How to handle vertical picture for creating wall paper

I took many pictures (raw) during a recent festival. Most of pictures were taken in standard horizontal format but some of them were taken in vertical orientation for a little tall objects. After processing those pictures with LR5, they were exported in format as shown in the attachment. They were mainly used for creating wallpaper or screen savers for my computers. Most of pictures looked just fine and shown nicely all in the screen but vertical pictures (pictures taken in vertical position) were all out of screen. Those vertical picture must made different image sizing. Could someone advise how to set those vertical pictures for export to show all on computer screen?

Because of the pictures taken during festivals, I am now spending more time to get nice wall papers for my win 7 and 8 computers. I now found that it wais not that easy task. Except for vertical pictures, I just noticed that a little bit of top and bottom parts were cut off in the both screen saver and wallpapers. The problem is due to aspect ratio of pictures. I use Nikon D7000 camera to take raw pictures. In order to get perfect wallpapers and screensaver, I got to make a different aspect ratio after pp-ing in LR5. That is too much head ache. I like to keep 2:3 aspect ratio for printing in 4 x 6 papers. Again aspect ratio must be changed to print on 8.5 x 11 papers.. It is too much hassle changing aspect ratios for so many pictures.. I decided to forget about some parts of top and bottom for wallpapers. I decided not to take vertical pictures anymore. I am learning hard way.

Similar Messages

I can't figure out how to resize my picture for my home or lock screens.

I can't figure out how to resize my picture for my home or lock screens. It shouldn't be his difficult. Any suggestions? I'm running the latest software. Thanks.

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

How to print vertical lines for line items?

hi experts,
                can any one tell me how to print vertical lines for line items in ascript?
ive tried using sy-vline but its printing jus one line each for each item .i want it in columns ?if there are any control commands plz let me know how to print?
thanks &regards
narendar

hi narendar,
Welcome to SDN.
   u can go for box command.
Use the box command with zero width for vertical lines.
Position the line by x position and y postion.
syntax :
BOX <xpos> <ypos>
       <width>
      <height>
      <thickness in twips> twips.
Regards,
Arun.
Reward points if useful.

How do i unlock pictures for my slide show?

how do i unlock pictures for slideshow? do i have to save them? where?

Which operating system are you running on?
Which version of Photoshop Elements are you using?
If you have made changes to a photo, those changes have to be saved before you can use that photo in a slideshow. Where you save it is really up to you.
Do you use the organizer and import all your photos into it? Please note that Elements itself does not keep a copy of your photos - you always have control over where the photos are stored. The elements organizer just saves the links to your photos.
If you have selected a photo in the organizer and then selected edit, the editor will open and you can make your changes. While the photo is open in the editor, it is marked as locked in the organizer. When you have finished editing the photo, save it and the close it in the editor. The lock in the organizer is then released.
I hope that helps you. If you still have a query, please tell us how you are working and we may be able to provide other advice.
Brian

How to reduce scale at installation of wall-paper by iPad?

How to reduce scale at installation of wall-paper by iPad?

If you go in through the photos app you have a bit more control, but not a lot.
FIrst, go into the control panel, accessibility and turn off the parallax motion. Then go into your photos app, find the image and 'send' it to be wallpaper by tapping the box with the arrow poking out of it.
The higher resolution your image is the more control you'll have. The default is that the whole screen must be covered and iPad screens are 1024 x 768 or larger, so if you have a 300 x 400 pixel image, you won't have much control at all but if your image is - pixel wise - larger than your screen, you'll have more wiggle room.
It's not perfect and isn't as much control as it used to be, but you'll have more than just going in through the wallpaper controls.

How to handle "Validation failed for the field - Tax code" issue?

We had mass uplaod the order that create on Mar with tax code effective date on Apr. Now we would like return on this order and getting error of "Validation failed for the field - Tax code". How to handle this issue?

Hi
You will have to check if the Tax_Code of RMA being received is the same as the one in the related sales order.
If not you will need to use the same tax_code.
Refer below document : Doc ID 1584338.1

Handling DB sequences for create and commit actions on ADF tables

Hello,
Most of the tables will have sequences used for primary keys and there will be columns like created_On and created_By columns. But my table does not require user inputs for these columns. So when commit button is clicked on the table how to handle these columns. The commit action should refer the sequence and enter SYSDATE and username for created_on and created_by columns.
what is the workaround for this ?
Thanks.

