
return currentAM;
Get the VO from the AM
OAViewObject objAssessmentVO = (OAViewObject)yourAM.findViewObject("yourVO");
Thanks.
With Regards,
Kali.
OSSi.

How to handle the Timestamp datasource while migration

Hi All
" I tried searching the forum,but didnt get the relevant one,hence posting this question".
While migration from 4.7 to ECC in R/3 system,
how to handle the Timestamp datasources( especially FI like COPA and other ) while extarcting the data from source to BW during source system migration.Since we need to empty the delta queue and should make sure that there are no delta records exists in delta queue.
Like for sales datasources using LO,we will be executing the V3 jobs for execting the LUW's from LBWQ to RSA7? In the same way is there any particular way for this also.
Anyone whi knows abt this pls share your views
Regards
Shankar

Hello Shankar.
Before the upgrade (import of a queue), all extraction queues and open
update orders in all clients must be processed. The content of the setup
tables must be deleted. To avoid problems during the upgrade or to
correct them, carry out the following steps:
1. Call transaction SMQ1 and check whether all queues in all clients
(client = '', queue name 'MCEX') have been processed. To process the
queues, start the collective run report for each application in the
displayed clients. If you no longer need the data in the BW system,
deactivate the relevant extraction queues and DataSource in the LO
cockpit (transaction LBWE) and delete the queue entries in transaction
SMQ1.
2. If you use the V3 update that is not serialized (usually only for
application 03): Start collective run report RMBWV303. Then check the
update orders in transaction SM13. If there are incorrect update orders
in transaction SM13, correct the orders and then start the collective
run report again. If you no longer require the update orders, you can
delete them. There may be inconsistencies between tables VBMOD and
VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute
report RMCEX_SETUP_ENTRIES to find out which setup tables still contain
entries. You can use transaction LBWG to delete the contents of the
setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade
or when you import a Support Package does not display all affected
applications. Therefore, Note 1083709 provides a check report that you
can use to determine all affected applications and tables or queues.
More detailed information please check these following notes:
1083709-Error when you import Support Packages
1081287-Data extraction orders block the upgrade process
I hope I can be helpful.
Thanks,
Walter Oliveira.

How to handle the situation to forward work item manually?

Hi All,
In my workflow -
For agent determination I have some custom logic to determine agents. If custom logic donu2019t return any agents then the requirement is work item needs to send back to workflow initiator.
My issue-
When no agent determines
1.Work item needs to send back to workflow initiator - and he should not able to Approve or Reject work item - He Can only forward work item to any other person manually (he determines to whom it should forward).
2. After manually forwarding the work item it is normal process 2 level of approval from that point .
Please let me know for the first item how to handle the situation?
I have developed 2 section - one goes with regular agent determination -
and the other one when no agent determines then I am assigning back to workflow initiator. Now I want to handle that - initiator should not accept or reject and he can only forward to someone. How to develop this?
Please let me know your thoughts.
Thanks in advance.
Rajesh,

Hi All,
Thanks for the answers.. sorry for late replay.. requirement was not confirmed.
1. As I described in my question
After my custom conditions.. I have to send workitem back to initator ( Now initiator forwards the work item to someone else ( need to restrict users based on role - )..
While doing this process initiator should not have access to approve or reject he should only forward the workitem.
After forwarding the work item -this person should have approve or reject options.
My question is not answered..
1. As Vijay told..
Dont give Approve and Reject Options and in Description u specify like
If I dont provide approve/reject when I am sending the work item to initiator - After initiator forwarding this work item - how do we the other approver will get options Approve and Reject?
2. AS -surjith kumar
If your Using the Rule or Expression you have to restrict via coding - This will solve one of my problem -
How I can restict users with role based?
My problem is not solved.. Initiator should not have access to approve but He should only forward the work item...
Please let me know...

How to handle the master data when we are loading the from multiple clients

Hi,
We are loading HR data from two different clients 101 and 102 of same source system.
Here we are facing the problem with msater data maintenance for employee in BW, whose employee numbers are same.
For example client 101 employee range is 10001 to 10100.
In client 102 also same employee range.Then how to handle the above scenario
Is there any solutions apart from compounding of infoobjets with logical system.
Thanks in advance for your sugessions.
Thanks.
Maria.

Hi ,
you can create copy of 0EMPLOYEE Object.
Load one client master data to the copied object.
Example:
1. Create ZEMPLOYEE copy of 0EMPLOYEE.
2. create the transformation or rules
3. You have to follow same for remaining objects
regards,
HREDDY

How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.

