How to have buttons come in 2 seconds after menu??

I have a sound effect and animation for the first 2 seconds of the DVD menu. I'd like the buttons to appear after that's done. Is that possible? How?

Do you mean the buttons itself (the graphic element) or just the overlay image?
You can delay the appearance of the overlay graphic setting the menu *Loop Point* to 2 secs.
About the button itselfs, the image that represents the button, you must manage it in your animation.
Hope that helps !
Alberto

Similar Messages

How to have button in down state as page opens

On opening a new "blank" subsidiary page using "getURL",
there are 2 buttons on the new page. Each button plays a moveclip.
(The first movieclip is already playing as the new page opens). I'd
like to have the corresponding button already in the down state as
the page opens. Is there a conditional statement I could use for
this? I'm using AS 2.
The code on each button is as follows:
on (release){
_root.resetButtons();
this.gotoAndStop("down");
on (rollOver){
if (this._currentframe <> 3)
this.gotoAndStop("over");
on (rollOut, releaseOutside){
if (this._currentframe <> 3)
this.gotoAndStop("up");
Many thanks for any advice.

Yes, but you'll have to make a bunch of changes. If you
convert your buttons to movieClips and insert frame labels and
actions, you can get the resulting movieClip to act as a button.
Then you can tell one of the button/movieClips to
gotoAndStop("_over"). It will then start that way and then work
normally after it is used. Look at
http://help.adobe.com/en_US/AS2LCR/Flash_10.0/help.html?content=00000230.html,
for more information using a movieClip as a button.
Alternately, you could just put in a static graphic of the
button's over state in place of the button until it should show
normally, then swap out the graphic for an actual button.

How to Have buttons have multitouch

In IOS flash cs5 how do get it to do multitouch
if adobe say that the mouse is like a finger how can you do two fingers when there are only one cursor?
Reply ASAP

Yes i have the checked the helped files and this is my code
Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
// Pause Menu Start Up
PauseMenu.unpause_btn.addEventListener(TouchEvent.TOUCH_TAP, Unpause);
Buttons.Pause_Btn.addEventListener(TouchEvent.TOUCH_TAP, PauseBtn);
PauseMenu.visible = false;
function PauseBtn(event:TouchEvent):void
PauseMenu.visible = true;
function Unpause(event:TouchEvent):void
PauseMenu.visible = false;
/*Imports*/
import flash.ui.Multitouch;
import flash.ui.MultitouchInputMode;
import flash.net.SharedObject;
import flash.display.SimpleButton;
import flash.display.MovieClip;
import flash.events.*;
/*Stop*/
stop();
/*Varibles*/
var Curr_weapon:String = "pistol";
/*Start Code*/
function Left(e:MouseEvent):void
char.x -= 10;
char.scaleX = -1;
char.gotoAndStop(2);
function Right(e:MouseEvent):void
char.x += 10;
char.scaleX = 1;
char.gotoAndStop(2);
function OutsideStopU(e:Event):void
char.gotoAndStop(1);
function OutsideStopD(e:Event):void
char.gotoAndStop(1);
function CharacterAttack(evtA:Event):void
if (Curr_weapon == "pistol")
char.Char_weapons.Handgun.gotoAndStop(2);
if (Curr_weapon == "ak")
char.Char_weapons.AK.gotoAndStop(2);
function WeaponDecision(event:Event):void
if (Curr_weapon == "pistol")
char.Char_weapons.gotoAndStop(1);
if (Curr_weapon == "ak")
char.Char_weapons.gotoAndStop(2);
function DoubleFunctionATTACK(event:Event):void
if (Curr_weapon == "pistol")
char.Char_weapons.Handgun.gotoAndStop(1);
if (Curr_weapon == "ak")
char.Char_weapons.AK.gotoAndStop(1);
// Event Listeners;
addEventListener(Event.ENTER_FRAME, EnterFrame);
addEventListener(Event.ENTER_FRAME, WeaponDecision);
stage.addEventListener(MouseEvent.MOUSE_UP, OutsideStopU);
stage.addEventListener(MouseEvent.MOUSE_DOWN, OutsideStopD);
PauseMenu.Weps.slot1.addEventListener(TouchEvent.TOUCH_TAP, Slot1Handgun);
PauseMenu.Weps.slot2.addEventListener(TouchEvent.TOUCH_TAP, Slot2AK);
Buttons.left_btn.addEventListener(MouseEvent.MOUSE_DOWN, Lfunc);
Buttons.left_btn.addEventListener(MouseEvent.MOUSE_UP, Leftoff);
Buttons.right_btn.addEventListener(MouseEvent.MOUSE_DOWN, Rfunc);
Buttons.right_btn.addEventListener(MouseEvent.MOUSE_UP, Rightoff);
Buttons.Attack_Btn.addEventListener(MouseEvent.MOUSE_DOWN, AttackingFunction);
Buttons.Attack_Btn.addEventListener(TouchEvent.TOUCH_TAP, DoubleFunctionATTACK);
Buttons.Attack_Btn.addEventListener(MouseEvent.MOUSE_OUT, DoubleFunctionATTACK);
Buttons.Attack_Btn.addEventListener(MouseEvent.MOUSE_UP, AttackingOff);
Buttons.addEventListener(MouseEvent.MOUSE_OUT, onOut);
// Functions;
function EnterFrame(e:Event):void
scrollStage();
function stopchar(e:Event):void
char.gotoAndStop(1);
function Slot1Handgun(e:TouchEvent):void
Curr_weapon = "pistol";
function Slot2AK(e:TouchEvent):void
Curr_weapon = "ak";
function onOut(evt:MouseEvent):void
char.gotoAndStop(1);
removeEventListener(Event.ENTER_FRAME, Right);
removeEventListener(Event.ENTER_FRAME, Left);
removeEventListener(Event.ENTER_FRAME, CharacterAttack);
function Lfunc(el:MouseEvent):void
addEventListener(Event.ENTER_FRAME, Left);
function Rfunc(er:MouseEvent):void
addEventListener(Event.ENTER_FRAME, Right);
function AttackingFunction(er:MouseEvent):void
addEventListener(Event.ENTER_FRAME, CharacterAttack);
function Leftoff(e:MouseEvent):void
removeEventListener(Event.ENTER_FRAME, Left);
function Rightoff(e:MouseEvent):void
removeEventListener(Event.ENTER_FRAME, Right);
function AttackingOff(e:MouseEvent):void
removeEventListener(Event.ENTER_FRAME, CharacterAttack);
if (Curr_weapon == "pistol")
char.Char_weapons.Handgun.gotoAndStop(1);
if (Curr_weapon == "ak")
char.Char_weapons.AK.gotoAndStop(1);
function scrollStage():void
world.x += (stage.stageWidth * 0.5) - char.x;
char.x = stage.stageWidth * 0.5;
And ive tried putting multitouch on the attack_btn and left and right btns but it doesnt work on testing on ipod