Use groovy expressions as default values for the EO fields - adf.currentDate and adf.context.securityContext.getUserName()
For the sequence see the ADF documentation:
http://docs.oracle.com/cd/E16162_01/web.1112/e16182/bcentities.htm#sm0147

How to cummulate sales orders for creating one planned order.

Hello friends,
My scenario is make to stock. I use sales orders for creating plan only. I want to cummulate all sales orders of one finish material and create one planned order for that material when i run mrp. How can i do this?
Thanks

Kiran,
What is the planning strategy you are using?
Does all the sales order requirment same? If it is same then it is possible. Please explain more in details. If not you need to look at using some perodic lotsize procedure to combine requirments. Like "Daily", Weekly" "Month" etc..
Regards,
Prasobh

How to handle vertical format - 720 x 1280

What is the best way to output to 720 x 1280 vertical format? I have a video I want to display in a right column of a web site but the question would be the same for producing product promos such as what you see at WalMart.
Premiere Pro CS5 (shooting with iPod touch or T2i sideways)

Sounds simple enough, of course. That works right up to the point where I need to export it, then no matter what I do, it comes out either in a very large vertical picture frame or nicely balanced in a landscape. At the exact point where I need to customize the dimensions, it won't cooperate. It either slams it back into landscape mode or shrinks the video inside a large black box.
I was thinking I might need to twist it sideways, send it out to a monitor that is twisted 90 degrees and then try to put it all back somewhere later on. Everything I try eventually goes the wrong way. I have 3 sequences so far and each one hits a problem at some point. More trial and error.
These poeple who do the in-store can do it so there has to be a way. I just haven't figured it out yet.
Thanks for the quick Sunday afternoon reply, by the way.

How to assign the role for created user thru dynpro App

Hi All
How to assign the role for currently created user from Webdynpro App.
when i enter into the portal after creating the user
i am getting the following messgae in the portal
"No portal roles are assigned for this user.If this problem persists, contact your system administrator."
how to assign the user defined role for the created user from dynpro App
Regards
Dhina Kar J
Edited by: Dhinakaran Jeyachandran on Feb 1, 2008 12:19 PM
Edited by: Dhinakaran Jeyachandran on Feb 1, 2008 12:35 PM

In the User Administration section of your portal find your newly created user and below select "Assigned Roles" tab then press <Modify> button and look through available roles on portal then just simply add and save. But if you want to do it programmatically see below:
IUserAcountFactory userFactory = UMFactory.getUserAccountFactory();
// IUser - read only but with IUserAccount is possible to set up user data
IUserAccountSearchFilter userFilter = userFactory.getUserAccountSearchFilter();
userFilter.setLogonUid("superuser", ISearchAttribute.LIKE_OPERATOR, false);
ISearchResult sr = userFactory.search(userFilter);
for (final Iterator i = new PrincipalIterator(sr); i.hasNext();) {
IUserAccount user = (IUserAccount) i.next();
Execute the same search for IRole (or IGroup if needed) get the unique id of them and use newRole(...) and addUserToRole(...) methods from IRoleFactory.
Of course you don't need search for this principals if you know uniqueness of them. Use appropriate factories to get'em all by this unique id.
All the features see in [javadocs|http://help.sap.com/javadocs/NW04S/current/se/index.html]

Workflow for creating a very large collage for a wall paper

I have a bunch of photos shot with a canon t4i. My plan is to blow up all the photos and make a collage to print out on wall paper for a wall. I shot all of these photos in RAW. The dimensions of the wall are 101h x 106w. Yes, this collage bogs down my computer to the max. Its ridiculous. But anyways, I am having trouble retaining sharpness in my photos on my collage. I am a beginner with editing raw photos so that might be a problem.
This is what I did.
Open new photoshop (101x106")
Edit all photos in camera raw
drag photos from bridge on to photoshop
place and adjust size of each photo
what would you do differently to retain sharpness? It is important that it looks as best as possible because it will be in a small room in the foyer of our office.
Thanks,
Riley