How to clean the windows registry after an unclean install or previous SP2/SP1 uninstall.
<b>Procedure:</b>
Run regedit -
1. Go to HKEY_LOCAL_MACHINE\Software and delete iPlanet folder,
2. Go to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services delete the entries for : adminXXX-serv, iAS60, slapd4.1, slapd-servername.
Run regedt32 -
1. Go to HKEY_LOCAL_MACHINE/SYSTEM/ControlSet001/Enum/Root changed the permission for key LEGACY_SLAPD-xxx from security, and delete it, check in other controlSet (002/003) also, including currentControlSet.
If you are cleaning the Registry after an uninstall, than after cleaning
registry delete the iAS home dir and "reboot" the computer.

Sanjeev:
Maybe you can help. I haven't been able to resolve this one "small" problem which is preventing me from rolling out iWS6.0 SP2. I created a new instance of the server using "Add Server" so that I have 2 Web sites (e.g. test1.domain.com and test2.domain.com), but the 2nd server instance is pointing to the same HTML location as the first (i.e. http://test2.domain.com takes you to the same location as http://test1.domain.com). What do I need to change and where to fix this? Need a VERY quick answer to this to implement a production Web server. I've tried the suggestions made so far (see: http://softwareforum.sun.com/servlet/ProcessRequest?RHIVEID=181&RPAGEID=135&HOID=50B500000008000000966A0000&UCATEGORY_0=_23_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_QUESTION_0=server+instances&USEARCHCONTEXT_QUESTION_S=0) but nothing has resolved this problem. If you have any ideas at all, I'd appreciate if you could let me know :)
Thanks!

How to handle the drop event

Hi everyone,
Now I'm developing the function about drag-drop source(image & text) from Panel Tree to the document.
I also have a look at the basic drag/drop & Panel Treeview, but all of them is not the source code mentions to how to handle the drop event, almost about drag event only.
Now when user Drags(image, text) from PanelTreeView(example) and drops them to document and then new page Item contains source(image, text) created, so I want to get the page item after drop event.
so anyone know about this please give me suggestion
thanks so much.

i dont think you can.
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
keyoke_za wrote:
> Hi,
> How can I get my flash movie to handle the drop event
when dropping objects from outside the flash window.
> Thanks for your help..

How to identify the related job, after sheduling a infopackage?

Hi,
Anybody explain that how to identify the related job after scheduling a infopackage in the BW system?

Hi Aditya,
Goto SM37->Search Job BI_BTCH*
Job Prefix.
http://help.sap.com/saphelp_nw70ehp1core/helpdata/en/da/0318025d64a84b94542641ed77ee74/content.htm
Hope it helps.
Thanks and Regards,
MuraliManohar.
Edited by: Muralimano on Jun 5, 2011 9:38 AM

How to handle the control records in case of file to idoc scenario.

Hi All,
can you please clarify me how to handle the control records in case of file to idoc scenario.

Hi,
In File to Idoc scenario even though you selected apply control record values from payload and you are not getting those correct values which you have provided in the mapping.
Also check the checkboxes Take sender from payload and Take receiver from payload along with the Apply control record values from payload checkbox
Regards
Seshagiri

How to handle the different pricing conditions changes in BI.

Dear Friends
can any one send me Regarding
How to handle the different pricing conditions changes in BI.
Thanks & Regards
Ramana

Hi,
Take a look at the 0sd_o06 ODS and 2lis_13_vdkon datasource for sales billing conditions.
http://help.sap.com/saphelp_nw70/helpdata/EN/36/8188408bc0bb4de10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/7f/0f8c4037fba62be10000000a1550b0/frameset.htm
Regards.

How To Display the directories of a System.

How To Display the directories of a System.

Hmm I think you need to be more specific. Do you mean like this:
File f = new File("c:/");
File[] fs = f.list();That lists all the files in that folder, then you can use the method isDirectory to check it. Mind you, you would have to go though every folder.

How to take the data from sage system to sap r/3

hi expects,
how to take the data from sage system to sap r/3? which adapter is to be used?what is the format of data in sage system?how the scenarios will work ? please help me in solving this problem?

hi rohit,
the data transfer can be done by using SOAP adapter
do chk this link
http://www.sage.org/lists/sage-members-archive/2001/msg01718.html
http://www.sage.org/lists/sage-members-archive/2001/msg01739.html
thanx
Sampath

How to handle the stale cheques in EBRS

Dear Guru's
Can any bady explain me how to handle the stale cheque cases in EBRS, and what are the possible transaction codes using for that.
Any help can be greatly appreciated.
Regards,
kishroe

Hi
any bady know about this plz respond.
Thanks in Advance
kishore

How to handle the CRM Middleware after system refresh?

Similar Messages

Maybe you are looking for