How to have Firefoxhome come up on the browser

How do I have a home come up on firefox

See this: [https://support.mozilla.org/en-US/kb/How%20to%20set%20the%20home%20page How to set the home page]

How to have buttons in Interactive PDF slideshow?

Can you have an interactive PDF in InDesign with slideshow buttons that show previous and next?

Sorry, but slideshows are not a feature of interactive PDF. They can be used in Flash presentations or Digital Publishing Suite projects (DPS) but not interactive PDF.

How do I stop my iTunes crashing seconds after I've opened it?

Please help!
I have a HP Pavillion 15-e013tx laptop, with Windows 8. Recently I've had a problem. Whenever I opened my iTunes library, within seconds, the message 'iTunes has stopped working' appears, and I have no choice but to close the program. I have no idea why it's doing this! I have tried reinstalling the program, which didn't work, and don't know what else to try. Does anyone have any recommendations, or should I try calling Apple?
Thank you!

Hello there, Mateorocks.
The following Knowledge Base article povides some great troubleshooting steps for your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Particularly:
Troubleshoot issues on an iPhone, iPad, or iPod touch
If you haven't been able to connect to the iTunes Store:
Make sure your date, time, and time zone are correct in Settings > General > Date & Time.
Note: Time Zone may list another city in your time zone.
Make sure that your iOS software is up to date by tapping Settings > General > Software Update (iOS 5 or later) or connecting your iOS device to iTunes and clicking Check for Update on your device's Summary page.
Check and verify that you're in range of a Wi-Fi router or base station. If you're on a device with cellular service, make sure that cellular data is turned on from Settings > General > Cellular.
Note: If connected to cellular data, larger items may not download. You may need to connect to Wi-Fi to download apps, videos, and podcasts.
Make sure that you have an active Internet connection. You can check the user guide for your device for help with connecting to the Internet.
Make sure that other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Try resetting (turning off and then on again) your Wi-Fi router.
If the issue persists, try troubleshooting your Wi-Fi networks and connections.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Menu button highlights...25 seconds after menu already loaded!

I am not having a good day!
I go to my special features button click on it, it takes me to the proper menu, but no buttons are being activated...that is, 25 seconds later the first option finally gets highlighted! What in the world would cause this to happen?
-Mike

Check the inspector and where the loop point is. Buttons will not be available (the highlights or function) until the loop point
!http://dvdstepbystep.com/MOTION/25.jpg!