I see two problem. On the print size exceed all the printers I know of. The widest printers that Epson make can only print 64" wide. Even if you cut your collage into two with some overlap for alignment. It would be a nightmare applying 54" wide wallpaper to a wall. There might be a third problem with cost a Epson printers that can print 54" wide rolls starting price is $10,000.00 and go up to $25,000.00. Expensive wallpaper. And you still need the paper and ink.
For a collage that large you do not need to print at 300 DPI for you will not be viewing the wall that is big and over your height up close where the human eye can resolve down to 300 dpi. In you collage you also show only three image across the top row. Some wider the others. Look at your Cannot T4I the would mean some image would be printed between 35" to 40" wide. without interpolation your 18MP images printed that size would meant they would print in the 130 to 150 DPI range. To interpolate from 130-150 to 300 would requite increasing the pixel count in the range of 400 to 500 percent. That is a lot of interpolation. I would not do that. I would actually create the collage at 150 DPI. That resolution should be good for an image that large. That Collage would not tax Photoshop as much. The 300DPI collage image would be 106x300x101x300=963,540,000 at 150DPI the same image would be 106x150x101x150=.240,885,000 the is 1/4 the number of pixels.
I would flatten the collage and cut it into 7 ovelaping stripts around 16" wide

How to handle SQL code for Daylight Savings for MST Time zone

Hi,
1. My time zone is MST. My data showing differently as day light saving started from November. Please help me how to handle these issue.
2. After Mar 09 2014 Daylight saving going to end.( For this how to handle in the SQL codes)
Please answer for the above 2 doubts.
Thanks in advance.
Regards,
LuckyAbdul

Hi Abdul,
Daylight saving is basically like switching to another timezone. If your normal time zone is Mountain Standard Time (MST), you will switch to Mountain Daylight Time in the summer.
If daylight saving or timezones are a concern. It is best to store your dates in a DATETIMEOFFSET(0) column. This data type includes the offset between your selected timezone (MST or MDT) and UTC. The offset between MST and UTC is -7 hours and the offset
between MDT and UTC is -6 hours.
Be sure to datetimeoffset(0) and not just datetimeoffset. datetimeoffset(0) uses 8 bytes to store it's data (same as datetime), but datetimeoffset uses 10 bytes. This is especially important if you are going to index this column.
Also be sure to use a similar data type in your application or the timezone information will be lost. If it is an .Net application you should use The DateTimeOffset type. Most other programming languages have equivalent types.
Hope this helps. If you have anymore questions please let me know.
For more information see:
http://msdn.microsoft.com/en-us/library/bb630289.aspx
http://msdn.microsoft.com/en-us/library/ms187819.aspx
http://msdn.microsoft.com/en-us/library/system.datetimeoffset%28v=vs.110%29.aspx

Updated to ios7 how do I resize picture for my wallpaper

Can some one tell me how I resize picture for wallpaper.
Once picture is in place it won't let me move am
Pond scale

On what iDevice?

HOW TO KNOW THE TCODE FOR CREATING A NEW ENTRY IN A PARTICULAR TABLE

HI,
CAN YOU PLEASE LET ME KNOW THE PROCEDURE TO GET THE TCODE FOR CREATING A NEW ENTITY IN A TABLE .
EG: IS THERE ANY PROCEDURE TO KNOW THAT IF I CREATE A NEW ENTITY IN MM01 IT WILL BE STORED IN TABLE MARA.
THANKING YOU.

Hi Venkata,
If you want to know, for a given table, which transaction/program(s) will create a new record, there is no easy procedure, other than to refer to experts who deal with these programs.
It is possible to get a list of programs that refer to a table. SE11, select the table, select the 'where-used' icon, select programs, execute. You will be presented with a list of programs that read or write to that table. From that list you would have to determine which one(s) create records, using your ABAP skills. From those selected programs you would have to find which, if any, had a transaction assigned.
Many tables are updated by more than one program/transaction. Many other tables are not updated by ANY interactive transaction.
If you ever decide to go ahead with this research, make sure you publish it. You could probably make yourself a bit of money.
Regards,
DB49

How to shrink vertical photo for slide show

I am in aperture 3 and cannot shrink vertical photos for slideshow. The tops get cut off when I play the slideshow...help!

In the Slideshow Editor, on the Display Settings Panel, click "Default Settings" and make sure "Crop" is set to "Fit in Frame".

How to handle vertical picture for creating wall paper

Similar Messages

Maybe you are looking for