How to have resuse CS 6 standard key after crash ?

Hello,
I bought CS 6 standard.
My mainboard crashed so I replaced it with another brand ones.
After rebooting, Windows 8 was still running fine and CS 6 too.
However, Adobe installer is telling me I need a new product key !!!
I am also using CS 6 on a laptop, as it allows for 2 computers.
How can I have my 2 authorisation keys back ?
Please help !
Thanks in advance.

Contact support to reset activations. Swapping hardware counts as a new computer.
Mylenium

How to have it keep playing podcasts one after the other, automatically?

This may be a stupid question... I have a bunch of podcasts on my iPod. I find that when listening (through the "Podcasts" menu on the iPod, not a separate playlist I made myself), when one is finished, it stops and I have to pick it up and ask it to start the next one. How do I get it to just keep going (one after the other)?
Mike

the fiend wrote:
I think the video iPod only ever plays one at a time.
I see. Thanks for the info! At least now I know I'm not just missing a simple menu setting somewhere.
Are you (by any chance) saying that you have a video iPod, not a Classic?
actually I have both I have a Classic in my car, and a video one for travel. Both have the same issue but since it turns out they handle this differently, I wanted to know if the workaround posted for the Classic might have a counterpart in the video one... Thanks again!
Mike

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button and in charge the white screen comes for 2 second and goes

Because of low battery my iphone 5 got switched off and than its not starting by pressing the power button or by keeping it on charge. While charging a white screen comes for 2 second and goes away. This process continues till the phone is on charge. Please suggest how can I start my phone.

Hello Ritugor,
I would be concerned too if my iPhone was not powering on. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M.

Possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up

possible water damaged ipod shuffle, turns on and plays music, but have 3 seconds after turning it on to use buttons then they all lock up

I think that you need to get a new one. I got mine at http://www.prizerebel.com/index.php?r=1552886

Can't create apple id...account limit reached...i have just bought this iphone second hand.. how can i fix this problem please

can't create apple id...account limit reached...i have just bought this iphone second. how can i fix this problem please.

appleid.apple.com
^ There's your website, go there, create apple id, smile
https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/
There's the link part of it , Bigger smile

How to have a button to reset a field and not the whole form?

Hi,
Can anyone help me with this dilemma please? All tutorials online demonstrates how to have a button to reset the whole form, but i only want the user to clear 1 field in the form.
I have a form which has a field representing a persons name who has booked out a piece of equipment. I would like the administrator to be able to clear the field quickly without having to select the whole name and then delete it, ready to insert the name of another booker.
Any help would be very much appreciated. (If it is using dreamweaver features than that is better.)
Thank you!

There's nothing in DW that will do this for you.
This script from the internet seems to do the trick. Add this to the <head> section of your page...
<script type='text/javascript' src='http://code.jquery.com/jquery-1.7.1.js'></script>
<script type='text/javascript'>//<![CDATA[
$(window).load(function(){
function resetForm() {
$(this.previousSibling).val(function() {
return this.defaultValue;
$( "input[type='button']" ).bind( "click", resetForm );
});//]]>
</script>
Then add your form in the <body>...
<form>
<label for="textfield1">Text Field:</label>
<input type="text" name="textfield1" id="textfield1"><input type="button" value="reset" /><br />
<label for="textfield2">Text Field:</label>
<input type="text" name="textfield2" id="textfield2"><input type="button" value="reset" /><br />
<label for="textfield3">Text Field:</label>
<input type="text" name="textfield3" id="textfield3"><input type="button" value="reset" /><br />
<label for="textfield4">Text Field:</label>
<input type="text" name="textfield4" id="textfield4"><input type="button" value="reset" /><br />
</form>
EDIT: Ha! Same script as you found Nancy, posted originally at the exact same time too (I threw a couple modifications in)...
Good times, good times.

TS3672 Hi need help, when i am trying to compose any new sms, there is a old sms appearing by default on my phone, it so happens that i have to delete that sms and compose a new one, how can i over come this problem

Hi need help, when i am trying to compose any new sms, there is an old sms appearing by default on my phone, it so happens that i have to delete that sms and compose a new one, how can i over come this problem.
Regds.
Nagaraj

On my iphone, when I get into Messages, I see a list of message thread names and at the top right is an icon with a square and pencil coming out of it. If I tap it, I can begin composing a new message with having to deal with any others.
If on your screen you see one or more message "bubbles", then press the "Messages" button at the upper left to go back to the home page for messages. There you can tap the compose icon.

How to have buttons come in 2 seconds after menu??

Similar Messages

Maybe you are looking for